Counting matching models…
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Print approx. €3.42–€4.19 excl. taxPreliminary estimate for one variant
Ein einfacher, aber nützlicher Halter für Tablets und Smartphones. Die Konstruktion wurde so gewählt, dass keine Stützen notwendig sind.
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant
Hier das Model zur praktischen Lagerung der einzelnen Karten. Die Karten findet ihr unter Wewölfe vom Düsterwald hier bei Printables. Gedruckt mit Prusa PETG in der Druckeinstellung schnell, alles Standardeinstellungen
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for PETGSource material: PET
it stops a door (:
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
I bought some small magnets (ø 10 mm, 2 mm height) to secure my airbrush stencils but found that these are so small that my fat fingers can't lift them up with ease. So I made these holders for them and now they are very usable. The…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
zusätzlicher Magnethalter für ein RaspberryPi 4 gehäuse
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Update 2025-02-17 Added Breech - Lifter Nut v2.stl , Breech - Lifter Bolt v2.stl , and Breech - Lifter Pin [x2].stl These replace the old Breech lifter parts, should fix issues with the nubs shearing. Insert the pins into the lifter parts…
It's the big bolt from the Lethal Company game. I've been playing so much and I wanted to make some stuff from the game. Visit my site to support my work or just look around: https://www.shellingtonlabs.com If you don't have a printer or…
EMPLOYEE BALLIN' FREE MODEL Models height ~ 5.1 cm Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) Please share your makes! I would love to see them! 3D…
Model height ~ 4.6 cm Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) 3D PRINTING SETTINGS Layer Height: 0.1 - 0.2mm Wall Thickness: 0.8 - 1.2mm Infill…
Holl das Papier und da draufsteht du zeichnen danach anmalen
Prints without supports (although you will probably want to scale it up ~200% for an easier time printing). You might want to add a few negative volumes near the tip of the hands/teeth if the slicer decides that the part of the tip should…
Pro-flashlight from the Lethal Company. It's really just a regular flashlight with the lethal company skin over it. Functions as an ok actual flashlight, would not recommend going to Titan with this. The backyard is fine. Assembly…
This traps a mouse inside and locks them in. Assembly It's pretty straight forward. First, put the lever platform inside of the main box. The thick end should be towards the opening. You will have to bend the side walls of the box…
Kitchen Aid Artisan Halterung für Knethaken, Schneebesen etc. Infill 42% Befestigung: 4x35 Panhead Schrauben Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I would be happy about a Like
I am looking to grow my new channels! Give me a follow on youtube and mastadon and please feel free to say hello :) https://www.youtube.com/@homegrown3dprint https://mastodon.social/@homegrown3d Changelog: 3/14/22 refined eye cover area a…
Update vom 12.04.2023: Neue, kürzere Endkappen für DC-Hohlstecker-Einbaubuchsen, 90° versetzt ( https://www.amazon.de/gp/product/B093FTFZ8Q/ ) für alle Versionen Update vom 13.03.2023: Neue Endkappen für DC-Hohlstecker-Einbaubuchsen (…
Best non weaponized door stop on the internet Designed by: ChrisMUC https://www.thingiverse.com/thing:200571 Print instructions Printed in TPU using the 'Generic FLEX' settings @.2mm layer height. WARNING: You must use glue stick or some…
https://www.printables.com/model/6remixes from JayJey https://www.printables.com/model/259625-employee-of-the-month-fridge-magnet SeaHamsterr https://www.printables.com/model/682159-lethal-company-employee-figure…
I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.
Took me about 2 days to create this little version of a printable Hoarding Bug from Lethal Company! It isn't perfect but it gets the job done! Printed on the Ender V3 SE and used Ultimaker Cura as the slicer (used Trees as supports)…
I absolutely love the Yeethammer. It was the first large 3D printed nerf project I assembled, and it almost single-handedly got me into the hobby. As I've built more things I decided to give this incredible silly shell launching machine…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Remix of Anastasiia_Szh's project, I reduced the polygon count in Fusion360 so that I could import the bug into TinkerCAD, which does not allow files over 25MB. That's pretty much the only reason I made this remix, have fun with it. How I…
Lethal Company | Employees poses | Figures - FREE MODELS Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) Please share your makes! I would love to see them! 3D…
2 Varianten an Haltern zum aufhängen von Gehörschutz /Kapselgehörschutz / Headset 2 Variants of Holders for hanging hearing protection / earmuffs / Headsets
i used orca slicer for this printing with auto tree supports and layer height at about 0.2 mm and i also upscaled it quite a bit ill post the pics here when im done
When I built my yeethammer my plunger tube would torque down on whichever side it was being pulled from, and as a result the plunger wouldn't always latch. I found myself spreading my hand and grabbing the nut side of the bolt as well and…
I got a little too excited while using my Yeethammer and kept breaking the Breech Lifter pins. As a result, I modified the breech lifters to be reinforced by an M3 screw or bolt so you can Yeet to your heart's content without fear of…
I noticed that when priming the Yeethammer it would get stuck towards the end if I didn't pull with enough force. This was a result of the geometry of the “track” in the “cam-track-fore-l/r” parts requiring more force towards the end of…
From Lethal Company, the Delivery Rocket. The model is 11 cm tall.
Im sorry that thar is not a helmet.
Es handelt sich um eine Nachbildung aus dem Videospiel "Lethal Company". 📏Gewicht: ~260g Maße: 21cm x 14cm Update 24.03.2024: new print files
This part replaces the “cam-track-cover” on the Yeethammer to enable mounting of shell holders. The part is designed for the left side, but can be mirrored (X-axis) in your slicer to fit the right side. You may choose to install 1 or 2…
The Bracken is made from 2 parts - the leaves and the body. The body needs to be 3d printed. There is an additional presupported version for resinprinting. The leaves are made from paper and need to be cut out. The .dxf file is for laser…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Keep your page in your book with the help of a crewmate as you spectate your teammates slowly perishing one by one on a barren moon in an abandoned facility you were never welcome in! Standard Settings work fine, Ironing might result in a…
I made this a while back and had one of my friends test the file as I don't currently have a 3d printer. Idk if this works with the 1.0 version of Dummy
kleiner Remix mit einer Öffnung auf der Rückseite für einen 6x3 Magneten. Skaliert auf 125% .2 Layer 15% Infill keine Supports Zusätzlich werden 6x3 Magnete benötigt. In meinem Fall diese hier. Multi-Use Neodym Magnete - 6 x 3 mm – Starke…
3D preview Models height: ~ 3.3 - 5.1 cm | Model can be scaled up and down. | (for smaller print i recommend using something like "horizontal expansion" in Cura at 0.3mm) | Models not presupported! 3D printing settings Layer Height: 0.1 -…
Great original mode, but for everyone not living in America, we cant access imperial screws. This was designed to use a 3D printed thread section, which can be glued or left as is so the screw can be assembled and disassembled. The…
Pretty much a cosmetic piece, considering the yeethammer is a shotgun, but it does serve as iron sights if you have sniper shells.
I've included 7 individual STL's. Wubby with and without crown/baseplate and HP with and without baseplate. Also threw in the original version of the crown that can be printed separately. If you post any pics of the prints online, please…
Unfortunately the guide-bits (don't know the proper name!) sheared off my cam track. I designed this to run a 6mm M3 screw into them to reinforce against those forces. So far so good. I only did one side, you will need to mirror in your…
What you see is what you get. ☺ Data: Tablet holder to organize charging. For three tablets. Daten: Tablethalter zum Laden. Für drei Tablets.
https://www.thingiverse.com/thing:6348204 this guys helmet, just cut to fit a ender 3 also in-case you were wondering how to cut big models to fit a small printer, i used slic3r with the cut function to cut it up then export the models…
gus redux verson haaaa
The Employee(Lethal Company) Fortnite Skin
These modified silly shells are made to be loaded into the Yeethammer, then twisted (or clipped form the barrel) to prevent ejection when reloading. This lets you reload the Yeethammer much more quickly by only loading darts instead of…
Cuteness can be lethal, especially when it comes to adorable babies who melt hearts wherever they go. Indeed, an excessive dose of sweetness can cause a flood of smiles and even make people fall in love instantly. To warn passersby about…
On wall mounted (using doublesided tape or glue) Methamphetamine molecule Best results when printed with multicolor, print top 4 layers with different color.
As it was hard to source the parts needed for the Yeethammer here in EU (Sweden in my case) I had to do some remixing for it to fit an acrylic plunger tube of 36mm inner diameter and 40mm outer diameter from Amazon , cut to 145mm. However…
This sight is designed to replace the picatinny rail on the Yeethammer with a flip up leaf sight. It uses the same hardware standard as the Yeethammer, so you will hopefully have the right parts. Requires four 6x3mm magnets and one M3…
Lethal Company hair brush model. It can be used as a prop or back scratcher. Quick and easy to print
Marcos para puertas de metacrilato para cerramiento platsa Ikea. Para insertar metacrilato o plexiglas de 500x250x2mm. Una vez impreso se puede pegar. Yo opté por unirlos mediante soldadura con un estañador viejo. Incluye ranura para…
Print with the top edge on the bed. It's possible to print without supports. I used snug supports only on the bottom fillet. *Not responsible for any damage to your paintball marker! Use care when installing.
INTENDED USE: Print Domes, use plastic sheet (24" (circumference) x 14" x 0.020*" for walls. Use Printed Bracket to bolt the two tanks together using the ¼" holes, and ¼" EVA foam for the tank cross straps. * or thinner Backpack Straps:…
i made the bottles from the lethal game
This is a 3D model of the "Coilhead", a fierce and unpredictable enemy you will likely encounter, when scavanging the remnants of secluded and abandoned factories or mansions in the galaxy, for scrap to sell to "The Company". It is only…
These are replacement clips for the collars you put on pets to stop them biting/scratching/licking - known variously as "Elizabethan" anti scratch, buster, cone collars My dog is always bashing his cone on things and the clips fall off…
THIS IS NO LONGER NEEDED. PRINT THE NEW CATCH LIFTER. On my print of the incredible Yeethammer, my trigger could go past the normal position and get locked in the bullpup mechanism if I pulled hard. Conveniently, there was already a hole…
TP-LINK TAPO C310 MAGNETHALTER Ich bin auf das Problem gestoßen das ich meine Kamera leider nicht direkt an Wand / Decke verschrauben kann. Allerdings ist die Decke mit Blechpanelen versehen. Deshalb habe ich diesen Halter gezeichnet um…
Large Axle from Lethal Company. Modeled by hand to match the asset in-game since I couldn't find a great printable model online. PRINT AS MULTIPLE PARTS To print, download the LargeCog, SmallCog, and ThinRod (x2), and print separately.…
I found that I was holding the foregrip up high and the corner of the foregrip bracket was jutting into my hand, so I've smoothed that out. In addition, I didn't like how the foregrip bar could move, so I've stuck a hole in so that you…
Here is but a humble stand I made from the original breech shroud files to create a stand to display the Yeethammer. Pretty simple. Made to have a .2 clearance on each side, Can scale down in you slicer to have a .1 clearance for a bit…
A spring spacer for the yeethammer, if the spring is too short. You install it by putting it on the plunger rod after putting on the spring. so the spacer rests in the back near the catch
Mission Impossible - Ethan Hunt
Magfed Emek or Etha2!!! Supports needed for the eye cover area, part of the nose, and the mag well. Print at 6-7 walls, and as many bottom layers as you can manage. Uses 2 3mm x 10mm compression springs. I used these (amazon affiliate…
Print on it's side. No supports needed. Use the screws from your stock trigger. I super glued a 6x2 mm magnet to the square foil on the board. There is room in the trigger for one if you want a heavier trigger pull. I just used the set…
Foam gun holder. Screwed to the wall, in the form of a latch. Uchwyt na pianę poliuretanową/montażową.
Gedruckt mit einer 0,25er Nozzle, Material PETG (transparent) Layerhöhe 0,07mm Gedruckt mit Prusa MK3S+ & MMU2S
Dies ist eine kleinere Version meines Handyhalters: https://www.printables.com/de/model/906014-handyhalter Gut geeignet um zum Beispiel Tablets oder, wie auf den Bildern zu sehen, Monitore abzustellen.
I have a hard time finding a bit that makes a clean cut in soft polyurethane. This one works well particularly if you add a little lubricant (superlube) so the foam does stick to the bit. Openscad file included with customizer variables.…
Carboniferous shark with anvil-like fin.
Just your basic puzzle cube. The tolerances are pretty tight, so if you scale it down the pieces probably won't fit together. If it's too tight, scale it up a little bit and it should work.
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Lethal Company - Lethal Love A loving mini-figure that is made for that special someone in your life. Whether it's a teammate or partner in crime, this figure makes a great addition to anyone's collection. Give the gift of love this…
A Lethal Company employee with a sign in his hand. Cut into two parts for best looks. You can add text to the sign. I got the best result with variable layer height in prusa slicer (0.25 adaptive setting and added details around the top…
A simple bottle holder for IKEA Skadis. It holds my 750 ml bottle of ethanol for cleaning the build plate. Hook from https://www.thingiverse.com/thing:2853261 was used when making this.
Celebrate the ultimate "everyman" hero with this high-detail figurine of Ethan Winters. This model captures Ethan as he appears in Resident Evil Village , wearing his iconic olive-green jacket, beige sweater, and tactical gear. True to…
Tablethalterung für ein Samsung Tab A7, die Halterung wirdmittels Schrauben an einer Unterputzdose angebracht. Ich habe einmal eine Version des Halters für eine Unterputzdose mit 60er Innendurchmesser erstellt und eine mit 68er…
Simpler Ikea Skadis Magnethalter. .2 Layer 15% Infill keine Supports Zusätzlich werden 6x3 Magnete benötigt. In meinem Fall diese hier. Multi-Use Neodym Magnete - 6 x 3 mm – Starke Permanent Rounde Kleine Magnets für Whiteboard,…
Einfach an beliebiger Stelle über die Schreibtischplatte stecken. Für 17mm Tischplatte.
Inverted model of my other door design for Ikea Platsa. On this occasion, the hexagons are in the lower part for the intake of fresh air while the hot air is concentrated in the upper part and is extracted by the fan. It also has a slot…
Took me some time to figure out how to actually properly merge/group the notches from Astropulse's non-ejecting remix to a Sniper-Shell w/collet, so i figured i'd save some of you guys the hassle and upload it as a remix. Print the same…
Meine Magnete wollten einfach nicht vernünftig in den Laserausschnitten der Seitenteile halten und Klebeband war für mich auch nicht die hübscheste Lösung. Also habe Ich kurzerhand einfach eine Abdeckung gezeichnet die jeweils einen…
Lethal Company Large Axle prop Printing in the original orientation is recommended. Slicer settings should ideally be optimized - the small struts can be a pain to print well if your printer isn't tuned. Happy printing!
The Yeethandle by Reboot is an awesome model and looked to solve an issue I was having with my Yeethammer - the torque from a single side bolt handle would cause the bolt to jam. However my E3v2 wasn't going to print the single piece…
Recording Artists - Aretha Franklin
Meine Magnete wollten einfach nicht vernünftig in den Laserausschnitten der Tür halten und Klebeband war für mich auch nicht die hübscheste Lösung. Also habe Ich kurzerhand einfach eine Abdeckung gezeichnet die jeweils einen zusätzlichen…
With something like the Yeethammer, you really do need to be able to shoot ALL of the available projectiles that Silly Shells offer. I submit, for your approval, the Yeethammer-compatible Demolisher Rocket Silly Shell. This shell remixes…
A handle for a 6.3 mm Hex Shaft. Intended to assist with nozzle changes. Design considerations: Accept a standard 6.3 mm Hex Shaft. Use M3 bolts and nuts to secure shaft (likely in spares from printer build and mainenence). Large enough…
My print: Prusament PETG Galaxy Black, 0.15mm QUALITY, 0.4 nozzle, 20% infill Compatible to: “Gardena solar-powered irrigation AquaBloom” and “Aldi raised garden bed” and “Ikea HÅLLBAR” Additional required parts: 1x M4x20 screw inox 2x…
![gus lethal ape [NEEDS SUPPORTS]](https://media.printables.com/media/prints/a5251286-4f4c-492c-9ee4-64afc09bf936/images/11992339_c2e3c299-85c5-4f78-b31f-3c9e14ad2f30_ec209b97-5e88-4091-ae18-4f8d7b02015e/gus.png)
![Lethal ape sandman\ashy monster. [NEEDS SUPPORTS].](https://media.printables.com/media/prints/4b95145a-408c-434a-832d-fe114967a747/images/12068550_9cd13528-1113-4d05-96ab-7250aa3aff0f_cd0e7920-5f45-417c-98f1-bb8933167c16/screenshot-2026-02-16-103523.png)
![gus lethal ape redux [needs suppports]](https://media.printables.com/media/prints/5cd8871d-70b0-4384-a7dd-d9866ab52744/images/12004480_9e48c5eb-06ee-4810-bed6-10c96a3e0a69_afab2a87-f9f3-4f01-975e-8a61ee7f6b21/screenshot-2026-02-11-080717.png)
