Counting matching models…
This design is made for you to use in your projects in Fusion 360. You have .STEP and .f3d files for both the SG90 and the arm, or both in .STEP and everything in .f3d. You have the real measurements of one so you can use it perfectly for…
Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…
1 to 1 scale of a MG90S servo. Could be convenient for projects to build in your servo!
This is replacement horn for the *SG90* servo The inner teeth should fit, there is also looser and tighter versions
A small robot arm using SG90 hobby servos designed in 2017 and revived on request. I bought the small screws and tools at : https://www.kingmicroschroeven.nl There where still some old videos online: I included the Fusion 360 file so you…
Printed with Prusament PETG White 0.2mm support is required.
My make of the Spider robot(quad robot, quadruped)-SG90 by regishsu using an arduino nano and servo shield with 2x 18650 batteries.
A bracket to mount a SG90 or MG90 servo to a plate. Normally printed in PLA with 0.15 mm layer height.
I made this mounting plate for a micro servo because my 9G servos didn't have the disc mount which was used in this robot arm model ( http://www.thingiverse.com/thing:1684471 ) It fits my "Tower Pro" SG90 micro servos, which have 20 tiny…
precise replica of the arm that came with my MG90S Servo Higher resolution / more detailed / fixed / easier to print version also available (improved versions)
An extension arm to get a longer reach for the SG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the MG90 servo's
Changelog/News: 2021-02-03: Added new variant "08 Gear rack drive (main body) v5_strongerprint" for easier removal of support structures 2019-02-24: Updated "11 Gripper arm" to v5, implementing these suggestions 2019-02-10: Peter (…
Slides in between the OEM mounting plate (required) and the display. Print with the front facing down so you can get a nice finish. (Will require support)
Adjustable stand for xiegu G90 with 5 available positions !!IMPORTANT!! Make sure your printer doesn't have any issues with elephant foot, because you may have some problems with teeth to get into radio radiator. Try minimalize it with…
A simple micro servo dummy for help on your creation needs. One thing i had no idea about this servo (particularly the Tower Pro, not sure about others) is that its body is not perfectly square but is slightly tapered towards the top.…
Update: Added .step and fusion360 source files I plan to use this automated iris remix for my prusa enclosure and later to control my air exhaust system from the printers and laser cutter. Using a 24 teeth spur gear instead of th 12…
Fully printable SG90 Stepper rotors. Might also work with other servos if you scale it appropriately. Category: Robotics
Small bracket for mounting a SG90 9grams Servo flat against a surface with standaard screws. Recomended to print in PETG or ABS.
... this is the perfect digital to analog interface for mechanical engineers! Consists of a "button pusher arm" and a bracket to hold down the servo. I used two of these to automate my coffee maker: first servo pushes power button, a…
Very simple to print. Use 2 M2 screws for servo mounting and 2 M3x10 screws for the rack
It's better to use SG90's screws. Discover my miniatures, keychains and others models on my Printables page.
All the credits goes to https://www.thingiverse.com/thing:3050358 But the original does not fit TowerPro MG90S 180deg metal servo i have. Slight changes were needed here and there, now it's complete and everything fits well. Including…
This is a custom-designed servo horn made specifically for the MG90S micro servo . It’s intended for projects that require 2 mm-diameter connections , such as lightweight linkages, control arms, or small mechanical assemblies. Although I…
A custom pulley designed for my finger-servo project! This is a modified GT2 6mm, 20-tooth pulley that perfectly fits the MG90s servo. I printed it using PLA with a standard 0.4mm nozzle and a layer height of 0.2mm, with a slower print…
SG90 Servo Motor
The SG90/9G servo is very popular - and every time I see it in a project (including my own ) the little white plastic connector that comes with the servo is used (because the connector has tiny teeth that are not printable). For my next…
Simple knobs for Xiegu G90 You can choose between standard version, and second one with rubber oring to improve grip, i used 22x2 oring CAD files included Print settings: Layer high: 0.2mm Infill: 20% Depending of your printer nozzle and…
Nur noch ein Arm. Seht euch auch Typ1 und Typ2 an.
Hi, I made a 3D model of a SG90 Servo Steering Gear, 20 tooth, 0.5 Mod 20PA. This is used in my project '35 KPH FAST Lego RC CAR - Lego RC Car Part 2' on my YouTube Channel TinkerTown. Check out the details there.
Print Settings (that worked for me) PLA+ 2 walls 10% infill No supports and I didn't use a brim or raft while printing
An extension arm to get a longer reach for the MG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the SG90 servo's
Description Syringe plunger that can be automated using a microcontroller and a servo. The plunger is designed to fit a 100 ml syringe. Travel distance of the plunger could be increased in another version. Printing Can be printed with…
Basic servo arm/horn that I remixed in a few minutes for all of your dual-armed needs! Surprised that there wasn't a model like this already considering how easy it was for me to make, but hey, there is now one of these ready for your…
Please like and follow and post your makes This is a speaker redirector for the Xiegu G90. It was designed to be held in place by the G90-H1 bracket, but tape would also work. I made the redirection cone much shorter than the original…
Intro I wanted a slimline protection frame / side rails for my Xiegu G90 but could not find any suitable ones on the internet. So I set about measuring up and creating my own. Design Principles Slimline - not take up too much space, but…
Thank you so much to inlinerbutch who made the inital stand that I remixed from! This is a fantastic stand that folds up nicely to pack up my G90 . Unfortunately there were some sharp right angle corners on the stand that happened to snap…
These buttons, or more accurately button adapters or extenders, can easily fall off during transportation or if dropped (so I've discovered). Rather than buy a new mouse or mouse adapters I grabbed some calipers and got to work in…
Introduction This is a good mechanical mount for the SG90 180 degree plastic micro servo. It is simple to assemble and print!! It can be useful for building your own robot or for some Arduino project!! I offer two model variants, one with…
Wanted to mount my rear view camara for my wolf box dashcam on the outside of my car to replace my rear view mirror as it gives me a far better field of view but didn't want to leave it completely exposed, found a few designs but they…
Las piezas las he probado y funcionan bien. Yo recomiendo imprimirlas al 100% de densidad para que soporten más peso. También imprimirlas al revés para no tener que usar soportes. Tienen un hueco en la zona superior para que entren los…
There are a lot of MG90S servos on AliExpress, but not all are the same. Ive disassembled one with these specific gears (marked in the picture), measured it, and recreated it in CAD.
The hole on the gear is designed to fit the SG90 horn after trimming it so that only the circular portion remains. If needed, you can apply a small amount of super glue between the horn and the gear for a more secure fit.
This is an STL replica of a SG90 servo motor.
Servo splines suck - they're a mess of undocumented, almost-compatible manufacturer specific variants that are too finely featured to print anyway. Instead of trying to match any specific spline geometry I've added some slots so the gear…
This model is free. If you appreciate this model, please leave a download and a like! A simple ring for pan tilt sets from China. The ring supports the servo. This enables stacking multiple sets into a robot arm or lifting bigger sensors.…
Alle Anwendungen und Bewegungen von Servos werden mit diesem System auf einer Größe von 65x37mm ermöglicht: Schwenken, Heben, Schieben und Betätigen. Das Servo (SG90 oder MG90) wird auf der Grundplatte waagerecht mit 2 kleinen Schrauben…
Brabus G900 Rocket Edition
Based on: https://www.printables.com/model/426041-xiegu-g90-adjustable-stand My Xiegu G90 came with 7 fins on the side instead of 5, so I needed thinner fingers in the stand, if you've got one like that, this stand should work for you
Basement for your SG90 servo if you want to place on your desk.
This servo holder is a remix of of a remix. I have remixed it to better accommodate wire routing and organization in an airplane's wing. The larger hole points towards the fuselage with the intention of being able to pull a servo wire…
a small calibration file that lets you calibrate 3 SG servos at once. It also has holes and places for a 2mm nut and bolt Check out my instagram; @Rayz_tech I have also included the cad design if you want to edit this yourself Category:…
Smashed together the two designs to create a 24-tooth gear that is directly attachable to an MG90S servo. This allows for direct-drive of “things” instead of requiring adapters and incurring extra parts and axles. Printed at .1mm (larger…
Handles for an Xiegu G90 radio with the option to add a 120mm fan, power distribution box & 5A USB charger. You can use just the handles by themselves, if desired, as a desk stand. Caveats Please note that these .STL files worked for me,…
Prévoir des supports pour l'impression car les fixations sont “dans le vide”. Ici imprimé en PLA 22 minutes d'impression sur Bambu Lab X1C
I wanted a speaker deflector for my G90 that was low profile enough to fit in a pack and also be the same height as my Ham Gadgets Ultra Pico Keyer, this is what I came up with. No need to take the radio apart for install, but you will…
I created this model because most existing designs didn’t fit the SG90 servos properly — the mounting holes and servo horn clearances were slightly off.
SG90S servo like you get on Aliexpress or Banggood with accurate dimensions. Use as a consruction aid for modeling. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
New design for the MG90S servo motor. Simple construction. Shuts off flow Screw the horn onto the servo and then attach the servo to the housing, insert 4mm outer diameter tubing through the hole and out to the other side. Printed in PLA…
Protective box for Xiegu's CE-19 interface, used for the Xiegu G90 and X5105 HAM radios. Print either bottom or bottom ONLY AF-CON. The latter only has the Radio and AF-CON holes open, the other has all openings. The box is printed so…
Xiegu G90 Faceplate Cover I designed this Xiegu G90 faceplate cover to protect the front knobs and buttons of my G90 while packed for traveling. It remains securely attached by snapping into the OEM side rails of the G90 and pops off…
Designed this to screw to my 2020 rail and fit perfectly against my enclosure panel. Snug fit.
Are you looking to mount a SG90 servo motor on top on Lego Bricks? Here you have solution. Designed to fit and to grab your SG90 motor strongly to you Lego builds. Hope you will enjoy this model as much as I did modeling it. You will find…
This is a compact 3D printed robotic arm designed for hobby robotics, Arduino projects, STEM learning, and servo/stepper motor experimentation. The arm uses 4 SG90-style micro servos for joint and gripper movement, along with a 28BYJ-48…
Design to simulate a microservo sg90 model with openscad code Original model here: https://github.com/vsellier/3d-models/tree/master/
Works with the listed mice to reduce scroll wheel weight. Remove the inner plastic piece from the metal outer of the stock scroll wheel. Remount the inner plastic piece to the printed outer. Hyperscroll should still work, albeit not for…
use a n20 gearmotor in a sg90 servo mounting ...place Category: Robotics
Here Are you seeing , an Gantry Servo Depressor for the Filametrix or the FilamAtrix. This Servo Depressor works with the normal Filametrix or FilamAtrix (CW2 and G2E) Material are needed: 1 x M3 Heatnut 1 x M3 4x3x5 Heatinsert (short…
I wanted to use the servomotors i had at home, and not to buy expensive or specific ones. The model here is the right part, you can use the symmetry function in your slicer for the left one It respects the OC print parameters, with for…
PanTilt for Raspberry pi Camera module (v1/v2) and MG90S servos remixed and edited model optional base for pca9685 included Print body A and B with supports Parts: 2x MG90S servos some extra M2 screws and bolts all the screws from the…
As requested by a Reddit user. Work in progress!
Originally published here: Samsung Galaxy S5 g900 case by tato_713 - Thingiverse A rage-memes design for a rage-memes-era phone. Some of the models are designed for rigid materials and others for flexible ones. The models materials are…
This is a protective cover for the front of the Xiegu G90 that utilizes the H2 accessory (different front rails than stock). It is designed to slide from the top down and to protect the screen, knobs, and top buttons from things falling…
This is a simple model to allow a ball mount adapter to be attached to the OEM mounting bracket of a Wolfbox G900 dashcam. My camera is a G900 Tripro, but this adapter will work for anything that has a 30mm x 30mm hole pattern on the…
Circular adaptor for mounting a Raspberry Pi camera (v1) to the top of a TowerPro SG90 servo on top of a mobile robot. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.4mm Infill: 100% Post-Printing…
This is a simple holder for the lightspeed USB dongle. Should work with any Logitech mouse with the round thingy (i.e. G502) but most useful for G903 which lacks dongle storage. You need to glue two magnets in the holes to make it work.…
Servohalter SG90 mit Clickdeckel. Seht euch auch Typ2 und Typ3 an.
This bracket allows you to mount a DE19 interface to the top rear of a Xiegu G90. You will have to replace 4 of the original M3 screws with M3x8 screws. You'll need to print two brackets one will need to be mirrored in your slicer. I…
Remix of Andy Forsberg's fantastic fish feeder for a classroom deployment. Due to the little fingers and general clumsiness inherent to the primary classroom environment, I figured some slight tweaks were necessary my wish list came down…
This is a horizontal bracket holder for a standard SG90 servo. Version 5 was printed on Creality k1 and fits the servo better. No supports were needed for printing A #2 screw works well for attaching the servo to the bracket. A #4 screw…
MG90S Form Factor This model is designed to match the form factor of the MG90S servo for easy compatibility with standard mounts and RC projects. Details: Width: 12 mm Length: 32.3 mm Height: 28.2 mm Notes: Measurements taken at the…
I liked the dome shape of DL9HAM's Xiegu G90 speaker redirector, and the elegance that it did not need supports to print, but I wanted something less permanent that could be put on/removed easily. Inspired by this clip-on stand, I used a…
To increase grip, wrap a rubber band around the grippers.
Servo mounts compatible with GoPro fasteners. Support is recommended for print. 4 walls thick, or completely solid printing is recommended for optimal durability. Slicing Tolerance: Exclusive & Wall Ordering: Outside To Inside are…
I am 3D printing a life-size R2-D2 and needed to test a bunch of SG90-style micro servos. So I whipped up this test tray. The tray is designed to hold the servos without a load on them. It prints without supports needed. I have 10-servo…
Simple adjustable distance bar for Xiegu G90 with 5 available positions - perfect for stack 2 radios on themselfs !!IMPORTANT!! Make sure your printer doesn't have any issues with elephant foot, because you may have some problems with…
Small valve control using sg90 servo. Useful for any project that requires flow control
Introducing the Xiegu G90 Speaker Redirector, now travel-sized for your convenience! This pint-sized prodigy was designed to hug the G90-H1 bracket like a koala on a eucalyptus tree, but if you're out of brackets, slap some tape on there…
This is a custom-designed scanning mount for the HC-SR04 Ultrasonic Distance Sensor , specifically engineered for obstacle-avoiding robots and Arduino projects. The design consists of two parts: Servo Base: A cylindrical housing designed…
I havent seen many manpacks for the G90 so why not make my own.
I designed this based on the "Mini Track Loader RC" from Zedpi. You can use the lego chain and all the other parts from Zedpi's design ( https://www.thingiverse.com/thing:1000713 ). So it is only slightly larger as the original one from…
Redirects the sound coming out of a G90 towards the operator.
after putting together my dragon burner's filament cutter I realized i needed a way to actuate it, so I searched and found the design by jack miller, but it didn't really fit my needs, by I liked the idea, so I used it as a a base to…
was strugling to find a simple yet effective way to mount a fan to my g90 for digital modes, so decided to make my own very simple and low profile mount adds only the fan thickness, to the radio and 1-2mm more fitment is very very tight…
model for designing, not printing(you can if you want to) tolerance +-0,5mm
A gridfinity 1x1 bin to hold 1 or 2 SG90 servos. I originally designed it to hold 1 servo, and store the cable in the rest of the space, but then realised that I might as well as fixings for a second servo, in case you wanted to mount 2…
Use https://www.mcmaster.com/9452K6/ (Dash 016 Oring) for the BCAR. Use a 10mm tactile switch for easy select fire (optional) or just mount the Encoder on the Riser. You will need to route the encoder and display cables back to the lower…
