Counting matching models…
While making this project it is highly recommended to desolder the PCB which has the side buttons on it to keep it from rattling inside of the mouse and to make the mouse lighter. This probably needs a quite well calibrated printer. The…
A simple stand base for the Anbernic RG40XXV. (3 variants: simple, "RG40XXV" inset text, "RG40XXV" outset text). In the picture you can see it printed in White PETG (PLA works too), 0.15mm layer height (you can go higher but you will get…
The Anbernic RG405M is a retro handheld emulation game console that runs on Android. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
Wall mount for DeWalt DCG405 and DCG406 angle grinder. On this grinder the guard is 35mm thick, and it's really close to the body and the handle. The mount is designed with two slots (left and right) to give some space for the handle. It…
I designed this stand for my Anbernic RG405V but I do believe this would work universally for any Gameboy styled handheld retro gaming device or cell phone. It also includes a cut out for a power cord to come up through the bottom. It was…
This is a Replacement Lever for the Lever on the Walther LG400. Use Original Screw, may be a Little Tight.
A simple cheek piece for Walther LG400 economy. The cheek piece is really comfortable. The adapter plate is simple, but it serves its purpose. You will have to print two spacer sleeves. For the 20mm spacer sleeves, you will have to use…
This is a simple stand for the Anbernic RG40XX-H. It includes a small nub that utilizes the 3.5mm headphone jack to keep the device centered in the stand. Printed with 0.4mm nozzle and 0.2mm layer height.
Needs support for the dovetail section, but otherwise works great. Category: Machine Tools
This is a great design but needed different sizes. This model will fit the Grizzly G4003 12x36 and should fit the 14x40 gearhead lathe as well. There are 2 models available as the lathe comes with 2 chuck keys. One measures 16mm diameter…
Rooftop including holder for Traxxas TRX G400/500 RC car scale 1:10 designed by Kjelgaard. Notice files V2 is made for Number plates in front instead of text. Also holder has been changed for easier access to bodyclips. The design also…
A grinding/cutting disc holder for the DeWalt TSTAK case. Will hold 3 x 3mm, 3 x 5mm and 3 x 7 mm 125 mm discs. Angled to fit, yet not enough room for the discs to fall out of the holder when the lid is closed. The holder fits in the…
Hello everyone, I was looking for a screen cover for my RG40XXV so it would be safe inside my bags, didn't found any so I made one. This is my first 3d modeling, feel free to remix it and make it better! (let me know so I can print it!)…
The stock rubber way wipes on my Birmingham YCL1340GH kinda suck. I designed these upgrades in 2 pieces each. the main part can be printed in PLA, ABS, PETG or anything you want, then the wiper part printed in flexible TPU and the parts…
You will also need 2 flathead M5 30mm screws and 2 Μ5 washers Category: Sport & Outdoors
An alternative cocking handle for Walther LG400 Category: Sport & Outdoors
This is a slim snap case for an RG405M to help it travel better inside a bag. It's intended to re-use the original packaging foam piece to protect the front face. Place the RG405m in the case, place the foam piece on top and apply a…
My Birmingham YCL1340GH came with a 30t, 40t, and a 127/120 double gear, which allow most common inch and metric thread pitches. These additional change gears will allow you to cut nearly any pitch that exists. For example, The stock…
A custom top cover/faceplate for the Deepcool AG400 and AG400 MAX CPU(may fit others) air coolers. It fits securely over the top of the heatsink while maintaining full airflow and fan performance. Features: Precision-fit dimensions for…
Some Logitech mice are known to develop scroll wheel issues over time. The pin/rod that rotates the scrolling mechanism inside gets worn out after a while and starts skipping. I used to buy replacement wheels online but they also tend to…
No supports printed by ASA on textured PEI plate
This is a chuck cradle / bed protector for 6" and 8" lathe chucks. I designed it to fit the ways on the Birmingham YCL1340GH, Grizzly G4016 and many other brands of the 13.5x40 lathes sold by various US Importers. Use a raft and plenty of…
These fingers were made in our lab for manipulating 15mm and 25.4mm rectangular glass substrates.
This is a headstock mat for a 1340 lathe, such as the Grizzly G4016, Jet GHB, Birmingham YCL1340gh, etc This is only half. Most 3d printers arent big enough to print this in one piece. Print 2 of them and glue them together. I am…
Dobot MG400 Button Pusher to affix to the arm
This is a remix of a great idea from The_Architect_23, I have the larger Grizzly G4003 lathe and my backsplash had a thicker top. I resized the original holder to fit over the backsplash as well as extended it a little. Resizing also made…
Haven't seen strain relief designed for this mouse, even though it was a very popular mouse, so I made one, inspired by the LethalGamingGear model. For use with custom 550 paracord cable, replaces those normal heat-shrink ones. Comes in 2…
Zyxel VMG4005 \ Cetin Terminator wall holder
Print this in whatever material you wish, using plenty of infill. I created the model with 16.2mm bore, which should give you a sliding clearance, but not be too loose. Just to clarify, I designed this for someone else. I do not own a…
A horizontal/vertical housing for digital thermometer. Category: Sport & Outdoors
This is a 2 piece lockout for a Siemens panel. Attaches with 3 M3 screws and you can use the base to locate the screws.
This is a simple cutting disc holder that you can mount in the DeWalt DCF409 TSTAK insert, and probably for other angle grinders too. You can perfectly carry it with the side handle, if you don't throw around with your TSTAK boxes, the…
Anbernic RG40XX H Stand Simple desktop stand for the Anbernic RG40XX H . Slightly tilted back surface for better stability and display. Small positioning nub that uses the 3.5 mm headphone jack to keep the console centered in the stand.…
This provides a simple model of the FluxGrip. Red are the threaded bolts for mounting. White-grey is the space that needs to be allocated for the cables/connectors to pass through. Made in FreeCAD. For educational purposes only.
Ginetta G40R as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Right and left rotating skew planar for 5.8 Ghz. Especially for the RG402 cable. If you are quick at soldering, petg will do. Otherwise, choose something heat-resistant. You can print it with 0.12 to 0.2. I wouldn't recommend it above that.
tray mounts to the top of your G4003 tailstock, helps hold drills and all the other random tools that accumulate. 4mm threaded inserts are recommended for the pinch screws, but you can secure it however you want
If you've got a PRO-G40 and wanted to mount it cleanly to your PC case's side panel mount points, you're not alone — and you've probably already noticed there's nothing out there for it. Every existing SanDisk holder is designed for the…
Mouse case consists of base and cover. Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN PLACE Test…
There is no official DeWALT insert for TSTAK II cases to hold a DCG405FN flat head angle grinder. I have created this part to be installed on the DeWALT N510043 insert (originally designed for DCG405 angle grinder) to support it properly.…
This 3D model is a custom-designed top cover/faceplate for the Deepcool AG400 and AG400 MAX CPU air coolers. It fits securely over the top of the heatsink while maintaining full airflow and fan performance. Features: Precision-fit…
Mouse case consists of base and cover. Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN PLACE Test…
Some Logitech mice are known to develop scroll wheel issues over time. The pin/rod that rotates the scrolling mechanism inside gets worn out after a while and starts skipping. I used to buy replacement wheels online but they also tend to…
A mount for the RG40XX V for the IKEA Skadis Pegboard with a neat Anbernic logo on the side
This is a (hacked together) RG 40xxH Grip Case. I am very new at this and basically took the TrimUI Smart Pro grip case (with permission received via DM) by @dildesigns and reshaped the inside to fit the 40xxH. The original grip case by…
A magnetized case for the wonderful Anbernic RG40XX H handheld. Use 8 6x2 mm magnets and glue the foam from the package to the lid. Use another foam with a 6 mm width if you don't have the original anymore.
As-thin-as-it-gets hard case for the Anbernic RG406V (and probably the RG405V). Print the three parts separately, only the joystick cutout should require supports. Use 1.2mm x 31.8mm wire brads for the hinges like in the original. Glue…
I more or less frankensteined the original model until it fit the RG40XXV. The hinges are a little tight so take your time installing the screws. Check out the photo for screw size. Print using a brim as well worked for me.
Magnetic USB-C Charging Dock for Anbernic RG40XXV Originally designed with use of silicone sleeve in mind, but still works without one. USB-C connector does stick out a bit. If someone knows of one with a lower profile, please leave a…
This is an improved version of the RG40xxH grip case. I find it more ergonomic and it protects the device as well. Let me know what you think! PS - I ran out of blue filament but using the standard blue filament from Microcenter was a…
This stand allows you to use a detachable magnetic USB charging cable with your Anbernic RG40XXV. It's recommended to use tree supports for the cut out where the charging cable feeds in. This is the charging cable I use:…
Skadis wall mount stand for the anbernic rg40xxv. (to use with a grip) Made a hole for Magnetic usb-c cable connection for easy access. I used RG40XXV GRIP by : r_mix on makerworld.…
A rugged case for the Anbernic RG40XX H. I work in construction administration, so the device spends a lot of time in my truck. 06 September 2025: Added a modified bottom box that includes a “thumb gap” to assist in removing the handheld…
Upgrade your RG406V handheld with this Xbox-style grip . Designed to align perfectly with the buttons and analog sticks, it enhances comfort and hand positioning while keeping the compact vertical form factor. Features: Ergonomic design…
Includes the following sizes: 40x40 Type B 40x80 Type C 40x120 Type C
I designed a simple joystick replacement compatible with the little sticks on the Anbernic RG406V, RG406H, RG476H and RG477M Android retro gaming handhelds. They are lower profile than the other models for these handhelds, and I beefed up…
Simple slip-on case for Anbernic RG40XXV. Originally created by XmonikerX .
Base plate with a single centre M3 mounting hole to allow you to make your designs in two pieces and use this as the base mounting plate.
Here's a form-fitting, slim case for your Anbernic RG405M. You spent a lot of cash for your premium Anbernic device… so why not protect it in custom-fit style instead of using all the the generic soft-shelled case options out there? This…
This wall mount will allow you to hang a single Pet Safe ScatMat model G402-5873. Use Large Command Strips x 2 to mount it to the wall. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: .2mm Infill:…
This is a snap case for the Anbernic RG405m. It's meant to be felt lined to protect the device and create a tight fit. I use 1.2mm x 31.8mm wire brads for the hinge.
This is a case for the Anbernic RG405v. It's meant to felt lined to protect your device and create a snug fit. I use 1.2mm x 31.8mm wire brads for the hinges. They're press fit.
Destekleri tekerler hariç tabanın her tarafına uygulayın aynı zamanda sağ sol yan aynalara da destek atın. Tekerler dönüyor.
Print with the lowest layer height that your printer will allow. I used 0.08mm on my Bambu Lab P1S. Print with supports. I stopped working on this because it is “good enough.” I have included the SolidWorks file if anyone wants to make it…
