Counting matching models…
Now - here the brand new design of my articulated snake, which is not that spiky anymore. The joints are again improved. I added a the mini snake (also as keychain with 3mm hole) which you can use as a test file before a big print, if…
I do not own this character. BlushCrunch Studio are the creators of Gigi, respecting the rights of the creators. There might be a painted model of Gigi someday for the thumbnail. I procrastinate a lot, sorry about that. Also, I'm just…
Giganotosaurus scanned with revopoint POP3 Plus and printing resin
Since we like the work of the author HR Giger, we decided to create one of his most iconic creations. You can also see this work in all its beauty at the entrance to its museum. sculpt by: Vlado Turek…
A enclosure for the Arduino GIGA R1 WiFi with the Arduino GIGA Display Shield. Made for 4 M3 25mm bolts and 4 M3 nuts. EDIT: Added a version of the case with a built in stand and holes for a shield.
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Made this for orca slicer for 1 print head or 4x print head. just change print bed x for 2 or 3 print head divide 800 by print head count. has pause command for layer height pause for you can change filament. to print from wifi add the ip…
A kit card figurine/sculpture of a giganotosaurus. An adhesive may be required depending on tolerance. I used super glue.
A towering display shelf inspired by biomechanical architecture, this XL Biohorror Wall Shelf brings eerie sci-fi detail to any space. Sculpted in a Giger-style aesthetic, it’s designed to hold figures, masks, or collectibles with…
This is a Giganotosaurus model consisting of 11 parts, capable of limited articulation after assembly. The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot move, it means the…
GIGGA SCRATCHA™: the Rolls-Royce of back scratchers. After trying plenty of back scratchers that were too short, too flimsy, too sharp, or just generally disappointing, I decided to make the one I actually wanted. The result is the Gigga…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Elegoo Orangestorm Giga Enclosure. I printed everything out of PETG material. I used 3/16 dowel pins 1.750 length for connecting the door frames together. I ream the holes out. There is holes in the top frame for dowel pins also but I…
I modified the chpola33 thingiverse model. ( https://www.thingiverse.com/thing:3364149 ) The matchbox designed for Red Roosters Pipe Matches may have different sizes from ordinary boxes. After printing: I sanded the box a bit and "shaded"…
Printed in PETG. 150mm/s. 235 degrees c. No supports or bed adhesion.
This is a PrintInPlace way smaller modification of this model: https://www.prusaprinters.org/de/prints/49007-birth-machine-hr-giger Thx for sharing this in the first place to the David Warboss. I just wanted so have this in one piece in…
This a quick Bed Level test print for the HUGE Elegoo OrangeStorm Giga. I designed it in Shapr3D and it should take about 12 minutes to fully print. I ran the manual leveling, then the auto mesh leveling and this print allows me to see…
This is a 3D model of the Elegoo OrangeStorm Giga in 1:1 scale that you can use to see how this printer might fit inside your house, garage or office. Inside the .zip file are the Augmented Reality files for you Android or iOS devices. I…
Bugati T35 year 1924 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
Sliced version of https://www.thingiverse.com/thing:4098730 file name explanation: First char: A = arm, B = body, H = head, L = leg, W = wing, T = tail second char: L= left, R = right S suffix = spikes Union-ing spikes resulted in failure…
This is a model plate of Giga Chad Giga Chad - Noun The name "GigaChad" indicates that the person is the ultimate Chad The plane should be printed at 100% infill on white filament for the best results, the stand can be printed on anything…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA The Rolls-Royce Phantom I, produced in 1927, was a luxurious and iconic automobile of its time. Here's a brief overview: Introduction: The…
Parts required: Choose the wall mount version or the rebar-cap version. The wall mount version requires: a m4x45 screw a m4 lock nut wood screws to mount to a garden post 2x 5mm OD .5mm wall x 10mm length stainless tube The rebar-cap…
Giganotosaurus z filmu Jurský Svět Nadvláda
Print model IO shield for Gigabyte GA-B320M-S2H
Be persistent like a mosquito, at the end you will get your bite! (Easy to print NO raft or support needed) Feel free to join my YouTube 'Channel if you want to see more of my cool projects or printer reviews https://bit.ly/2NonEXS Print…
This is a simple fan adapter / mounting bracket for mounting a 120mm fan on the original cooler of a Gigabyte MJ11-EC1 mainboard with AMD EPYC Embedded 3151 CPU. With this mod the cooler is whisper quiet and other components (RAM, NVME…
Background: Here is a Magigoo holder for the popular Gridfinity storage system. It's a remix from the 1x1x3 bin and is set up to accept 6mm x 2mm magnets. It utilizes crush-ribs to create a press-like fit to securely hold the Magigoo…
This is a Gridfinity compatible holder for a single bottle of Magigoo. The hole is 30mm in diameter so it'll hold anything else that fits in it too. Its Gridfinity size is ½ height by 1x1. Original Gridfinity design by Zack Freedman…
I started with Dante's IO Shield blank and laid over an image of the IO shield. I converted the layout image to an SVG file and used Tinkercad to cut the port locations into the blank. I got it first try but the IO shield was a tight…
Mini Mount - For single Expansion hub & Control Hub Giga Mount - For REV Expansion hub, Control Hub, battery and switch
Rack mount for cheap 2.5GbE switches with 1 SFP+ port. Use one of the models from the original model to fill in the other side. This includes a backstop and block to hold the power cable. These 2 features require support, but no other…
This is a development stand and enclosure for the Arduino GIGA R1 WIFI and its GIGA Display Shield , based on the basic enclosure provided by Arduino themselves here on Printables . Although I think it is very clever that the GIGA Display…
Hold 30mm glue stick or Magigoo bottle on honeycomb storage wall.
Conversion of the Elegoo OrangeStorm Giga to Bowden with fixed filament sensor Umbau des Elegoo OrangeStorm Giga auf Bowden mit festen Filamentsensor
Here's my proxy model for Gigazaur from the board game, King of Tokyo! I had to separate the head to get it printed because of the teeth, so I included versions with the head attached and without. I put the model on a 50 mm base, which…
This is a model for the Gigabyte GT 1030 (GV-N1030D5-2GL). This is specifically made for the QNAP TS-473A. I used a 0.2mm Nozzle with PETG. I recommend printing this model standing upright and using tree supports for the display output…
Remix of the Enclosure for Arduino GIGA R1 WiFi and GIGA Display Shield with a open back to allow access to IO ports
Spacing in the back is allowing other cables or cables coming from a hole in a Wall. No supports needed.
Whether you're a fan of garden gadgets or looking for a 3d printed garden whirligigs , this 3D printed bee will be a pleasant project to watch when working with the wind. Features: Wind-Powered Movement: Wings spin in the wind, which will…
Another Whirilgig. This time it's Wile E Coyote chasing Roadrunner. I had a lot of trouble with the legs. First, in figuring how they had to twist in order to become propellers and also not hit anything when they rotated. Then, how to do…
Gengar Gigantamax in a Swamp (Pokemon) キョダイマックス ゲンガー MMU Multi colour part design Category: Sculptures
Hang from a fishing swivel for best results- I used a piece of bailing wire down the middle and glued the joints a little. Not sure either of those things are required. I did make this one very large =P Approved by nature~~
This is a holder for a glue stick and Magigoo pen (or large Glue stick) that uses two 15mmx3mm magnets.
Infos, Bilder und Videos findest du unter: https://www.caliheat.de/shop-1/hygigrip/ Update: 01.04.2020 HygiGrip_Schieber_V2 mit mehr Toleranz
There are other versions of this, but this one matches the dimensions of the rest of my rack mounts
Preview model in action: Video presentation and instructions : This is a working model of a whirligig that shows the wind direction and helps the duckie to make the first attempts in the flying craft. Initially I made it more as a proof…
This 3D-printed enclosure is specifically designed for the Arduino GIGA R1 WiFi board together with the official GIGA Display Shield . It consists of a top and bottom shell that are securely fastened using four M3 x 25 mm screws and four…
Gigabyte AORUS logo transfered to STL territory.
Hummingbird Whirligig Edit: 5 July 2020 I have added a "spinner" to the front of the prop hub. It is threaded at 1/4-20 so it will just screw onto the threaded rod main shaft and cover the nut securing the hub. Thanks to SuperTroy for the…
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported. Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density. You'll need two M3x5mm…
This is a whirligig that I had made a few years ago out of wood. I decided to try making it again, this time 3D printing the parts. The Assembly_guide.png file will show how it goes together. Once the model is glued and the hardware…
Easily printable IO Shield for the Gigabyte B450M DS3H motherboard. Even though I had no issues using this IO Shield printed in PLA I would highly recommend going for filaments with a slightly higher melting temperature than PLA like PETG…
Drei-gängiges Ziehkeil-Getriebe Print instructions Ein Drei-gängiges Ziehkeil-Getriebe, drei Gänge schaltbar 3:1/1:1/1:3 Teile einzeln drucken! Ich füge auch noch die Datei im Freecad-Format bei, für die unter Euch die das optimieren oder…
Giggle McDimples(Toy Story)
Rear Io shield for the Gigabyte GA-H97-HD3
Gigantosaurus mini decoración o juguete.
Porsche 550 Spyder 1954 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
Updated V2 with improved stability Material: Prusa PC Blend, Polycarbonate Infill: 100% Support: No Rafts: Yes 15mm outside only
This is my attempt to put togheter the pieces of the HR Guitar by Francesco Orrù for big sized bed printers. If you print and assemble one, tell me about tolerances and we can go from there. Part is approx. 396 x 312mm
For building an enclosure for the Elegoo OrangeStorm Giga, this is to have a front with doors that can magnetically shut. Front panel is made from laser-cut 3mm clear acrylic, used m4 screws and nylock nuts to secure to the printer frame.…
Gigantamax Gengar in a Swamp (Pokemon) キョダイマックス ゲンガー You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures
Hope you like it :) Made in Blender. Category: People Meme https://www.tiktok.com/@mireplica3d/video/7222261953987611910
replacement io shield for A520M DS3H Category: Replacement Parts
A HSW insert that fits the 120ml / 4oz Magigoo bottle I created this model because I wanted to learn how to do the honeycomb-style cylinder pattern, and because I couldn't find an HSW insert that fit the Magigoo glue stick I had. Win-win!…
Tray to store the bed adjustment sheets so they stay flat. Thanks to Uncle Jessy for the inspiration.
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
layer height of 0.2 mm
The V Shape has the perfect length for long papes If you print it at 72% of its original size it fits perfect for short papes :)
A whistle was attached to the button spinner. A string is needed to spin it. Enjoy! Print Settings Printer: Fraxinus 1stGen Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 0%
Giganotosaurus carolinii was one of the largest meat-eating dinosaurs , possibly even bigger than T. rex, but it had a lighter, more slender skull , built for speed rather than crushing power. Sculpted in blender, the model is divided…
An easier to spin and fun to play with version of the amazing Gear Bearing by emmett. Thank by the way! Customized version of https://www.thingiverse.com/thing:53451 Created with Customizer!…
Decided to try my luck at designing an Emergency Spear Point. Based on the Marbles Spear Points, but really made as a Last Ditch Option. Printed them in PETG but harder materials are a better option I may upload a Snap-card Option in the…
pulpo gigante para tener de decoracion muy buen modelo no necesita soportes se imprime rapido
Arduino Giga R1 WiFi model, based on the original Step model from Arduino but with pin headers and labeling Buy it here!
Matching rack ears for 10 inch racks 20% infill, 5 perimeters
This version is normal ATX compatible I/O shield for Gigabyte H110M-H motherboard.
I used to have two 120mm fans attached with zip ties to my GTX1080, resulting in better temperatures while being quieter. I recently upgraded to a RTX3080ti and since I am an owner of a 3D printer by now I made a shroud to fit 3 120mm…
1:36 scale model of a gigantoraptor, a large species of oviraptor. The model features detailed scale and feather texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer…
Another whirligig. This one is an old couple doing laundry the old fashion way. All of the action parts are mirrored so they can be glued together and viewed correctly from either side. They also are printed in relief so painting will be…
Here is my parameter for my 3D Giga Chad : Total time : 4h 50m 1 files Layer height : 0.20 mm Nozzle diameter : 0.40 mm Material : PLA Total weight : 28g Printer type : Anycubic Mega Zero 2.0 Here is the model i use for making it :…
Hey there! Here is a "digigram" packing puzzle I created in Fusion 360. Sizing: The overall size is 136x166mm and the numbers are mostly 69.5mm tall, 39.5mm wide, and 3mm thick Notes: I've only included .STP files because STEP=better,…
Bracket to mount an 92mm fan on the stock cooler on the Gigabyte MJ11-EC1 Mini-ITX server motherboard. Made for M3 threaded inserts, holes are 4,0mm. Uses the stock standoffs to mount on the cooler, those are M3 as well. Countersinks for…
Video of it in action: https://i.imgur.com/TIBUhLD.mp4 UPDATE: I have added a PDF with assembly instructions. This is my attempt at a whirligig / windvane / windmill thingamajig which is modular, meaning that you can swap bits in and out…
GIGGA SCRATCHA™ PET: bring on the belly rubs. The original Gigga Scratcha was built for humans. Then the dog found out, and it has been a hostage situation ever since. So here is the pet edition: a one-piece, 295 mm scratcher with 30…
Shroud for mounting 4010 cooling fan. Use M3 heat inserts.
this dinosaur comes from the movie Jurassic World Dominion
For building an enclosure for the Elegoo OrangeStorm Giga, these parts raise the top of the printer so that a top panel does not impact the gantry and the maximum print volume is unaffected. All parts fit within the build volume of the…
Supporting the Gigabyte 4090 Gaming OC in the NZXT H7 Flow is tricky. The support that came with the GPU did not fit in this case because of the cable cover. I used the 2 threaded extrusions that hold a cable tray on the back of a case to…
english Replaces the broken snapper of the Deuter backpack “Gigant” Recommended thickness: 0.1 mm - 0.15mm Perimeter: 3 Infill: 40 - 60 Material: PETG Fusion 360 file included Update 2026-feb-01 Over time, it has become apparent that the…
Tenda SG105 Gigabit Ethernet Network Switch DIN rail mount You can use standard mounting holes. Lock the nut into the part and tighten the screw so that the network switch is firmly in place. Try a few times. You can also use a drill, for…
TP LINK GS108 Wall Mount Needed a wall mount for my TP link, trying to tidy everything up. Just thought it may be of use to someone else. Simple one piece print. I printed in PETG.
a low profile 4 video output bracket for the gigabyte 1650, there are no 4 output designs only 3 outputs, so I made on Print as densely as possible if possible with PETG or ABS because the low profiles are hotter, check that the screw…
Support piece I made for my Gigabyte Vision 3070 to stop it from sagging. It may work for other GPUs. Default Height between GPU and PSU Shroud is 80.6mm. Default card width is 101mm. Fusion 360 file attached.
This is a replacement bracket I designed for my Gigabyte GeForce GTX 750 Ti GV-N75TOC-2GL . I acquired the card second-hand, and it only had the half-height bracket installed for a SFF PC. I contacted Gigabyte and they (of course) had no…
chickens whirligig revisited. In the year since I first posted my Chickens whirligig, some problems have come up. This is my attempt to fix them. The main problem has been that it takes quite a bit of force to get the whirligig spinning.…
This is a remix of the front signage from the GigaPenguin Tuner Shop. It should be printed at a .2mm height. See screen shot on how to print for multicolors using Prusa Slicer.
bullet baby HR Giger Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 88.08x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual…
