Counting matching models…
This test piece allows you to estimate the shrinkage of the material. The piece is designed for resin printers, however, it can be also used for FDM printers to estimate shrinkage and You should print the test piece with regular settings…
Accurate reproduction of the human spine, with support base for exposure. Instructions Printed parts can be assembled without using glue. The plate can be personalized by attaching a sticker. Category: Biology
Shimano technical training has a process for cleaning the pistons on the disc brake calipers which relies on cutting down a bleed block (such as this design is based upon) to make a piston exposure tool. Having to hack apart a bleed block…
I made this R_E_R_F test for my Anycubic Photon Mono M5S Pro. I didn't like the original R_E_R_F from Anycubic because I want a clear feature showing success or failure. Thats why I took the Cones of Calibration V3 - made by…
For printers like the Saturn 4 Ultra that support resin calibration by printing multiple exposures in the same print, it is difficult after print to distinguish between the exposures. To avoid removing and cleaning them one by one, this…
The Exposure Calibration Test Stop wasting time marking your test prints with pens that wash away in IPA! This is a functional remix of the XP2 Validation Matrix by Photonsters Key Improvements in this Remix Embossed Numbering (1-8): Each…
This STL is an 8-up copy of the Photonsters Resin Exposure Test v2 arranged for use with the Anycubic Photon M3 Plus. Here's what I've done: Subdivided the 197mm x 122mm build platform into 8 equal sections Scaled the original STL by 95%…
Thank you to @Darragh for supplying a .step file for me to add another layer of resolution to their exposure test for my mono resin printer. Just for clarity, you will have to adjust the exposure time in your slicer to match the number on…
This is the original Siraya Tech Test 2021 V5. I just used Orca Slicer to arrange in the position for the multi exposure test on my Elegoo Saturn 4 Ultra. And cut the numbers on each test so they match the numbers on the screen of the…
Pinhole Exposure Calculator , inspired by Richard Koolish paper calculator , is a model designed to assist users in determining the optimal exposure time for pinhole cameras. The calculator comprises three disks, each contributing…
The exposure memory lock button for the Nikon F3 SLR film camera. These things are known to break and fall off the body.
Friction fit screen printing frames. Use the tension ring to secure a piece of mesh screen printing fabric to the frame. coat in UV resin and expose using your resin 3d printer. Watch the full video and demonstration here:
http://www.sp-dynamo.com/8Xseriesdynamo%20hub.html http://www.sp-dynamo.com/8-series-pic/connect-installation.pdf instructions for connector installation. I have an Exposure (rebrand of Shutter Precision) PD-8X 6V, 3W dynamo hub, for…
When using the exposure test of the Elegoo Saturn 4 Ultra 16K, the individual test objects must not overlap the boundaries of the 4, 6 or 8 segments under any circumstances. To ensure this, especially with larger test objects (e.g. the…
Numbered for use with Elegoo Saturn 4 and Mars 5 resin exposure testing tools. I've set the cover image as an example on my own Mars 5 plate, set to 60% scale. For an example on how to use the test properly, see the linked video: I didn't…
This is model of the Thor's hammer as a museum exposure. The base is 120 mm long and 70 mm wide. The hammer is 38 mm long and 23 mm wide. It is possible to print it on FDM and resin printer. But for FDM printer it has to be sized, because…
Multiple Exposures XP2 Calibration Test for printers that can do multiple times.
Designed to clip on rail from below first, then other side from top so they counter act and less likely to pop off; a sort of clip twist. Light can be clipped in before or after mounting to saddle. Should clamp opening should point…
Made for my Exposure Lights Diablo light - fits Joystick too I think - to mount on my Specialized out front mount GoPro adaptor. It's a good snap fit but includes tabs in case one wishes to double up with an o-ring. Print Settings Printer…
Simplifying my previous mount : this one is cleaner but works just as well if not better. Two included: An offset mount that still allows printing without supports but moves the light away from bars. Perpendicular like a normal mount.…
Just center your test model on each placing square and delete the layout helper. Added a second version that helps to lift all models in one go. I've also included the “M3 8x layout.scad” OpenScad file for tuning for another printers,…
This is an adapter to mount the Exposure rear light on a Specialized saddle using the SWAT™ brass mounts. It keeps the light higher than mounting on the seatpost and is probable more aerodynamic. I mounted it on a Specialized Power Pro…
PLA CF provides a nice finish and seems good enough but PLA tough might be best.
I decided printed and laminated signs weren't good enough, so I improved Provided gcode files include colour change at the appropriate layer for the text elements v2.0 corrected spelling and reduced thickness of background plate
This is a better version of this cassette. Just plain easier to print and does not require glue BUT The outer shell should be printed with 0,4 line width . you can try to go thicker, but i can't assure that the slicer will slice the…
A minimalism clip-in light mount for EXPOSURE Trace (or same OD) light. It is designed with a slightly tilted down angle which fit with a horizontal leveled front reach bike computer mount. Compatibility: Standard bike computer out-front…
This is model of the Captain America shield as a museum exposure, as you could see in "The Falcon and The winter Soldier" series. The base is 120 mm long and 70 mm wide. The shield is 100 mm in diameter. You can print it on FDM or resin…
This file has 8 of the photonsters resin validation matrixes pre-aligned for the built-in exposure/calibration test on the Elegoo Saturn 4 Ultra 16K. Each part is embossed with numbers 1 - 8, no more mixing up pieces or scribbling with…
A minimalism clip-in light mount for EXPOSURE Trace (or same OD) light. Compatibility: For most of the bike front rack or fork with M5 screws. Print Instruction: Recommend to print with PLA Tough/Professional or PETG with a thicker wall…
A UV exposure box is an extremely useful piece to make PCBs. I have searched and found that they are too big and too expensive for my uses. In addition, all the devices require an external power sorce. Thereupon I decided to build one…
Polaroid Dual Exposure Lens Cap for the OneStep2 & OneStep+ HOW TO USE: Hold the shutter button once subject is in frame to take a photograph( remember to move the subject in frame closer to the open side of the lens cap as only half will…
Exposure button for Flexaret VI Print Settings Printer Brand: Creality Printer: CR-10S5 Rafts: No Supports: Dont need Infill: 100 Filament: Spectrum Premium PLA black Notes: Use glossy filament, I had only matt available. Post-Printing…
Polaroid Dual Exposure Lens Cap for the OneStep2 & OneStep+ HOW TO USE: Hold the shutter button once subject is in frame to take a photograph( remember to move the subject in frame closer to the open side of the lens cap as only half will…
After doing some research on taking exposures longer than 1 second with the Mamiya RB67, I was presented with two choices. The first purchasing the dual threaded cable release on Ebay for ~80$ USD (at the time of writing this) or manually…
Fits to Bar Fly 'Spoon' style mounts; those found on Cervelo, Specialized etc. Print Settings Printer Brand: Formlabs Printer: Formlabs Form 2 Rafts: No Supports: Yes Resolution: 0.1 Filament: FormLabs Gray Pro Resin Gray Post-Printing…
3 Colour ‘Filament Painting’ model - 'Romance' double exposure portrait, made using Sunlu filaments. (I recommend the following speed settings for the bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse…
Print Parameters : 0.2mm layer height - 5 Perimeters - Supports Required (WILL BE ADDING DO's & DONT LIST REQUIRED FOR ANEK PHOTOGRAPHY SOON) ANEK - अनेक More than one | Multiple | एक से अधिक । In photography and cinematography, a…
As usual I give editable links here : https://www.tinkercad.com/things/klPYsMIg49L-lamp-holder-v0o01
Polaroid Quad Exposure Lens Cap for the OneStep2 & OneStep+ HOW TO USE: Hold the shutter button once subject is in frame to take a photograph( remember to move the subject in frame closer to the open side of the lens cap as only half will…
I created this to drop into the meter platform on our Cs-137 exposure rate calibration rig during our Ludlum 14C calibrations. The current version works pretty well as a press fit holder, but the lid is prone to breaking. Will hopefully…
Door Hardware for Newell Acoustic MB72 UVC exposure cabinet Print instructions Prusament PETG
I have a great set of lights, however I have a HP Velotechnik Recumbent Tricyle, which means I don't have the traditional handlebars, or seat post on which to mount my lights. I needed to be able to mount the rear on the chain stay, and…
The late 1960s/early 1970's Fujica P300 Single-8 cine film camera has a fully automatic exposure system that relies on a light dependent resistor (LDR). It has no manual override, which was a problem for the one I have that had a failed…
I bought an LED UV exposure light for exposing the emulsion on screenprinting screens. This Bracket adapted the light to mount on a mic stand, and it aims down to the screen with 24" spacing. I warmed the threaded end on the Mic Stand and…
Exposure Blaze MK3 is apparently a really expensive light that comes with a not very durable clip for mounting on the seat post. I made this for a buddy of mine who's really thrilled about my design's performance. There are stls for 27.2…
-Introduction- Have you ever felt that your Shimano brakes don’t engage or bite the rotor quickly enough? Would you like your caliper to start pressing the brake rotor as soon as you touch the lever, without so much dead space? Have you…
Finally. I can get paid in exposure! Category: Coins & Badges
I have a great set of lights, however I have a HP Velotechnik Recumbent Tricyle, which means I don't have the traditional handlebars, or seat post on which to mount my lights. I needed to be able to mount the front on the main boom, and…
Mount to attach an exposure light to a go pro buckle. The light is held by a band along with the standard threaded hole. Two m3 countersunk bolts/nuts are used to hold the band to the buckle while the front exposure screw is m5. Fits…
Cap over lens, then rotate clockwise 180 degrees, taking picture 2 x left/right or top/bottom
I recently bought a used Bronica SQ-Ai medium format camera, and the first time I tried to use the multiple-exposure lever (which, aside from its obvious application, is needed to trip the shutter when you don't have film loaded), it fell…
Grid template to assist the right placement samples in the printer platform on multi-exposure for resin testing (for Elegoo Saturn 4/Ultra (12K) print area: 218x122mm.) [Any other print area is available on request]
Frame components for Newell Acoustic Phoenix MB72 UVC cabinet Print instructions Prusament PETG
XLR dummy mic support base for Newell MB72 UVC exposure cabinet Print instructions Prusament PETG
Broke mine so I made a new one.
The end cap for my Exposure Switch fell off. They do apparently have excellent customer service and I could get a replacement/repair, but I decided to make my own. Firstly for the challenge, and secondly because I think a deeper cap might…
This is a gopro compatible mount to hold an Exposure Diablo 15 bike light
Lets you mount an Exposure Boost 3 light on the go-pro type attachment on the underside of an out front computer mount. I printed in Sunlu PA12-CF but any reasonably stiff plastic should do the job. I would encourage the use of a rubber…
Just a clip for the tracer mk3. I'll add the derived updates for mounting afterwards but the clip works which is the first stage.
This is a bicycle light mount adapter to get the Strada eXposure light to attach to a generic bike light mount. It probably won't fit your mount, but you can change the design yourself in OnShape.…
⚠ Please Read the Instructions First These carriers work like the original Beseler carriers, but they are plastic, not metal, and plastic has to be handled differently. The included PDF walks through printing and assembly step by step.…
Rack mount for the Exposure mk3 tracer bike light. For some reason I had to print this at 200%. I must have messed up the scaling when building the model but it fits perfectly.
⚠ Please Read the Instructions First These carriers work like the original Beseler carriers, but they are plastic, not metal, and plastic has to be handled differently. The included PDF walks through printing and assembly step by step.…
I added a large X & Y and oriented the models for their respective orientations
This is a gopro compatible mount to hold an Exposure Diablo 15 bike light
Grid template to assist the right placement samples in the printer platform on multi-exposure for resin testing (for Elegoo Saturn 4/Ultra (12K) print area: 218x122mm.) [Any other print area is available on request]
A minimalism clip-in light mount for EXPOSURE Trace (or same OD) light. It is designed with a slightly tilted down angle which fit with a horizontal leveled front reach bike computer mount. Compatibility: Standard bike computer out-front…
A minimalism clip-in light mount for EXPOSURE Trace (or same OD) light. Compatibility: For most of the bike front rack or fork with M5 screws. Print Instruction: Recommend to print with PLA Tough/Professional or PETG with a thicker wall…
