Counting matching models…
Intro This is an improved version (V2) of a super fun mini frisbee. Despite its compact size and low weight, it flies smoothly and stably , making it perfect for outdoor play anywhere — park, beach, garden, or on the go. Its lightweight…
Ready for summer! Easy-to-print Frisbee Disc. The Frisbee flies very stably and well through the air. The holes in the Prusament disc make it ideal for short-distance use. The compact build makes it very travel-friendly. The size and good…
AquaFlyer: The Ultimate Floating Mini Frisbee Thank you to PCBWay for reaching out and sponsoring this project:
This project started with a simple idea: make a pocket-sized flying disc that anyone can print instead of buying a new ZipChip every time one gets lost. Version 1 of this project was a very simple test — basically a cylinder with a finger…
Simple Frisbee, maximum size printable on a MK2.5S/MK3
Here is an Ultimate Frisbee I created based off the regulation dimensions provided by the U.S. Ultimate Frisbee Organization. The current model is 100% to scale but obviously can be shrank to fit your print bed! This is the 3rd rendition…
UPDATE: Please see the revised version that prints without supports and has better flight characteristics: https://www.printables.com/model/1305486-best-3d-printed-frisbee-v2…
I tried printing a classic frisbee, but I found out, that the standard edges won't be strong and flexible enough (the layer adhesion is too weak when flexed), so I've adjusted them, so that the frisbee is as flexible as possible without…
Intro This compact mini frisbee is small enough to fit in your backpack or pocket — but don’t let its size fool you! It delivers surprisingly stable flight and lightweight performance, making it a fun outdoor toy for parks, beaches,…
After making some other “airless” models, a commenter on one of my Tik Toks said he wanted to see an airless disc golf disc….it was so absurd that it needed to exist. After some time, this is what I came up with. It isn't perfect but I…
This Ultimate Frisbee Disc Clip works with Discraft and EuroDisc Frisbees. I used a 0.4mm Nozzle and 20% infill. No support needed.
This is a Set of Frisbee Golf Disc's Deigned by Gul. We have a Putter & Crazy Putter We have a Mid-Range We have a Fairway We have a Distance
Das Frisbee ist sehr leicht und hat tolle Flugeigenschaften. Ich habe es so konstruiert, dass es auch von kleineren Kindern leicht geworfen werden kann. Beim Wurf muss die die Seite mit dem Rand (der Erhöhung) nach unten schaue. Somit…
Printed without top an bottom layers and vase mode (I recommend using a 0.8 mm nozzle)
based on the flexi-rex with stronger links, i modelled the jaws based on an official disclip. any infill + wall count is fine, i did mine at 2 walls and lightning infill.
Introducing Halo! Halo is the ring-shaped Frisbee of the future! Stop wasting filament on full-sized frisbees and print Halo! Features: -90% less filament than a full-sized frisbee! -Sleek, futuristic design! Print Settings Printer Brand:…
Model of a frisbee (also called disc) for discgolf. This is a putter, which is easy to throw but does not go very far for beginners :)
Crafted with cutting-edge 3D technology, this innovative Frisbee ditches the traditional design for a sleek, futuristic look. Say goodbye to worries about punctures or deflation, as this Frisbee is engineered without air, ensuring…
Versatility in mounting. Disc golf wall hanger with multiple mounting options. Blended & modified @Steve_133368 & @hineswoodworks (thingiverse) two great designs. Any Material is fine. Can be used with Nail,Screw, or Command Strip.
This is a frisbee, the diameter is approximately 210mm. It is maybe also a toy for you dog. You throw it, and he should catch it, or the other way around :). If you like it, give me a like please.
Frisbee thrower which do not requires assembly and supports. Step file is provided. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Category: Mechanical Toys
This is an improved version of: https://www.printables.com/model/430552-worlds-best-3d-printed-frisbee This frisbee easily flies 100+ feet on a good throw. Prints well and plenty durable with PLA+, PETG or ABS. Never be without an outdoor…
A frisbee flinger is a handheld device designed to launch frisbees with high accuracy and speed. Take your frisbee skill indoors. Instead of hitting trees outside, break valuable stuff inside with the redesigned, recalibrated, recharged…
Version 2.0 Out Now! Flies double the distance! This is a mini frisbee modeled off of the Zip Chip toy: https://www.zipchipsports.com this is my first version hopefully I will be able to follow it with an even better model! When thrown…
if you use these on a Frisbee, use as many as you like,on top side, spaced evenly to keep frisbee balanced, furthest out as you can, round end facing direction of spin and slightly angled toward direction of flight, experiment until you…
No changes at all! Just created a working .stl
Inspired by existing clips I made a new design featuring the shrimp from the Go Throw logo. Go Throw is a tournament held in early 2022 organised by the Gothenburg Ultimate Frisbee team La Bamba. I printed mine using normal PLA in the La…
Frisbee disc with diameter 17.5cm. No supports are needed by printing the disc upside down.
Public domain model of a frisbee by twin97 . Originally uploaded to Blend Swap .
This is a great flying, Frisbee-style disc made using an upcycled NEW Prusament spool component. Design goals included: Strong flight performance Comfortable handling — no sharp edges, burrs, or protrusions Clean, appealing appearance…
Have you ever tried to play throwing a regular coaster? They are not easy to control and tend to flip, losing their trajectory. Try with these mini frisbee-shaped coasters instead! Dimensions: Diameter 83mm; Thickness 11mm (⅓ of a U12…
Frizerator H4A1 Frisbee Launcher Pistol Remix of Dave Delay's Fizerator H-4, https://www.thingiverse.com/thing:693465 New feature of the remix: Powered by easily available rubber bands (30 mm ... use 2 or 3 to achieve desired power).…
V2 is outWhistles are now inside and the name is on it V3 soon it will have better whistles and a more flush design
I had a friend who had some special frisbee golf discs they wanted to hand on their wall. I designed this for them. This is my first ever design after having my printer for about 2 months. The top back area will need some support but…
Tisk z PETG Pro větší pevnost tisknout s max infill.
V2 Published - https://www.printables.com/model/964355-overengineered-frisbee-v2 I tried printing a classic frisbee, but I found out, that the standard edges won't be strong and flexible enough, so I've adjusted them, so that the frisbee…
Simple Dog Disc V2 made from TPU.
This compact, 3D-designed disc is built for accuracy and strength, guaranteeing smooth, steady flights every time. Whether you're at the park, beach, or just chilling in your backyard, the Mini Flyer is portable and suitable for all ages.…
My original project: https://makerworld.com/en/models/592161#profileId-513803 A 3D-printed frisbee designed for long-distance throws features a sleek and aerodynamic design optimized for stability and precision. The frisbee has a smooth,…
A mini frisbee. Print Settings Printer Brand: Bambulabs Printer: Bambu X1C **Rafts:** No Supports: No **Resolution:** 0.2mm Infill: 15% **Filament:** Varies PLA, PETG, ABS Varies Category: Toys & Games
The product of the Aerobie company inspires the model. The model has been printed and tested, so it works well, but there are some important adjustments before printing. How to print It needs a minimal weight of 10 grams (15 is better) ,…
Full mini frisbee Made with 20% Infill
A customizable Frisbee/ Aerobee ring based off of this mode:l https://www.thingiverse.com/thing:2935403 This ring has a customizable insert for a variety of colors or different filaments. It contains both a full diameter insert and a…
Intro This is a fun micro frisbee designed to be super compact and lightweight, yet it flies surprisingly well for its size . At only 18 cm in diameter, it’s perfect for printing on any 3D printer — even smaller ones like a Prusa Mini or…
Apple product owners have tons of disposable income right? How about you print this for the easiest way to throw away your $25 dollars! Also, comes with the added benefit of insuring you don't lose your ~$1 print if you care about that.…
has a hole to hang on a bag or something
Frisbee in Euro-Design, Durchmesser 30cm, Höhe 2,5cm und 2mm Wandstärken
🌌 AeroBlade-6: Futuristic Winged Frisbee (Print-in-Place) Welcome to the AeroBlade-6 , a high-performance flying disc designed from scratch using fluid dynamics and custom wing profiles. Unlike normal flat frisbees that slow down due to…
Just a simple reel for storage and deployment of wire, string, cable, or any other long thin and flexible objects. Inspired by a mention of a similar frisbee reel for deploying ground plane wires easily. Capacity will depend on diameter…
TPU Drum head This comes in standard drum sizes 4in, 6in, 8in, 10in, 12in, 13in, and 14in. If you're not a drummer they make a great Frisbee Printed with TPU with the following settings 0.20mm Layer Height 4 walls 6 Top Shell Layers 6…
Get those discs out of the drawer and onto a wall! Designed for Discraft Ultrastar discs, mount also hangs TOSY LED discs very well. Angled top lip matches disc rim angle and keeps disc securely hanging. Uses 1 3M Command Strip (Small…
Locking frisbee clip (uses 4 M3x10 screws)
This is a basic Frisbee Golf Sized Frisbee with 3DG logo. Just made this to use up some filament and give the kids something to throw around.
The name on the top is just a gimmick, which I added to my print. It is not part of this model. First, I printed the letters in a separate print job with only one layer in height. Then in a second print job, I printed the frisbee directly…
Simple Dog Disc made from TPU. Collections available Losi MicroT Spinner & Fidget Arrma RC Earrings
About the Pocket Frisbee: The Pocket Frisbee is based off of 3D KIMBA's AquaFlyer (which is also why I kept their logo on the top of the disc). This design removes the aesthetic holes from 3D KIMBA's design in order to increase the…
UPDATE use the tighter tolerances, because the other inner disk is too small This is a supportless balanced version of RyGuy3D's Mini Pocket Frisbee V2 To keep it balanced print with no bottom walls and grid infill It is a friction fit,…
A foldable Frisbee that is compact and small. I used 3 perimeters and 18 percent gyroid infill. The tolerance is a little tight so you may need to scale it up a little.
A frisbee with a hole in the middle. Stable at moderate to slow speeds. Printed in TPU without supports or rafts, Infil 20%. Can increase or decrease to control weight
Motivation: In the past I have used those frisbee clips that are a solid one piece and sort of slip around the frisbee. I find those difficult to put on the disc and very prone to slipping off while walking around. I also hate when the…
There are plenty of displays out there, but almost all of them are designed to showcase objects that have a relatively flat bottom, such as a phone or a tablet and hence will stay put even when it gets slightly perturbed. However, these…
Frisbee with Radioactive Symbol – 3D Print Bring an original and slightly “nuclear” twist to your outdoor games! This 3D-printed frisbee features the classic radioactive symbol in the center, making it instantly recognizable and perfect…
Fun frisbee, stable flights. play at the beach, park, or backyard, frisbees provide endless fun and exercise for people of all ages.
Chuck-It likes to make proprietary crap. Created this so I don't need to spend $7 on their fetch rings. I created another version that can be inserted into the center of a Nerf dog frisbee. PRINT WITH PET-SAFE TPU!!
I have created a small frisbee for me and my child. It is in total 95 mm in diagonal. I have printed it in TPU, so it is flexibe. It is also possible to print it with PLA, but I highly recommend TPU, because with PLA its to hard. We have…
I made this frisbee, actually for my kids, but it is modeled after disc golf frisbees. It has a diameter of 210mm, and when printed right, you can get it to correct weight as well. You can use my settings as a starting point, and adjust…
One simple file to print. Make sure to print the frisbee upside down in order to avoid a massive bridge. Print Settings: (I use a Flashforge Adventurer 3 pro) Print time: 3-4 hrs Layer Height: 0.25mm Print Speed: 60mm/s - 80mm/s 2 Shells…
Frisbee Model is made for Yeeps Hide and Seek® 's plushie and is meant for skits, yt videos, personal use etc. If you make a video on this model please tag @Nutty.Clxpz on Tiktok and @GETOVERIT - Staff on YouTube
its easy to print and you can turn you printer to MAX SPEED because it is so simple and easy. works with all filament!
Frisbee je létající disk, který je určený převážně pro zábavné účely. Parametry: váha: 200 g průměr: 24cm barvy: model je dvoubarevný Print instructions Disk doporučuji tisknout z materiálu PETG - kvůli jeho houževnatosti a pevnosti. Díly…
A frisbee with three levels must be better than a single level, right? ;)
With this frisbee you can play till the absolute end of the day. Even in pitchblack it's easy to throw and catch. Others may think it's a kind of UFO… CONSTRUCTION For the battery (CR2032) I used a holder with PCB and build in switch.…
I love Frisbee, but I struggle with performing stunts and tricks. That's why I created these Frisbee designed to make throwing and performing tricks easier for the user. Printed in TPU with supports Printed in ender 3 s1 pro Make sure…
0.02 mm layer Ender 3 v3 SE scale to whatever size you want! the white frisbee was printed @ 2900% from the original size
A Frisbee If you enjoy this model be sure to drop a like and post you make Happ Printing Everybody
If it destroys your optical drive, don't blame me, I don't take responsibility for that, but my drive survived it ;c)
This frisbee easily flies 100+ feet (large one 200+) on a good throw: use lots of wrist snap and point the front slightly upward. The smaller one will fit most printers while the larger one needs a 300mm x 300mm bed. Prints well and…
This model was designed for anyone who wants to 3D print a functional and fun frisbee. It's robust, optimized for a stable flight, and can be printed without supports on any medium-sized 3D printer. Key Features Aerodynamic Design : The…
This is a holder for disc-golf discs for attaching to the Multiboard system. It's for displaying them, not for most efficient storage. Print instructions: Print once oriented as in the file and once mirrored. I printed mine like the…
Customize your own with the blank .stl below.. Or send me a name and I'll make you an stl.
Easy to print with any filament for a cool breeze throughout the day.
Print in any plastic material. Recommended with PETG and low infill to add some flex. The overall size is 205mm diameter. The size of each hole is 73mm. Fits on a standard 250x210 bed (Prusa MK3S).
Description I present to you crazy frisbee, a fun toy that will entertain you with your children but also adults. Istruction: Neccessary: a rubber band thickness 5 mm , another rubber band 30mm diameter or small diameter This kit from…
This 3D-printable flying ring combines classical aviation aerodynamics with modern fluid dynamics optimization to create a highly stable, long-distance flyer. Key Design Features Optimized NACA 23010 Airfoil: The ring utilizes a modified…
Printed with TPU. 20 % infill. No support. Need to scale it to bed size. Hope you like it.
This is a picture of a Border Collie catching a frisbee.
