Counting matching models…
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
The design was inspired by a picture I once saw on the internet but I could not find it again. So I recreated it from scratch. When doing so, I had my CNC in mind and wanted to create it from wood (see last picture). But after some minor…
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
Print approx. €4.50–€5.50 excl. taxPreliminary estimate for PETGSource material: PET
Intro I've designed this case as a replacement for my current home server. The drive capacity has increased so much the last years, you need a lot less drives to get the same or more capacity. My current home server is already 10 years…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
This HDD / SSD Caddy Is fully funtional. It clicks in perfectly. It also shows the lights of the drive status. Compatibility It works on a HP Proliant DL360 G7 Server (Tested) but should also work on any HP Servers that use the same Caddy…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Toilet paper dispenser with a box for wet TP and a drawer for tampons or other toiletries. Improved version.
Print approx. €14.23–€17.39 excl. taxPreliminary estimate for one variant
2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…
Print approx. €9.32–€11.39 excl. taxPreliminary estimate for one variant
A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the plant too much water without drowning the plant. Thanks to the reservoir the plant will be able to get the water in when he needs…
Print approx. €9.31–€11.37 excl. taxPreliminary estimate for one variant
Introduction This is a good mechanical mount for the SG90 180 degree plastic micro servo. It is simple to assemble and print!! It can be useful for building your own robot or for some Arduino project!! I offer two model variants, one with…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
H0 1:87 Model Train Service Port “Lokliege”. You get a single 245mm width or five connectable sizes (100mm, 150mm, 200mm, 225mm, 240mm) to build the width you prefer. It will fit at least all H0 1:87 model trains but maybe usable for…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET
Hope brake calliper servicing tools consist of two bleeding blocks and a tool to release each individual piston one at a time for lubricating. The tools will suit Hope V4, E4 and RX4 callipers. Printing Information 0.2mm layer height…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Service stand for Mammotion Luba (1-3) robotic lawn mowers. Developed and tested with Mammotion Luba 2 AWD 5000. The stands are threaded to make it possible to change their height for some newer models such as the Luba 3. Recommended…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET
Epaisseur 5 mm Hauteur 7/8 cm Diamètre du trou 4 cm
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
This model is free. If you appreciate this model, please leave a download and a like! A simple ring for pan tilt sets from China. The ring supports the servo. This enables stacking multiple sets into a robot arm or lifting bigger sensors.…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
EDIT: Added 2 example pics with glass to demonstrate the hidden tank and the smaller tank auto-filling. I love my various ISO Stations and used similar plastic containers in college labs, but that was a long, long time ago.....and I have…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Print & acrylic draw
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
This is an adjustable cradle that will securely and safely hold a model locomotive or car for maintenance, painting or repair. The four cross braces can move up and down the base. Individual 45 or 90 degree braces slide up against the…
Print approx. €10.55–€12.89 excl. taxPreliminary estimate for one variant
Timeless parametric (many sizes) model of various étagères to choose from. A perfect addition to the nutcracker model (which is also nice and easy to print). - highly print-optimized. - each form ca be easily split in slicer to remove the…
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
I really do love this thing. Florida has a lot of flies. About 6 months after purchasing “it broke.” You know, as in, “no one knows who did it they just found it like that.” I've been keeping it attached with duct tape like a peasant. Now…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Lukisegler update (english): Servoplate for 9g Servos Servoplate for 9g servos (standard-mini-servos). Lukisegler update (deutsch): Servoplate für 9g Servos Servoplatte für 9g Servos (Standard-Mini-Servos).
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Of course there are countless VW logos out there but all are only STL files and thus not really adaptable. This is different. I traced the SVG files more or less by hand from bitmaps and they are clean so OpenSCAD can use them without a…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Siehe auch " Upgrade zu meinem Modell "Ventilkappe Schraderventil mit Werkzeug"/ Upgrade to my model “Schrader valve cap with tool ” Vor allem am Vorderreifen unseres Elektrorollers Mi 3 ist es sehr schwierig, die Ventilkappe zu…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Microserver Gen8 SSD stacker The optional 7MM stacker so that you can stack two SSD's on top of each other. For use with Microserver Gen8 SSD bracket for four SSD's. Has text “7mm drives” printed onto the print. Made with Rhinoceros 3D…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Calavera de cuervo. Abre y cierra la mandíbula. Se imprime en dos partes y se encajan, haciendo que la mandíbula se pueda mover. Necesita sujecciones. Añado el Gcode con el que yo lo imprimí.
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
If you like one side more than the other one, you can also print that preferred side twice. PLA works fine for all parts.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Dieser Serviettenring wird in zwei Teilen gedruckt und anschließend an der vorgesehene Vorrichtung zusammengedrückt. Für besseren halt kann man die teile mit ein tropfen Sekunden Kleber zusammenkleben.
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
If you like one side more than the other one, you can also print that preferred side twice. PLA works fine for all parts. The sides are compatible with my other napkin holders. The base plate only needs to be printed once and can then be…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
This is a lightweight servo mount for 5 gram servos. I designed it specifically to fit EMAX ES9052MD, but I can confirm it fits Flite Test PP A 5g servos just as well and probably most other 5g servos. Printing: 0.2mm layer height or…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Serving Taco Tray. 4 Tacos on one side, and 3 on the other side. print sideways without supports.
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for PETGSource material: PET
Always had issues with removing the perlators from the tap to clean them. In the past just used a wrench, but always damaged and scratched them. So I finally decided to design a tool for it and print it. Hope you find it usefull. Print…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
This is a simple housing to securely stand your micro-servos while testing. I currently have this holding my servos next to my breadboard while testing.
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
It is underground water reservoir for plants. I have been using a similar solution for years. But previously i have used hot glue with real funnel ;-) Now i have 3d printer so i have designed fast to print and cheap version, all in one.…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for PETGSource material: PET
Below I have provided the stl files and ready g-code files tailor-made for Prusa MK4! Print Settings: Nozzle: 0.4mm Layer Height: 0.2mm Infill: 60% Perimeters: 3 No brim or Raft Use Supports (Case.stl, Lid.stl, Knob.stl) Don't Use…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Kufic Script Serving Tray or Plate *Roughly translates to “Eat More Peaches” *No it does not. I have no idea what it says… so if you know how to read Arabic Kufic then please let me know if it is NOT COOL. For those interested this…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for one variant
The two sides of the holder can also be double-printed, so that both sides of the napkin holder feature pumpkins or spiderwebs. The model is not AI-generated. I only used AI to convert the outlines of the pumpkin into polygon coordinates,…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant
This sign can be used to comply with regulations when using CCTV in Denmark. Print is sliced with Prusaslicer with color change at layer 12. Can be mounted with M3 screws. This sign is made by the Customizable Warning Sign script by Stone…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
17 fillers from PrusaSlicer 17 výplní z PrusaSliceru
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for one variant
Made to replace the original to allow more lift of the car. You may need this Part for the panhard link: https://www.printables.com/model/1082050-trx-4-panhard-link-set-down
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Epaisseur 5 mm Hauteur 7/8 cm Diamètre du trou 4 cm
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Version 2 features a redesigned second side, allowing all parts to be printed in the same color. Apart from that, it is completely AI-free (the pumpkin in the first version was created with AI assistance, which is not permitted in…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for one variant
Arnold Jidáš Rimmer, BDP. SDP. Maaaaaaaaaaaaaaaagooooooorrrrrrr!!! :))
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
This is a simple vertical stand for holding an EKWB EK-Quantum Kinetic TBE D5 upright while using it on a workbench or table. It should work with any D5-based EK-Quantum Kinetic pump/reservoir without any issues. Also created a radiator…
Print approx. €6.76–€8.26 excl. taxPreliminary estimate for PETGSource material: PET
Use file servo-to-print. Web-cam-servo is for reference to see how to mount your servos. I can also share the pi case, but it's pretty basic.
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
🍂 Thanksgiving / Harvest Napkin Holder – Bring Cozy Autumn Vibes to Your Table! 🦃✨ This charming napkin holder adds a touch of fall magic to any table setting. Designed with care, it consists of two pieces that easily slot together ,…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET
Atakule is a 125 m (410 feet) high communications and observation tower located in the Çankaya district of central Ankara, Turkey, and is one of the primary landmarks of the city. As the district of Çankaya is itself on a hill, the tower…
Print approx. €3.79–€4.64 excl. taxPreliminary estimate for one variant
idéal pour les familles nombreuse qui ce batte la place sur le sèche serviette. les cotes sont ceux d'un modèle standard de sèche serviette. modèle renforcer en plus au cas ou vous avez des brutes dans la famille. je vous donne le g-code…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET
In jet models Festo ball-valves are often used to cut-off the fuel pipe to the turbine after landing or during the refuel prozess to prevent the turbine from flooding with kerosene. Some ppl prefer to cut-off the refuel pipe with a…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
Redukce na odsávačku hlenů Nosátko pro rušní vysavač Leifheit Regulus PowerVac. Odsávačka musí být určena pro vysavač, např: https://nosni-odsavacky.heureka.cz/nosatko-nosni-odsavacka/ Pro lepší těsnost jsem kontaktní plochy oblepil…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
This is a case for the Medtronic insulin pumps commonly used in DYI closed loop systems. My son is a type 1 diabetic and sometimes the insulin reservoir would come loose from the pump. The manufacturer makes clips for these pumps, but…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Ich habe das Werkzeug zum Lösen der Ventilkappe meines Modells " Ventilkappe Schraderventil mit Werkzeug " verbessert. Ich habe das Werkzeug etwas modifiziert, damit es besser greift. Außerdem habe ich einen 5mm-Sechskant für einen…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Problem ist, meine Brauchwasserwärmepumpe Bosch5000DW baugleich Buderus WPT200.4 AS ist Photovoltaik-Ready. Was immer das heist? Den wenn ich diesen Kontakt schließe erhöht sich nur die Soll-Temperatur auf einen Eingestellten wert.…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Why I made this as a gift for a professor after completing advanced control systems. Notice: Not affiliated with Quanser.
Print approx. €5.50–€6.73 excl. taxPreliminary estimate for one variant
Update 1: Swapped out fillets for chamfers in order to improve print quality. Based off of the packages that you find plastic utensils come in when you buy them in the store. This organizer can be used to store plastic utensils in an…
Print approx. €8.53–€10.43 excl. taxPreliminary estimate for one variant
Für die Befestigung des Servos werden 2 Klammern benötigt! Bitte im Slicer beachten
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
If you like one side more than the other one, you can also print that preferred side twice. PLA works fine for all parts. The sides are compatible with my other napkin holders. The base plate only needs to be printed once and can then be…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
This mount is based on the basic design shown in the Pololu Maestro 6-Channel Servo Controller Case by KikiTay . The servo controller needed to be mounted next to the actual servo on a (curtain) rod. The hooks were attached on both sides…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Vending Machine Power Switch Key This is a custom-designed power switch key for vending machines (drink, food, and coffee machines). I designed this model completely from scratch to provide a simple and durable replacement or spare key…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
3d model of a Kraft brand Macaroni microwave dinner bowl, and a 3d printable lid that snap fits to the bowl. Intended to support waste reuse.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Stand that holds up to nine (29 mm diameter) tubes of effervescent tablets. Models for 4, 6 and 9 tubes are included. A small testprint is included so you can check if the printer tolerances will allow for the tube to fit. The diameter of…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
About: Support base for box of water-soluble tablets (such as Effervescent). Those boxes are ideal as ESP32 cases with extra modules. When placed upside-down they tend to wobble, so I created a support base that you can use to stabilize…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Thin servo mount for a TowerPro SG-92R. It allows to mount a servo in a wing or a fuselarge of a model.
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for PETGSource material: PET
What you need besides the printed pieces: D8x3mm magnets Super attak glue Fairy lights (usb or battery) How to assemble the kit: Insert the roller in the pin and close it with the washer until it stops (fix with glue) Thread the beginning…
Print approx. €4.88–€5.96 excl. taxPreliminary estimate for one variant
The original hose reel handle is not very comfortable. I made several attempts and came up with this solution, which I'm sharing with you. Verve hose reel purchased at Castorama building market. Oryginalny uchwyt/rączka do zwijania węża…
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for PETGSource material: PET
Ich bin recht groß geraten - dafür ist der Bremshebel des Streetbooster two in einem unergonomischen Winkel angebracht. Ihn steiler zu stellen ist zwar nach Entfernung einer kleinen geschraubten Metallnase, welche in die Nut des…
Print approx. €1.70–€2.07 excl. taxPreliminary estimate for PETGSource material: PET
Power panel with C13 Plug, a toggle switch and 4 illuminated buttons Toggle switch: https://de.aliexpress.com/item/4000262590867.html?spm=a2g0o.order_list.order_list_main.301.76db5c5fKgg51I&gatewayAdapt=glo2deu Buttons:…
Print approx. €1.39–€1.69 excl. taxPreliminary estimate for PETGSource material: PET
🌌 THE OVERVIEW I incline myself to space There was no ghost on the moor No open window No monkey's paw I love Steven Wilson's music, and so I created a set of 3D printable abstractions to represent his discography. This can be used as a…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Documentation & Assembly Guide - Please Read! I've moved much of the documentation here. Many of your questions are answered here (or will be answered) as I fill it out. READ DOCUMENTATION HERE Status updates April 22, 2025 Rendered STL's…
This is printed 10 inch server rack designed for printer with plate 250 mm x 200 mm (Prusa MK3), but some parts (rails) need the bigger one (Prusa XL). Rack has standard sizes, see https://en.wikipedia.org/wiki/19-inch_rack Rails can be…
3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.
This design is made for you to use in your projects in Fusion 360. You have .STEP and .f3d files for both the SG90 and the arm, or both in .STEP and everything in .f3d. You have the real measurements of one so you can use it perfectly for…
3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.
Print with 50% infill - ensuring better durability. A replacement horn for the MG995 standard servo
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…
Update April 10th, 2026: FreeCAD 1.1.0 broke the model in several places. I believe I have fixed everything and have reuploaded as "generic__mount_v110.fcstd". Let me know if the model doesn't work for you! Update Sept 6th, 2025: I have…
Update 3/10/25: Added 2 new components, the side rail with integrated handle, and the side rail stacking connector. These allow for more customization as well the ability to add more rail sections. See details below. Update 3/8/25:…
I saw a bunch of 10in server racks when looking to get started with a HomeLab to tinker. Everything was built on an ender 3v2 so some parts have to print solo at an angle to accommodate the bed size. I used overture PLA The Lenovo…
1 to 1 scale of a MG90S servo. Could be convenient for projects to build in your servo!
Komori Planter | with reservoir A quiet evolution of the Kumiko planter. This is the new version of the Kumiko planter design, I wanted to explore a more understated form. With Komori Planter, I’ve moved away from the traditional footed…
This is replacement horn for the *SG90* servo The inner teeth should fit, there is also looser and tighter versions
Stencil dimensions: A6 (14.8 x 10.5 cm) Thickness: 1 mm Square dimensions: 2.8 x 2.8 cm Stencil fits perfectly to a 0.5 cm dot grid pages in bullet journal. Wave pattern on the top and zig zag pattern on the bottom of the stencil can be…
This is a round servo horn for a 55G Servo with 4 M3 holes.
Version 2 is here! Meet the Microlab —a super compact, fully 3D-printable homelab that’s perfect for self-hosted tinkerers who love big ideas but small footprints. At just 5 inches wide and a tiny 160x160mm base, it’s even smaller than a…
Here it is for all 1:400 model airport builders and fans alike printable, detailed, accurate 1:400 Ground Service Equipment! With some help from ConnerWS (not directly I remixed his stuff), I have scaled down and edited his series of…
I finished the project and will upload all the files and code as is. Servo Test (with end stop current detection) : Finished Project : https://www.youtube.com/watch?v=DbXVjOoNJw4 Materials needed : - 5 m3 x 5mm - Servo FT90R (continuous…
See https://www.amazon.com/MMOBIEL-Airplane-Helicopter-Compatible-Raspberry/dp/B09BZTRSDP/ref=sr_1_2_sspa
This is my version of Rode's Interview Go Handheld Adapter for their Wireless Go systems. Plug the Wireless Go receiver into my adapter and you have a handheld style microphone that looks great when supplying your own foam wind cover. I…
Jiji & Lily (Kiki's delivery service)
Robot servo motor gripper
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…
If you are like me buying cheap servo connectors without additional housing this might add feel of extra foolproof safety. Printing 0,15mm layer height, 32 pcs will take approx 3h
This is a 3D model of the MG996R servo. It's purpose is to help you design servo brackets and other parts that require a standard sized servo. * Just import this model into your 3D design software and now you have an accurate…
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…
Just added the smile like on the original design https://www.thingiverse.com/thing:1364024 :-) Fits perfectly Ultrasonic HC-SR04 sensor and standard servo mount Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
