Counting matching models…
Bracket for DC motors from the JGA25 37 family. Onshape: https://cad.onshape.com/documents/feb46ee6ddb83e531a195605/w/09a963822244fc31aad22e58/e/a61a4ff87600e5801b61fc7d?renderMode=0&uiState=664de00d90ef4862b8c3456b
Useful to model off of, not perfect but is dimensionally accurate.
Printed in PLA, 0.4mm nozzle, 0.2mm height, 15% infill density, and no supports. Should allow you to read pinouts and wire the board while in case. Can be powered in case. It is a snug fit. I recommend sliding the board into position and…
Designed a case for the Arduino Mega 2560 with a hexagonal pattern, because the ones I found, didn't fit the non-original boards I've got. I Made sure that it'll still fit the original boards. Case should lightly snap together, bottom…
fischertechnik Gear Z20 for ZGB25RP and JGA25-370 DC motors with 4mm D-Axle Category: Robotics
An ORP-Compatible mounting bracket for JGA25-371 DC motors. About ORP ORP (Open Robotic Platform) is an open-source project for developing reusable and user-friendly components for use in hobbyist robotics. By following a set a design…
Motor uchyťte do držáku pomocí svou šroubků se zápustnou hlavou M3x8. Přírubu je nutno na osičku natlačit, může být potřeba použít trochu větší sílu.
fischertechnik Gear 10 for ZGB25RP and JGA25-370 motors Category: Robotics
I just lopped off the left end of Oscar's Arduino slot and the Mega fits right in.
SOPORTE PLACA MEGA2560 LLEVA INGERTOS M3/OD4.2/L7
fischertechnik 4mm Shaft Adaptor for ZGB25RP and JGA25-370 motors. The inner diameter of the shaft adapter is 4.25 mm. Try to print with highest resolution for best fit. Category: Robotics
Housing for JGA25-370 DC motor with centric shaft for fischertechnik The end caps can be used for both the (eccentric) ZGB25RP and (centric) JGA25-370 DC motors. The fischertechnik plugs directly contact the small brass lips on the motor,…
Mega2560 ProMini case M2x6 screws Print Settings Printer: Hephestos2 Rafts: No Supports: No Resolution: 200micron Infill: 20% Category: Electronics
fischertechnik Grooved Block for 4 mm Shaft ZGB25RP & JGA25-370 motors. The inner diameter of the shaft adapter is 4.1 mm. Try to print with highest resolution for best fit. May be secured with a headless 2.5 mm Inbus hex socket screw.…
Battery compartment for the Arduino Mega2560 / DUE board Category: DIY
MKS BASE v1.4 BOX (MEGA2560) CS: Tento model byl vytvořen za účelem updatu staré boxu pro desku, který byl vyroben z akrylového plastu a byl během používání poškozen a poškrábán. Navrhnul jsem ho na hliníkový profil 20x20mm s drážkou 6mm…
Telescope OnStep goto controller Box for Arduino MEGA 2560 with Prototype PCB for Arduino MEGA 2560 R3 Shield Board or CNC 3.0 shield . More info about OnStep goto controller on Howard Dutton project For my version on prototype board -…
This is the YARN WINDER v2 MOTORIZED version adapted for the JGA25-370 motor. In the remix, I added: - GEAR_24 version for the JGA25-370 motor - YARN_Housing_bottom version for the JGA25-370 motor - YARN_Housing_bottom version for the…
I wanted to install the Arduino board on the printer, but I couldn't find a suitable place, that's why I designed this piece. I hope your problem will be solved. First, install on the profile, then install the Arduino board Important note…
Box for Arduino Mega and Ramps shield for 3D printer (Rebel II)
This is for Voron, you need Work with Voron DIM Rail Mount.
A simple wash station made from a 12v DC motor and some other components I had lying around that I bought at AliExpress at some point. The DC motor I bought was the GA25-370 - 280 RPM / 12v, and it does seem plenty fast enough for this.…
This is a mount designed to work with 7.5mm DIN rail from Pheonix Contact. It allows an Arduino to be mounted to the rail with an I1 Interlink Shield from Atlas Scientific inserted. It also has a slot to allow a mount to be installed for…
This is a mount designed to work with 7.5mm DIN rail from Pheonix Contact. It allows an Arduino to be mounted to the rail with an I1 Interlink Shield from Atlas Scientific inserted. It also has a slot to allow a mount to be installed for…
GA25-370 6V motor Complete assembly tyre rim coupler with M3 bolts
For JGA25 motor mounting instead of NEMA17. The JGA25 motor has a different shaft. It cannot be used everywhere. I use it with a https://www.printables.com/cs/model/165025-modular-planetary-gearbox-10241 gearbox to drive the reel from…
