Counting matching models…
Fridge magnets are great but I don't like that most of them put the magnet dangerously close to the finish on that expensive fridge and removing them to put up a new note or change a picture can be a hassle, if your hands are full. This…
This is a 3D printed model of a generic Corvette Class Light Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Phobos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with…
First model ive uploaded, probably the 3rd ive ever made. Not a cad pro, so please forgive me. I based this off a picture from amazon, using eyesight and a bit of maths. Both of which arent so good, so if its a little inaccurate i do…
This is a 3D printed model of a Orion Class Heavy Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Deimos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with torpedos -…
Model from Halo for the UNSC Heavy Frigate ship. Comes with original model, with a pre-split files for a 400mm model.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Refrigerator Can Holder holds 10x 330ml drinks cans (see Print Instructions , below, if your cans are a different size). You put the cans in the front at the top, they roll to the back, drop to the bottom then roll to the front so you can…
This is a really simple print that needs no support. Thanks to input from Printables user faqiu who suggested making a shorter version, I have uploaded two alternative sizes to the original 240mm long model - 200 and 160 mm. I use the…
A fun little fish-shaped refrigerator magnet! The fridge magnet is actually quite strong because it uses (3) 6.4x6.4x2.5mm neodymium-iron-boron (rare-earth) block magnets, which are embedded in the body during printing (shown in the…
This is a replacement for the awful button style water dispenser in some Whirlpool refrigerators. There are two models attached, a “standard” and a “extra." The standard one may not depress the button due to flex in the model based on the…
This is a 3D printed version of the Amun Ra Class STEALTH Frigate from the show the Expanse. The model is not the most accurate but is still not bad. Assembly does not require a single drop of glue as it fits all together like a kit. The…
This model was design for looks and not function. All the parts were printed separately and glued together. I used a stainless steel peel and stick for the body and doors. I did do a lot of sanding and smoothing on the printed parts to…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Use these 1250 names together with “ fridge poetry ” to create some refrigerator messages or poetry: Just print the names with a filament color change, slide in a 8x1mm magnet from the bottom (it sticks without glue) and have fun!…
This can organizer keeps the coldest/oldest drink at the front of the shelf where it is easy to grab. It is broken into six pieces to easily fit on the bed of your printer and can be easily glued together with CA glue. There are holes at…
Print it in PETG for more flexiblity - or TPU if you like.
A nice mini version of my splattered Wiley Coyote refrigerator magnet uses a 5x2 or 6x2mm magnet (there are two versions). Super quick and easy to print requires no supports and minimal infill. Press a mini magnet into the recess (may…
I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 2 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…
A model of the german Sachsen class frigates. I remember doing this one quite well because I started the modelling process after a silvester party at new year 2020 while I was listening to the voice of a drunken friend over teamspeak xD…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I found someone that uploaded the Sword-Class frigate from Warhammer, so I once again, put it through Meshmixer, then fixed some parts using Blender. Category: Vehicles
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
Do you have something to hide and is your roommate afraid of spiders? Then use this knob….. Or just because you like such a knob or spiders. To operate you have to grab the spider by the lower body. Original design. The model I used for…
I entered last competition with Skeleton theme soap dish, so it would be fun to make it as a tradition ! For this competition I modelled in Blender Full body skeleton with 6x3mm magnet connection holes. Had to make small changes to…
Inspiration This is my submission for the April 2025 fridge-themed printables design contest . The contest was my main motive for making this. I used to keep a magnetic whiteboard on my fridge to track needed groceries. But I found I was…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
It is a camel character with the torso of the refrigerator wearing shoes. A cold wind comes out of your mouth. Sometimes it is frozen. Although it is a refrigerator to avoid the heat of the desert, the world is wandering around the world,…
Don't like your groceries list being obscured by huge refrigerator magnets that are to flat to grab them. Maybe give this quick, one coloured print a try and finally get rid of those last 40 cm of your old Prusament Galaxy Silver spool!…
The Salica Frigo refrigerated cargo ship, modelled from scratch. Now I'm not entirely sure why this specific ship is listed as an example of a reefer ship everywhere, but there are abundant schematics for it which made modelling a whole…
The same great Fish Refrigerator Magnet , only smaller! Size decreased by 55%. Cuteness increased by 200%. Magnet consumption reduced by 66%! What's not to love?! Similarly to the original, a print pause is used to insert (1x)…
Wall Socket Refrigerator Magnet with universal hole pattern for 2 to 4 pieces of magnets ⌀4 - 10 mm x height of 2 or 3 mm are uploaded. Please let me know, if you need different holes for your magnets. Support material is only needed…
Tired of the cheap letters you find in stores that are weak and fall off, or made of foam and therefore impossible to properly clean? These letters are designed to be durable and super magnetic, strong enough to hold up paper notes, and…
This adds space for 3.97mm x 3.175mm magnets for Rikkers' Tiger Shark Clip design. The 3mf file is configured to pause for magnet installation. Warning during printing: the magnet can potentially jump up and stick to magnetic material…
Made this Frigo Camello inspired by the game steal a brainrot on tinkercad, Also made Tralalero Tralala and Im in process of doing Los Tralaleritos
refrigerator egg holder for 10eggs compatibile: Grundig GQN 21225 GB size: 241x108x28 mm diameter of the hole: 40mm
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
printed with 0.15 layer height Prusament PLA, Pinapple Yellow, Jet Black and Lipstick Red. Added an extra layer for the red cheeks and made three pockets for magnet size Ø 6x3 mm.
This is my interpretation in Gauge 1 (1:32) of the reefer wagons S-CHVO (later Ibces) operated by the Nederlandse Spoorwegen / Dutch Railways. The S.N.C.F. / French Railways ran very similar wagons type “Ibes” for the “STEF”-company.…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This water filter cap should replace various Whirlpool brand side-by-side refrigerator filter caps. Our cap was missing from the day we moved in, probably left on an old filter. It was always a pain to grab hold of the filter to remove it…
A simple model that can become a multi-color print on any 3D printer by executing filament hot swaps mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and then…
This is my own design. It is heavily inspired by the High Republic Longbeam , with elements from sailing frigates (i.e. fore-, main- and mizzenmast, cannons, bowsprit). I imagine this ship to be about twice as long as a Longbeam. Assuming…
Tired of wasted vertical space in your fridge? This stackable organizer box helps you make the most of every shelf. Design highlights: Split into two print-friendly parts — no supports required Optional stacking connector — print only…
A drip pan designed for the in-door water/ice dispenser of some Whirlpool refrigerators. Certain models place the water dispenser so close to the front, it ends up dripping down the door. This tray catches those drips. A sleeve for a…
Mini refrigerator based on the Haier Model. Printed using PLA withe and silver. On the doors I used a metallic self-adhesive paper. For the interior shelves I used acrylic sheet to give a glass effect. Please feel free to comment to help…
This model is styled as a module of a real frigate ship, has a very simple design, and is also suitable for 3D printing. This model is intended for decorative or imaginative play purposes only . It is not suitable for contact with food,…
It's a jetpack for dummy 13, what more do you want???
I looked around and could not find a solution that met my needs so I hacked this together. I tried to use a couple other designs and even tried modifying them. In the end I just made a solution. This was printed on a x1c in draft mode .24…
This device is design for the DM26xx and DM28xx Dometic refrigerator models. I have included the design file so you can modify it to work with your brand/model of refrigerator. Simply install the device to hold the door slightly open.…
What if you and your young kid are alone at home, and you have to cook the dinner, but the kid likes to mess up the whole room while you are in the kitchen? In that case you bring your kid with you to the kitchen, but making a playground…
Base for Philips 2200 Automatic Espresso Machine with LatteGo Should fit the others as well but I haven't tested. Printed on BambuLab P1S at .2mm Layer in Black Elegoo PLA This was 3D scanned and modeled by www.f3dscans.com
This is a bar for Frigidaire FFTR1821 door shelf. Ours broke after 2 years so I design a replacement. It's a bit deeper to reduce the stress on the bar when storing oversized jug (in our case soy sauce). Should fit 30" fridge with the…
I love the original fish magnet from kennyd1gital but I don't have the exact magnet size, so I made this remix for 8x3mm magnets. You can stick a maximum of 3 magnets in, but in my opinion 2 are enough :) Please also give a like to…
Imperial II Frigate For star wars armada. Designed for resin 3D printers, for best result print at 0.05mm with AA2 or 0.02mm no AA. If you like my work and want to support me you can visit my Etsy shop:…
This is yet another Samsung door mullion repair piece. There are a couple designs out there, and this is my attempt. This is the flipper that closes the center door flap on several Samsung refrigerators. It fits quite well, I've installed…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
Update: Added a version with a threaded lid. This is an item that I designed and printed out of necessity, when one of those refrigerator experiments went terribly wrong. After hours of cleaning the leaky mess the remaining aroma was…
This model is for a refrigerator magnet intended to be printed in 2 colors. I've included 2 models; one for an 8mm diameter round magnet and the other for a 10mm diameter round magnet. You can scale the design (X & Y) in the slicer for…
Wargame Ships - Frigate Printer: Prusa Mk3s Material: PLA, PTEG, etc Layer Height: 0.15 mm Infill: 15% Supports: Yes, on tips of sails and bowsprit Brim: None 20-24 -gun Frigate Circa 1812 Not to any particular scale. About 40 mm form…
Designed this to fit a Whirlpool ice maker includes an insert that drops into the tray that can be replaced when stained or dirty. Print the insert on a textured sheet to help hide the water stains.
The source marked this model as adult content.
This ship appeared in Star Wars: The High Republic: Adventures : Part 2 , where it was identified as a republic medical frigate. It could be a Salvation -class medical frigate (from Light of the Jedi ). In-universe, this ship seems to be…
If you have a Samsung refrigerator with a French door, you know there's a little mullion flap between the two sides of the door that slides into place when the door closes to insulate the gap. You may have also at some point accidentally…
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Tanjiro Kamado magnet. Category: 2D Art
For the best result print from PLA Prusament. Printing settings: layer height 0,2mm, 2 perimeters, 10~15% infill, 3 botton and 3 top layers, detect thin walls, detect bridge layers, no supports needed. Clean openings in Basket for Ratchet…
My Mother in Law wanted me to print a can holder for her refrigerator and sent me a file. It was one of those HEX shapes and I printed it. Low and Behold a long print time and a failure. So I said the hell with it and just designed a new…
Combs to reshape the ac fins
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
Ultra-Scary Halloween Pumpkin! Instructions and Assembly: Print with tree supports. Note that the supports inside the mouth are quite difficult to remove; take your time and do it piece by piece, being careful not to damage the teeth. The…
Hold Your RV Fridge Door Open These door holders can be used to prevent your RV refrigerator from getting moldy when your motor home is not in use. Simply turn off your refrigerator as you normally would and insert these door stops…
The door bins that came in our ~20-year-old refrigerator gave out about 15 years ago. Frigidaire wants a whopping $55/ea to replace with an official Frigidaire part. But I am a 3D Printer! This design doesn't quite mimic the appearance of…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a replacement shelf for a Frigidaire 241691311 refrigerator. It goes on the upper section of the door. The shelves that come with this refrigerator are an extremely poor design, and break almost immediately if you put any weight…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
DEMON SLAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Inosuke Hashibira magnet. Category: 2D Art
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Model of a warship inspired the British Enterprise Class Frigates. The model is designed to print in two main parts : Hull Deck – It is a tight fit slotting it into the hull and might need a little sanding around the edges of the deck.
Thanks to @Kemmotar for the excellent design of the original. I made a few different sizes, and decided to put my Ender Extender kit to work. The result is marvelous. 30% Infill was used here, in Cubic Subdivision arrangement. I only did…
It's a jetpack for mini 13, what more do you want???
A nice splattered Wiley Coyote refrigerator magnet (uses two 10 x 3mm magnets). Quick and easy to print requires no supports and minimal infill. Press a couple of 10 x 3mm magnets into the recesses (may need glue) and he's ready for…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Originally modeled in Tinkercad as a replacement for a lost hinge courtesy of my kids…. Printed in PLA, general, defaults are ok, supports recommended for pin. This should slide onto the hook built into the door, however, in my case,…
Synopsis: Refrigerator door stopped closing on its own and eventually the bottom of the shelf thing started scraping the liner at the bottom. Diagnosis revealed that the two-part door closing cam system at the bottom-right door hinge…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I discovered a free-to-use Santa Claus clipart online and converted it into an SVG file using Adobe Illustrator. From there, I designed a multicolored 3D-printable model, specifically for use with a multicolor 3D printer. To assemble:…
Here's my take on those old refrigerator alphabet magnets. These measure about 2" tall and utilize 5mmx2mm round magnets. Each letter has it's own STL so you can batch print in different colors if you need. Here's a link for the magnets…
The door shelves on every Frigidaire refrigerator Ive owned has broken in the same spot in the middle. This model helps fix that problem. Recommend printing with at least 3 walls and 20% infill. I printed in PETG as its a little more…
Divider clips on to the lip of the door shelves in an RV refrigerator to keep things in place. 76mm front to rear clip width is 3.5mm. No supports needed.
Uses 12mm x 2mm magnets. Four layers of manual color change.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
Nothing special. I just made a prototype in PETG. Update- Added a version 2 that allows the barrel section to be modular making the print quicker and cleaner. Also the tabs are offset to very slightly to allow only one direction of…
好吧，我設計了 Dachshund 的所有部分，它是這些的一部分。而且這些都是用磁鐵結合的，快來試試吧~
This is a simple winter cover to put behind the Thetford vent cover as shown in the picture. You can buy these at the store but they are expensive (for some piece of plastic) and mine are foldable and fit perfectly. These are sold as…
Printing instructions: Prints in 2 pieces with a color change for the egg. Use superglue to put it together. Skillet requires supports for the handle (theoretically you can print it upside down and rely on bridging but I don't recommend…
![Skeleton [Refrigerator Magnet]](https://media.printables.com/media/prints/218804/images/1999824_ef024956-fe97-47fa-bc4d-b47d4fc6f789/0f347690-3a88-4947-84ce-f7cb67769895.jpeg)
