114 models
[EN} Anatomically-correct model of an Esperanza bug. Legs were modeled thicker for printability. I recommend using brims to help legs adhesion to the print bed. .3mf file includes paint-on support to limit support on overhangs. If you're…
Print approx. €2.76–€3.38 excl. taxPreliminary estimate for one variant
I needed a model for an assignment. This Worked. I thought I would post it on here in case if anybody needed a cell model. I printed everything on 5% infill on an Ender 3 Max. The base and the main plant cell need support, but be careful…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
I found this Brave Vesperia Crest from itcamefromthecomputer , but I didn't like how every piece would fit together and the pieces couldn't be printed flat. I changed the design to be easier to print. Instead of having pins on the bottom…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Desperate Head of Man
Print approx. €18.19–€22.23 excl. taxPreliminary estimate for one variant
Gibt hier nicht viel zu sagen. Das sind die Zahnräder von der Tchibo Esperto Pro Brüheinheit. Drucker Bambu Lab X1C 0,2mm Layerhöhe 0,4mm Düse Material PETG Stützen “JA” Wenn ihr das gedruckt habt dann würde ich mich über eine Bewertung…
Signage for the Desperado Club from the book series Dungeon Crawler Carl. Color layers in the slicer at .2mm 0 - 13 (2.6mm) - White (I'd try black or a darker color, too many shadows on light color) 14 - 19 (3.8mm) - Red 20 - 37 (7.4mm) -…
I made this so that I don't need to break the trays that were included with the unit to be able to fit two filament spools inside. It's split in to thirds so i can be printed on a 220x200 bed. It should be printed with brim and support
These files are not to be sold without my permission. This will replace the existing post that holds the spring in the Adventure Force Desperado with a version that will have 10, 20 or 30mm of spring compression spacing. This works with…
A friend of mine asked me, to help him out and then I realized, that they changed some measures (or it is a slightly different version). So I made some changes in V4 (15.09.2024) Description My daughter got a pretty good lunchbox for…
No additional hardware is needed, it's a simple drop in replacement. Should print fine without supports!
Llavero inspirado en la serie de animación Digimon, con la posibilidad de imprimirlo completo o por partes para hacer cambios de color para esas impresoras 3D mas básicas. Keychain inspired by the Digimon animation series, with the…
This is a drop in modification (no shell cutting required) for the adventure force desperado to convert from a 6 shot cylinder to a chain at least 10 darts long, but probably much more (shown in the image are 30 and 21 darts…
Ecco a voi una versione spettrale e adorabile del nostro alieno blu preferito! 🦇💙 Questo modello raffigura Stitch in versione Vampiro , pronto a spaventare (ma non troppo) chiunque passi vicino alla vostra scrivania. Con le sue grandi ali…
Found the original by Nick Nissen and figured I'd rather print it in one piece as a bit of a test of my printer. I printed it in PETG as I suspect that's probably for the best since this is a device that will generate heat. I had to add…
1:4 and 1:1 Scale model of a hesperonychus along with some mammalian prey. The model features detailed scale and feather texturing along the model. The files are pretty large, they may take a while to load. The 1:1 scale model is split to…
Desperado Elite Cylinder with extra long and tight barrels for 1x elite sized dart or 1x short dart loaded with ramrod (highest fps) or 2x short darts (shotgun) You have to use at least a 10mm spring spacer for good fps results because…
1:12 scale model of a hesperonis. The model features detailed feather texturing. There are three different pose variations of the file. The .STL files are fairly big, they may take a while to load.
Not a lot of description for this one, it's a remix of the two and low-hardware; you'll need an ESPER PT, plunger orings, a face seal oring, a couple screws, and elastic. I don't expect many people to build it, but the step is included so…
1:35 Scale model of a hesperosaurus. At this scale, it measure 7.2" in length The model features detailed scale and skin texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a…
3d scan of Our Lady of the Sweet Waiting, virgen de la dulce espera. supports required
The top cover broke so i made an replacement, take measurements and the original seal will work too. It could also work with other identical "Finessa" coffee machines (MioStar, Koenig, Turmix, Tchibo Esperto Caffe etc.). It can be printed…
DEU Hi hier eine Druckdatei für die Bohnenlagerung der Tchibo Esperto. Model 1: Fangbehälter Model 2: Deckel ohne Dichtung Model 3: Deckel mit Dichtung Hinweis: Bitte drucken nur mit Lebensmittel echten Filamenten. ENG Hi, here is a print…
These Hare Tech Vesper Blaster Muzzle Replacements are simple orange barrel tips for the Vesper Brushless Flywheeler Primary. Featuring similar knurling to the original, this accessory allows for custom brighter colors or larger muzzles…
Customizable panels to replace the “fan” shaped greeble on the Desperado nerf revolver! I have included a “blank” panel for customizing, as well as STEP files. Please post Remixes and Makes, I'd love to see them! Print the plates flat on…
Super lightweight Esper filled with holes all over the place. The trigger is not the same as the picture. There is a shim piece included for the grip area and I stacked e-tape layers to make it not flex when priming. Other parts not…
This small but extremely useful tweak to Machineboyzach's excellent spindle design extends the stabilization pin's hole by 5 mm to allow reuse of the stock metal pin. Printing on my Ender 3 V2 with Inland ToughPLA required XY hole…
Bushing for Desperado foosball table Print Settings Printer: Flyingbear Ghost 5 Rafts: Doesn't Matter **Supports:** Doesn't Matter Resolution: 0.2 **Infill:** 20% Filament: anything PLA Category: Sport & Outdoors
The excellent extension by Nick, but with a hole for a 41mm hygrometer. One segment only, pls refer to the original.
1:1 scale replica hesperonis skull model. Sculpted the model in Zbrush and scaled the file in Blender. The 1:1 files measure 10" in length. I recommend printing at low layer height or on a resin printer.
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Add an adjustable spring spacer to the Adventure Force Desperado. Adjustment range is ~5mm to 30mm. Minor shell modifications are required to use this. A 16mm hole needs to be made on the back of the blaster. The assembly of this spacer…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
DEU Hi, hier das Model eines Ersatzdeckels mit Dichtung für die Tchibo Esperto Kaffeemaschine. ENG Hi, here is the model of a replacement lid with seal for the Tchibo Esperto coffee machine.
motorcycle grips for motorcycle suzuki desperado VZ400 and VZ800, quite comfortable, deliberately made them a little thicker than the original ones. Printed by ABS plastic Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
The MKD003 is a bit smaller than the MKD002 so I changed the dimensions. Also, I had some trouble printing the connector part with a bigger nozzle (0.8 mm), so I made that a separate part I printed with a 0.4 mm nozzle. The 55mm version…
The Vesper Trigger Short Stroke is a drop-in mod part for the Hare Tech Vesper Brushless Flywheel Blaster that reduces the pre-travel of the trigger before it engages with the firing switch. This allows for a snappier, more responsive…
Marine bird from cretaceous North America.
Are you tired of the pain of the drudgery of the boring grip? Are you waiting for your lucky day? Well hello lucky nerfers! It's me, your average human and creator specializing and excelling mightily in designing and printing of many…
This quick small mod fits over your existing HC Vesper trigger geometry to make take up any existing empty space between the trigger face and the switch. Friction fits in but you certainly can glue it if you like. Just pop the rear pin…
This is the full amalgamation of all of my HC Vesper parts for all your P90 needs. The stock uses two 94180A333 heat inserts along with 2x 15mm M3 screws, and the locking key piece may need to be reprinted a couple times or so with…
If you don't like the stock buttons with shapes, you can print your own! The file contains A, B, X and Y buttons, but you can make your own! Remixes are welcome. How to replace: remove the batteries and power off the controller (only…
The Vesper Expanded Battery Door is a 3D-printed alternative to the stock battery door included with the Hare Tech Vesper Brushless Flywheel Blaster. Featuring a sleek faux-cheek-rest styling buttplate, this battery cover accommodates…
Vesperon is a small yet fierce bat-like creature from the shadowy corners of forgotten forests. With large wings designed for silent flight, its sleek, dark body allows it to blend seamlessly into the night. Its sharp fangs and eerie,…
Vesper Vault brings the architecture of a ruined Gothic chapel to your desk. Three staggered open compartments provide space for pens, brushes and small desk items. A tall rose-window wall, pointed arches and a front gargoyle relief…
An alternative endcap for the CESPER parts so I don't have to change the E-pull. Remix of https://www.thingiverse.com/thing:4576565 Print instructions Print Settings Printer Brand: Prusa Printer: I3 MK3S </div> Supports: No Resolution:…
En este modelo 3D, recreamos una escena icónica del episodio de Bob Esponja en el que nuestros personajes visitan un cementerio. Pero hay un giro: en lugar de tumbas tradicionales, encontramos las “esperanzas y sueños” de Calamardo: ¿Qué…
10/1/19: Added the Plunger Internal, rambase through, and shell_brass_back files. These are a strange set that allows the barrel to nest mostly within the plunger tube, and replace the normal rambase, plunger, and shell/barrel. The shell…
Takway Vesperbox / Lunchbox / Spare part / Ersatzteil Verschluss / Closure
This is a printed follower that'll hopefully allow for dart sensing for the HC Vesper. I just took an image from the listing off of M416 Gel Blasters and based the magnet position off that and copied a follower from a Diana magazine. It…
Lower version,, used to create clearance between existing trays, i use it for dehydrating mushrooms. (esperanza)
Update: 2026-09-27 Added a v2 with a better fit that doesn't jam darts as easily. Print with PETG or PLA tough, or it may snap when installing. To install, remove the base plate and clip in the extender from the side.
Señal con medidas indicadas para tu despertador de lego.
Hardware free extension for your HC extended magazines! Locking pin fits into the slot and locks in with a piece of filament after slotting in your magazine. Print upright with supports for the top lip areas, shouldn't need a whole lot of…
con este modelo puedes sustituir cualquier pieza si es necesario , combinar colores , he incluso es mas facil de transportar soporte necesario 50 % de relleno o mas unos 100 gramos todo el kit boquilla de 0.4
Designed this as a friend was missing a piece from their “Desperate Oasis” board game, and I couldn't find replacement pieces online, so I decided to upload it here in case anyone runs into the same problems.
It's a stock. It holds a battery. For your Vesper. Your HC Vesper. Its a HC Vesper Stock. The HC Vesper Battery Stock. Mmmmm, Baetrie. Needs a couple M3x15 screws, some washers, and a couple brass inserts, 94180A333. Print with supports,…
Stegosaur from the Jurassic Morrison Formation.
With this stock, it won't 100% collapse; it would friction-fit at around 90% collapsed, thus the top button won't be needed. To print with minimum support, print with this orientation: The trade-off is that the buttplate finish would be…
letra grande em branco nome em rosa colados com fita dupla face
Material: PLA/PETG/ABS You can print the model by changing the filament during printing (adjustable in the slicer) or print the model in one color and paint it. Layer height: 0.1-0.2mm Nozzle: 0.4mm Speed: 60mm/s Infill: 100% Print time:…
The official BCAR barrel doesn't work well with used darts, so I made this. If you have GFZ BCAR already, you may skip this, because that's probably a superior option. This is simply a narrow bore barrel (around 14mm after shrinking) that…
Had-ještěr-drak a klon netopýra (Vespertiliosaurus) / 2 verze Vlastnos Vespertiliosaurus je že se chová pří obraně jako ještěrka. Autotomie ocasu: V případě nebezpečí nebo napadení dravcem dokáže ještěrka úmyslně odlomit část svého ocasu,…
Spritzschutz für den Kaffee-Vollautomaten „Esperto2 Caffé“ von Tchibo. Kann einfach von oben über den Auslass geschoben werden. Fängt bei einer Tasse zuverlässig alle Spritzer ab, bei zwei Tassen nebeneinander immer noch mehr als die…
The Esperanto Jubilee Symbol represents international Esperanto culture. For Esperanto Day, I made green star and Jubilee cookies. It may be prudent to cut your cookies through plastic wrap, because most people don't have food-safe 3D…
This cylinder replaces that dusty old 6 shot full length 50. cal cylinder with a 10 shot cylinder firing Mattel Boomco darts! Performance is around stock, but with my AF Desperado Full Upgrade Kit (found on Etsy.. for now..), this…
A remix of the Shrub desperado side plates featuring the Rainy Research logo. STLs and STEPs Included.
Este pequeño proyecto solo puedo decir que me ha sido muy útil. Tenia por casa un viejo iPhone 5s sin uso, y necesitaba un despertador para mi mesita, las funciones del ultimo iPhone en modo horizontal no terminaban de convencerme.…
Clip in from the right-hand side.
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
--==== UPDATE 12.03 ===--- I update the model a bit (I added some ‘decorations’ ;)) next update I'll upload the prints photos. Dolce Gusto capsule holder. Bottom and top part are the main once, the middle part can be printed as many as is…
Panoz Esperante GTLM as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Replace your stock HC Vesper grip with something a little more "organic." Very human design. Reuses your stock grip screw, print the grip with the trailing end on the bed, and just glue in the fake screws to your taste. Overhangs…
topper para torta personalizado (Esperando a...)
This is a hardware-less addition for your flip up sight. This makes it so no accidental button presses actuate and release your flip up HUD screen. No flip = no mid-game distraction. Definitely not for the average HUD Pet Enjoyers. Pips…
BEHOLD! A HAND HOLD TO BE HELD! Specifically designed for the HC Vesper's flip-up sight, but you can use it without the HUD if you want to. Uses 4x 94459A767 McMaster-Carr heat inserts and 4x M3x10mm screws. The sight piece is a little…
vela-esperanza-dinero-paz
Gridfinity container for a digital precision scale
The OOD MOLLE Magazine Holder (Diana + Vesper) is a single-magazine carrier for MOLLE-compatible belts, vests and plate carriers. Featuring four POM ball detents, this mag holder grips your magazine securely while reducing wear on the mag…
Meet Vesper, the stitched-wing phantom drifting through the twilight forest 🌲🌫 With her curled antennae, sinister stitched smile and mismatched button eye, Vesper may look delicate — but her presence tells another story. The embroidered…
Recently I bought an Esperanza EKD002 food dehydrator to convert to a filament dryer. The models I found worked great for the standard 1kg spools, but not for the larger 2.3kg spools in my collection. To accommodate those I made this…
Print settings etc: Printer: Bambu Lab A1 Filament: 3D Fuel PCTG Filament Profile: 3D Fuel's PCTG Profile for A1 Infill: Increase wall loops until 100% ___________________________________________________________________________ This is a…
The hinge of the lunchbox broke and I wanted to save to 500g of plastics from the landfill. The lunchbox is from the brand "MyVesperbox" and the model called "Len". If you have the broken parts try weld them with aceton (see assembly…
Enter a dark fantasy world with this collection of highly detailed character busts, created for 3D printing, painting, and display. The collection features an expanding cast of fantasy and horror-inspired figures, including vampires,…
This press-fit adapter makes AIT magazines work with the Hare Tech Vesper. It requires trimming the magazine release by 2.5-3mm to align the dart properly. FEATURES: • Vesper AIT Magazine Adapter Shim • Designed by Luke • Press-fit parts…
The BEKO Cafe Esperto CEG7404C bean-to-cup coffee machine accepts ground coffee (decaf etc.) though a bypass hole on the top. This hole is a bit small, and I found myself making a mess. So I designed this funnel with replaced the OEM…
I needed to make a fixed tripod mounted to the desk, but I wanted to use the original head from a regular tripod. I searched for a tripod end piece and even found one, modified it so it could be glued to a wooden block, but the printed…
Logo of Tokyo Esperion FC from Ao Ashi manga/anime
Auf meiner Arbeit brauchen wir solche Schilder um zu kennzeichnen wie der stand von teilen sind die reklamiert wurden.
This is a joystick for aftermarket(Esperanza) controllers. I am not sure yet if this works in an original PS3 controller. I printed this with normal supports, it is quite hard to get off the supports, but its manageble. The upgraded one…
Es ist am besten mit HT PLA zu drucken, dann kann die auch mal in die Spülmaschine. Scharnierstift habe ich zwei passende kurze Nägel eingeschmolzen.
This decorative coffee cup sleeve is a wide band that wraps around a disposable takeaway cup. It features a torn-paper, ragged edge and bold raised lettering reading "Being an adult is just Googling things with increasing desperation,"…
Material sollte halbwegs lebensmittel echt sein zumindest fürs Brot
I created a foot pad to fit at the end of the leg of my HESPERIDE MODULA chairs, because this chair is design for outdoor use, and the original pads are not properly resting horizontally and they are damaging my inside flooring. Therefore…
Meet Shakespere Shakespere is a small robot with one very big dream: to become the greatest writer who ever lived. He was built on a workbench from spare parts, and the first thing he ever saw (through his one camera eye) was a battered…
Takway Vesperbox / Lunchbox / Spare part / Ersatzteil Verschluss / Closure
This is a drop in modification (no shell cutting required) for the adventure force desperado to convert from a 6 shot cylinder to a chain at least 10 darts long, but probably much more (shown in the image are 30 and 21 darts…
No additional hardware is needed, it's a simple drop in replacement. Supports shouldn't be required either if you have good overhangs. .step file includes both variations including one that wasn't cut for half darts and has no fillets or…
This is a printed follower that'll hopefully allow for dart sensing for the HC Vesper. I just took an image from the listing off of M416 Gel Blasters and based the magnet position off that and copied a follower from a Diana magazine. It…
It's a stock. It holds a battery. For your Vesper. Your HC Vesper. Its a HC Vesper Stock. The HC Vesper Battery Stock. Mmmmm, Baetrie. Needs a couple M3x15 screws, some washers, and a couple brass inserts, 94180A333. Print with supports,…
