1,023 models
Use the standard FLSun v400 standard 0.2mm CURA profile with: Wall Line Count = 1 Build Plate Adhesion Type = None PLA G-code file included for the V400 printer. It takes under 8 minutes to print at 25mm/s first layer speed. You can…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
This SVG file goes with mcpea's 3D model of the printer made for PrusaSlicer, which although excellent was missing a proper build plate texture. More exactly, this file replaces the black build plate texture with the big white FLSUN logo…
Print approx. €3.29–€4.03 excl. taxPreliminary estimate for one variant
This design uses the FLSUN SR printer itself to print the parts. Each panel for the enclosure is held on using 10x3mm round magnets as well as m3 screws and m3 T-nuts. The 6 panels are standard 12x12 inch sheets with 1/16 inch width.…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
This is a fan cover for the FLSUN v400 that is a bit further from the fan (+4mm) and should reduce a bit of the noise. Modified the file to add more structural support to the side-pins and also added a few more slots to enhance airflow.…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Thought it might be good to have perforated upper plate risers for the V400 for better ventilation. I wrote a little OpenSCAD file to create lines of cylinders as hole punches, and used Microsoft's free 3D Builder to edit the original STL…
Print approx. €3.68–€4.50 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a secure way to mount the sensor with stock hardware, sine the other mounts for the Super Racer were just integrated or dependent upon custom effectors and hot ends. I also didn't want to make any permanent changes to the…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Soutien câble pour la FLSUN SR pour l'extrudeur Bondtech GLX avec des ventilateurs 5015. il y à un passage pour mettre un collier il faut mettre un écrou carré livré avec le Bondtech dans le logement prévu à cet effet dans le GLX, sur le…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Fixation pour maintenir la DRY box SUNLU sur la FLSUN SR, même ouverte. Ce servir du sabot pour repérer le trou de 2.5mm a faire sur la dry box et mettre un vis de M3*20
Print approx. €1.90–€2.33 excl. taxPreliminary estimate for PETGSource material: PET
This Projet is WORK IN PROGRESS If you like this project, take a moment to buy me a virtual coffee … To install the texture and printer silhoutte in PrusaSlicer, go to: Settings → Printer Settings → General → Bed shape → “Set…” Load the…
UPDATED profiles for OrcaSlicer 1.9 and up. ( Download the slicer here ) Sharing some 0.4 and 0.6 profiles for the Flsun V400 using OrcaSlicer. Files are for Vanilla Klipper or Flsun Klipper (only difference is the Start and End gcodes).…
Improved FLSUN V400 Fanduct Note: Fans are glued to stock fanduct but they can be peeled off easily with a cutter blade. Edit 05/11/22: New Fanduct allowing an overhang of up to 70/75° to be achieved
1 Setup The FLSun SuperRacer is not official supported in the PrusaSlicer software. So we need add our own printer or use a similar to start with. Let's go! 1.1 Initial printer setup We start the PrusaSlicer and then from the…
Printing instructions: Quality: .12 Walls: 3 Infill: 40 Pattern: Grid Temp: 210 and 60 Speed: 80 print speed and 40 walls No support Raft - Optional Link to the video: Note: I didn't make this model, just uploading it here, since it's…
Updated 1/25/23 I have programmed better cura profiles for the FLSun V400 printer. i am currently needing beta testers to help tweak the default parameters of these profiles Please stay up to date on changes and updates at the GitHub…
HOW TO INSTALL PROFILES NEW UPDATE 22.11.25 Petg-hs profile added. NEW UPDATE V1.5.1 19/08-25 - First layer fan turned off, Gcode for bed mesh profile have been added NEW UPDATE V1.5.3 26.09.25 - Changes to support settings, Zhop and…
this is an upgrade to a very nice display holder that i use these build extends the original design and offer a different display mount because i wanted something slimmer that wont engulf the hole screen. this model is fully incorporated…
Adjustable Spool Holder for FLSUN V400. No support needed. Necessary : - 4 x M3x20 - 4 x 608ZZ Ball Bearings - Glue
this is a v2 for my previous design Flsun v400 Speeder Pad Display Holder Upgrade after v1 these are the new features to the new design: more robust holding less material better cooling : spacers in the back of the screen more air way…
Created from raw in Solidworks with Air flow simulation test included. Inlet airflow is not affected, but also improved. Silencer has inside some chambers that broke the sound signal, just like exhaust silencers. Reduce intake sound,…
You will need : 6 screws M3x15mm Double-sided tape or Glue PTFE Tube 9cm
Bracket for mounting the v400's screen/speederpad at the top of the printer. Hooks into the vent holes underneath the logo, and pressure from the screen when inserted helps keep the mount rigid against the top of the printer. These should…
Improved fan duct flsun super racer (the probe can fit)
Enclosure for FLSUN V400. You will need: - 2 polycarbonate panels 403x790x1.5mm (thickness up to 2mm but I used 1.5mm easier to bend) - 16 CHC M3x10mm screws -16 M3 stop nuts Door at this link :…
I made this for the NeedItMakeIt fan duct contest and it won! It's a lightweight high performance fan duct for the FLSUN T1. This was a first attempt at a fan duct (for a printer that I don't even own lol) so I'm pleased with the results.…
Cut version printable on the V400 or other small printer You will need : 10 CHC screws M3x10 10 stop nuts M3 10 washers M3 There are two versions, one with logo and one without. PLA Eryone Glow in the dark ASA Winkle Black
This is a print that fits over the original metal spool holder and locks in place to allow it to hold thicker spools. This fits the FLSUN Delta printers. I had the opportunity to pick one of these printers up at a good price. I wanted to…
A single-piece, easy-to-print, holder to mount the speeder pad to the extruded rail of the printer. Pro Tip: Route the cables through the device so it's a little bit cleaner.
Pour calibrer la première couche de la Flsun V400 de façon uniforme.
Camera holder, bracket for FLSUN V400 v3
So here's a config bundle. This bundle includes all the profiles ive made specifically for my stock FLSun V400. It also includes the V400 printer configs as well. The Profiles ive made included some layer heights from 0.1 up to 0.3 layer…
ADXL345 Mount for FLSUN V400. A longer screw is needed to fix it.
Print with PLA, no support, i printed it with 4 walls. The Gripper is not perfect but holds tight.
HOW TO INSTALL PROFILES The file includes a 0.12, a 0.16 and a 0.2 layer hight profile. It have been working great for me and have just made some new tweeks and uploaded the newest version (v2.1) New V.3.3 with PETG, PLA+ and SILK -…
Flsun Super Racer SR Feets for more stability 🦾 The model is at the exact same height as the original feets but you can increase or decrease the height easily in you slicer. Printed in TPU 82A and used in this video: Remixed from:…
FLSUN V400 FYSETC Portable Input Shaper Mount A longer screw is needed to fix it.
New version Fan Duct for FLSUN SR tested and approved with Pack Volcano MAX form hotends.fr
Printed in PLA. Used brass inserts for the supports and the ADXL holder on the fan cover. The back support includes a cutout for insertion of a cable tie if wanted, may or may not fit your cable ties. I used 3mm bolts for all connections.…
So the v400 is a great machine. Ive printed a lot of stuff on mine. a lot of BIG prints too.. which is my favorite part! Anyhow, one downfall thats common is the start code on them, because it allows your printer to heat up while sitting…
FLSun V400 – Prusa Slicer Quality Profile Hey maker! 👋 A tested PrusaSlicer profile for the FLSun V400, tuned for high-quality PLA prints at 0.2 mm layer height. Features: Based on Cura standard profiles, manually adapted for PrusaSlicer.…
This is a lower profile mount for the v400 speederpad to mount to the chassis rather than on it's (actually really nice) stand. The bare, shaped mount ( V400 Attachment / Mod Starter ) to fit the chassis was by Trayal on Thingiverse:…
Neopixels Ring Light Support for Delta Printers Need : - Neon Flexible Tube 1m T1616-Side 10mm PCB : https://fr.aliexpress.com/item/1005004872854948.html?spm=a2g0o.productlist.main.35.4a3c779a7j2no7 - LED Strip 1 m 60 IP 30 :…
FLSUN V400 Fanduct for 4010 fans. I recommend this fans (24V Ball 12000RPM) : https://fr.aliexpress.com/item/32798634077.html?spm=a2g0o.order_list.order_list_main.13.21ef5e5b8i2sK2&gatewayAdapt=glo2fra
i have seen a few tool holders for the Flsun v400, i saw 2 different models: https://www.printables.com/model/336836-flsun-v400-tool-caddy https://www.printables.com/model/313252-flsun-v400-toolholder thanks for the ideas i wanted to…
FLSUN V400 Full Enclusure with filter and fan. INTRODUCTION AND DESCRIPTION The idea is create strong hinges system in order to be printed with all materials, and decrease as soon as possible the holes on the glasses especially in hinge…
EDIT 30-01-2023: Added a cover with bigger mesh holes This mesh cover fits in the slots when you use the V400 upper plater risers found here: https://www.printables.com/model/325471-flsun-v400-upper-plate-risers Just press in the cover…
This is a remix of the "Longer camera holder for FLSUN V400 v3" with an added m6 stud for camera mounts.
Updated: Increased overall length and tweaked the mounting holes a little bit to have a tighter fit, still not final yet and more updates to come im sure. Need help indexing your round build plate on your FLsun V400? Try this and let me…
Enclosing Flsun V400 is fairly easy because of the extrusion slots on each pillar. I have designed top/bottom caps for the side walls and now I'm working on the door and hinges. How to build the sides: Print 2x the STL and 2x mirrored…
I redesign the Desingn Maarten Vlug, i change everyting and build a nice smoother design wich looks more “as stock” I design and upload several variants. Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like…
I just designed this to have a nice matching buildplate. It is not in the right scale so not to use for any other things (e.g. enclosure modeling). unfortunately you can't change the colors in the slicer. What is possible is to change the…
UPDATE: i am adding a longer version for wider spools, as i just bought 3djake brand spool and its too wide for the orginal spool holder, so if anyone is using wider spools, use the long version. (cura will throw a message to fix the…
Permet de fermer les trous a la base des colonnes, pour éviter que des chose ne tombe. Fixation avec 2 vis M3x10 et 2 T-nuts. Deux version avec le logo Flsun et l'autre sans. il y a un petit décrochement en bas pour que ca rentre dans la…
This item reduces drastically the noise of the turbo fan, see (and listen) the video: There are 3 levels of noise reduction: Stock silencer “Christmas tree” only: the G-Code of this model is precharged in the memory of the S1. It cuts…
My Orca Slicer profiles can be found in the “ other files ” section. Some model print faster with standard settings. You need to adjust, infill density, support if needed, miniatures has the support settings. Try them if you looking for…
This is a remix of this awesome model : https://www.printables.com/model/375326-flsun-v400-speeder-pad-display-holder-up I replaced filets by chamfers. You can now print without supports :) You can print files separately or directly the…
Simply clip them on the effector, it will withstand accelerations without any glue or screws or wathever. I used gyroïd infill @10% without testing any other pattern or density. Filament is PLA White Matte from Grossiste3D, it gives a…
We designed a camera mount for the FLSUN V400. There is a Version for the left and the right front profile. The mount can be simply clipped on the profile. Printed on the FLSUN V400! Find it in our shop here:…
Hello, Fan duct for flsun super racer no supports!,
Guide for aligning (indexing) your v400's build plate. I printed mine with the following settings: 3 Perimeters 3 Bottom Layers 0 Top Layers (top side of print is hidden once attached) 20% Gyroid Infill No supports Installing: Attaches to…
CAD file of the FLSUN SR effector plate. May not resemble the real part a 100% but comes pretty close, if you want to design accessories. I'm not completely sure about the depth and the diameter of the holes for the ball joints, as I…
⚠ UPDATE ⚠ Following numerous feedbacks, I upgraded the upper and lower shell in a third version (Flsun Speeder Pad V3). In this version the tolerances are softer and reinforcements have been added to make the body more solid.…
Enclosure for FLSUN V400. Due to proximity with the bed you need to print this design in ABS or similar. I made a different design to print it in PLA. You will need: - 2 polycarbonate panels 403x787x1.5mm (thickness up to 2mm but I used…
This is a remake of a FLSUN V400 profile for use on PrusaSlicer. The graphics for the plate is from the @CODASYSGmbH_831285 version that was for the SR but I prefer it to others since it has the squared plate that helps in PrusaSlicer.…
after looking for several models on the internet of webcam holder and finding nothing. I came to the conclusion in modeling one. I printed it with plain PLA in about 70 min with my Flsun v400. I was inspired by this models:…
FLSUN V400 Stock Fan Cover for replacement.
Are you tired of dropping things into the base of your brand new V400 or afraid something might get lost in the opening? This print in place cover snaps securely into the channel at the base of the V400 pillars just below the belt…
Simple Holder for FLSUN V400 Display. Holder has a 10° Slope Just needs: 4x Bolt - DIN 912 M3 x 10 4x Nut - DIN 985 M3 - Nut
FLSUN Super Racer FYSETC Portable Input Shaper Mount. Needed: 2x M3x10mm Screws to fix Portable Input Shaper to the mount 1x M3x10mm Screw to fix support on Super Racer 1x M3 Nut to fix support on Super Racer Configuration for Klipper:…
FLSUN V400 PEI Textur Profil .svg File Install under Configuration > Custom Printer Profile > Print Bed Profile > Texture/Modell Thanks for downloading in advance and please don't forget to like this modell!
This will also work as a general purpose adjustable arm that will mount to any 8mm t-slot extrusion. I recommend printing the bolts with a minimum of 30% infill. 12/12/22: Added filets to mounting plate giving it more support
This is probably the most important printer add-on for your FLSun Super Racer! Are you tired of: Spaghetti prints? Clogged up nozzles? TPU wrapping around extruder gears? Filament running out? No bed adhesion? Superglue bed adhesion?…
Permet de mieux refroidir le filament sans necessité de les pousser à 100%, 70% suffit amplement. Vis (x4) et cylindres (x2) imprimés en 0,12mm d'epaisseur, avec jupes. Les platines en 0,20mm, sans support (mettre à plat sur le plateau,…
Effector plate for the V400 with all the holes. 99% acurate. Also added the pins. Edit: Also added a .stl with physical thread.
With hardware (4 m3x8 SHCS) this solution should weigh roughly 13 grams. I designed it with the attributes of polycarbonate in mind. - I have only printed it in polycarbonate - If you print it in another material please let me know how it…
I design a Electronic Bay Cover with LED Light Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Its a heavy…
Stock CPAP Turbo Fan Silencer
Cable Tidy for FLSUN Super Racer. Just requires 2 cable ties to fix the two parts together.
Flsun Super Racer SR Feets for more stability 🦾 The model is 3 mm high but you can increase or decrease the height easily in you slicer. Used in this video:
Simpel camera mount for cameras with clip mounts. PETG/PLA
Official FLSUN V400 Stock Fanduct for replacement.
An enclosure for the FLSUN v400 printable in ~1.5 hours for all 3 sides. Use what you've got. Don't waste time on 9+ hour prints for an “enclosure.” Zip-ties, heated inserts, glue, it doesn't matter. Take cardboard, plexi-glass, fabric,…
This holder was designed especially for mounting SUNLU FilaDryer S2 on the top of FLSUN V400. This holder is attached to the dryer through standard mounting holes (replace the standard self-tapping screws with longer ones. at the same…
Fan Cover to support BigTreeTech KNOMI. Easy to print, no support needed. Needs: 2x M3x8 or M3x6 screws to fix support to Fan Cover 1x M3x30 to fix Fan Cover to V400 effector with ADXL mount or 1x M3x25 without. The hole to fix the Fan…
This is a remix of the V400 probe holder adding the T nut to fit the unique extrusions in this printer. Remove the top extrusion cover to fit this. You might need to loosen the screws for that extrusion in order to make it fit. This is a…
Permet de fixer le ADXL345 Fysetc comme la sonde de nivellement. Fonctionne pour la V400 et la SR. Prévoir un aimant de 10x20x3mm (moi j'ai simplement coller l'aimant, mais j'ai prévu un trou pour le visser) et 2 vis M3x8 pour fixer…
I haven't seen a good tool holder for the V400, so I though I would build one. This is patterned off of several different models that were floating around for the Super Racer. It's not a remix, as it was built from scratch in SketchUp. I…
I like the original design but there was no tilt in the holder. Added about 10 deg tilt to the holder. Rounded the curves for the brackets that clip on to the V400 frame. Extended the portion of the bracket that has the dovetail receiver…
The original mount relied on a machined effector plate to fit an original e3d hot end, but this resulted in a 4 mm gap between the housing and radiator, when used with stock radiator. Also, I removed the nut pocket for the radiator. It…
Ein Mülleimer der aus 2 Teilen besteht, der Halter an sich und der Sicherungsring für den Müllbeutel. Ich nutze ihn für die ganzen Filament-reste die sich bei vielen drucken ansammeln. Print Settings: PLA 4 Walls 4 Bottom + 4 Top Layers…
Thanks for downloading in advance and please don't forget to like this modell!
Update: under construction! Fixing printspace! Hello dear community, I present you an easy solution to house the chamber of a FLSUN V400 without having to bend the acrylic. All that is required are: • Utility knife or deburrer • 1m…
Thank you all the prevous designers for the good idea. It absolutely makes less noise! The models had some minor mesh errors, I also did not like the text but like smooth walls. Took both the existing ideas and largely rebuilt the thing…
i tried to work with those STL files in Fusion 360 and its next to impossible to work with. i couldn't found any CAD worthy file for the tower mount, only STL. (and if one exist i couldn't locate one) so, i took a paper and copy the exact…
The hotend front cooling fan shroud of the Flsun V400 has always reminded me of an ethnic warrior mask, or a reptilian or grey alien face. And now it's even more obvious! V400 emblem debadged to make room for the eyes. We don't need it as…
Because my printer has a small print bed, I need a smaller base tile. What is the best shape to use? I think a different shape may be better than the original square shape of the tile. After some prints i refuse to use this system bc its…
Bed Level für FLSUN SR (Durchmesser 280 mm) Zu beachten gilt, dass die Datei fast das volle Druckbett verwendet! Bed Level for FLSUN SR (diameter 280 mm) It should be noted that the file uses almost the full print bed!
These macros are designed to enhance the Flsun T1 Pro printing experience by improving temperature handling, automating bed mesh calibration, and providing clear on-screen and console feedback throughout the print process. Changelog:…
Ho creato questi profili utilizzando la versione di Cura 5.2.2 per Flsun V400 ed ho ottenuto ottimi risultati. Ho personalizzato flusso iniziale, flusso secondario, modalita combing disattivata, z-hop, ecc. ho diviso 4 profili: Normale…
There are already a handful of these, but I wanted mine to blend in a little better with the existing parts of the v400. I also wanted a more robust clip so that I could print mine without any top or bottom layers. The '(Shortened)'…
