Counting matching models…
Lord of the Rings (Evenstar Pendant and earrings) Print Settings: Material: PLA, PETG Layer height: 0.20mm Supports: no Perimeters: 2 Assembly is needed Happy printing!
English The original model from Thingiverse needs supports, but they are difficult to remove (at least without destroying the model :-)). I have modified the model so that it rests completely on the print bed, so no supports are needed.…
the sensor is from aliexpress: (20x25x71 mm) https://de.aliexpress.com/item/1005006008193742.html the two parts just snap together I would only print this in white :) Other colors including black will heat up more in the sun! printed with…
This Stevenson screen is compact, fully printable and easy to mount. The socket has a hole with a 12x1,5 inside thread to hold a standard PG7 cable gland. To the top, the socket has an 20x2,5 outside thread to hold the hat. The hat must…
Yet another Stevenson Screen for your weather station. The wall mounts have to be screwed. All other parts require no screws and snap together easily. Print 5 or more stevenson_shield_v3-shield.stl and stevenson_shield_v3-pole.stl for…
This is a solar radiation shield for mounting a temperature sensor outdoors. The shield allows air to flow through freely, but protects the thermometer from direct and reflected solar radiation. This provides a much more accurate…
The is a Stevenson Screen that I designed for my Arduino based weather station. The top is designed to install M3 brass threaded inserts. On mine I printed 2 middle sections and a top and bottom to make my screen. I used M3x65mm screws to…
Stevenson screen for the temperature sensor of my weather station (BME280 and an additional Thermistor, but works of course also with DHT11/DHT22 or similar sensors). I printed it with white PLA and have no problems after about 12 months,…
You can find the V2 of this project here : https://www.printables.com/model/1173424-stevenson-screen-v2-for-temperature-sensor You need: one base one bottom one top how many middles you need to reach the desired height 4 threaded shaft…
I have printed the parts using PETG filament as this was the only filament in blank white color I had in stock. Unfortunately the filament has a very poor quality. The filament appears to have very poor diameter accuracy. For this reason…
I purchased a bunch of Xiaomi LYWSD03MMC temperature and humidity sensors for use around the house. They are cheap and work very well. I re-flashed mine with some open firmware and have been using them very successfully with Home…
This is a solar shield, aka Stevenson Screen, for large sensors. It has an interior height of 100mm and interior diameter of 76mm. It uses M4 threaded inserts for assembly of the screen to the base. The interior has a small ring pedestal…
To build the Stevenson screen, you need : Stevenson screen : 1x bottom Nx cup to reach the desired height (7 for me) 1x top1 1x top2 Base : 1x base 1x PcbHolder and PcbCover 1x ExtensionArm, SolarCellHolder 1x SmaHolder (if you use an…
This is a Solar Radiation Shield aka. Stevenson Screen for Air Temperature and Humidity Measurement. It's inspired by micromet's shield but I redesigned it from scratch. It should be compatible with sensor mounting adapters for their…
This is a reproduction of the sword used by Edmund Pevensie in The Lion, the Witch, and the Wardrobe. I'm hoping the representation is fairly accurate based on the images I have found on the internet. I have divided the blade in to five…
Version 2 is available now! Outdoor Weather Station based on ESP32 and BME 280 Little outdoor weather station with ESP32 (NodeMCU and similars) box which can be mounted to a rail or similar (clamp diameter 22mm). It has an arm to hold the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a box for meteorological instruments (such as a thermometer or a hygrometer) that protects them from sunlight, water, snow, and strong winds. This box is based on a prior design I made and uploaded here . After days of frustration…
Luftdata? I'm part of a Swedish Citizen science projekt luftdata.se measuring air particles using a sds011 sensor. It's a branch from the original german projekt luftdaten.info where you can read build instructions etc in English. (You…
I remix model foe wall mount. No need supports.
-Printed with 15%infil with PETG or ABS(PLA gets too hot in the sun and deforms/cracks under recoil) -4mm roof/walls Slightly oversized so it needs a slight sanding to get it perfectly flush
The basket prints as a single piece, rather than individual interconnecting pieces, so it's less likely to come apart in inclement weather - or if a dog runs into the pole. The interior is designed for smaller sensors, up to 35mm x 58mm.…
sevens duel disk, deck box comes off. i dont like this design though i messed it up a little sorry Category: Props
Summary Simple stevenson screen for outdoor thermometers. Stackable, and easy to print. OpenSCAD file is included if you want to customize it further. I used this to mount my AcuRite outdoor temperature sensor. Design Each level has holes…
Helical fins based radiation screen for temperature / humidity sensors. Parts have tight tolerances and interfaces, calibrated printer is required. 4 parts are needed: Main screen part. (No supports) Wall bracket. (Tree supports) Sensor…
Solar Panel Holder + Stevenson Screen from those things i build myself a… Solar Powered, Weather Station! featuring LoRa technology this is a standalone weather station i build. the main point i wanted to achieve is to broadcast the data…
I really like the SwitchBot outdoor temperature and humidity sensor as it is, but I don’t have any shaded area to place mine. As a result, direct sunlight affects the readings and makes it unreliable. To solve this, I designed a simple…
Remix of @Tom_62253 excellent Stevenson Screen. I wanted the base to be a little more lighter weight and specifically hold a DS18B20 temperature sensor. I also wanted a simple wall mount to screw it to a flat surface. Fits this sensor…
This is a reproduction of the arrow head and notch used on Susan Pevensie's arrows in The Lion, the Witch, and the Wardrobe. I'm hoping the representation is fairly accurate based on the images I have found on the internet. There are…
Stevenson screens protect ambient sensors from direct sunlight and rain, ensuring constant airflow (based on temperature differential) to provide accurate readings. Due to how they are built, you will not be able to see the screen of your…
Purpose designed part, may not fit your rifle exactly as the Stevens marksman rifles were built in the 1930's and the wood stocks may not all be the same. i.e. mounting hole locations, profile, curvature, etc. Original crumbled and was…
This is a Stevenson Screen meteorological shelter for enclosing an outdoor weather station. It's been designed to fit on to 40mm push fit waste pipe (which is very cheap and easy to get). It's a very tight fit to ensure it doesn't come…
This is a reproduction of the shield used by Peter Pevensie in The Lion, the Witch, and the Wardrobe. I'm hoping the representation is fairly accurate based on the images I have found on the internet. The shield is divided in to six parts…
Outdoor temperature sensor cover - Stevenson screen. For sensor with 7mm diameter. In sensor tube mount added cutouts for zip ties. Printing without support. For assembling 2x M4x20 are needed. In cover two holes needs to be taper M4…
Grey's Anatomy - Izzie Stevens (Katherine Heigl) - 2005 3D printable model.
designed to fit into a 20mm diameter electrician's RK tube. print enough "bodies" to contain your sensors. with 2 body+cap i inserted a DHT11 for humidity and temperature, and a BH1750 for brightness. diameter 60mm
This is a reproduction of the scabbard used by Edmund Pevensie in The Lion, the Witch, and the Wardrobe. I'm hoping the representation is fairly accurate based on the images I have found on the internet. I have designed this scabbard to…
A modular, customizable, snap together general purpose weather protector (aka Stevenson screen ) for sensors like my temperature and humidity sensor. Usage : Open the .scad file and enter the bounding box of your sensor (or thing) you…
This screen can contain additional sensors, not only described in sensor community manual (GPS, OLED/LED display etc). PCB board Also you can use compact and convenient PCB board for connecting components used in the Sensor Community…
simple slot everything together and secure with the the M3x60 bolts. Parts to print: Top x1 Intermediate screen x2 base x1 mounting bracket x1 Print Settings: Filament - PETG (or other UV resistant filament) Layer height - 0.3 Support -…
I created this Stevenson Screen for our outdoor thermometer. There's plenty of similar designs on thingiverse, but I'm also learning how to create such things with Fusion 360, so it was a learning experience as well. There are two parts…
Intro A compact, modular Stevenson screen designed specifically for the Aqara WSDCGQ11LM square temperature & humidity sensor. The sensor installs into the Lower Part using a snap-in cradle with a latch (no screws or glue) and can be…
Outdoor thermometer SwitchBot Indoor/Outdoor Thermo-Hygrometer sensor, stevenson screen
Stevenson Screen made up of modular, exchangable parts. I will add more parts in the future. To make this as shown in the pictures, you will need to print 1x base ring, 1x sensor-tray ring, 2x simple rings, 1x top and 1x of the sockets…
I remixed the model in order to hang it in a tree and made the holder more stable. Need no supports.
This cage helps to mount your Dragino LHT65 temperature and humidity sensor in an Stevenson Screen https://www.thingiverse.com/thing:83969
Stenvensonův radiační štít vhodný pro čidlo meteostanice. Vnitřní průměr 81mm výška 78mm. Tisknutelné bez podpor. Vytvořeno pro čidlo Thermopro TX-7C.
This is a reproduction of the shield used by Edmund Pevensie in The Lion, the Witch, and the Wardrobe. I'm hoping the representation is fairly accurate based on the images I have found on the internet. The shield is divided in to nine…
Fun sign with Pippin's legendary list of meals! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 134.82x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max…
Meshtastic Weather Station Node case compatible with the Acurite 06054 Stevensen Screen Node case with plenty of room for sensors Case snaps into screen securely but can be easily removed All connectors come out the bottom of the screen…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
A stevenson screen, i made it for my own weather station based on an ESP01 (ESP8266) and a BMS280. I self printed it in white PET-G. It is also possible in PLA but then you have the problem that it will dissolve over time. In my picture i…
Modified the original model to have bigger wall mount and to have less parts. Consists of two parts only - the mount and the cover that slides into the mount. Just place the mount, put the sensor inside and slide the cover. The cover does…
Update: I made a new TPU version of this Running the two with identical sensors in parallel shows: PLA wins . More below. The problem with sensor housings is that they always add to the failure margin of the sensor's measurements. This…
Uses 8mm * 2mm magnets A bit janky but it works! *use this logo as im not sure if the other one fits **also i mashed the logo with the other part in bambu slicer and printed it in 2 colors useing ams. Im not sure if you would be able to…
This is a printable replacement stock for the Stevens Crackshot 26. it is strongest printed along the long flat base. The fusion 360 file is included so you can adjust the depth of the larger hole to adjust for different sized screws.…
Another Stevenson screen in cylindric shape. No internal support to hold the sensor. Preferred filament color is white to reflect most sun radiation. Preferred filament is PETG, but other filament may be used. No support, no brim…
Danke an @Zdenis und @cybershifter (Thingiverse). Thanks to @Zdenis and @cybershifter (Thingiverse). This is my first work with thinkercad. Sorry for maybe small issues.
These models are designed to make fitting the component parts needed to run the Enviro Weather (Pico W Aboard) & Enviro Urban (Pico W Aboard) boards into the Stevenson Screen from Pimoroni easier. The 'LiPo Amigo Pro holder.stl' part is…
-added a mesh to holder -made an extra mesh for the other side or if you already printed the holder (just cut some mesh out to push your usb plug) -holes and nut traps now M6 because it is lighter and look more the right size .. if you…
Made by cybershifter (thingiverse): Necessity is the mother of invention, so I made a thing. This Stevenson screen is designed to shroud a BME280 sensor mounted to a breakout board, to shield it against the elements in a controlled…
This is designed to be a Stevenson Screen for 1-wire F5 MicroCan (iButton) sensors that can measure and log temperature and humidity data. The parts can easily be clipped together to build a tower containing multiple sensors. It has two…
GoPro Stem Mount for Stevens/Scorpo hexagon shaped stems. Simply use zip ties (5mm) to fix it to the stem.
If you are lazy to source the threaded shafts, this just clicks in. Tested with PETG, the pins are still relatively small, and the layer aligment is not greatest, so better dont try to disassamble it too many times... Just screw it on to…
A simple set of models to make a stevenson screen. These slide over a 6mm Dalas based temperature probe cheaply found on ebay. For more information about Floaty McFloatface, from which this thing is from, visit…
Made a very shallow trinket tray for my LOTR kitchen. I used Inland luminous filament in PLA so the design would be glow-in-the-dark.
Stevenson-screen style solar radiation shield for the IKEA TIMMERFLOTTE outdoor thermometer sensor (64mm x 18mm). Printable as one piece, no assembly needed. Features: - 5 angled louver plates (45 deg slope) for airflow + sun shading - 12…
A Stevenson screen or instrument shelter is a shelter or enclosure that protects meteorological instruments against precipitation and direct heat radiation from outside sources while still allowing air to circulate freely around them. I…
Needed a twofer stevenson screen for my ecowitt WN32 and WH57 modules but didn't want to overengineer the thing soooo The two modules slide into the stevenson screen, but they're actually held up by the bottom screen piece. This helps…
Radiation shield for temperatures and humidity sensor Tuya Zigbee
Primeros pasos con Fusion 360 creando un protector para un termómetro de la marca TFA. El diseño es fácilmente adaptable a otros modelos, ya que permite añadir o quitar láminas intermedias según se necesite. El conjunto está formado por…
It's my second take on that theme after Stevenson Screen 87mm . Same dimensions here but while the former was just a remix I recreated all elements here in freeCAD so tasks like i.e. adapting the thickness are much easier now. I have my…
I wanted a holder for my ESP8266 dev board and some sensors within my stevenson screen so I made a simple mesh holder with plenty of room! Print Settings Printer: RepRapPro Mendel Rafts: No Supports: Doesn't Matter Resolution: 0,2 Infill:…
Hi weather frogs, today I finally finished the housing for the AQM II, extruded it using a 3D printer with UV-resistant ASA filament. Since I still had a Stevenson screen, I looked for a variant to integrate the AQM II. Since I really…
Remix of @Tom_62253 excellent Stevenson Screen. I needed to mount on a vertical pole that have a 50mm diameter. by this i also needed to change the screw hole so it was in the rights place for the vertical pole. All other parts for this…
Bonjour, Un ami à cassé ce petit clips de garde-boue de son vélo de marque STEVENS, le modèle est un "randonneur lite" de 2016. J'ai donc reproduit la pièces qui est maintenant disponible pour tout les cyclitse qui auraient rencontré le…
A model of the ‘Lucky Sevens’ event item from Touken Ranbu, created to give away at cosplay meetups. One face is slightly thicker than the others - put that against the build plate to help compensate some for that initial layer squish.…
⚠ A newer version is available. This is the first version of the enclosure. An improved version 2 has since been released with a larger diameter, an optional dome top cap for a light sensor, a cable pass-through in the base plate, and a…
Building on the Stevenson screen as linked below, this simply adds a bit of a hook or loop to attached the sensors.
This is a wall mount that I created to go with the scabbard and shield I created for Edmund Pevensie. In order to use this mount, connect two of the shield holders to the scabbard holder with some rope/string (see my attached make to see…
Its a bunch of sixes and sevens of different fonts and different sizes. Why? I dunno. I really don't.
• Compatible with camera adapters • M12 × 1.5 mm thread for PG7 cable glands • Dedicated thread for the Stevenson screen See my other posted models for mounting arms and 26.4 mm (3/4") pipe clamps. Due to several requests, I added a…
Support for stevenson monitor. Mast mount with straps. M4 screw for monitor. Designed for round mast mount of https://www.printables.com/model/202225-solar-radiation-shield-stevenson-screen-for-outdoo
Mostly parametric (see the Fusion drawing parameters), 3D-printable Stevenson shield (weather screen) designed in Fusion 360 for an ESP32-based LoRaWAN weather station. Could be used for other purposes too. It protects the BME280 sensor…
Inside dimensions: 44x44x20mm Sonoff SNZB-02 temperature and humidity dimensions: 42x42x16mm Category: Outdoor & Garden
Stevenson Screen can be hung anywhere with eye bolt. Nozzle: .4 mm Layer: .2 mm Filament: Sunlu Rapid PETG White PEI Build Plate Magigoo Adhesive Temperature: 250 No Supports 15% infill 3 Walls 1 1/2 Inch Eye Bolt ¼ Inch (hardware) and…
Air360 Stevenson Screen Enclosure is an outdoor housing for the air360 air quality monitoring station. The enclosure is designed to place the air360 ESP32-S3 shield, the controller board and connected sensors inside a ventilated…
Learn more about Braillest's embossing and repair process here . https://github.com/Braillest-Books/The-Strange-Case-of-Dr-Jekyll-and-Mr-Hyde-by-Robert-Louis-Stevenson
This six-sided dice is labelled with the words "odd" and "even" instead of numbers. Three sides say "odd" and the other three say "even". When the dice is rolled, there is an equal chance of landing on either outcome. It is a simple and…
U can use this screen for temp and humidity sensors for oudoor projects.
Added a mount bracket with camera clamp adapter. stevenson_large_mount_glue – smaller ring and smaller holes. Use 1.75 mm filament and some acetone or super glue to bond the parts together. stevenson_large_mount_screw – larger ring and…
Ventilated, support-free enclosure for a DIY weather station living inside a Stevenson screen. The ESP32-C3 Super Mini and the LM393 rain-sensor controller sit side by side in the main box; the AHT20 and BMP280 live in two separate…
TRIDIX Screen – The Modular 3-Layer Double Helix Radiation Shield (Stevenson Screen) Are you looking for a helical modular solar radiation shield that is aerodynamically perfectly shaped? Whether you use the universal STLs with your…
Рассчитана для использования с ESP или Zigbee модулями. 4 слота для батареек AA. Прокладка печатается FLEXом. Print Settings Printer: Prusa like Rafts: No Supports: Yes Filament: Bestfilament ASA, ABS white Notes: Заполнение по вкусу.…
Using https://map2model.com/ I created a map of Lake Stevens followign the city limits and generated a 3mf for multicolor printing. This was designed to print on a Prusa XL.
CR2032 batteries don't really "live well" in freezing conditions, so i converted one Xiaomi sensor to run on two AAA batteries. I added a battery holder on the stevenson screen from "Mepea". I uploaded only center part with battery…
Materials https://www.printables.com/model/201564-xiaomi-lywsd03mmc-stevenson-screen Since outside, recommend printing in ASA using a light color such as gray Two medium command strips (outdoor, clear) Can purchase a refill pack that…
This case is for an automated solar panel turntable system that tracks the sun's position to maximize energy efficiency. The design features an integrated Stevenson screen housing that protects environmental sensors (such as BME280) while…
Die Tacho Halterung Stevens Caleta habe ich für mein Caleta 7.2 gemacht sollte aber auch für andere Caleta passen. Um den Funk Sender am Rad möglichst unauffällig zu halten. Der Fahrradcomputer ist der Sigma BC10.0 Gedruckt in Prusament…
