1,589 models
Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
Print approx. €6.77–€8.27 excl. taxPreliminary estimate for one variant
This little clip, that holds the filter part inside during cleaning out coffee, broke after years of use. It really does its job. A bit support needed for the little axis part. Print instructions Support needed. Printed with PLA. Infill…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Box ist gedruckt in PETG, PLA ist zwecks Thermischer Beständigkeit nicht zu empfehlen. Deckel ist gedruckt in TPU 52D, weicheres TPU ist nicht zu empfehlen. ------------------------- Box is printed in PETG, PLA is not recommended due to…
Print approx. €3.34–€4.09 excl. taxPreliminary estimate for PETGSource material: PET
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
This thing was crowd designed by the members of the Espresso Aficianados Discord . If this design or espresso interests you, hop in and say hello! The Tool A nine pronged WDT tool. This was designed for 0.4x75mm 0.35x75mm acupuncture…
Small Nespresso capsule holder. Two variants - for 24 pcs (only Part 1) or for 48 pcs (Part 1 and 2). You can remove the cover and fill the capsules into the holder body. Print instructions Printed with Prusament PLA, without supports.
Update 7/5/2025 I really appreciate all the support and attention you've all given to my work. I wanted to make something that would be useful for a lot of people, and the response has been far greater than I ever expected. That said,…
This is a capsule holder I designed to be glued to a the side of a Nespresso coffe maker. It holds 3x5 capsules. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Notes: No supports required, print on flat side.…
i have included both stl and 3mf files for this. its 55mm height. no ams is needed cause you can print the coffee separately. printed both parts at 0,28 layer height. Archimedean chords for top layers for the coffee. slow first layer.…
I got a first-gen Nespresso machine eons back and immediately printed out some dispensers for the pods. In fact, these were some of my earlierst prints and the first functional prints allowed in the public spaces of the house. So when I…
I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
My version of a nespresso capsule dispenser. If you need it , print it ! :-) Happy printing. Printing advise: None realy. I used PLA, 15% infill and no supports. For the loop use a brim.
10/26/2022. Updated to include single piece double holder at the request of a user. The new added stl is 293mm long and is not for every printer. After getting a Nespresso coffee maker I found tons of great pod holders for the original…
Nespresso dispenser Print instructions PLA 15% infill
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
Please report a portafilter or other equipment that is not fitting, plus its dimensions. The tamper station features: holding the portafilter for preparing the puck (adjustable via vertical screw) storing two bigger 51-54 mm or 58 mm…
This modernly designed Nespresso capsule holder is simply too good to not want to have at home. It holds a maximum of 21 capsules, stands securely without taking up too much space, and is quick and easy to print (no supports required).…
Nespresso changed their packaging on the virtuoline capsules without warning and made the old capsule holders worthless (the ones that hold the cardboard inserts) so I offer this version that works like the Classicline holders that you…
I wanted to design a stylish capsule holder for my Nespresso machine and came up with this idea. Started to sketch in Fusion 360. Later, i searched thingiverse, if something similar exists already and found this:…
Nespresso Vertuo Capsule Drawers! Inspired heavily by the two models mentioned below, I married their concepts into one amazing Nespresso Capsule dispenser. The pictured product features 4 drawers, but you can print as many or as few as…
A nine pronged WDT tool that's printable in a business card size. This was designed for 0.35x75mm acupuncture needles with a 30mm handle. I used https://www.aliexpress.com/item/1005001467649993.html . Dull the tips of the needles on an…
For all the nespresso coffee capsules users Print Settings Supports: Yes Resolution: 0.2mm Infill: 15% Filament: Fillamentum Pla Extrafill Category: Kitchen & Dining
Update (16 Dec 2025): THØNK 2 is here! Improved in every way after two years of daily use and listening to community feedback after hundreds of prints. Now featuring a no glue, snap-in TPU knockpad. Find the THØNK 2 here! Form, function,…
A knock box for discarding your used espresso pucks. I have been using for a over a year and it seems indestructible. Print the two parts and use some super glue to hold them together. Depending on your printer they might fit tight or…
I remixed deLamorDesign's espresso knock box to change the dowel diameter from 0.75 inches to 20mm, and increased the box diameter from 100mm to 120mm. When slicing this I added a modifier region to set the infill percentage to 50% near…
Simple tamping station for Breville Barista Touch 54mm portafilter. Might work for other 54mm portafilters, but did not take different heights into account. Includes storage space for funnel and tamper. No supports or special print…
Kitchen set part 3 : Coffee capsule Dispenser (Pisa Tower) Make your your coffee tastes more Italia Compatible with all diam. 37mm capsules (Nespresso, Doce Gusto,...) 3 dispensers holes Fill the capsule tower from above Print as many…
Features No support Minimal filament 5g (54mm) 7g (58mm) Compatibility 54mm (untested) 58mm/58.5mm (tested on Decent Espresso and VST Precision Filter Baskets) Print Settings PrusaSlicer 0.15mm quality with 0.4mm nozzle
Print just the tower part if you want, or if you want rotation, print the two turntable parts also. It uses a 608 bearing. The towers on the original one felt a little flimsy so I added some more structure between them that should fix the…
.2mm layer height; .4mm nozzle; PLA 4 or more perimeters and infill whatever you want.
Printed with tamper side to the build plate with supports.
A simple tool for mess-free grinding, dosing and even distribution of coffee grounds in espresso baskets before tamping. The tool consists of two rings that are screwed together with a variable number and sizes of spacers between them to…
Turnable Nespresso Tower in two versions: Standard Version to store 42 capsules Extended Version to store 60 capsules Optional Covers There are a few different covers you can choose: blank cover with text: Coffee Time with coffee cup 3…
I present the spring loaded Coffee/Espresso tamper gadget: easily compact your coffee grind with your own assembled tamper apparatus to make your espresso with style! Available for 49 - 58 mm portafilters. The handle, spring holder and…
Remixed model of the Nespresso Capsule Holder from @mibla_44019 Removed the physical supports that were there in the original model since they were not useful and every 3d printers are capable to do the small bridges. I hope it'll be…
Get inspired by Crema Coffee Steam Lever but don't want to spend $40 and take apart my new Breville Barista Pro espresso machine. I designed the snap on the lever which no tool is required for installation. Due to its snap-on design, I…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the Handle and Spin Ring parts without the countersink. This allows the use of non-flathead/countersunk screws. enable support for the handle…
Doll House 50 bar Espresso Maker / Coffee Machine. 50 bar? why not. g-code not necessarily to scale. Please resize to your scale.
This is a basket for the Nespresso pods. currently not printed the model but should be able to fit a good amount into it and you can scale down or up depending on your printer size. Size: 222x222x150
Nespresso Capsule Holder - remodeled
Update 12/18/23: I have found that using a square of shelf gripper, liner, foam under the cutter prevents the base from rotating. See third photo. Press firmly on the spindle with one hand while rotating the blades with the other. Cut two…
A fun project I spent a lot of time tuning. I'm a metal worker so this was a challenge for me to design the smooth shapes. The Design Goals: An offset knock bar Professional look Low overall price Printable After many revisions this is my…
You can mount this print under a cabinet with double sided tape or mount it vertically against your wall. When its mounted just slide your capsules onto the “railes” Print Settings Material: Pla Layer height: 0.30mm Supports: No Print…
Background Inspired by Arabic Girih patterns and sawblades this tool is both good looking and efficient. The grip is an eight-pointed star this makes it easy to grip and twist. Design notes The diameter for all these models are 58mm, this…
I got a new Nespresso machine (Vertuo) for my birthday. I have decided to rint my own dispenser for the pods. I wanted something useful and easy to print. The model comes with 2 parts: Bottom and Cover. Those parts can be fit on a Prusa…
Nespresso Vertuo Pod holder/rails. They are keyed to connect together. Can be mounted vertically or horizontally. The image shown is horizontally mounted on the underside of a wall cabinet - hidden from view. Pods are easily slid in and…
This model was inspired by this design , but slightly more compact and with more options for numbers of columns. I also added some horizontal supports to make sure sure that the holder doesn't bend since the clearances are pretty tight…
Snug fit for Delonghi and other 51mm portafilters. .2mm layer height, extra perimeters. Food safe at your own risk.
Nespresso Vertuo pack holder. Prints in two sections which can be glued together and should hold an entire package of Nespresso Vertuo pods.
Wanted a better spot to put our coffeecups. 6 holes for screws. Size: 230mm x 169mm holds 24 cups. Made my wife actually happy, it might be the reason she allowed me to buy the Prusa XL. Printed mine in PETG with brim.
A quite minimalistic holder for Nespresso capsules. Holds 5x4 capsules. Print instructions Prints without supports as is.
Please print with food safe filament like PETG. Matching neodym magnets: Shape: disc Diameter (D) 5mm Height (H) 5mm Tolerances +/-0.1 mm May not fit to all VST-Baskets. Please check the outer diameter, should less or near 70mm. (see…
WDT espresso tool with magnetic stand. 3x2mm magnet for stand
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Printed on the BambuLab P1P with extrudr PLA NX2 black I used a standard profile with a layer height of 0,16 mm with an 0,4 nozzle and 15% infill. On the photo you can see that I forgot to add support elements at the bottom of the…
Stand or holder for your puck screens generally sized for 58mm portafilters. This was sized specifically for the Flair58 puck screens although may work for other puck screens of similar size. Flair58 pucks screens measure at 58.4mm dia…
Printing Any material should be fine --it's not designed to hold food items or be subjected to heat/pressure. I used PETG, but that was to match the filament I used for the tamping stand and portafilter dosing funnel, which are subjected…
My remix of http://www.thingiverse.com/thing:341809 Don't forget to like the original if you like this one! :) Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator (5th Generation) Rafts: Yes Supports: No Resolution: 0.20…
TL;DR : Recycle your Nespresso capsules. Easily, safely, hassle and mess free. Quick guide on how to use it: https://www.youtube.com/watch?v=yUxY0kESfBE (The unit featured is a prototype. Uploaded version have size adjusted propelly).…
This new bigger model is designed for new nespresso capsules. There are 3 sizes. This was designed for EU market (Czech) - maybe there are other sizes.
Remixed from another model on Thingiverse, I made a number of small changes to improve on the design. This model still uses the original top part for the drip tray. In the previous design, drips would be trapped in between the tray cover…
Description Transform your coffee corner with this innovative Expandable 3D-Printed Nespresso Capsule Holder , designed to grow with your love for Nespresso flavors. Crafted with functionality and elegance in mind, this modular storage…
This is a capsule holder for the Nespresso Vertuo capsules. The assembly is made using an M8 bolt and nut as well as a 608 bearing and 8 4x1.5 magnets. I paused the print to place the M8 nut and magnets as shown in the last couple of…
A Nespresso capsule organizer which can be attached to a wall or ceiling surface. This is a small variation from an existing model. I wanted to have an indentation to place a two side tape to make it “Invisible” This is a remix of…
Overview Inspired by the Weber Workshops blind shaker , I have created a 3D-printable version for those of us who want to experiment with a different distribution method! This tool is intended to help homogenize grounds via agitation.…
The fourth thing in my Week of Things, some useful, some just for fun. Thought this would force me to post some of my projects. Most are semi useful/functional and some are purely inspirational. After getting a Gaggia Classic espresso…
Espresso tamper - what else to say? Of course it is not as fancy as steel one but you can't print steel, right? According to my tests this works just as well and you can cheapy and easily test different tamper styles - flat/ripple/curved…
This tamper guide makes your ground coffee flat, so earth can stay round! It is a really tight fit on the tamper, so no screws needed. Print it on PLA or PETG. No support needed! (The inside of the model ends in a cone, so you can print…
I corrected the mirrored logo on the right side. The logo insert is in a separate file now. I made versions for 2, 3 and 4 tubes. Many thanks to Luis for that great model! 👍
Capsule holder remixed from this one without most of the back side, so it shows more of the machine color and uses way less material. Can be glued directly or using properly shaped double sided tape. Thanks Peter for the original design…
Capsule holder for nespresso vertuo. It only has 1 side open, holds up to 6 capsules, but you can scale the length to get more or less capsules and make it fit for your needs. mine fits perfectly under an ikea wall cabinet.
If you are looking for a Nespresso Vertuo Pod Holder that lets you store and sort your pods in a stylish and convenient way, you might like this model. It is designed to fit all sizes of pods, unlike many other holders that only work for…
Requires to be printed diagonally on a large format printer (300mm x 300mm).
Bought the Nespresso Vertou Pop and found that a normal coffee mug could not fit under the dispenser. This platform raises the coffee maker to accomodate normal mugs. Remove the cup drip tray for iced coffee drinks. I used 5mm rubber feet…
Big hunkin' coffee espresso machine scaled for dollhouse by Lidl PlayLive. It has some place on top to store coffee cups. You can pick model with or without handle for easier print or more accurate representation. I recommend to print…
This is a remix, but it's been 2 months and I'm now unable to locate the source of the file I downloaded. Apologies to the OC. I'll update the post if I track it down. These holders are big. I can't print larger than the Triple on my…
I have created it because the other dispensers were consuming a lot of material, and they didn't work for all types of capsules. I had to make several models to get it right. .You can print multiple dispensers and join them with the…
This is the perfect coffee / espresso tamper in 4 different sizes: 57mm (Ascaso), 57,35mm (Lelit), 58mm (most of the other brands with 58mm grouphead) and 58,55mm (Lelit). I'm using the 57mm version with my Lelit PL41TEM and the Ascaso…
This is an alteration of pumikachu's Nespresso capsule wall holder light to support magnetic attachment. I also did an adjustment to the bottom part for ease capsule release. Designed to use neodymium magnets with 6mm diameter and 1.5mm…
Altered an already good design to make it modular using dovetail joints. Each dispenser comes as a pair. There are two different sizes to address varying carton dimensions - 61mm x 60mm and 61mm x 65mm (No idea why Nespresso they did…
https://www.buymeacoffee.com/articpanda Just a 2 Inch riser to for the Nespresso Vertuo Pop+ (not an ad). My wife bought this and my cups didn't fit under it so I just made a riser! Printer upside down as Cura image shows Feel free to…
Two file build, with the grate simply sliding into the tray, no intense assembly required! Remember that coffee is hot, so please consider which filament you are using for the print. ASA/ABS or PETG should hold up better for this…
This is a multiremix of: https://www.thingiverse.com/thing:4777591 https://www.thingiverse.com/thing:2813393 https://www.thingiverse.com/thing:3090239 https://www.thingiverse.com/thing:593717 A full combo for wall decoration Nespresso…
This drawer fits underneath a Nespresso Inissia machine, specifically the one made by DeLonghi (once upon a time sold at Costco). It may also fit under the other Nespresso Inissia (such as the ones made by Breville or Krups) machines, but…
A nice, simple but elegant espresso cup with a suitable saucer. Disclaimer: Food and 3d printing is a topic of itself. At least you have to: Use a filament that is food safe and that has a glass temperature above 90-100 degree Use a…
This dispenser works with Originaline packaging. Just tear off the flap, insert the box into the top and when you turn it back over the pods will cascade into the tray. Edit 6/12/19: Small improvement to help keep box from going too far…
Grinder of the coffee machine Breville BES860 does not work due to wear of a gear inside gearbox. So I made a new gear to replace the worn one. If possible, it is good to increase the density. But consider printing time. A pin with a…
This is a tamping station for Rocket Espresso 58mm (E61) portafilters. It allows you to tamp with one hand with single-, double- or bottomless portafilter. I printed it in PETG and fuzzy skin which gives it a cool look. I designed it with…
A Remix of the popular Nespresso Dispenser from Luis only takes 2 Nespresso boxes instead of 4.
For those who either have less kitchen space, or less taste in coffee…
Der Nespresso Kapselhalter ist gemacht für das Prusa Wooden PLA Filament. Nur mit diesem habe ich eine gute Qualität hinbekommen. Für den Druck beider Teile habe ich die MMU 3 ausgeschaltet und den Extruder direkt gefüttert. Beide…
Small amount of material needed (it's very cheap) Therefore fast printing time (you can make a lot of them) 2 parts to be combined with dovetail (for perfect alignment) Optimized capsule movement through elevated sliding rail (bulge on…
Holds 20 capsules. Brim required for stability Print instructions 15% fill Update: New version available here https://www.printables.com/model/129039-nespresso-capsule-holder-version-2
This funnel has an outer lip and uses 16 magnets (4mm diameter, 2mm height) to hold onto the portafilter basket. It prints upside down without supports. Should fit most 58mm baskets. The bottom lip has a 70.2mm clearance, with a 58mm…
