Counting matching models…
This is a modification of Volzotan's excellent model but for Kodak Funsaver 11mm Lenses. I would highly suggest checking out Volzotan's video on his process: I would also suggest checking out this video by George Moua on how to remove the…
I use https://www.thingiverse.com/thing:4597246 base to make a Kodak FunSaver lens to Sony E-mount, kida like this How to Make a Lens from a Disposable Camera (90s film look) - YouTube but looks better. it can printed without…
I did file the two little plastic pieces to have flat surfaces. The viewfinder probably has a field of view of 35mm.
This is for those running the V-Core 3.1 beta 1 or 2 toolhead and the funssor CNC super lightweight XY joiners (see photo for the exact model - this is the lightest weight one they make). Running the stock end stops will result in your…
Moved to CNC AB mounts due to running 2804's at high current. Didn't see any PG7 mounts for an umbilical for these so I remixed a design to meet my needs.
The Funssor CNC XY joiner is hollow where the X limit switch should hit a stop. Unfortunately, I noticed this issue only after completing assembly and alignment of the RatRig V-Core4 X gantry, rails, toolheads, belts, and wiring up the X…
This model is designed to correctly align the BambuLap building plates for the Kobra S1. This model is specially designed for the Funssor heating bed and bed carriage with 8 mm steel spacers in between. Print settingsPrint settings:…
This is a border to surround the bed and bed heater for anyone who has modded the sv08 and replaced the OG taco bed. I used this bed adapter and a total of 8 5/16 nuts doubled up to raise the bed off of the adapter. The bed that I bought…
The end stop cap compression fits into the square hole to allow for the X end stop to activate. I added the washers to match my colour scheme as the red didn't match with anything on the printer. Link to the Funssor Ratrig V-core4 3D…
RatRig VCore4 Titanium Tube Funssor CNC XY 6x M5 x 10-12mm 6x M5 Screw nut
My dad bought a Funsicle pool. Funsicle is made by Polygroup. Polygroup is, at its core, one of the largest artificial Christmas tree manufacturers on the planet. The included skimmer reflects this heritage faithfully. This adapter mounts…
This is a small rework for the rear panel on the Recreator3D "FunSize" Mk6. This allows you to “hinge up” the electronics/top of the funsize, and gives you easier access to the innards.
BOM: 10x M3 Washers 0,5mm thickness Left and Right overall 2mm washers for the Upper 2 Bearings (downside)
It's a redesign of the CR10_E3DV6_MANUAL_BASE_V7.5.stl part from petsfang v2 ( https://www.thingiverse.com/thing:2759439 ) This new part fit the specific Funssor CR10(-S)/Ender replacement carriage available on aliexpress here…
Designed to be printed in ABS with shrinkage in mind. I have two sizes for the stepper motor shaft depending on your printer tolerances. If you're having issues hit me up and I can add more sizes. Print Settings Layer height: 0.2mm.…
Introducing PrintABlok compatible side panels for your Recreator3D MK6 “FunSize” pulltruder. Now you can bask in the glory, knowing you will be able to build additional storage onto your funsize for your tools such as tweezers to aid in…
Parts to help fit a 4.1 steel gantry to funssor joiners on a ratrig vcore 4.1 End plug is designed to fit a m5 flanged locking nut, to allow for movement and adjustment you will need to drill a slightly oversized hole (6mm+) in the right…
A simple and quick holder for the cylinder included in the S30 Pro Max machine from Sculpfun. You can attach to any surface with a 3 mm flat head screw, glue or mounting tape.
This mod will allow (and fix) 1204-1605 Wobblex acceptation for FUNSSOR Aluminium arm for the BRS-Z-UPGRADE 3.2 Link to the aluminium ARM BRS-STORE for the Z-Upgrade 3.2 This FUNSSOR Arms system is not yet official in the BRS-ENGINEERING…
Have you found that you accidentally printed ANOTHER Recreator3D MK6 “funsize” base unit? Well, now you can use it to strip your bottles down while you're pultruding on the other! Q: Which bottle cutter are you using? A: The bottle cutter…
Link to video with examples: I like to make custom lenses, and I wondered what would happen if you used a Kodak Fun-saver Lens on a iPhone. The result surprised me, but I have had a lot of fun using it for macro photography. Link to CAD…
Made to fit the Funssor Voron Tiranium X gantry https://www.aliexpress.com/item/1005008211910316.html?spm=a2g0o.order_list.order_list_main.42.79141802bulQi2 I wanted to use lock nuts instead of Loctite. So I create a new insert that fits…
anycubic vyper adapter kit for recreator use the mainoard plate for a guide for drilling holes for mounting i made mine with the psu housing, i took the top plate off and drilled holes in it to attach to some of the extrusions from the…
These are spacers for a 9mm (10mm works too, don't be me, buy 9mm belts) for the very cheap (about ⅓ of the others I could find when the bearings are included) laser cut stainless set by Funssor…
For use the the (very cheap) Funssor stainless steel laser cut set (https://www.aliexpress.com/item/1005007038349339.html). You'll need the unmodified motor spacer from 3DPrintingMods/AluminumG/smokescreens github. Spacers for the XY…
I printed in ASA, 25% infill, 4 walls. Check the heat tolerance of your filament before using this model with a print requiring higher bed temps. .f3d included for easy dimension adjustment.
My dad bought a Funsicle pool. Funsicle is made by Polygroup. Polygroup's claim to fame is being one of the largest artificial Christmas tree manufacturers on the planet. This should tell you everything you need to know about the included…
Parts to help fit a 4.1 steel gantry to funssor joiners on a ratrig vcore 4.1 End plug is designed to fit a m5 flanged locking nut, to allow for movement and adjustment you will need to drill a slightly oversized hole (6mm+) in the right…
This model is used to connect Funssor Led strip to the top mount of a Voron V0. It does not not require any hex nuts to be preloaded on the 1515 extrusion. i used 4x 4mm m3 screws. However, you can use longer ones.
This is my take for read umbilical modification for Voron V2.4 printers with Funssor CNC motor mounts (see attached photo to confirm that you have compatible motor mounts). This model will not fit printers with official AB motor mounts.…
Just making this as a reference model. 2 holes are not spaced correctly, pictured Not perfect just as accurate as I can get excluding threads. Step file is slightly bugged, will need to convert to stl to step if you need it fixed. I think…
I bought a Funsicle pool to replace my old Intex but didn't think that the hoses and connectors would all be different. I have made this to screw onto the inside of the Funsicle pool over the pump output and connect an Intex hose. I did…
The Funssor Aluminum AB Upgrade kit is missing a couple things, 1, an endstop relocation for Y axis, and 2, a way to install an Umbilical for wires eliminating the cable chains in order to reduce mass and vibrations. Printing…
Trim walls are slightly thicker than the original motor trim model. It might be a tight fit when installing the trims onto the motor blocks. This is completely normal.
Holds different tools to the side of a Funsicle above ground pool. Slide them on the narrow side of the leg and rotate to set in place. 1 will hold like a hook, 2 will hold long-handled items horizontally. Printed with no supports and 15%…
To be printed with ABS, used for this CNC XY Joint (also AWD) mod while having the X endstop mounted on the X carriage.
Use this paddle to make your partner see stars. You'll see them as well, but on your partner's body. Print it with good infill (30% or more) to have a very robust part. Use PLA if you want a hard slap or TPU for a softer feel. Have fun!
