Counting matching models…
Eine 3D-gedruckte Fliegenklatsche, die vollständig aus PLA (Polylactid) hergestellt wird, ist ein praktisches und umweltfreundliches Werkzeug zur Bekämpfung von Insekten. Sie wird mithilfe eines 3D-Druckers produziert und bietet die…
RC: Flysky Noble NB4 Protector リミックス可能 必要：M3 Bolts 上下取付可能
This is a gimbal and switch protector the the Flysky FS-I6X Transmitter. It clips on where the lanyard would go. It may work with the Flysky FS-I6 but I don't have a transmitter to test it on. If someone prints it for the I6 and it fits…
Battery covers are one of the easiest things to lose, and no one wants to order a new one and wait a couple of days to receive it. Now you can replace your backplate in under 30 minutes! Print Settings: Resolution: .15mm Supports: Yes…
flyswatter | Fliegenklatsche | Falaklatsche | XXXL Griff (PLA): 20% Infill and 4 Outlines Klatsche (TPU): 10% Infill and 3 Outlines
A simple holder to mount a Flysky FS-iA6B Receiver Uses M3 screws
This is a case and insert for the Flysky FS-i6 or FS-i6x. Sized to print on a MK3 or MK4. I glued some foam to the lid of the case and created an insert for the base of the case. The Case The case is a version of…
Holder for ther FlySky 10 Channel Receiver Its created with OpenSCAD so you can change it . Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open the .scad file make any changes you need Use F5 to preview the model or…
Screen Protector Frame for FLYSKY NB4 Test fitted on the NB4+ but should also fit the standard NB4 and the NB4 Pro Uses 2 x M3 countersunk screws to attach the handle end onto the frame. Embedded flysky logo in the frame if you want to do…
3D scanned the Flysky Fs-i6 and created the handles to give it a wider feel. Feels like a Taranasis Qx7 in your hands. No Drilling or Gluing, just snaps in and stays put. https://youtu.be/0_VPp9_kHLE (Originally uploaded to Thingiverse by…
A Spline roller for installation of flyscreening. Requires a single M4*30 bolt and nut. No supports required. Category: Household
Update: Version 3 uploaded. For user request I have added 2 more screws at the arms to base connection, and enforced a little bit the arms. Setting the nuts in the slot for the lower screw will need patient.:) I have not printed this…
Ein neuer clip-in Griff für Fliegengitter. Bei uns für die innenseite. Vielleicht kann es jemand gebrauchen - meine Frau ist wieder happy ;) Ihr benötigt lediglich 2 kleine lange Schrauben Print 0,16mm PLA+ or PETG 100% infill no supports
Set up- Take your normal Elite nerf dart cut the tip of the dart off with scissors then put your new tip on the nerf dart. Shooting- when shooting use a nerf gun that the dart can reach the bottom with the tip still on the gun for example…
The Noble NB4/NB4+ remote is really great, and the movable steering wheel ‘arm’ is nice to allow left and righ-handed driving, as well as going ‘flat’ for easier transport. The only negative I've found is that the wheel arm tends to move…
I fly my drone using the receiver from eachine to receive the 5.8GHz signal video feed. This feed can be directly shown on any smartphone with an OTG USB interface! This design was based on thing: 1415509 and modified to fit a smartphone.…
The 3D-printed model of a fly swatter with a hooking system for the Cooler Master QUBE500 system is a clever solution for insect control and storage. This model features the following: Design and Dimensions: The fly swatter is 29.5 cm…
Recommend use PLA+(i use esun pla+), up to 6 walls, 30% infill. When connecting the two parts, i use superglue. If you want other material… you need adjust z-axis scale.
Fits on 2 sheets of an A1 Mini. You can also use a 3/8" wooden dowel as the stick. The swatter fits a rod that is 9.7mm in diameter. The mesh part of the swatter is designed to be printed in straight lines. Use .2mm layer height so that…
FLYSHT-36 V2.0 has a bigger connector and tweaked things to avoid crushing resistors
Fix your antennas at 90 degrees angle to maximize signal quality and range Parts prints orientation is optimised for print quality, then just use a drop of CA glue to attach the parts and two zip-ties to make sure the antennas never go…
Replacement adapter for FlySky Noble NB4 wheel. Print with support on edges. There is a built in bridge as support for the screw hole, just remove the bridging layer after print.
To make it waterproof. I recommend to add silicone (as example Done Deal) on all adjacent surfaces, and to the wires under the small cap. Use it on your own risk! PS: parts are very stiff to connect. Its important for better waterproof…
Thumb steer to replace the original adapter between your NB4 and the steering wheel. Still updating the design, so please leave comments to help me make improvements. It will add about 3mm width to your NB4, so I use a longer M3 screw for…
I ran into an issue with the original model where the switch covers were attached very thinly due to needing to be bent which made them prone to breaking off. This removes the switch protectors allowing for a stronger part.
Using the Rotor Riot logo to protect your FS-i6 sticks Inspired from http://www.thingiverse.com/thing:2073993 but redrawn from scratch, using logo and joined together with a bridge as I prefer those style designs. It should protect the…
Simple aber effektive Katzenklappe für ein Fliegengitter an der Terassentüre. So kann die Katze im Sommer, wenn die Terassentüre offen ist, problemlos rein und raus, ohne dass das Fliegengitter im Weg ist. Einfach mit PLA drucken und dann…
Thumb wheel for flysky fs-g7p, replaces the whole wheel. Supports are needed.
V2 バージョン Separate Type RC:Flysky Noble NB4 Gopro マウント 2ファイルを別々に印刷が良い mount_V2-2は八角形、mount_V2-3は丸、どちらも取付可能 あなたの使いやすい物を選択して下さい。 1-base レイヤー: 0.2mm インフィル: 50% サポート: No 2&3-mount レイヤー: 0.2mm インフィル: 100% サポート: 必要： M5 nut, M3 bolt
It's a screen protector for the NB4 from Flysky. I did that to make sure the screen stays safe in my bag during transportation. It slides easily on top. I kept a space between the protection and the screen to avoid any risk of scratching.…
Recently purchased the NB4-radio and really liking it. A pack of features, easy adjustable, … given the reasonable price. However I had to get used to the steering wheel which I found rather small … so designed a new one. As I had no foam…
Ein Werkzeug zur Reparatur von Fliegengittern etc. A tool for repairing fly screens etc.
This is a simple holder for a FS-iA6B Radio Receiver. The holder is 49 mm wide, 12 mm in height and 10 mm deep. The mounting holes are 39 mm apart and uses M3 or #4 screws.
Custom insect screen for your yacht's portlights. Keeps bugs out, lets air in, adds privacy, prevents rainwater from pouring in. Potentially also makes it harder for sound to get in and out of your vessel. No need to close portlights when…
I had to change the design a little while swapping the rims around some of them had different offset so i added some different heights
FlySky FS-I6X extension dor Micro TX modul (Crossfire, ExpressLRS, etc) and external battery.
Remixed from magnetik From magnetiks post on thingiverse: "This is a protective sleeve for the Flysky Noble NB4 battery sled. I made this to protect the aluminum from getting dinged up. It's a tight fit due to the little nibs that lock…
This has been designed to allow the user to use any 12mm hex wheels to control steering inputs to the car. Personally I found the stock wheel slightly too small, this adaptor allowed me to use a 1/10 foam tire which is slightly larger.…
You will need these components: M3x30 Screw *2 M3 Nut *2 M6x12 Bolt *1 M6 Nut *1 Setup: Insert the M6 nut to the slot and tighten the M6 bolt. Then insert the joint to the rod of the frame. then insert the joint part 2 and insert M3…
Remix of a model from makerworld, for those who have smaller hands and have to reach for the thumb grip.
When I printed geekyjeremys screen protector I noticed it was a bit short for my liking, I used that file to create a protector with the same shape but a little longer. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Repair for the Hamstra flyscreen I recently broke the “catcher” of the flyscreen. The flyscreen wasn't be able to stay down. With this replacement you are easily be able to fix the flyscreen. This particular one i made is the one with the…
Nice project, but little tricki to print at once. Look at screenshot, how to set on bed and set supports. Locking pin - when you put it inside and turn 90deg - its locked and dont fall of. Printed from PLA, on bambu X1, 0.2mm layer, with…
A slightly modified version of NathanMichaelMoore's gimbal protector to strengthen the part
So after some years the throttle lever of my Turnigy GTX3 broke. I modeled the broken part, and changed the lever design. This design gives me much more control over throttle and brake. I printed the part from PETG, 0.1 mm layer height…
remix of: https://www.printables.com/de/model/463220-voron-cw2-stealthburner-ebb-sb2240-pg7-umbilical-m thanks for the initial work! to fit plug: https://aliexpress.com/item/4001153106923.html and wire harness of one mellow Fly-SB2040…
A remix of a perfect model makes it an even better fit, making sure that it can fit. All credit for the sleek aesthetic and 99% of the design goes to benbojangles: https://www.thingiverse.com/benbojangles/designs There are two versions.…
V1 Version (Separate type V2~ Upload later) RC:Flysky Noble NB4 Gopro mount small size layer: 0.16mm infill: 100% support: no
A remix that has a gap for the wires so it can be panel mounted
Here is a minimal Gopromount for Flysky Gt5 Radio's I've printed in TPU
I wanted to have a different steering wheel on my turnigy gtx3, so i came up with a quick sketch to mount a m-chassis wheel with 12mm hex to the transmitter. I like the size of the m-chassis wheel better than an standard touring car tyre.…
This is a remix of jag's "Parametric Flyswatter" ( https://www.thingiverse.com/thing:9927 ). I just fixed the bug that the corners were not rounded properly when creating rectangular fly swatters instead of quadratic ones. Also fixed a…
Flyscreen Frame, Corner Stake & Straight Connector Stake Category: Household
V5 of the Gimbal Guard is the one you should be printing, I've uploaded the other versions to show the iterative process I went through. V1 worked, but was terrible to remove, and was mainly to confirm my measurements. V2 was nice to…
Stick propector for your FlySkyi6 or FlySkyi6X
Lipo battery tray for FS-GT3B transmitter Material: PAL/PETG Supports : Yes Infill: 20-25% Compatible with the following Lipo 11.1V battery or similar size https://www.amazon.com/dp/B07L6BNTDV?psc=1&ref=ppx_yo2ov_dt_b_product_details
Flyswatter i designed in Fusion360 and use myself. Handle was printed in PLA and Sheet was printed in TPU
This is an antenna modification for the Fsi6x that is suitable for the Fsi6 as well. With this design you will replace the stock antenna and you will not have to drill any holes in the radio. I printed as it is with supports and infill of…
Print in PETG using any QUALITY or STRUCTURAL profile.
Recomended material: a - Flex 90SH / PETG b - PLA/PETG c - Flex 90SH / PETG
This model is a replacement for the reverse/brake side of the trigger on the FlySky Noble NB4/NB4+ radio. I accidentally broke the Medium size, and then the Small size broke on me unexpectedly. There is definitely a weak spot in the…
This is a remix form another model. Here I only uploaded the moditications done. You should go to the original part and take the misssing files. Based on this design ( https://www.thingiverse.com/thing:1607446 ) I made a new top part to…
This is a simple case for the Flysky 2.4GHz 6CH FS-X6B Receiver which does not come with a case. So is not very protected. Printed in ABS 0.4mm nozzle 0.3 layer height. May need a bit of a clean up around the cutouts depending on how your…
guiding Blade for Flysky FS-i6 if you convert to drive RC Cars with
Because I didn't find a gimbal protection for the FS-i6S i designed one by myself. Therefore I used the screw of the mobile/tablet mount that came with the radio but a normal M6 screw is also possible. Works pretty well. It holds the…
FlySky i6 gimbal protector There are several i6 gimbal protectors on thingiverse, but none of them protect the switches too. Prints best with supports and 30% infill for strength Print Settings Printer Brand: Prusa Printer: Prusa Mk2…
Remixed from orcoconut Removed the handle as I found it cumbersome when using the touchscreen. Didn't have any countersunk M3s, so I used 2 M3x10 instead. Isn't completely flush but works without stressing the print. Scaled the print to…
The power switch on the Flysky fs-i6x transmitter is a terrible design. It sits flush with the control face and is a smooth, chromed plastic finish. This means that if your thumbs are ever damp (or very dry) it is almost impossible to…
Seitz Window Blind Flyscreen Retaining Clip SP1044 Caravan. Fix your caravan or motorhome blinds quickly and affordably! This 3D printed clip replaces the often-broken Seitz/Dometic part (SP104409/SP1044) and restores smooth blind…
I re-designed RepRaptor's industrial steam valve to replace the knobs "VRA"and "VRB" on a FlySky FSi6 RC transmitter. This provides a nice nostalgic reference to the transmitter when controlling live steam locomotives. Print Settings…
A small tool for tightening the cap nuts that hold in the switches on the FlySky i6 / i6x radio control. Handy when they come loose, or when you want to add your own custom stickers underneath. A plastic tool won't last forever, but it…
Main aim FlySky FS-GT2B battery cover replacement is now usable as holder for remote control on your neck. It's comfortably solution knowns from more expensive remote controls. Notes I disclaim all liability for damage to your remote…
I designed simple shelf mount for my TX and connect cable for a simulator. The diameter of the holes is 5 mm. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0,2 Infill: 80% How I Designed This…
Holder for the FlySky FS-GT3C Transmitter. You can screw it at a side wall or at the top wall to let your control hang down. Print Settings Printer: Cetus3D Rafts: No Supports: Yes Resolution: 0.3 mm Infill: 20 % Category: R/C Vehicles
This is, as far as possible, a faithful re-creation of the battery cover for a FlySky FS-i6 / FS-i6X transmitter. Print settings used: - Filament - Creality Hyper PLA - Printed with the text facing upwards - 0.1mm layer height - 3 walls -…
Handwheel replacement with tire tread texture for some additional grip may also work with FS-GT3C model Material : TPU Supports: No Infill: 5-10 %
Flyswatter, two sizes. With holder. Part-A is from Gembird Flex filament. Other parts are PLA. Individual parts connected by riveting using a filament and a soldering iron.
I added a lid to the original design for better sealing
Plácačka na mouchy v provedení MAXI. Part-A je z Flex filamentu Gembird. Na fotkách je vidět jak špatně se tiskne na Enderu 3 :D Ale ve výsledku můžu říct, že přesně tak jsem to chtěl :D. ostatní díly jsou PLA. Jednotlivé části spojené…
Longer version of the neck balancer for FS-i6 transmitter with larger hole.
Dies ist ein Gopro Mount für die Flysky GT5, hier müsst ihr die Antenne gegen den Halter tauschen
printed without supports Petg 0.2 layers
self‑centering add‑on for RC transmitter sticks. Just place it over the throttle stick and secure it with elastic band.
This stick increases grip and precision in movements To install the stick insert an m3 insert into the hole, unscrew the original stick and screw this one
infill: 25% or more layer height: 0.12mm or less
Windshield/flyscreen for Husqvarna Svartpilen 401. Maybe also would fit vitpilen. It mounts using stock speedometer bolts. Also it would need 4 M5 bolts/nuts to mount the flyscreen to the brackets. I was able to print it on Ender3 with…
I have modified my GT3C transmiter and I am no longer using original power button. (Power switch wires are common problem for GT3C users). I have ordered steering wheel for transmiter from Yeah Racing. As expected not a single one could…
Mount for FlySky FS-A6
Always seems like theres nowhere to put the antenna wire when installing different electronics. This fixs that issue.
designed to hold a Flysky FS Sr8 receiver in place
The Enoz Sergeant Swat Flyswatter ( Amazon ) is great but the plastic swatter is a bit brittle and will eventually break, print this in TPU and your swatter is as good as new.
Threaded insert frame for FlySky FS-I6X handles.
Kiddo lost one, an hour with some calipers later... good enough. PLA plays nicer here when removing the supports around the tiny overhangs. Printed @ .15mm, supports everywhere.
Caixa para reduzir o tamanho do FS-IA6B Ideal para quem usa iBus, basta remover os Pins e soldar diretamente na PCB. Category: R/C Vehicles
My kids forced the steering wheel and a part that is connected to the brake disk broke off This is a reinforced version of that disk. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution:…
Covers for FlySky Fs-6x and FlySky FS-i6x style transmitters to protect the gimbals and switches in transport. I've broken enough switches that it was time to get something more suitable for the abuse my gear goes through, getting chucked…
Compatible avec toute radio de protocole AFHDS 2A
Wall holder for a Flysky FS-ST8 radio. Print time is about 1 hr.
FLYSKY FS-TH9X stick guard How I Designed This Fusion 360 Category: R/C Vehicles
