Counting matching models…
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Print details: Material: PLA Recommended layer height: 0.10mm Supports: yes Infill: 15% [Englilsh] https://www.thingiverse.com/thing:2635032 1:12_Kettenkrad model by compon I made a Remix of the following. -No need to paint by using 3…
1:42 Scale German tank destroyer from WW2. There's no moving parts, it's just one solid part. It should print in the orientation I have already sliced it in for maximum strength of the gun barrel. I won't be uploading the Panther tank,…
I strongly recommend printing the model horizontally to give the snap lock more stability and durability. Feel free to support my work and leave a tip.
29T pinion compatible with the Kyosho Fazer FZ02 RC touring car. Provides additional torque/acceleration over stock 32T pinion, at the expense of some top speed. Pitch is 48DP (48 teeth per inch of diameter) and should be compatible with…
Sony NP-FZ100 battery case would be nice if you could post some photos after printing
Sd.Kfz. 234 Ver. 2 kitcard 1:100 scale model German eight-wheeled armored reconnaissance vehicle used during World War II, known for its speed, mobility, and distinctive turret design. The Sd.Kfz. 234 Ver. 2 is a kit card model – all…
I'm sharing this for non-commercial / sale use. Please don't steal and sell my design. I've seen numerous cup holders for the land cruiser fj80 and I figured I would design my own since I have a 3D printer sitting in the office. Included…
Just a simple mount for Quad Lock with dampeners for a Yamaha MT-07 with LCD-display. It has a structural design and should be pretty sturdy, but I take no responsibility if it breaks ;) It requires a M5 heat insert, I use M5x9,5x7 mm.…
This is 4x holder for the Sony NP-FZ100 battery. There is also a 2X version in the files. The lid attaches to the holder with 3x3mm magnets. Also attached are the Fusion 360 files. If the fit is too snug, please modify the current offset…
Very practical battery holder for 2 NP-FZ100 batteries + 2 SD cards and 2 Micro-SD cards. I got the idea from the Sony Facebook Group, but the creator removed the file from thingiverse and it is nowhere found again. As i found the Design…
------------------- Sept 2026 Update ----------------------- Following some helpful feedback, the original models have been marked as "DEPRECATED". The updated versions have an improved fit, and should hold the batteries more securely…
Geetech PLA Matte BambuLab X1C Mit Supports
EDIT: initially forgot to include the wheel file, at the time of writing this its uploaded but hasnt rendered a preview and isnt included when hitting the "download all files" button yet, you can get it from the list of individual files.…
I've printed vertical ('sony' face on the plate) with support only for the top retention overhang, the small guides on both internal borders can be printed without any support. I tested it with 0.1 layer and with 0.2 layer, 20% infill;…
Deutsches Beispiel EU-Kennzeichen Lang und Einzeilig. More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
The idea was to use one per battery. And write on each side if the battery is full or empty. Push the battery from the open side until it snaps in.
Category: Automotive
This clip is a spare part for the Suzuki Swift. The original clip was a little bit loose and someday it fell down into the motor area. This happend a few times before, but this time I couldn't find it anymore :-( I designed it with…
Thanks to Mike for his great work! Based on his model I redesigned most parts to improve it further, I hope you like it. Improved features: Propeller driveshaft of the original was prone to snapping off. Now it is a 2-piece design, where…
I made multiple Sony NP-FZ100 Batterieholders for Gridfinity. 1xBatterie 1x1x3U (6U) 2xBatteries 1x2x3U (6U) 4xBatteries 2x2x3U (6U)
This is a movable model of the Sd.Kfz 302 "Goliath" in a scale of about 1:6 (~25 cm). The Goliath light charge carrier, a self-destructive minitank (German: Leichter Ladungsträger – Goliath), called by the Allies "beetle-tank" was a…
I created a two fictional or alternative types of models of Panzerjäger Tiger (P) Ferdinand (Sd.Kfz.184) mit Krupp Maus II Turm mit 150 mm Kampfwagenkanone KwK 44 L38 in size - scale 1:100 for model makers to the dioramats or like a model…
Sony NP-FZ100 1x2 Gridfinity bin stores 3 Batteries, and stacks when empty.
Scale 1:72 The model features a fully rotating turret mounted on a bearing for smooth movement, along with freely spinning wheels for added realism and playability. Assembly is simple and beginner-friendly: Glue the front and rear hull…
TPU Bumper for Slim Angled Talon Magazines GavinFuzzy Remix
I have sliced the model in cura and added supports below the notches. Variant 2 has serrations on the sides that were intended to make it a grippy surface to aid removing the cover. But pressing on the side also jams the cover to the…
This is a custom designed "dashboard accessory platform" for the 1995-97 series Toyota Land Cruisers allowing for the mounting of a variety of accessories such as phones, small tablets, radios, switch panels and more with the use of 20mm…
37T pinion compatible with the Kyosho Fazer FZ02 RC touring car. Provides additional top speed over stock 32T pinion, at the expense of acceleration. Pitch is 48DP (48 teeth per inch of diameter) and should be compatible with other 48DP…
Geetech PLA Matte Grau Bambu Lab X1C Mit Supports
Frame plugs for Yamaha FZ6, to stop filth from entering. Video in greek: Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: 3D Prima TPU Black Notes: Print in Flexible filament…
Holder für two Sony NP-FZ100 batterys. I printed two in different colors to know which battery is full or empty.
LEGO Panzerwagen Sd kfz 247
Double cupholder for the Delta Shifter Console for the Land Cruiser 80 - FJ80/FZJ80/LX450/etc. Fits an energy drink/soda can, and a Hydroflask. Matches the body lines of the console. Bolts in using 3 ¼-20 bolts. No real great way to print…
Geetech PLA Matte Grau Bambu Lab X1C Mit Supports
Sd.Kfz.8 Half-Track. All the pins and holes require some filing. The photo shows it towing a PaK 40 75mm. Most sources say it was used to tow a heavier gun. The new modified front axle 8, steps 9 and rear panel plug into the chassis A…
The sd.kfz 232, abbreviation of Sonderkraftfahrzeug 232 or special vehicle model 232, was an armored exploration car used by Germany in the 1930s and 1940s. This model is the 8 rad version or 8 wheels, and just like the original it has…
Tisk z PLA, PETG, infil 50%.
It is common for older door panels to rip when trying to remove them. This tab was simply printed out of PLA and glued onto the panel with super glue. For best results, push the torn out pieces of wood back into place to make it as flat…
enheitenNachbau Schwierigkeitsgrad mittel. Für Schrauber kein Problem. Wichtig!!! Im Slicer muss ein Stop eingefügt werden, damit die Magnete eingelegt und anschl. die letzten Layer gedruckt werden können! Wer viel (oder auch weniger) mit…
Deutsches Beispiel EU-Kennzeichen Kurz und Zweizeilig. More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
English description (German description below): This is a replacement handle for the Hager 90SL FZ505 switch cabinet. Printing: I printed the part with a Bambu Lab P1S, 0.4mm nozzle, layer height 0.2mm from PLA.Handle-V0 +…
Printed at 20% infill with supports made from Cura at Grid 30% density. Height at .2 turns out nice. Takes about 10 hours at speed 60mm with the included supported model sliced with Cura at 205C tip, 60C bed. Hatchbox PLA. Best printed…
Box na Sony baterie NP-FZ100 dvě varianty pro 6kusů a 12kusů (skládá se z vrch, spodek a 2x latch) Adaptér pro SD 5ks nebo CfA 7ks (zabírá místo jedné baterie) Je potřeba použít M3x30 šroubek na jeden box 6ks (4x latch, 2x pant) Jedná se…
stackable gridfinity 1x2x8 holder for two sony fz100 batteries. sd card slot is a bit of a ‘had-some-room-left’ sollution but it is possible to get it out ;)
Ce modèle est basé sur un fichier trouvé il y a longtemps sur Printables ou Thingiverse. Je n’ai malheureusement pas retrouvé la source originale. Si vous reconnaissez l’auteur, merci de me le signaler pour que je puisse créditer…
Náhrada originální krabice transformátoru PIKO FZ1 pro modelovou železnici
Case for generic gear indicator that can be mounted on top of Yamaha FZS 600 dials. It’s an old motorcycle though the shape itself could possibly fit on some similar dashboard. There are two models - with and without Yamaha text embossed…
Belt holder for sony battery. It is equipped with a fuse, it is very tight. Printable version without supports it is possible to overcome the fuse by force. Version for printing with supports, the fuse must be unlocked before removing the…
Printed with fuzzy skin fuzzy skin thickness 0,1 fuzzy skin point distance 0,1
inspiré de ce model sur Thingiverse, Panther auf A, auf D & auf G -1/50ème, de Alainkif
Nachdem mir an meiner Hager Unterverteiler wieder ein Kunststoffteil abbrach, hab ich mich im Internet auf die Suche gemacht und das Model für den Türstangehalter an Hager Unterverteiler Schränken gefunden. Es ist das Model für den…
Knipex 3125160 needle nose pliers needle nose pliers Greifzange. 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
I had a Dell P2217H monitor that broke, so I bought a new monitor, the SE2222H from Dell as well. The stand of the old monitor was much superior to the new one, so I decided to swap them, and to my surprise, I realized they were not…
Simson Schwalbe Schrifzug, zu Deko Zwecke!
Two part remix for ease of printing on a resin printer, clean inside for easy hollowing. Category: Hobby
Skadis batteryholder for sony camerabattery.
A replacement AV Expansion door for the Panasonic FZ-10 3DO. This is a direct replacement for the OEM door and fits exactly like the original. Unlike the original door, this replacement has an added finger cutout allowing for much easier…
This is a drop in replacement CD-ROM tray cover for 3DO Panasonic FZ-1 consoles. Also included is a version with the USB cutout for MNEMO's USB Mod Prints for sale on my website here:…
Update: Added speedo sunshade! A fairly simple model to cover the dashboard and provide some protection from the sun, when my clear windscreen arrives. Fit is perfect slide on, won't come out but probably won't stay on either. STEP files…
YAMAHA FZ-09 MT-09 OIL FILTER SOCKET
This is a cover for the brake fluid reservoir of the MT-07/FZ-07. It should also fit on the Mt-09/FZ-09.
Measured and designed custom 3D-printed covers for my Sony A7C batteries to protect them from dirt while in my camera bag. This should work with any Sony A7 series camera battery, or equivalent Sony FZ-100 style battery. Print…
Update: stronger models in v5! These models contain structures that force the slicer to build more walls at the outer wall side! Also, consider if you want to print the cylinders from PLA, PETG or TPU. PLA is easy to print but prone to…
This FDM printed bracket helps mount an SD Card extension cable (not included) to the “AV expansion” bay of your FZ-1 3DO. This is an alternative to cutting a hole in your 3DO’s CD-ROM drive door to expose the ODE’s USB port. The two…
Stofzuig monden voor op de slang van een Festool stofzuiger te plaatsen, voor op kleinere plekken te kunnen stofzuigen. Vacuum nozzles for placing on the hose of a Festool vacuum cleaner, for vacuuming in smaller places. Ludo
This is a 3D-printable flush back cover for the Panasonic FZ-M1, designed to replace the factory barcode reader module with a clean, low-profile panel. Perfect if your unit never had the scanner, the module was removed, or you just want a…
smallest tested size in with 15 mm no support needed in anycubick kobra 2 plus
This model is primarily aimed at German users, so the description is intentionally written in German. For everyone else: translators are good friends 😉 Beschreibung Dieses Modell stellt ein deutsches einzeiliges Kfz-Kennzeichen als…
These simple brackets hold your FZ1 3DO’s CD-ROM drive door to the top shell. These are meant to be used when using Mnemo’s ODE. When you install the ODE, you remove the drive and the CD-ROM door is attached to the drive. When there’s no…
Das Bauteil ist pro Blinker 2 x zu drucken. Ich habe es in ASA gedruckt. Die Mutter lässt sich sauber montieren, mit voller Gewindenutzung. Da so ein lustiges Kerlchen meint die Teile auf Etsy verkaufen zu müssen, habe ich die etwas…
dérivé de ce model sur Thingiverse: Easy Print SDKFz 251, de Markopolo
Headrest Bar Mount for Toyota Land Cruiser 80 FZJ80 Leather Front Seat Allows for the mounting of accessories to the bar mount on the front headrest on a Toyota Land Cruiser. Each hole is spaced 48.5mm apart allowing for the easy mounting…
Compatible with Shimano Deore BR-M575, as well as BR-M4050, BR-M447, BR-M446, BR-M445, BR-M3050, BR-M395, BR-M396, BR-M355, BR-M675, and BR-T675/BR-T615. Name Compatible Y8FZ05000 Shimano Deore BR-M575 and also:…
Deutsches EU-Kennzeichen Lang und Einzeilig mit Spasstext realitaetsnah “MAK-ER 101” UPDATE: added "MAK-ER 1" More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
Attention à ne pas coller les chenilles penchées vers l'extérieur.
Befestigung mit 3mm Schaschlikstäbchen, gibt den Pflanzen guten halt und genug Freiraum zum wachsen. Auf anfrage kann ich gerne anpassungen erstellen.
Da die Knopfzellen in größeren Stückzahlen immer günstiger sind, die Verpackungen aber oft so, dass wenn man die erste Zelle herausnimmt, die anderen hinterher kommen, habe ich mir das Magazin gemacht. Besonderer Vorteil ist, dass die…
This model prints well at 0.2mm or 0.15mm of layer height. It fits all FZ-mount cameras, namely the Sony PMW-F3, the PMW-F5 and the PMW-F55. It comes as a clean or “marked” version, the latter features the letters “FZ” on the handle.
Holds four, Sony NP-FZ100 batteries with a snug enough fit to hold batteries securely while in a backpack. To remove a battery, just give it a little push from the hole in the 'bottom' side. I like to keep the fully charged batteries with…
This is simple cover, for the mirrors holes. You will need four M6x30 screws, as original are integrated into the mirrors. I've used spacers under screws' heads and synthetic leather for better seating of the cover and prevention of…
Short body posts to fit wider range of bodies. STEP file included. Needed shorter body posts but didn't want to cut the original ones. Best printed lying down with supports, 0.12mm layer height preferred. Should fit with minimal post…
Il existe d'autres modèles à imprimer pour protéger les batteries NP-FZ100, mais celui-ci est une version minimaliste conçu pour protéger juste les contacts, sans prendre trop de place ni de poids. Le couvercle est bien serré sur la…
This is a replacement jaw for the Wolfcraft Spring Clamp FZ40 and FZ60. To install the jaw just remove the black pin by pressing it out with a small screw driver. The print needs no support. I printed it with 0.15mm layer height and a…
Knopfzellencontainer für CR2032 und alle anderen xx2032 Knopfzellen. Druckt den Schiebedeckel auf der Schriftseite liegend. Druckbar ohne Stützstrukturen Modelldateien für 6, 8, 10 und 12 Knopfzellen. Suche in Onshape unter “Button Cell…
A quick remix from @Hami's designt to fit a single spare battery.
Lever for floppy drive Chinon FZ-502. Used also in Atari XF-551 Floppy (360kB) Spare part.
This particular print was printed for outdoor longevity using PA6-CF 3 Walls 10% Gyroid infill No Supports.
Auflagen für den KFZ-Anhänger Eduard oder auch für andere Hersteller nutzbar. Die Auflagen haben ein Innenmaß von 30x30mm für z.B. Rechteckiges Holz oder Aluminium. Diese sind entsprechend der Breite des KFZ- Anhängers anzupassen. Bei den…
Deutsches EU-Kennzeichen Lang und Einzeilig mit Spasstext “MEINE PERLE” (= my pearl) More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
Dieses Modell ist für liebhaber von Hoptimisten :) Sie können die Halterung an die Lüftungsgitter in Ihrem Auto klemmen und der gewählte Hoptimist (Größe S) wackelt während der Fahrt von ganz alleine :) Viel Spaß damit! Printersettings…
Skadis holder for 2 NP-FZ100 batteries, print with supports
Side plastic covers for Yamaha FZS 600 Fazer motorbike. These plastic parts are becoming harder and harder to find online with used ones showing up on ebay with cracks in them already. Blank one for right side of the bike and Key hole…
Beifahrer Handyhalter hier für ein S23 Ultra hoch oder quer
