122 models
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
I took a 2x1 CU basic shelf and added the slab with holes and embossed sizing. Print as is no supports.
Print approx. €4.34–€5.31 excl. taxPreliminary estimate for one variant
Gridfinity holder to store your forstner drill bits in. Fits the following sized forstner drill bit sizes: 15mm 20mm 25mm 30mm 35mm Also see my standard drill bit gridfinity holders:…
Festool MFT Bohrschablone mit Stecksystem. Die modularen Stecker sind so gebaut, dass sie sich nicht so schnell verdrehen und somit besser zu positionieren sind. Zusätzlich habe Ich extra eine Bohrerführung (Adapter) designed, damit die…
Is the reach of your drillpress to short, and are you strugeling to get perfectly perpendicular holes in the middle of a sheet of wood? This jig might not take you all the way to perfect hole, but it will at least make it a lot easier to…
These are 1x2 Gridfinity holders for Forstner bits , ranging from 15mm to 35mm. These holders are NOT stackable. (You may put them on top, but not at the bottom) I also included the FreeCAD source files , so you can edit them on your own…
Gridfinity storage for Irwin Imperial Forstner bits. 1 3/8", 1", 7/8", ¾", 5/8", ½", 3/8", ¼" holders Included 3mf file for your editing pleasure Printed using PLA Tolerances are fairly tight - if you are using filament that shrinks take…
Krabička pro Forstnerovy vrtáky Parkside. 20.9.2023 - Opravena chyba na spodním díle. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Since I could not find a bin for my set of 5 Forstner bits (which came in one of that sucking blister packs), I decided to make my own. It had to be as small as possible to fit into my shop toolcart, so I started with an empty bin of…
This is a bin for forstner drillbits, in particular for this set: https://amzn.to/4dtgmuX but it could be used with others. My goal when designing it was: As compact as possible. Stackable. Half pitch. Using as little material as possible…
A Forstner bit holder for handy storage on a wall.
Gridfinity holder to store your forstner drill bits. It is stackable so just use it as base of your gridfinity bits stack. Perfect fit for the following sized forstner drill bit sizes: 15mm 20mm 25mm 30mm 35mm
After using a few strips of gaf tape to hold some forstner bits in the wimpy case they came in, I finally got around to designing a case to hold them. Also, because I really didn't want to have any more heart-attacks of having the bits…
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi there, Here is my remix of Barebaric's gridfinity forstner bit storage, into an insert for the Gridfinity Storage Box by Pred. I…
Verbindungsstück zwischen Kran und Zange Category: Other
Each holder is 3x1, except for the 2" bit, which is 3x2. This Porter-Cable set comes with 14 total bits, including a pair of 1/4" bits, so I've designed a ¼" holder that accommodates both in one, which allows for an even grid layout of…
A compact, wall mounted holder for a complete set of Forstner bits 1/4" through 2" in 1/8" increments (more or less, 13 bits total, no spots for 1 3/4" or 1 7/8"). The holder measures 9.5" in length and presents the bits at a 15º angle…
Co-Ax Reloading Press fits Forster and Bonanza presses storage for the tools needed to work on machine also holds a small oil bottle, no supports needed can print at any print height u like, there are also place to put magnets when done…
Drilling guide for Forstner 12mm and hole up to 35mm. Can be used with “Drilling guide for Forstner 12mm and hole up to 35mm” previously published here. Just glue both tools :) Supports needed for best results.
I designed depth stops for my Forstner bits to reliably drill holes of the same defined depth every time. This is a Fusion file into which you can enter the diameter and height of the sheath, as well as the diameter of the shaft, using…
A universal holder for a complete set of Forstner bits 1/4" through 2" in 1/8" increments (more or less, 13 bits total, no spots for 1 3/4" or 1 7/8"). The holders measures 6.5" in length and presents the bits at a 15º angle for easy…
Model includes text for each size of bit for quick identification.
For 35-30-25-20-15 mm drill bits One hole is 10mm (for 35mm bit) others are 8.5 mm Use 4x50 screws
Das ist ein Regal Einsatz für die Einstiegsmodelle der Trigano Gruppe (Challenger V114, Forster, Chausson, usw.) Damit ist es möglich den Stauraum im Bad deutlich effizienter zu nutzen. Am Besten in PETG oder mit einem anderen…
I have designed a holder for Forsner drill bits for my tool wall. You can fix the holder with a Ø3.5mm screw. Suitable for Ø15 Ø20 Ø25 Ø30 Ø35 I have also made a holder for a step drill as you can see on the picture on the right here the…
impreso en PLA, en capas de 0.3 y un 15% de relleno, tarda 3h aproximadamente. Para imprimir las letras en otro color debe cambiar sólo las 2 ultimas capas
same as original by fumo, thank you for making modifications easy, in particular the scad file!
I could not find a cable door for Filametrix Stealthburner CW2 with ECAS, so i modified the Cable door from BTT
A collection of various bullet puller collet holders for different brands of collets. These are all older versions of collet holders I sell at azjake.com/shop. They all print without supports and with zero post processing.
Printed in PLA .I prefer to print the hooks with 80% infill and support.
Decided to make some holders for my forstner bits in my tool chest. These are as universal as I can think to make them as there is some variation in shaft and shank lengths, but the diameters seem consistent. I based these off of…
Hi this is a remix of Jons vertical drill guide for forstner bits. This remix allows the use of forstner bits with 12mm schaft diameter. The bearing used is a 6001zz. There is not much more to it.
Gridfinity Forstner Bit Organizer 4x5x6 No support needed. Check out my other Gridfinity creations: https://www.printables.com/@NygaardDesign/collections/1741703
This is a bullet for Andew Forseter's Blade Runner Blaster: https://www.myminifactory.com/object/3d-print-deckards-blaster-blade-runner-5694 Each barrel fits 5 bullets.
Wall Mount for Forstner Bit. 15mm - 8mm shaft 20mm - 8mm shaft 25mm - 8mm shaft 30mm - 8mm shaft 35mm - 10mm shaft
Wandaufhänger für Protos Forsthelme.
I bought a 21 piece Forstner bit set from MLCS. I wanted to put it in my under-drill-press storage which uses Dewalt TSTAK drawers, this is the result. It may fit other brands YMMV. The F3D file I used to generate these is included,…
This model is specifically made for “ASDTODW 16-Piece Woodworking Hole Opener Set: Positioning Hard Alloy Flat Wing Drills with Adjustable Hinge Holes, Sizes 15-35Mm". I purchased this cheap set on temu and it seems to cut well enough for…
a simple tray to load primers in the coax seater feed tube
Australian lungfish (Neoceratodus forsteri) . Honestly, I don't know much about the species other than what's in the Wikipedia article, but I do know that over at the California Academy of Sciences they have one that's estimated to have…
Designed to hold 6 Forstner drill bits from 10mm to 35mm. Intended as a pegboard mount. Our pegboard holes are 45mm apart. Model is designed to take M3 brass inserts and use screws as the hooks for the pegboard. I've uploaded the CAD if…
Non-destructively adapt a Forster case trimmer to power. Uses a 1" long 1/4" bit to adapt to your electric drill.
This is a forstner bit guide that helps you to stay vertical while drilling holes for furniture hinges. With big holes to get rid of the chips, vertical stop and changable bearing it is a nice tool to help you build some furniture. I had…
Wall Mount Drill Bit Holders Wandhalterung Bohrer Bosch Forstner ; Forstner Drill Holder (Bosch) – Matching drill set Wandhalterung Bohrer Bosch 0,5 Schritte; Metal Drill Holder (0.5 mm steps, Bosch) – Matching drill set Wandhalterung…
These are some racks I made for storing Forstner bits. I included holes for all the easily available sizes so that if I buy another size it will already have a home. I was being indecisive so I made them with the choice of either legs…
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
Like the overall design. Only change i had to do was the forstner holder.
This box was specificaly designed for Parkside PSB 6 A Forstner drill bits, but any similar size will fit. Size of bits is 15mm - 35mm. 4-point smart Quick lock mechanism ensures super fast closing of the box and secure fit. Print…
This model holds five Forstner drill bits in a compact, rectangular box that fits inside the extra space of a Parkside drill carry case. Bit sizes are 15, 20, 25, 30, and 35mm. Printable without supports by having the three-bit…
Counter Sink Bits holder. I needed easy access to my tools. Printed in black PETG Picture shows direct part was printed Strength 3 wall loops Sparse density infill 20% Support: Type: Tree(auto) Style: Organic Top/bottom Z distance: 28mm
I found this holder from @CosmicNimbus to be perfect for my needs, but I don't have any gridfinity part so I don't need that compatibility. So I simply cut the bottom part to have a flat surface. Faster print and less filament used.
Printed of PLA, 20% infil, 3 perimeters.
A box that holds 5 drill bits with diameters between 15 and 35 mm. The lid is slide-on.
Gridfinity version of the original design.
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
Holder for standard set of Forstner bits, 15, 20, 25, 26, 30 and 35 For 35mm bit hole is 10mm, all other holes 8mm
Eternal search has come to an end. My Forstner bits don't look very new, nor shiny. The more they do their job. 40+ years old. Who does not show some corrosion? Two color print on Prusa MK3 and MMU. Print Settings Printer Brand: Prusa…
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
This block has a recessed spot for the Forster Original Case Trimmer and pilot holes for the included wood screws that come with the case trimmer. There are holes for 8 pilots and 3 collets. The labeled model includes labels for all the…
These are Gridfinity bins for the Irwin 3/8" Forstner drill bit set of Imperial sizes. The set is advertised as "14 sizes" but it's really 13 sizes with the 1/4" bit duplicated (huh?). The fraction labels on my smaller tray didn't turn…
This holder is for a full set of 16 forstner drill bits for 0.25" to 2.125" with 3/8" shanks. Holes for bits are 0.4" diameter. The tape measure graphic on the front edge allows you to choose the right bit size at a glance. Print with two…
Abdeckkappen für Bosch Professional Forstnerbohrer 18mm/20mm Bohrungen in verschiedenen Versionen: 20mm normal: Abdeckkappe OD 20,7mm/0,5mm, Zylinder OD 19,6/wall 2mm Gesamthöhe 5mm 20mm thin: Abdeckkappe OD 20,7mm/0,5mm, Zylinder OD…
I made this to fit CMT 20mm forstner drill bit, as it has a longer shaft.
Holds the 7 bit set from Harbor Freight, the "Warrior" brand. Set includes: 1", 7/8", 3/4", 5/8", 1/2", 3/8" and 1/4". This is the cheapest set of forstner bits Harbor Freight sells (around $10USD as of 2026). I rarely use forstner bits,…
This holder fits Forstner bits of sizes 15mm, 20mm, 25mm, 30mm and 35mm with 90mm length and 10mm sharf diameter each.
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
HSW holder made for a Hilka 5 piece forstner bit set but should fit most standard bits (see size chart in pics) Bits used for modeling: 35mm - 10mm shank 30mm - 8mm shank 25mm - 8mm shank 20mm - 8mm shank 15mm - 8mm shank Sizing between…
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
Printing in vase mode, with a 0.28mm layer. I used PETG.
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
model not only holds bits upside down without bits falling out, but also can be magnetically mounted to any metal surface, even upside down. Double magnets needed for each slot. also 2 M3x16 bolts needed to hold two halves together and on…
Holder for a 7pc set of Freud brand Forstner bits #PB-107B. Fits perfectly in an empty talenti sorbetto container.
Insert for Festool SYS3 S 76 box and Freud Forstner Bits. Includes space for 1/4in all the way to 2in bits.
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
Looking for a reliable and efficient way to store your bullet puller die and other accessories? Check out this custom-designed rack, perfect for anyone needing to keep their tools organized. It's made to hold any 7/8" threaded bullet…
Here is a clean, professional Printables description for your collection of three organizers. It’s optimized for clarity, SEO, and maker appeal. Description The PrecisionRack™ Bit Organizer Series includes three space-saving holders…
Halter für 3mm 4mm 5mm 6 mm 8mm 10mm Forstnerbohrer.
I needed a guide for a 45mm Forstner bit and the hole should be as perpendicular to the plate as possible. So I designed this guide. It fits a Bosch 45mm "Forstner Holzbohrer mit Wellenschliff" Product Number (2608577020) I think it…
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
Model of forstner bits and a cutout case built in Fusion 360, fully parametrized, for use in other projects. This was initially designed as a variant of the rugged box case. The original Rugged Box (Parametric) license is highly…
Holder for Harbor Fright forstner bit set. Inspired by https://www.printables.com/model/103969-forstner-bit-set-holder Category: Tool Holders & Boxes
Print with standard parameters and PLA or any other useful material you want. If you want to strengthen the print: On the backside is a M4 hole for an M4 20mm Screw (see my pictures). The hole for the hook should be 5mm deep with a…
Forstner Drill Bits Holder for Allit EuroPlus Inserts The STL file ForstnerBits35-45 is designed for the Allit EuroPlus Insert 45/4 (108 × 162 × 45 mm), while the remaining STL files fit into the EuroPlus Inserts 45/3 (108 × 108 × 45 mm).
A screwable holder for a 40mm Bosch Forstner Bohrer / Forstner Bit. Category: Tool Holders & Boxes
Custom stop collars for forstner bits, as I needed some precise depth holes in the middle of a large piece of plywood which did not fit under my drill press. I printed them in PLA because that is what was in the printer, and it started to…
Forstner drill holder for euro pegwall with 12,5 hole. Fits up to Ø30mm drills. Prints upside down without support.
The original Gridfinity model was modified to hold Imperial size Forstner Bits. This model was specifically designed for CMT Orange Tool brand but may work with others. The original Fusion 360 file is included as well as STEP file and STL…
Box for 12 Forstner drill bits. Top and bottom held together with magnets. Parametric: To change the box height and for use with other magnets, just change the parameters of the Fusion file. You might have to change the individual drill…
Holder for Lidl Parkside forstner bit set. Low profile, so easy to fit into a tool cabinet drawer. The source file is included, in case you need holder for different size bits.
A simple placard to remind you of the correct speed when using a Forstner bit. Included hard- and softwood settings. Two versions are included; one with screw mounting holes, one without. Each placard is 155x135mm so they can print on…
Holder for this forstner drill bit set https://www.aliexpress.com/item/1005005037492660.html
I recently bought a boxed set of 5 Famag Forstner Bits at the Harrogate Woodworking Show (UK), along with a couple of larger individual sizes. As I was using Gridfinity in the drawers in my workshop, I created this tray to hold all seven…
https://buymeacoffee.com/maggmin
My very first model i designed from scratch myself. Printet with 15 % infill.. you may be abel to use less, i printed mine with 15 % Support: Yes. I used tree support, they easily came off and out of the side holes. You will need 4 of…
