Exposure Lights Mount Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.18 – €1.44 net (excluding VAT)
For file: Front_Boom_Mount_1h25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.31 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.42 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fit the mounts in opposite plane, i.e. front light to vertical post. In my case for Recumbent Tricycle.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 434
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I have a great set of lights, however I have a HP Velotechnik Recumbent Tricyle, which means I don't have the traditional handlebars, or seat post on which to mount my lights. I needed to be able to mount the front on the main boom, and the rear (see other model) to a horizontal stay.
There is a threaded boss on the from boom, so the mount is attached by a single cap-headed Allen (hex) bolt.
Printing on it's side keeps the supports from interfering with the bolt-hole, and improves strength.
I hope this helps. Please leave a like if it does, and post any makes or remixes.
All designs (however rubbish) are my own, and are made available for non-commercial use. Sale of design or prints is prohibited.