Counting matching models…
This is a mounting plate that fits into the Jung LS 990 system. The fingerprint sensor R502-F (waterproof) can be inserted from behind and fixed with the clamp. The connection should be positioned downwards. The whole fits onto the Jung…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
I designed the electronics case for the Arduino fingerprint reader project in order to facilitate conducting experiments and ease of connection, verification and modification, and not for final use by the user in order to facilitate…
Print approx. €6.04–€7.39 excl. taxPreliminary estimate for one variant
This is a simple and clean universal phone stand with 2 different viewing angles for smartphones with an fingerprint reader at the bottom. Fit's for example the IPhone SE. This is a remix of this original model:…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
The housing is for the OpenKNX Fingerprint PCB. https://github.com/OpenKNX/OAM-Fingerprint/tree/main https://knx-user-forum.de/forum/projektforen/openknx/1954741-openknx-fingerprint The two parts can be printed easily, with the flat side…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
I designed this mount so I can have my Windows 11 fingerprint scanner attached to the underside of my desk. The previous scanner I had was smaller and hot gluing it to the underside of my desk worked fine. This new scanner, which works…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Most of the time, I use my laptop with a separate keyboard and mouse and the laptop tucked away in a corner of my desk, with the lid closed. I recently bought a Kensington USB fingerprint reader, and while it works great it's awkward to…
I was inspired to try create a 3D-printed representation of a fingerprint. Part of my goal was to represent it as a finger pressing out from the art so that I could touch that finger. Recommended Print Settings Perimeters 3
Had a rectangular Cable Matters USB extension cable around that I wanted to work with the model
This is a remix of Wowe’s Nuki Keypad 2.0 Cover , modified to remove the button covers while retaining the rest of the design. I made this version because I still wanted to see the numbers on the buttons and be able to insert a pin…
I had TPU in mind when designing this, a thin flexible layer between a coffee pot or beer mug and the desk's surface, just to shield off direct contact. A height of 1 mm works fine with TPU, change the Z-resolution in the slicer if you…
Desk mount for USB Fingerprint reader - Chipsailing CS9711 / WA28. It fits a very popular USB fingerprint sensor from Amazon/AliExpress. I mounted mine under the desk and it allows me to login on the docked laptop when its is closed. This…
Enclosure for OHS Authentication Node, R503 Fingerprint Sensor, and RFID Reader This enclosure is designed to house all the components needed to arm and disarm your Open Home Security (OHS) alarm system using either a fingerprint or an…
A sleek, compact box to secure your electronics project. This model is designed specifically for a secure press-fit of the AS608 optical fingerprint sensor and provides internal space for a small microcontroller, like an ESP32/ESP8266…
Did a resize and cropped out the bottom to fit my outdoor fingerprint sensor (67x144mm). Printed with PETG for better temperature stability. Remixed via OpenSCAD.
3D pointer to help your office colleagues to point in your screen without using their fingers... It will keep your screen free from fingerprints :)
Small fingerprint button. If making a multicolor change take into account that the “fingertip” component constitutes the last layers, and is 0.2mm high.
This is a holder/base for a Kensington VeriMark USB Fingerprint Reader and a UGreen USB 3.0 Extension cable . There is a "desktop" version of the VeriMark, but it's more than twice the price of the regular version at present ($75 vs $37;…
read software and other configurations on github: https://github.com/zimengxiong/tinytouch uses a seeedino XIAO form factor board with an ZW101 fingerprint sensor
Quite easy to print. I made it from ABS. Holes for the cables should be drilled in the back wall. There is enough space inside for any electronics.
The model is still under construction!
A wall mount for the Ekey Uno Fingerprint I designed. The door lock can be bought on amazon:…
x2 usb 2.0 breakout, x1 usb fingerprint sensor, x1 usb to usb c adapter, x1 Apple usb c DAC. The fingerprint sensor is easier to reach if the pc is on the desk top. Also Apple's cheap usb c DAC have great audio and the ADC is way better…
Fingerprint sensor box for gate or door opening for outdoor use consists of 2 parts, the cover is locked at the top, the bottom is locked by an M3x10 allen screw
Cofre para ser usado principalmente con el Freenove ESP32-S3, pero puede introducirse cualquier otro de menor tamaño, por ejemplo ESP32 30 pin o D1 Mini. El fingerprint usado es el basado en chip AS608 como el FMP10A. También se puede…
I needed a triangular fingerprint key for my EDF meter so I modeled one.
Dos piezas simétricas, cada una con forma de media huella dactilar grabada en relieve. Cuando se juntan, forman un solo corazón perfecto , como si fueran almas gemelas o partes complementarias. Cada mitad puede: funcionar como llavero…
It's hard to find a USB Fingerprint reader that also works with Linux. What I realized is that most fingerprint readers natively use the USB 2.0 protocol, and so was the case with the Framework fingerprint sensors. Because of frameworks…
Ich habe das Modell lediglich in PLA gedruckt und es hat sich im heißen Sand nicht verformt. Ich habe Gittersupport verwendet. Nach etwa 3cm Druckhöhe habe ich den Druck pausiert und den Support entfernt. Da kommt man noch sehr gut dran,…
This is a remix of “Ulefone Armor 9 Cradle (angled)” https://www.thingiverse.com/thing:4752444 modified to make the fingerprint sensor accessible and possible to insert/remove the smartphone without unplugging the USB cable.
Model of Fingerprint sensor FPM10A called also DY50. Useful for projects in Fusion306. Housing made with this model https://www.printables.com/model/1149569-fpm10a-dy50-fingerprint-sensor-housing-wall-mount Category: Electronics
Housing for FPM10A called also DY50 to easily fix to wall / door etc. Top cover is snap in. Holes for screws and cables. Upper part is closed to keep light inside. My first version was open from the top and light shined to the door.…
I have no intention of using the fingerprint reader on a refurbished L390 I purchased. As such, blocking it physically seems like a good idea to prevent it rubbing against my wrist during normal usage. So this printed out, plus some black…
I made this prop for a local film production. This design is made to accommodate backlighting LEDs for a realistic effect. I split the body for faster printing and no supports. Assembly: Glue the top to the upper part of the middle one.…
My ekey uno is installed outdoors without a roof, so I often had to clean the sensor due to rain and street dust to make it work properly. To solve this, I designed this cover. This protects the fingerprint sensor from water and dust,…
Has your mounting plate broken, or do you just need extras? The model consists of two parts, one backplate, and one spring clip that is glued to the backplate. This is to print the pring clip in the proper orientation. By slicing the…
This is version 2 of a remix of “Ulefone Armor 9 Cradle (angled)” https://www.thingiverse.com/thing:4752444 modified to make the fingerprint sensor accessible and possible to insert/remove the smartphone without unplugging the USB cable.…
Ghost fingerprints straight from Phasmophobia, including the special Obake handprint! Important Printing Tips: Filament: I printed these using glow-in-the-dark PETG (the type that absorbs light and glows on its own, NOT the fluorescent…
This is a selfmade doorbell with smart camera and fingerprint sensor. The camera is a Eufy Doorbell 2K and the Fingerprint sensor an Ekey S-Line. It consists of a printed case in the dimensions of four flush mounted outlets. Therefore the…
The keypad on these pistol safes makes a very loud beeping sound for any input. When my toddler discovered the buttons I decided to cover up the keypad. This has a secondary benefit of acting as a guide for the finger using the…
I designed this model to be a slip-on/slip-off cover for the Siedle fingerprint reader for unlocking the front door (Haustür). In the summer the reader can get too hot when exposed to direct sunlight for long periods and not read your…
Components and Materials Needed: Electronics: JM-201 Fingerprint Scanner YM-2765 Servo Motor Arduino Nano Microcontroller Buzzer (for entry tone) Push Button (for exit functionality) 3D-Printed Parts: Front Plate (for the fingerprint…
Compatible with fingerprint sensors for/from: Lenovo Thinkpad T14 P14s T15(gen1/gen2) P15s L14 L15 P15 L13 Yoga T15g T15p P15v P1 Gen2 X13 P/N:SF30R65604 SF30R65623 SF30R65603 SF30R65624 The sensor is cheap, widely available, fast and…
Read original design for more details and software and other configurations on github: https://github.com/zimengxiong/tinytouch
This allows you to use a smaller hole in your door than the one required by Teeho. This adapter plate slips between the outside keypad and the door. It will fit snug with no adjustments needed. You will also need to print the adapter…
Our Kronos fingerprint sensors would often become detached due to the bezel design. This is a suitable replacement
A case for mounting the Sparkfun Fingerprint Scanner outdoors - https://www.sparkfun.com/products/11792 Check out my IoT Garage Monitor Opener Project here:…
Unterlage für USB Fingerprintsensor. Sorgt für einen besseren Stand des Sensors. Passend für die Modelle welche man auf AliExpress und Amazon findet.
Material: TPU or PETG Druckereinstellung: Layerhöhe 0,16 mm / Infill 100 % / No Support Montiert mit doppelseitigem Klebeband / Mounted with double-sided adhesive tape. Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and…
Please slide the cover forward when reading with the sensor. The model's measurements are in the pictrues.
Get a Grip on Perfection with The Fingerprint! Tired of fumbling with tiny stencils while airbrushing or painting? Wish you had a third hand for those intricate details? Say goodbye to messy mishaps and hello to precision with The…
Hi everyone, This is a custom mount/cover designed to easily attach the Kensington VeriMark™ Desktop Fingerprint Key under a desk or onto any flat surface using double-sided tape. The cover features a cutout for the cable, a slide-to-lock…
Dos piezas simétricas, cada una con forma de media huella dactilar grabada en relieve. Cuando se juntan, forman un solo corazón perfecto , como si fueran almas gemelas o partes complementarias. Cada mitad puede: funcionar como llavero…
Get a Grip on Perfection with The Fingerprint! Tired of fumbling with tiny stencils while airbrushing or painting? Wish you had a third hand for those intricate details? Say goodbye to messy mishaps and hello to precision with The…
Has your mounting plate broken, or do you just need extras? The model consists of two parts, one backplate, and one spring clip that is glued to the backplate. This is to print the pring clip in the proper orientation. By slicing the…
Had a rectangular Cable Matters USB extension cable around that I wanted to work with the model
The keypad on these pistol safes makes a very loud beeping sound for any input. When my toddler discovered the buttons I decided to cover up the keypad. This has a secondary benefit of acting as a guide for the finger using the…
