Counting matching models…
This model is similar to the one it remixes, but the magsafe puck is on the same axis as the 17mm ball joint threads. I am using it with a third party Magsafe charger that has a stronger magnet than the Apple charger, but has identical…
I created this remix because the original version was a bit larger than I needed, and I wanted to fit the cables in more snug. The original also broke when I went to attach the zip-ties, one bit snapped off. It was still usable, but I…
I haven't got to print this model yet as my printer is still a WIP, but it should be printable without support as the original design. Case can be printed using Voron PIF standard, but I recommend printing the bezel and accent with finer…
I wanted to be able to charge both the controller and the switch so I remixed @Marius_207716 and @3DBrooklyn to add this functionality. The screen is centered with this model and the regular Nintendo cord fits through the openings to…
Shelly Plus H&T Humidity & Temperature smart sensor mount using only one screw and centered. Sensor has mounting holes on the back but these are by design off center. This mount resolves that. Print with PLA, PETG or any material you…
As Eric said: This is a simple cover for behind the xLCD screen of your MK4 printer. However, the main model has one major flaw, which is the off-center alignment as the xLCD is not mounted symmetrically. With this remix I adjusted the…
A precise structural frame remix for the popular DIY Open Source SpaceMouse project. Components Used: Joystick Modules: Standard thumb joysticks used for this build can be sourced directly on AliExpress (Dimensions: 34mm x 30mm x 27mm).…
This print was inspired by a few similar models, but none of the ones I tried worked all that well. In particular, they all had one or several of these problems: Correct threads alignments. This knob screws on and off with ease, whereas…
For some reasons it wasnt centered on mine so I modified the file for it to fit the nozzle right in the center of the ring. EDIT: Was also slightly too big, I just noticed my support got enlarged, I updated the file with correct size, my…
I tested it on my two PrusaMini+ printers, and neither of them experiences this problem anymore. Before delving deeper into this, I want to emphasize that this problem isn't limited to just multiple objects on opposite sides of the…
In order to get better cooling for a conversion, I centered the 2 fans more in the Voron skirt. Since i installed an octopus board, which I rotated 90 degrees, the stock fan skirt did not blow directly onto the motor drivers. This model…
Rotated mount for filament runout sensor to fit in tight enclosure
openSCAD file to easily generate labels for the Ultimate Cereal Container Filament Drybox with centered text
This is a Centered CR Touch modification for your Ender 3 V3 SE. Designed for use with dual 5015 fan ducts and K1 hotend. Please follow all instructions below. If you still have the stock block style hotend on your printer this mod will…
I haven't printed or tried this yet.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hYssL5E5sIt Category: 3D Printing
The complete set of Stemfie3D slotted centered braces. get.stemfie.org x.com/stemfie3d
I needed a way to attach a new ring light to my webcam without any non-printed parts and came up with this snap fit mount. It doesn't need to resist much loading outside of the initial assembly, so any material with a bit of flexibility…
Exactly as the name suggests, this mount moves the extruder closer to the center of the X-axis, not enough to be perfectly centered as the original Lajbror creation, but enough that X-axis moves no longer have discrepancies in extrusion.…
George Hart has a bunch of amazing rapid prototyping geometric structures at http://www.georgehart.com/rp/rp.html These are the parts to make Face-centered Cubic Voroni Tetrahedron of various sizes. The pieces here have been scaled 7x and…
Designed with sdf2stl.saej.in Untested. Print at your own risk. Rendered with the following signed-distance function // exponential smooth minumum of a and b, with smoothing factor k. float smoothMin( float a, float b, float k) { float r…
Simple 2020 to 3030 aluminium extrusion profile connector for use with M4x10mm hexagon socket head screws (DIN912). Designed to connect 2020 to 3030 aluminium extrusion profiles with each other. There are 2 versions, 2030ConnectorCenter…
Aliexpress copy of Vitalii3D CNC Tap does not have a grove for magnet holder and it does rotate during assembly. (Original Vitalii3D CNC Tap has it and its no need to print this parts) This parts have a modded bottom part so it should by…
Periodic table (Crystal structure) https://en.wikipedia.org/wiki/Periodic_table_(crystal_structure) Hexagonal crystal family https://en.wikipedia.org/wiki/Hexagonal_crystal_family Cubic crystal system…
Added a small round "hole" so that it is easier to attach the magnets in the exact middle. Category: 3D Printer Accessories
Sony A7ii Gridfinity Holder remixed to have the camera sit more centered in the bin.
See original item: 221546. Neck was weakened to allow path for pin: I printed with 40% infill to try and compensate--this probably wasn't necessary. It seems plenty strong.
It's a snap-on fan mount similar to the stock E3DV6 mount for 3010 axial fans. Redesigned from basic shapes to fit a 4010 or 4020 fan. It comes with a mounting brace sized for Sovol SV01 or SV03 when mounted sideways as shown in the…
this design was made thanks to my brother. I was showing him all the designs and I said I got every option covered! and he said well... where is the centered one so thank AK for this one. bitchute movie link:…
I wanted my bike computer to be centered above the handlebar. The design is slightly raised, to allow for something like a handlebar basket to also be in place. Initially I wanted an “invisible” floating design, but it wasn't stable…
I wanted my spools in the middle instead of hanging from the side. Of course the print doesn't fit on a small Voron 0.2 but a Prusa i3 is perfect for the job. You need two hex nuts on both side but you should be able to add them easily by…
it will work with both T15 magazies types. to complete the adapter do you need 2 pins, and 1 spring Link to video: about the Dmag/TMC mag adapter. the TMC and T15 adapter looks very similar in design…
This is a fix for uneven extrusion on the Prusa Minis X-axis, originally researched by Lajbror . My mount is based on the Remix made by Russell B , made originally because I had warping issues with his design. The final version by me…
Remixed to center the excess when using on a triangular table or you just want the trash can centered in the body of the bambu's area. 8x3mm magnets
Adjustment spacer for the Eagle Lights LED Headlight Kit with Halo Ring for 2006 - 2012 BMW R1200GS
Must be used with the rest of the modular system from the original listing by @FruitieX found at this Printables link
I don’t have the budged at the moment to print this one out. But there should be no reason for this model to not work. If you like to print this one and be the cover art of this design than send me a picture of your marker with the magfed…
Could not find a 2 gang 1 centered decora plate in the mid size (125mm x 125mm) for purchase or print. I was able to modify one of @maxrys models to create a plate that fit.
The Planet Bike MicroMite 2.0 mini bike pump comes with a mounting bracket to hold the pump alongside a water bottle, but it only works to hold the bike pump off to the side of the bike. If you want to carry your pump in-line with the…
I edit the design from: https://www.thingiverse.com/thing:5445821 , but make the screen with equal spaces from the edges Category: 3D Printer Parts
Designed for creality 500x500 honeycomb with rubber corners. This version centers the honeycomb within the mechanical axes, it has four unique feet for the Right Front, Left Front, Right Rear, Left Rear. 500x500mm is larger than the…
These print well in PLA and ABS.
if you use a setup like mine you would have been upset when you look at your camera feed and you are missing a chunk of the bed then you need this the other parts seen in the pictures are…
In case you disliked the original stand as much as I did, let Ichigo stand on his Reishi as usual It is mounted with 2*3mm wood screws You can also parametrize it to your liking (tilt mainly) here: onshape
Tacoma centered Sprint Booster cubby plate Category: Automotive
A completely useless,or useful off centered potentiometer knob of projects, 3D printers, etc... If you like my work and want to give a helping hand to keep me going, I ask you please buy me some coffee or a energy drink :D…
Prints well in PLA and ABS.
Řešil jsem prodloužení okapového svodu a nechtěl jsem měnit, nebo přidávat trubku, jednalo se o pár centimetrů, ale voda už stříkala na zeď, toto prodloužení to vyřešilo, nahradil jsem plochý plastový kroužek, který tam byl. Využívám to…
Needed EarRack to install my MEI1000g2 in a 9.5" rack. This version center the emitor. For a sided version see : https://www.printables.com/fr/model/538816
Quick remix to center the wire mount. I haven't tested it yet. Category: 3D Printer Parts
I am using Hero Me hotend mount, so that the original left tower part doesn't fit my setting. I customized this tower part to put the cable mount pillar in the center. If you have same cable issue, just try to use mine central tower. You…
remix from https://www.thingiverse.com/thing:3052488 also print ring.stl and 2 spacer.stl from holspeed use m3x20 and nut to attach the bearing this is the best position to mount filadryer to direct driver extruder like E3D Hemera, you…
Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com Plan Your Build & Get Hardware ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you…
UPDATED 2026-10-27 — FULLER, MORE DYNAMIC STROKES Based on feedback from the previous physical print, the letter now has broader arch shoulders and droplet ends with smooth tapers into narrower stems. Designed stroke widths range from…
Three tubes, zero clutter. Open-top pen holders for the RJC Wall Organizer System — pens, markers, small tools, whatever lives on your desk and shouldn't. Printed and fit-tested in both orientations so you don't have to. Three square…
Xiaomi C400 Camera Mount for Prusa MK3S+ Custom-designed mount for the Xiaomi C400, positioning the camera centrally in front of the Prusa MK3S+. The arm attaches to four existing screw positions near the LCD, leaving enough clearance for…
This is a fix for uneven extrusion on the Prusa Minis X-axis, originally researched by Lajbror . My mount is based on the Remix made by Russell B , made originally because I had warping issues with his design. The final version by me…
just centered the holes for 2040 extrusions for the Daniel Payne model. Ender 3 NG Simplified Top Rear CoreXY/Motion
The factory bracket places the filament sensor too far to the right out of alignment causing additional filament drag. This bracket moves the sensor so it is centered to the spool. Use in combination with my spool holder sleeve for best…
Xena Chakram magnet that has a bottom meant to look like it cut into whatever its sticking to
Printed in PLA+ Print in place. I ended up just using the M3 screws from the runout sensor mount since i didn't need them anymore. This doesn't work unless you are moving your runout sensor.
I made this new motor mount based on the original one, but with modifications. It provides better weight distribution and perhaps more room. Only 3 of the 4 screws needed. Consider the weight of the motor while mounting ,but only if you…
I remixed the original model to center the lens, this is required if you want to use the chest mount (chesty)
Holds the runout sensor centered and a little lower so that it is an easy reach for a spool on either side. Print upside down. Might benefit from supports in the center bridged section.
Elevate your interior design with this stylish, 3D-printed mini planter , perfect for small succulents or cacti. Its contemporary, geometric design mimics the texture of cement, bringing an industrial-chic and minimalist aesthetic to any…
I used PETG (2 walls, 15% infill) but I'm sure almost anything will do! Thanks to Sten for the inspiration and foundation, great model!
Closed Power Brick Clamps in 120/45 and 80/30 with centered thread and connector mounts
This is a minimal 2.5" SSD adapter designed to fit inside a plastic 3.5" HDD tray. The model is extremely simple, prints fast, and does not require any screws. The SSD is positioned centered relative to the mounting holes. Unlike most…
This is a remix of Caoimhe's ENG Rear Z DIY Nozzle Brush Mount, reworked to hold a Bambu A1-style silicone wiper brush as a nozzle wiper. It uses 2 M3x6 screws and mounts to the rear Z axis arm. Fits snug to the bed if using the stock…
Mount for GoPro 11 Mini with TBS ND Filter bracket. Lens centered. Printed with Flexfill Filamentum 98A TPU Category: 3D Printing
I have printed another Filament Spool Holder, to have my two most used filaments at hand. The problem is that the filament sensor is positioned to the side. So I designed a centre bracket and swivels to have the sensor centred between the…
I had removed Raspberry Pi v3 camera autofocus mechanism https://forums.raspberrypi.com/viewtopic.php?p=2099545#p2099532 and need to superglue CStoC metallic adapter ring (with free space for connector dremeled away) onto v3 camera PCB so…
UPDATE 07/18/19: STEP files added for v7 model. UPDATE 06/12/19: Design has been updated to v7. v7 has a 10 degree up-tilt compared to v6 and reflects the angle from the original designs I remixed from. Updated in response to feedback…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hYssL5E5sIt Category: 3D Printing
Bike handlebar center-mounted cup holder 4 zip-ties needed
The original Lever file required the use of a very long M3 screw that I did not have, so I remixed the lever object to use a shorter screw from the Prusa Mni Spares bag.
Three spool pin sizes: 75, 90 and 105 mm for narrow, wide and super wide spools. Use M3x16 BHCS to screw the mount. Printing: No support required Material: ABS/ABS+/PETG 0.2mm layer 4 walls (2mm), 5 Top/bottom concentric layers (1mm)…
catapus (head centered) Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: No Supports: No Infill: 20% Filament: Elegoo pla Category: Toy & Game Accessories
I've modded the original model to make it smaller and to place the sensor right in the centre.
I wanted to add STUBBARP legs to a KALLAX shelf. The plate is 46x46 mm, 20 mm height. The corner holes are made for Power Pro #8 x 2-in Wood Screws. They're sunk by 5 mm. The mid hole is made for the M8 fitting that comes with STUBBARP. I…
