Counting matching models…
Collection of mud flaps for the front and back of the 3DSets Landy. Overview Logo 4x4 Mountain. LandR. Logo. **** Printed with PLA and 0.25 nozzle, color change at 0.65.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
printing instructions print in TPU for best results print with PLA supports on print bed why this exists i desighned this cable because i tried inumirable cable tidying prints and not a single one solved the basic requirment of keeping…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
If you have the Prusa Advanced Filtration installed with the Filter Adapter by Das-Werkshopz (https://www.printables.com/@Rwyla_311695) and you like the Flaps by Miroslav Černý (https://www.printables.com/@MiroslavCerny_37372) , you can…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix: https://www.thingiverse.com/thing:4394842 Mud guard for the front and back of the 3DSets Landy. Logo land rover
Holders for 4.5 inch flap disks or cut off wheels with a 7/8ths arbor. The taller model is 4 inches tall, which should fit in most medium height toolbox drawers. It has its full circumference up one half-inch before the cutouts for…
CZ: Klapka má vnější průměr 97 mm a lze tedy vsadit do trubky s vnitřním průměrem 100 mm. 3 mm slouží jako rezerva pro možnost nanesení tmelu či silikonu na obvod klapky. Klapka má držák pro možnost přidání zátěže (např. šroub), díky…
Držák serva křidélek pro RC model větroňe
CZ: Klapka má vnější průměr 122 mm a lze tedy vsadit do trubky s vnitřním průměrem 125 mm. 3 mm slouží jako rezerva pro možnost nanesení tmelu či silikonu na obvod klapky. Klapka má držák pro možnost přidání zátěže (např. šroub), díky…
The model is redrawled according to the movie Laputa: Castle in the Sky. All printed parts PLA and coloring Acryl MattFarbe.
Modular drill attachment that uses replaceable strips of sand paper. Parametric, open-source, free. Made in ShapeScript . Parts: Bolt Washer Nut Sandpaper Printing Filament: Anything rigid Infill: 15%+ Walls: 3+ Seam: Random position…
Replacement of a broken flap. This is used to cover the entrance of the filtration at the outdoor swimming pool. Original piece was broken and I needed to make a replacement. Dimensions: 156 mm x 122 mm x 18 mm Model needs to be printed…
Check list for small children as flaps. You need: 4mm rod or dowel (hinge) magnets 10mm diameter 0.5mm thick (self-adhesive) 4 screws per flap board to screw them on
english Mud flaps Simple mud flap for bicycles. Mounted on the mudguard under the bracket that attaches the mudguard to the axle. This only works if such a bracket is available. My myvelo-Rio has such a bracket. For other bikes with such…
Fully compatible with Denver3D 's compact split flap set up. This requires JST-SM female headers: https://www.amazon.com/dp/B0CNT164CD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 (are the ones i used). Instructions: Crimp on 3 female headers…
4-Kantschlüssel für Wartungsklappe (Side-length is 7,4mm)
For some reason, I'm the only one having a folio on my reMarkable Move that is hard to open. The magnet flappy bit sticks very VERY good to the folio. And because of work I have short nails so it's rather hard to open the folio with the…
non-return flap for dust container
A fully printed cat flap for interior doors between 38 and 42 mm thick. Cut a 165 × 165 mm square opening into the door, push the two frame halves in from both sides, tighten four M5 screws, done. The flap swings freely ±90° on two 608…
Parts I editted for flap counter secondary-gear-single-edit.stl The original gear does not catch My edit has two teeth, but only one tooth catches every spin support-base-edit.stl: Support base for both metarial, weight Matches well with…
------------> ENGLISH <------------ You can't glue any of the plastics of the Twizy. That's the way it is! Take it for granted. That's why ALL my spare parts for the Twizy are screwed. This is a remix. Some minor improvements: Added hole…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — I commissioned UniQrint to create this beautiful little mascot for me. I wanted a cute little magpie (gazzaladra is…
I didn’t like the stock TCA flap lever — it lacks the normal A320 “lift to move” action, which led to accidental position changes. So I designed a replacement flap lever with a proper pull-to-move mechanism and tactile detents. It feels…
The small top hinge tab on the Samsung refrigerator mullion flap (the flipper that seals between the two French doors) often breaks over time, leaving the flap loose or unable to open and close properly. This 3D-printed replacement piece…
This design improves and adapts the attached original models to my needs — hopefully, it will be useful for you too 🙂 Improvements 1) Simplified It is now fully 3D printed. Most parts are designed to be tight push fits. Can be assembled…
The front and rear fenders are the same, and the rear mud flap is unchanged from the original. The front mudflap is cut away to make room for the bend in the X7 rails. If mounted on X10, flat or other rails, you can use the rear mudflap…
Will help to keep more temperature at chamber. Flaps automaticaly open when fans are turning (printing PLA and other materials). Printed with PCblend at 0.2mm layer, PETG will work as well. Use four M3 screws to mount into the printer.
Glue the two parts together and replace the old one with the new one.
Core One Exhaust Vent Flaps (Gravity-Closing) This is a remix of an existing Core One exhaust vent flap design (found here) , using a dryer-style gravity flap mechanism to help retain chamber heat when the exhaust fans are off. The flaps…
non-return flap for dust container
Balance the pancakes and don’t let them fall! See who can make the tallest stack, just make sure it doesn’t all come crashing down! How to play: The first player rolls the die and places the corresponding object it lands on onto the…
A quick and dirty replacement for the Acorn Risc PC's front flap spring anchor. Printed in PETG for strength.
My first ever first hand made model, to replace a broken flap for the milk jug. Couldn't find one pre-made anywhere. Created in Fusion. I printed in PLA on a Bambu P1S with standard PLA settings, nothing tweaked. Hope this is of use to…
Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only
THIS IS A CLEAN VERSION WITH NO WRITTING ON FLAPS. Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only
Printed out of PETG filament with a 0.15mm profile. Be careful to wait until the bed is cool, the flaps are fragile. I modified this model from Printables: https://www.printables.com/model/1169222-prusa-core-one-flaps . I didn't have the…
Recommended Print Settings: 0.2 mm Layer Height 3 Perimeters with 0.4 nozzle 2 Perimeters with 0.6 nozzle 15%+ Infill 5 Toplayer NO Supports Required PETG or Higher Temp Material
Videos of the Sherp show some equipped with mud flaps running all along the sides and extending to the rear. Sides are not needed and wouldn't be easy to connect to the Lurker but rear extension may help limiting water splashes to enter…
This model is compatible with the lego system.
To be sure there no bee anymore in the upper part of your hive. Need to be fixed by screw on dedicated plate to split colony and permit to have upper hive part without bee. Let it in place half a day, and it's good to collect honey. A…
I could not find the Rotary Damper on the Market or only for high prices. So I created this part myself. Additional material: What you need is an O-ring with 8 mm and 1,5 mm thickness as well as silicone oil. I used a viscosity of 30000…
This is replacement Bubba Trailblazer lid flap. I printed it with Sunlu PLA with 100% infill. If you heat the plastic with warm water you can then bend the legs around the metal pegs. It does not sit perfectly flat or latch but works fine…
Flapper for vent cover they seem to be always made from thin filmsy plastic that falls off within a year. This print fit
Replacement flap for the one that stops all the dust falling out of the canister if you hang it up without emptying it (don't do that.) After mine fell out one too many times while emptying (thankfully always recovered), I decided to…
These were made for a Saab 9-3 TTiD 2011 to keep the freshly painted fenders from getting ruined right away. I don't know exactly which model years they fit, but they fit at least these latest manufactured model years. These aren't…
This USB port dust cover thing is very useful to maintain those USB slots free of dust. Large removal flap for PC case back ports, where fingers may encounter several obstacles if flap is too short.
Each arm (temple) of the XREAL Air 2 has two speaker openings, for a total of four outlets across the device. Remixed to accommodate the top speaker opening on each ear. To mirror the STL file for the other ear, import it into a 3D slicer…
A lot of vehicles out there have the issue with the seatbelts (especially the rears) flapping and clapping against the plastic trim or the seat when the windows are open and they are unbuckled. This model was designed for my 2026 Ford…
After years of use, my Dreame L10S ultra lost its vacuum valve (or flap? not sure what's the proper name here) on the back, which I assume is there to help with maintaining a good vacuum while cleaning. For this reason I tried to look…
First of all, a big thank you to ShelbyCob for the excellently designed top cover. This top cover is my favorite of all, the front flap locks into two positions, and the fit to the printer is perfect. With other top covers, you have to…
I used a PVC pipe that's a half inch around and spray painted it black. I also made sure Flapjack can still come of the staff.
I wanted some mud flaps for my ND2 MX-5 and Mazda wanted $300 for an unpainted pair. Where there's a will (spite), there's a way (3D printer + Fusion360). These use the existing three push clips in the wheel well. Just use a flathead…
Flap for the Azuro skimmer with a float and an anti-break stopper . For assembly, one small spring from a standard ballpoint pen is required, which is inserted into the hole in the flap.
Sureflap lokcing knob prongs keept breaking so I redesigned knob to have m3 bolt going through and locking nut with washers on backside. Requires dissasembly of flap to install but should be a lot stronger Have to print with supports.…
Here's a flap valve-gated, WS7040-powered CPAP blower for precise and powerful parts cooling! The WS7040 electronics are integrated right in the model, and the flap valve uses a Creality Ender 3 stepper motor that you might already have…
I was adding a gang box to a wall for CAT6 and, while trying to install the box into the wall the locking flap on the box somehow came loose and fell into the wall. I was unable to retrieve it so I printed a replacement. Printed in PETG…
Rückstauklappe Feder oder Badlüfterklappe Federung oder fan backflow flap bathroom you can scale it in the slicer... Print Settings Infill: 100% Category: Replacement Parts
Design to recreate the stepped and gated functionality of the Airbus A320 Flaps lever. Design objective was to create a realistic feel, with a smooth, solid and weighty action. The design therefore includes steel and brass shafts plus an…
Mud flaps for Tamiya Land Rover Defender 90. I used an old bicycle tube and cutted it with my printed templates. You need some tiny screws (i used M1.4x5mm) and double sided adhesive tape for the mount. Front mud flaps follow soon
For storage of 4 inch or 4-1/2 inch angle grinder discs in 5.5 inch tall (or taller) drawers. Printing: No supports needed. This can be printed in a wide variety of materials. Recommended Materials: DURAMIC 3D PLA Plus Revision Log: Rev0…
This part should also fit for other Suzuki models such as the Jimny and possibly Wagon R+ related cars (i.e. Vauxhaull/Opel Agila) of the same era. For any broken off flap mount points, one can use small screws of similar diameter, set…
Version with flaps. I've printed that one with Fibrology filaflex D30 so can push big plugs with out destroying material integrity like it would happen with PETG/ABS. Window is only 9.55mm toll so peeking right flexible material is crucial.
Original credit to the original design of Ross Barlow from www.flapmodster.com and the post of belinconu in https://www.thingiverse.com/thing:4916198, which was the files that i'ved used, this is a remix of the flaps detents for Honeycomb…
Renault Clio II. / Thalia ventillation system one of the gear usually breaks. This is a replacement gear. Need some voltage reduction to not breake the 3D printed gear.
Horse trailer flap for playmobil 5223. Printed with .6mm Nozzle
This simple model was designed as a flip-up flap that blocks a motion-activated light switch for my printer cabinet lights. Flipping the flap up and down triggers the sensor, turning the lights on and off, rather than waving my hand in…
Swirl flaps removal plugs for BMW M57 diesel engine, 22mm. You'll need 6 of these + orings. Make sure to use high temperature resistant material like Nylon. Original orings should work fine, I used a bit bigger ones though. Designed with…
The Split Flap Assembly Tool is your ultimate companion for building individual split flaps with ease and precision. This tool is designed to streamline the flap construction process, allowing for perfect alignment and quick assembly,…
Tips are appreciated and go towards creating new designs Flapwheels are pretty neat. Depending on the grit they can remove material fast, or finish a surface quickly. They can be used on irregular shapes, curves, holes and other places…
I needed a vibration g-shock, but wanted it more to look like the classic square. This remix has no flaps.
Introduction This project is a reimagining of the tremendous work done by Scottbez in their Splitflap project (V2). None of this would be remotely possible without their efforts, so be sure to give them some love (including Scott's Etsy…
I remixed this brilliant design and the technical implemenation under following preconditions: - Simplification - Print more and buy less - all my modules for my Flight Simulator Homecockpit should be totally self-sufficient and stable,…
Fits YT Izzo 2021+ size M and L, probably also other frame sizes. Use double sided tape with a thickness of 0,6mm (e.g. 3M 4646F or GHP060GF) to attach it to the seat tube. edit: I've added a V2 version, which is a bit wider.
This is a different style of headband for Monster Made 's Halloween Bat Headband . You'll need to go to the original model page for the actual bat, though. Design features and notes This headband has more gentle curves and built-in…
The Global 5500/6500 Airplanes have no clearance between the Flaps and the Lav Service door when open. If the flaps are lowered while the Lav service door is open the flap and door will be damaged. This is why i made this warning that…
The coin return flaps on many 90's coin doors were made from plastic and the tabs that hold them in place like to break, so here's a drop-in replacement. If yours looks like this, then it'll work like butter. Will not necessarily work…
Splitflap spools can be difficult to assemble when using 3d printed flaps. The tips of the cards are very fragile and can break when trying to bend the cards into place. This tool is designed so you can place the spool in the center, add…
Parts I editted for flap counter secondary-gear-single-edit.stl The original gear does not catch My edit has two teeth, but only one tooth catches every spin support-base-edit.stl: Support base for both metarial, weight Matches well with…
My cats hate having to push the cat flap open because of the chance of losing their tale so I printed a simple swivel opener. It just requires some double sided tape and you're good! I have found if the double-sided tape faces the sun, it…
Dryer vent flapper, included Autocad IPT file to resize as needed. Hole in top uses filament or other wire for the pivot point.
Rear mud flaps for FMS FJ40, their latest big-scale (more 1/7th than the advertised 1/10th) ... TPU of course. Sildes onto the rear body rod. 23-09 : added new mudflaps, 2 short, 2 long, each either plain or with "Land Cruiser" text. All…
Reinforcement parts for a Peugeot 407 heater flap. As used in this video The steel spine is not shown here as it is not 3D printed but easy to make elsewhere. The parts were printed from PETG 5 perimeters with 50% infill to give as much…
Here is everything i used to make my splitflap, some of the files have been modified to make the 52 flaps work.
PETG printed mudflaps l+r for Ford Mustang Gen6. You can attach the logo pony in any color of your choice. My model was a mid 2019 EU GT.
Spacers for an acrylic window with a cat flap in it. Uses this cat flap . The window templates are available in the downloads. The acrylic windows were bought from cut my plastic . 13/11/24 V2: Increased the thickness of the spacers from…
After some years I decided to upgrade my Split-Flap Display up to 16 digits. Notes I printed the parts with 0.6 nozzle and Prusament PLA Galaxy Black. The flaps were printed with Das Filament PLA Black and White and 0.4 nozzle. No changes…
PETG works best. 2-3 Layers, least infill is good.
"Chop" token replacement for Flapjacks & Sasquatches. Sturdier, more thematic and easier to pick up than the thin cardboard chits the game comes with. Print settings don't matter too much. I ran these off at 0.2mm layer height and they…
