40 models
Don't forget to like and comment. Right-handed joystick grip that looks cool and feels like it's the real deal. Voilà! 12 buttons: 1 trigger, 1 pinkie switch 2x 5-way hat switches This joystick grip is inspired by the Knüppelgriff (stick…
First of all, thank you for downloading my model :D Amount of batteries in configs: 2x1 CR2032 x 16pcs LR44 x 12pcs 1x1 CR2032 x 8pcs LR44 x 6pcs Print settings: Speed: any (depends on printer) Infill: 10-100% Number of walls: 3-infinite…
This is a functional replica of the Dell G13 server drive caddy (model F238F ) designed for 3.5" LFF hard drives . Precision Tolerances – The screw heads for drive mounting must not exceed 1.25mm in height (use M3 screws ). Modular Design…
Case for 12 batteries of size AG13 / SR44 / LR44 / A76
This is a 25%, or quarter scale model of a set of MG131 machine guns, with mount and feed chutes. I designed this for a friend, who was building a scale RC FW190. Most of the parts will print fine without supports, but the mount will…
As simple holder for two LR44/AG13 batteries using a standard paperclip cut down into two parts. Category: DIY
This is a reupload of my older model, which i did because it went way further than being only a Logitech G13 derivate. This is a HOTAS (hands on throttle and stick) setup, which i completely designed from scratch in Fusion 360, over the…
Made an adapter for the Dynavap M (All versions should fit) for use with a small bong cut (size 14 mm). I printed it in TPUto get the best fit. It should also work with any other material, but then u might have to play around with the…
After many, many years of service, the rubber knob broke on my G13. This is a replacement which I printed in TPU with supports on build plate.
PG13.5 threaded blind stuffing to close unused PG13.5-openings in housings. [1] Thread type: PG thread [2] Diameters for PG13.5 opening: a) threaded hole: 19.1mm / PG thread b) drill hole without thread: 20.4mm [3] Sealing: An optional…
Adapter for using an external 1.5 V power supply with devices that normally use LR44 / AG13 / A76 batteries. Printed in PETG, 0.12 mm layer height, no supports. A 4 mm wide, 0.1 mm thick nickel strip is required (the same type used for…
Gridfinity bin designed to hold 28 AG13/LR44 batteries. Bin size is 2x2x4.
an extension for the Silverstone Sugo SG13 that makes room for an Nvidia 30 series GPU, made for a friend. the clips on the front panel will need to be clipped off for it to fit without bowing up at all. i printed it in PETG for the extra…
This is a holder for the Logitech G13 Gaming Keypad to set it on your lap (your leg, specifically). I was having problems with my elbow and this alleviates a lot of the pain. It was either this or stop gaming. I made the lip separate and…
10x LR44 / AG13 Cell Battery Holder w/ Sliding Lid Quick and simple print (< 1.5hrs) with great functionality for storing up to ten of these cell batteries. Came across a handful of boxes/holders for these batteries, but wanted to create…
Ten zestaw to perfekcyjne rozwiązanie dla każdego, kto chce stworzyć własną lampę LED G13 (świetlówka LED 230V), idealną do oświetlenia wnętrza samochodu podczas detailingu. Dzięki niemu uzyskasz równomierne, jasne światło, które ułatwi…
The Display4top MIG130 Plus+ welding machine comes with no means of cable management.
Knopfzellencontainer für LR44 oder AG13, LR1154, GP76A / V13GA / RW82 / 357 / SR44 Knopfzellen. Druckt den Schiebedeckel auf der Schriftseite liegend. Druckbar ohne Stützstrukturen Modelldateien für 6, 8, 10 und 12 Knopfzellen. Suche in…
Replaces batteries in cheap toys and devices with an external power source. Use 0.7-1mm thick wire to create the contacts. Devices with leds might need an internal resistor, which matches the internal resistance of the cells. 90-150…
5 minute print on a MK4S in PetG. .25 structural layer height. Nothing special this is a small part and you can tweak fill etc as needed.
Based of the excellent Modular Battery Holder, I needed a holder for my fat SR44 coin cells. As I could not find a suitable one, I created one myself. It should fit on the existing modules, provided your printers tolerances are up to…
When I was attempting to mod my original front panel to have a LED light bar similar to the Steam machine, the 4 front screw holes snapped off. So I decided I would just print a new one, and custom design it to match the Steam Machine as…
May not good for install but it just works.
battery adapter to use ag10(lr1130) in ag13(lr44) button cell devices place on top of the cell to fill the gap so the battery is held securely to the contacts
Box for 15 pieces LR44 or AG13 battery cells Print in place hinge with tolerance 0.4mm. Tolerance can be changed by parameter in Fusion360. Print recommendation: PETG 0.2 mm layer height 4 wall lines 30% infill grid After printing: let it…
Instead of real DROs I use calipers on my lathe and milling machine . These operate with AG13/LR44 batteries and as I only hacked Chinese models the current consumption even in standby isn't the lowest. For this reason I quite often end…
Will store 12 AG13 batteries (3 per level). Based on the CR2032 Battery Storage print by AdventureWulf.
Proud owner of the good old SG13 here. The pump in my water-cooling system was dying and I wanted to replace it with an air cooler that offered comparable performance. However, top-down cpu coolers, such as the NH-L12S are relatively…
Brodit plate for Motorola Moto G13 with transparent cover/case Tested with PETG. PLA not recomended - during hot summers will melt (at 60 degrees of Celsius)
A simple baseplate/holder for mounting a G13 lamp socket. Designed as a practical replacement or mounting aid for lighting projects using G13 tube sockets, such as LED tube conversions, workshop lights, fixtures, or custom lamp housings.…
Print on left or right side with 100% infil. Category: Parts
Hello everyone, I previously shared my 130P and 150P portable reflector telescope designs and have been continuously refining them through hands-on use. This post features the updated design for the 130P model (IG130P_MK2) . (The updated…
This is a replacement rubber grommet designed for the COUGAR MG130-G Micro ATX case . One of the original grommets went missing during a hardware swap, so this model was created to match the function of the stock part and restore proper…
When you need your laser, the batteries are always empty... of course they are, i forgot to switch it off. So what to do? Replace the batteries! Mhhh... 2xLR44 (AG13)... i searched my drawer, but to no avail. What i found was a bunch of…
Knopfzellencontainer für LR44 oder AG13, LR1154, GP76A / V13GA / RW82 / 357 / SR44 Knopfzellen. Druckt den Schiebedeckel auf der Schriftseite liegend. Druckbar ohne Stützstrukturen Modelldateien für 6, 8, 10 und 12 Knopfzellen. Suche in…
Adapter for using an external 1.5 V power supply with devices that normally use LR44 / AG13 / A76 batteries. Printed in PETG, 0.12 mm layer height, no supports. A 4 mm wide, 0.1 mm thick nickel strip is required (the same type used for…
