P
PrintablesAndreas G
Collar Stays Card
Introducing the CollarCard: three sets of collar stays in credit card format. The stays are 9, 10 & 12 mm wide.
- Downloads
- 225
- Likes
- 94
- Rating
- 4.5
Search results: stay
Counting matching models…
P
PrintablesCodeFuPanda
Stay On Target
A little late for May 4th Day, but I figured this would make a great wall art. Not exactly sure who the original artist was who created this illustration. This is my first attempt at printing with filament change for multi-color. I turned…
- Downloads
- 153
- Likes
- 121
- Rating
- 5
P
Printablesthiebes
Stay ring for silicone baking mat
Very simple design for a ring that keeps your silicone baking mats rolled up. Inner diameter: 28 mm. Print file has 3 rings in one print. No supports needed.
- Downloads
- 129
- Likes
- 28
- Rating
- 5
P
PrintablesPrism08
Fridge stay open tool
My use case for this device is the basement fridge we only use for parties or when friends are staying over. The rest of the time this fridge is powered down. With this tool the fridge doors will stay open and you won't close them by…
- Downloads
- 46
- Likes
- 8
- Rating
- 0
P
PrintablesStrandedOrg
Quick Assorted Collar Stays (2, 2.25, 2.50 & 2.75 inches)
Quick assorted collar stays in various sizes. Includes 2 inch, 2.25 inch, 2.50 inch and 2.75 inch (51mm, 57mm, 64mm, 70mm). These can be printed before you figure out how to tie a tie!
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
PrintablesJérémy Reeder
Seatstay Struts for Rear Bicycle Rack
This is a stabilizing strut, for attaching the Vélo Orange™ Constructeur Rack on the rear of a bicycle at the seatstay-arm bosses. It is sized for a medium-size Vélo Orange™ Pass Hunter frame (2nd generation, circa 2020). Mounting Two…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesJerry Lee
Coffee Stay Fresh Bag Clip - UPDATED - Aug 16, 2024
NEW Added 200mm clip arm for larger bags. Updated: 08/16/2024 - added an extended angled version of the insert to accommodate low cabinet clearance. @Leon61 thanks for the suggestion Updated: 04/07/2024 - added an extended version of the…
- Downloads
- 10,420
- Likes
- 1,281
- Rating
- 4.77
P
PrintablesRob the 3D Printing Dad
Stay-on Reusable Cable Tie in TPU. For USB, HDMI, DP, UTP and Power cables and more
It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year : my custom-designed, reusable TPU cable ties . After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that: stays…
- Downloads
- 3,458
- Likes
- 1,022
- Rating
- 5
P
PrintablesGCV3D
Collar Stays
Overview I always seem to lose my shirts' collar stays when doing laundry. Luckily, they are simple and fast to print! 3D printing collar stays also allows for easy customization, like the chevrons I've included on the version I printed.…
- Downloads
- 2,090
- Likes
- 837
- Rating
- 4.95
P
PrintablesPeter Farell
Stay Puff Marshmallow Man
Stay Puff Marshmallow Man.
- Downloads
- 2,055
- Likes
- 378
- Rating
- 5
P
PrintablesBubba Gump
Portable Urinal – DJ PeeMix – Stay in the mix, even when nature calls!
“Never miss a beat (or a bathroom break)!” “Mix & Relief – Spin tracks, not your bladder!” “The Bathroom Line is longer than your setlist!” 🎧 The Problem: Every DJ has been there. You’re in the middle of an electrifying set, the crowd is…
- Downloads
- 1,402
- Likes
- 591
- Rating
- 4.43
P
Printableskevinb2
Stay Away From Server Room
There's 2 files with filament changes at either 0.8mm or 1.6mm. This allows for a fast or strong print. For Prusa Mini owners, change the skirt distance from object from the default 2mm to 1mm to ensure no toolpath errors
- Downloads
- 1,133
- Likes
- 100
- Rating
- 5
P
PrintablesWill
SV08 Toolhead Cover (cools, stays on, eddy compatible)
v13.1 is only available in .step. Fusion 360 keeps breaking my stl / 3mf outputs for this version, so STEPs for all. If you need an STL or 3mf I can add one, just be aware it would need to be repaired with your slicer before printing.…
- Downloads
- 678
- Likes
- 108
- Rating
- 4.93
P
PrintablesFrancesco Lamonica
Stay Puft Ghostbusters Marshmallow man
A few notes on the profile: I separated objects by color: body parts, blue stuff, red cloths etc. the head and the hat strip are the only multicolored objects (AMS) so are on separate plates from other parts The hat strip has enabled the…
- Downloads
- 641
- Likes
- 75
- Rating
- 5
P
PrintablespTree
Christmas Stocking Hanger for Mantle or Shelf | Balanced to stay put
Christmas Stocking Hanger for Mantle or Shelf. Balanced to stay put on the edge without sliding off. 2 versions. one with 90 degree edges and the second with rounded edges. Print on its side. For filament with poorer adhesion I recommend…
- Downloads
- 400
- Likes
- 45
- Rating
- 5
P
Printablestechgems
Fate Stay Night Saber's Excalibur - Fusion 360 File Included
This is excalibur from fate stay night used by Arturia, also known as Saber. It's currently cut in pieces for a 200x200x180 buildplate, but you will also find the full stl in case you want to slice it yourself. The sword has an 8mm hole…
- Downloads
- 390
- Likes
- 58
- Rating
- 0
P
PrintablesHawwwran
StayPut Backpack Hook
ENGLISH Upgrade your backpack with this multipurpose hook designed to prevent items from slipping off your shoulder. Ideal for musicians, hikers, and daily commuters, this hook securely holds ukuleles, jackets, bags, and more in place.…
- Downloads
- 389
- Likes
- 301
- Rating
- 5
P
PrintablesAndulka
Staying Snoopy
Staying Snoopy designed with the help of AI. Prepared for handpainting.
- Downloads
- 380
- Likes
- 32
- Rating
- 5
P
PrintablesAndreas Scheuerer
Motorhome Door Catch/Stays and Base ... Wohnmobil Türhalter
These different styles of catches and the corresponding base to hold all your motorhome, campervan and caravan lockers open! I rounded the edge at the end of the mounting holes to make it more stable. I have also added additional straight…
- Downloads
- 378
- Likes
- 61
- Rating
- 5
P
PrintablesNinomalbinho
Bibendum Chamallow (Stay Puft Marshmallow Ghosbusters)
A new 3D figurine generated by AI, Bibendum Chamallow (Stay Puft Marshmallow Ghosbusters). Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld…
- Downloads
- 366
- Likes
- 46
- Rating
- 4
P
Printablesfrijoles
Collar Stay
This is my current collection of collar stays for my dress/work shirts. These are modelled from my actual collar stays that came with my work shirts which needed replacing as some broke over time and others went AWOL. I suggest printing…
- Downloads
- 345
- Likes
- 54
- Rating
- 5
P
Printablesv1ncen7
Universal Rear Lower Seat-Stay Bike Mudguard (Short & Long Versions)
A sleek, minimal rear mudguard designed specifically to clamp onto your bike's lower seat stays using standard zip-ties. This style of fender provides critical, close-proximity protection for lower frame linkages, suspension pivots, and…
- Downloads
- 314
- Likes
- 63
- Rating
- 5
P
PrintablesDave
Honda jazz/fit bonnet stay clip - 2016
Honda jazz/fit bonnet stay clip - 2016 model Grey version is abs after 5 years use. Printed in abs/petg
- Downloads
- 283
- Likes
- 32
- Rating
- 5
P
Printablesheartfrappe
Stay Puft Marshmallow Man Figurine
Stay Puft Marshmallow Man Figurine from the original Ghostbusters film.
- Downloads
- 248
- Likes
- 28
- Rating
- 0
P
Printablesneotoy
Stayhold Buckle Improved
A slightly improved version of the classic STAYHOLD nylon buckle. Fits 27mm max width straps. No-sew design allows strap loops to be threaded onto the buckle. Prints without supports. Some light assembly required! Updated 2026-09-20 Added…
- Downloads
- 233
- Likes
- 93
- Rating
- 5
P
PrintablesJamie Turner
Honda Bonnet/Hood stay clip
I didn't want to pay £6 for a cheep clip that someone else broke on my car. so I spent many hours designing and printing this clip to replace it. Many Hondas use this type of clip with part no.: 90672S5A003. My car is a 2007 accord.…
- Downloads
- 224
- Likes
- 25
- Rating
- 0
P
PrintablesWF3D
Connect 4 - "Stay at home edition"
This is a simple Connect 4 game which you can print and enjoy while staying at home. For more details you can see my video right here: https://youtu.be/ZiULWFkq_H4 The base is 200 x 142 mm (x y) and the grid is 191 x 130 mm (x z). The…
- Downloads
- 223
- Likes
- 38
- Rating
- 5
P
Printables3DCraft
Ghostbusters Stay Puft Marshmallow Duck
Perfect for fans of the classic movie, Halloween collectors, or anyone who loves themed 3D printed ducks. Cute, creepy, and nostalgic — a must-have tribute to one of the most famous movie monsters.
- Downloads
- 220
- Likes
- 47
- Rating
- 0
P
PrintablesJohn duck
Bonnet Stay Clip Arm Rod Prop For Vauxhall Opel Combo Corsa C Meriva A Tigra
Bonnet Stay Clip Arm Rod Prop For Vauxhall Opel Combo Corsa C Meriva A Tigra
- Downloads
- 220
- Likes
- 18
- Rating
- 0
P
Printablesspec997
Danger: Stay away from Server Room #2 - REMIX
MMU flat remix - Danger: Stay away from Server Room #2 from https://www.thingiverse.com/thing:4369725
- Downloads
- 219
- Likes
- 71
- Rating
- 5
P
PrintablesImagine That
Stay Puft Marshmallow Man
Stay Puft Marshmallow Man from Ghostbusters Single Extruder multi-color print First layer: White Second layer: Red Third layer: Blue Fourth layer: Black
- Downloads
- 209
- Likes
- 36
- Rating
- 5
P
PrintablesM1324
![TPU/PLA Bike Chainstay Protector [Designed for Aventon Level 2]](https://media.printables.com/media/prints/910939/images/6960035_d2154b2b-50fd-4fb9-b68c-ecaf6ecbb1b8_4f84104e-0cb4-4e69-8d21-d9fa053aa65f/image_20240612170641.jpg)
TPU/PLA Bike Chainstay Protector [Designed for Aventon Level 2]
I designed this printable chainstay protector for my Aventon Level 2 e-bike because the bike does not come with one. After just two rides, I noticed that the chain was damaging the paint on the chainstay. The Aventon Level 2 has a very…
- Downloads
- 199
- Likes
- 48
- Rating
- 0
P
PrintablesModel Magic
Iconic Movie Moments - Ghostbusters - Stay Puft Man Attacks - 1984
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 198
- Likes
- 34
- Rating
- 0
P
PrintablesGirak
Caution Honey Bee Stay Clear Sign (Warning)
Comes in two sizes, thick (5 mm) and thin (1.6mm). They consume about 80g and 25g of filament respectively. Obviously the thin version needs to be attached to something rigid. Scale the sign equally in X and Y to get the size you desire.
- Downloads
- 183
- Likes
- 35
- Rating
- 0
P
Printablesdbackbassfan
Shade for Mainstays Floor Lamp
This is a replacement lamp shade for the Walmart “Mainstays” brand floor lamp. My kids and pets kept knocking over our lamp, leading to the original plastic lamp shade cracking and breaking. This is a drop-in replacement for the original.…
- Downloads
- 182
- Likes
- 17
- Rating
- 5
P
PrintablesPawelR
Stay Pawsitive – Cute Cat Keychain (Kawaii Style)
This is a cute cat keychain with the phrase “Stay Pawsitive” – a fun little reminder to stay positive! Perfect as a gift or just to brighten up your keys, backpack, or zipper pull. ✅ Designed for easy one-color printing. 🎨 You can pause…
- Downloads
- 176
- Likes
- 14
- Rating
- 5
P
PrintablesSchaefermakes
Collar Stays
I recommend using scaling in prusaslicer to match the needed size of your dress shirt if the provided size doesn't quite work. Ironing can be used to give a smooth surface if desired.
- Downloads
- 166
- Likes
- 44
- Rating
- 5
P
PrintablesAndrew Armstrong
Motorhome Door Catch/Stays and Base
These different styles of catches and the corresponding base to hold all your motorhome, campervan and caravan lockers open!
- Downloads
- 166
- Likes
- 20
- Rating
- 0
P
PrintablesKarlIRL
Collar Stays for Dress Shirt
Collar stays for shirt collars. Shirt sizes vary so you may need to adjust the length in the step file.
- Downloads
- 164
- Likes
- 20
- Rating
- 5
P
Printablesoriddlero
Death Star 3d Printer Control Knob Star Wars Knob Upgrade - STAY ON TARGET!
For all you Star Wars fans out there, here's a nice clean & classy simple death Star replacement knob for your 3D printer. Unlike other theme-knobs, the death star looks great printed in gray, as-is (no need for intricate painted details…
- Downloads
- 161
- Likes
- 46
- Rating
- 4.5
P
PrintablesDave
Opel corsa c bonnet stay clip.
Opel corsa c bonnet stay clip. Printed in abs. 20% infill. Print with supports. 37 minute print. To edit the step file. Edit the step file in solid edge. Open as an iso metric part. Go to options - units - length and click the drop down…
- Downloads
- 159
- Likes
- 16
- Rating
- 5
P
Printablesoublue
Chest/Trunk Lid Stay
Lid stay for chests or trunks. Designed originally for a pirate chest build as seen in the pictures. Designed to use two #6 wood screws for each side. The stay on the right automatically locks when fully open, holding the lid from closing…
- Downloads
- 157
- Likes
- 19
- Rating
- 5
P
PrintablesMooMooBunnylips
Handle Repair for Flexible Round Laundry Hamper (Mainstays)
Repair for handles of the following (cheap) laundry baskets (available at Walmart).: https://www.walmart.com/ip/Mainstays-Flexible-Round-Laundry-Hamper-White/17126957 (note: Not an affiliate link) While the above baskets suit my needs…
- Downloads
- 144
- Likes
- 20
- Rating
- 0
P
Printablesraymanengland
Atomstack A5 Pro+ Laser Engraver Feet Stays / Mounts
A set of feet, to hold your Atomstack A5 Pro+ laser engraver to a sacrificial base board. The inner gap to slide the feet are 3mm wide, so they should fit other engravers or objects with a similar size. My laser engraver has a kind of…
- Downloads
- 144
- Likes
- 19
- Rating
- 0
P
Printablesremington
Adjustable Window Stay
Quick set of unrefined models for a window stay. The need: to allow casement windows to open to an adjustable maximum gap to stop cats falling out of windows. The solution: A hinged frame mounting point attached to the window by 3m tape…
- Downloads
- 138
- Likes
- 24
- Rating
- 5
P
Printablesnours
Shirt collar stay/stick 50/60.2 and 70mm
Hello like everyone else I regularly lose these small essential parts which ensure my shirts' collar remaining in the correct place. I've designed theses collar sticks/stays in 3 standard lengths with a 1mm thickness : 50mm /1.96 inch…
- Downloads
- 133
- Likes
- 55
- Rating
- 0
P
PrintablesEssEff Studios
Mini Stay Puft Marshmallow - No head
HasLab Proton Pack that was released in January of 2023 came with 3 mini Stay Puft Marshmallows and 6 swappable heads. In order to display all 6, I needed 3 more bodies. I used the model from Nanotech76 to start with. I removed both the…
- Downloads
- 132
- Likes
- 12
- Rating
- 0
P
Printablesppaukstelis
Microscope keychain - stay 'Curious'
Just a slight customization of this cool key chain ornament. Print instructions Licence: Creative Commons - Attribution Category: Learning
- Downloads
- 125
- Likes
- 7
- Rating
- 0
P
Printablescarlascreashuns
Collar Stays
Print new collar stays. Hold the shirt collar in place beautifully.
- Downloads
- 115
- Likes
- 113
- Rating
- 5
P
PrintablesTillin9
MGN12 Rail (Voron) AB Belt Installation Helper/ Stay Clamp
I recently decided to try out some alternative hotends for my Voron 2.4. Most needed a different carriage and removing the X carriage resulted in a fair amount of time retightening and retuning my belts. While there are already belt…
- Downloads
- 114
- Likes
- 16
- Rating
- 5
P
PrintablesRichie Rich
AMS, EASY PRINT..STAY ON BED AND DON'T MOVE.... Y - Splitter, the best out there PC4-UM2 or 10mm ends
connect multi AMS smoother and less issue than the bambu 4 way hub, Easy to Print, It prints without falling of plate and DOES NOT mover while printing to give you a high quality print that fit and works.. UPDATE: after printing make sure…
- Downloads
- 111
- Likes
- 14
- Rating
- 4
P
Printablesdolphinboy
Collar Stays
It's annoying when you loose one of them and have not a replacement... It's a pretty easy and fast part to print so now I don't worry about loosing one anymore ;) Category: Accessories
- Downloads
- 109
- Likes
- 25
- Rating
- 5
P
Printableskwfredeen
Collar Stay
3/8 x 2.5 inch Collar Stay I designed when all of mine gradually disappeared. Since it's 3D printed, remember to remove these before washing.
- Downloads
- 109
- Likes
- 23
- Rating
- 5
P
PrintablesThe3Dprinting
#StayAtHome Diorama - Heroes not included
Hi, this is my small contribution to Wekster's mini's and a small token of my appreciation for all those Heroes on the front line helping and taking care of us. Thank you! Print instructions Instructions for printing available here:…
- Downloads
- 109
- Likes
- 18
- Rating
- 0
P
Printablesjeepers01
Small Picture Frame with hinged rear stay
Small Picture Frame with hinged rear stay Visible picture area 73mm W x 95mm H (2.88" x 3.73") Rear stay hinge leg is print in place (hinge will work after printing) then stuck on to back plate. I used Bostik which makes a strong bond to…
- Downloads
- 109
- Likes
- 13
- Rating
- 0
P
Printablesseasonwarez
Stay Puft Marshmallow Man – Ghostbusters
A fun and iconic 3D-printable figure of the Stay Puft Marshmallow Man, inspired by his epic rampage through New York in the original Ghostbusters movie. This model captures the soft, smiling menace in all his marshmallowy glory — perfect…
- Downloads
- 105
- Likes
- 14
- Rating
- 0
P
Printablesmr.sigma
pumkin twisty fidget, HAPPY HALLOWEEN STAY SPOOKY!
needs supports fun fidget
- Downloads
- 102
- Likes
- 12
- Rating
- 0
P
PrintablesSV SYA
Flag system sailboat backstay
I wanted a way in which I could attach my flag to my backstay. There are numerous ways of doing so but I wanted a solution in which I could easily take down the flag. Its basicly two pulley with a 4mm flagline inbetween. I have adjusted…
- Downloads
- 102
- Likes
- 30
- Rating
- 0
P
PrintablesShoyu
Deckard Cain Stay a While and Listen Sign
Friend wanted a sign for his house in the likes of those, "Stay awhile" welcome signs but wanted to pay homage to our good ole days of countless hours hearing ole Deckard Cain's iconic, "Stay a while and listen." line he constantly said…
- Downloads
- 101
- Likes
- 22
- Rating
- 5
P
Printables_ucas
Shimano Shark Fin Bike Chainstay Deflector/Protector- Deore XT DF-M730
A semi-faithful reproduction of Shimano's iconic Shark Fin, which “keeps the chain from jamming between the tire and chainstay” according to the original packaging. Attach to your bike using zip ties and/or double-sided tape. Please note…
- Downloads
- 97
- Likes
- 19
- Rating
- 5
P
Printablesjatin
HSW Multimeter Holder v2 - "Always Ready" Remix (Cables Stay Plugged In)
This is a remix of the excellent "Multimeter holder for HSW" by Kudeiro. While the original model fits the multimeter perfectly, I found it inconvenient to have to unplug the probes from the bottom ports every time I wanted to dock the…
- Downloads
- 94
- Likes
- 14
- Rating
- 5
P
PrintablesBoA
Towball cover - harder to remove to stay on after carwash
Towball standard ball cover, but it takes some force to take it off, so this should stay on during automatic car wash. Printed in hard TPU (55D), no supports
- Downloads
- 94
- Likes
- 7
- Rating
- 3
P
PrintablesMaker Mike
Window Latch (Casement Stay)
Designed this window latch for the kids cubby house. You can hold the window open at different positions using the holes along the arm. Used two M5 25mm hex head bolts for the pivots. Secured to the window and frame with: one 39mm M4…
- Downloads
- 94
- Likes
- 18
- Rating
- 5
P
Printablesbsurfn99
Shirt Collar Stay / Collar Tab
Another Collar Stay, a little extra thickness and a nice angle that is to the point. Category: Accessories
- Downloads
- 93
- Likes
- 8
- Rating
- 5
P
PrintablesDrop 3D
SunStay - Beach Towel Holder
Keep your towel in place and enjoy the sun without interruptions! With the SunStay Beach Towel Holder, you can ensure your towel stays firm and flat on the sand, even on windy days. Designed with sturdy and easy-to-use anchors, this towel…
- Downloads
- 91
- Likes
- 35
- Rating
- 0
P
Printablesbraga3dprint
Shower Curtain Stay-Put Clip
Don't let your shower curtain fall again! Keep it secure with the Shower Curtain Stay-Put Clip. Made to be easy to print without needing supports, this handy clip is sure to make your shower experience smoother and stress-free. If you…
- Downloads
- 89
- Likes
- 38
- Rating
- 0
P
PrintablesAndiW
chainstay protector Trek Remedy TPU
Chainstay protector that perfectly fits the contours of the Trek Remedy. Might fit other frames like the older Slash too but i haven't tested. I had problems with the chain damaging the frame on the inside of the chainstays. This solves…
- Downloads
- 84
- Likes
- 30
- Rating
- 5
P
Printablesmausausdruck1
chainstays protection with cable routing
Print with TPU
- Downloads
- 81
- Likes
- 26
- Rating
- 5
P
PrintablesJTheAce
Piano/Keyboard Stay for Folding Stand - Roland FP-30X
This print clips onto a standard 1.2 inch (30.5mm) diameter keyboard stand tube to help stabilize keyboards that are too narrow to reach the rubber end caps. The tall piece on the top (13mm X 20mm) fits into the slot of a Roland FP-30X.…
- Downloads
- 81
- Likes
- 14
- Rating
- 5
P
PrintablesMichalizer
9mm Dummy Round with flex pad for training that stays in the barrel
As stated in the file name - this dummy is modified so that it will not be ejected by the extractor when inserted into the chamber. This makes it possible to manipulate the slide and practice triggering without having to search the ground…
- Downloads
- 81
- Likes
- 13
- Rating
- 0
P
PrintablesMinims
Petsafe Staywell Series 300, 400, 500 Door replacement
Door replacement for Petsafe Staywell Séries 300, 400, 500. Print in clear PETG 70% infill. Category: Pets
- Downloads
- 80
- Likes
- 10
- Rating
- 0
P
PrintablesJosh
Stay Puft Marshmallow Pendant
This is Stay Puft. One of the scariest figures to ever make into the movies :) I designed this guy in Fusion 360. He is small so you will have to enlarge him to meet your needs. I was hoping to print him out already but the printers are…
- Downloads
- 80
- Likes
- 15
- Rating
- 0
P
Printablescalvindi
TPU cable organizer (stays on for everyday use)
As long as it's printed slowly it should form a clean round knob to pull through the holes in the strap.
- Downloads
- 78
- Likes
- 44
- Rating
- 0
P
Printablesbearded_hog
Bicyle fender (mudguard) stay mount SKS ESC 3.5mm / 4mm
Each mount needs one 10mm M3 screw and a matching M3x5.7 threaded insert. To mount one fender, print one model that fits the diameter of your fender stay (3.5mm and 4mm are provided) and it's mirrored copy.
- Downloads
- 77
- Likes
- 16
- Rating
- 0
P
PrintablesPrime Tower Designs
Stay Puft Poop Emoji Man
Don't tell my wife about this.
- Downloads
- 76
- Likes
- 11
- Rating
- 5
P
PrintablesLaz3r
collar stay
A little print I ran on my mpselect mini V2 to make some collar stiffs. I sliced this in Prusaslicer using 5 perimeters and, no top and bottom layers, and honeycomb infill at 20%. Happy printing.
- Downloads
- 76
- Likes
- 7
- Rating
- 5
P
PrintablesAlcide
Stay-Online Buddy for Microsoft Teams
Introducing the Stay-Online Buddy, your personal assistant for those never-ending Teams meetings! This nifty 3D-printed gadget is designed to keep you active in the virtual office by pressing the Enter key at regular intervals. Whether…
- Downloads
- 74
- Likes
- 4
- Rating
- 0
P
PrintablesTomZoy
Shirt Collar Stay - Jeff Banks
shirt collar stay for Jeff Banks shirts (which seems to be narrower than standard)
- Downloads
- 73
- Likes
- 15
- Rating
- 5
P
Printableswildegrond
Integrated Gardena Hose Connector with Clip – Always Stay Attached!
This is a simple but effective clip that connects two Gardena hose connectors – keeping your hoses joined and your setup organized. What makes it unique? It includes a loop for attaching a string or zip tie , so you can secure it to your…
- Downloads
- 72
- Likes
- 11
- Rating
- 0
P
PrintablesVoid to Solid
Casement Window Stay / Restrictor (Snap-Together Design)
A 3D-printable casement window stay (restrictor) that holds the window in a slightly open position for ventilation while preventing full opening. The design requires no additional bolts, pins, or fasteners for assembly — all parts snap…
- Downloads
- 72
- Likes
- 9
- Rating
- 0
P
PrintablesDM4DS
Insulated cup can holder - double wall design to stay cool - different logos
Life-size double-wall insulated cup! fits standard cans and keeps them cool! Printed mine without support, the nubsies on the lid worked for me no problem without support. try it. Aldo on the lower part the fasten open/close slot. no…
- Downloads
- 71
- Likes
- 15
- Rating
- 0
P
Printablesthiebes
Yoga mat stay ring
Pretty simple. It's a ring that keeps your yoga mat rolled up. 135 mm inner diameter.
- Downloads
- 70
- Likes
- 6
- Rating
- 0
P
PrintablesModel Magic
Stay Alive - Countess Elizabeth Bathory (Maria Kalinina) - 2006
Stay Alive - Countess Elizabeth Bathory (Maria Kalinina) - 2006 3D printable model.
- Downloads
- 68
- Likes
- 17
- Rating
- 0
P
PrintablesTadTadd
Simple stay-open hinges for Original Prusa Enclosure
Unless your printer is perfectly level, the doors may start to swing shut when you have opened them. This modification keeps the doors wide open by the simple expedient of adding a small bevel on the bearing surfaces of the door hinge and…
- Downloads
- 66
- Likes
- 23
- Rating
- 5
P
PrintablesMatthew Perkins
TPU Bike Chainstay Protector with attachment straps
Was wanting a simple chainstay protector i could print in TPU. I liked some of the models out there, but most used zip ties to attach. I thought instead i'd do a complete 3d printed model, with a elastic attachment that could be cut to…
- Downloads
- 65
- Likes
- 9
- Rating
- 5
P
PrintablesBeyondSaveloyDip
The LegionStay - A Lenovo LegionGo / Logitech MX Keys Mini Dock/Stand
The LegionStay When I bought the LegionGo I didn't anticipate wanting it to become a tiny laptop. But things change, and here we are. This is designed to slide in/out your LegionGo, but to keep the Logitech MX Keys Mini in at all times.…
- Downloads
- 64
- Likes
- 8
- Rating
- 0
P
PrintablesBecker Thorne
WHAT HAPPENS IN THE DUNGEON STAYS IN THE DUNGEON!, sign
WHAT HAPPENS IN THE DUNGEON STAYS IN THE DUNGEON!, sign Category: Signs & Logos
- Downloads
- 63
- Likes
- 17
- Rating
- 5
P
Printablescjs
WHAT HAPPENS IN THE DUNGEON STAYS IN THE DUNGEON
This is a simple remix that splits the original sign into separate parts so it is easier to print in color. The back/base is one part, and the top message, sword, dice, and bottom message are separate parts. The split is on a layer…
- Downloads
- 62
- Likes
- 14
- Rating
- 5
P
Printablesknickers
2004 Subaru Forester Bonnet Stay Clip (printable)
A printer friendly version of pimaster's 2004 Subaru Forester Bonnet Stay Clip Category: Automotive
- Downloads
- 60
- Likes
- 9
- Rating
- 0
P
PrintablesAnefecious
StayPut Outlet Insert
Experience a hassle-free solution for older outlets with the specially designed U-shaped insert. This accessory ensures a snug and secure connection for your devices, eliminating the frustration of loose fittings or accidental slips. Say…
- Downloads
- 60
- Likes
- 4
- Rating
- 0
P
PrintablesHalfwitTomfoolery
Shirt Collar Stay
Collar stays (for searchability, they're sometimes called "picks", "shirt picks", "collar picks", etc.) for dress shirts. The little things that slide into the small pockets in dress shirt collars to keep them flat. Sure, you can buy…
- Downloads
- 59
- Likes
- 7
- Rating
- 0
P
PrintablesDave
Opel corsa c alternative bonnet stay housing.
Bonnet stay housing. Alternative location for inserting the bonnet stay when in a restricted height zone - underground parking with pipes etc in the way. Printed in Tpu95a with supports. 20% infill. 43 minute print.
- Downloads
- 58
- Likes
- 5
- Rating
- 0
P
PrintablesJ.P.
Filamentclip with locking mechanism to stay on the spool even when printing
I have tested some but not all filament clips and was not really satisfied with any of them, each could do one but not the other. I wanted a clip that would stay firmly on the filament spool and not be an obstacle when unwinding the…
- Downloads
- 56
- Likes
- 13
- Rating
- 0
P
PrintablesModel Magic
Stay Alive - October Bantum - 2006
Stay Alive - October Bantum (Sophia Bush) - 2006 3D printable model.
- Downloads
- 55
- Likes
- 13
- Rating
- 0
P
PrintablesFreizeittechnik
Tamiya DT-01 -- Front damper stay (including body mount)
This is my printable replacement for the front damper stay on the Tamiya DT-01, labeled as the front body mount in the manual, as it includes that. I currently believe there to be only one variant, unlike the rear body mount, as used on…
- Downloads
- 54
- Likes
- 6
- Rating
- 0
P
PrintablesBully
Mainstays Standing Fan Base
Based on reviews, it seems this fan has this issue a lot. The opening is a little large, so there is a little wobble. It seems fixable by drilling a hole in the side and threading a screw to tighten it. Been working so far for me, but…
- Downloads
- 52
- Likes
- 3
- Rating
- 0
P
PrintablesGerbilForge
Stay Cozy Book Tent – Minimalist Book Stand & Drink Holder
Designed to hold your book open at the right page while also featuring a notch for your favorite drink, this minimalist stand brings comfort and practicality together. With its sleek, simple design and the engraved phrase "Stay Cozy" ,…
- Downloads
- 50
- Likes
- 8
- Rating
- 0
P
PrintablesModel Magic
Stay Alive - Abigail - 2006
Stay Alive - Abigail (Samaire Armstrong) - 2006 3D printable model.
- Downloads
- 49
- Likes
- 10
- Rating
- 0