Counting matching models…
The WAGOStation is a fully 3D-printed, wallmounted dispenser and display system for WAGO 221 connectors. Designed to bring structure and style to your workspace, it lets you store, organize, and dispense your connectors with precision and…
Navigation Chair for the DeAgostini Millennium Falcon Hold area. This is a remix of the model by aasmaticsamurai. The file has been cleaned up a little in Fusion 360, rescaled to a larger size to fit the hold area properly and everything…
size with 5cm edge length. 1mm heigth. Define size with slicer. keep height >1mm. 30.12.2022: I added a version 3cm edge and 2mm thickness (easyer to take from print plate)
Navigation Chair for the DeAgostini Millennium Falcon Hold area. This is a remix of the model by aasmaticsamurai. The file has been cleaned up a little in Fusion 360, rescaled to a larger size to fit the hold area properly and everything…
Derived from https://www.thingiverse.com/thing:4551005
👻 GhostyChef – 3D Printed Kitchen Magnet A cute little ghost chef ready to bring some spooky charm to your kitchen! This flat 3D model is designed for easy FDM printing with no supports required and up to 4 color swaps — body, outline,…
you need two wiggle eyes with 8mm diameter and 4 magnets 6x3 and a little string if you want to use them as pendants or zipper
only a sticker for the genius Raspberry Pi 3 Case with Homematic RPI-RF-MOD by uepsi print it - i.e. in multicolor and stick it in your Case
Used the Designer Files to Create this Big Version of the B1 Battle Droid
Toto je tisknutelná skříňová nástavba pro model Praga V3S od Deagostini v měřítku 1:43 nebo pro tento model: https://www.printables.com/model/541730-praga-v3s-143 Soubor STL uvolňuji pod licencí neumožňující prodej. Vytiskněte si ho doma…
youll have to adjust the scaling since every printer is a bit Different Requires a 40 mm x 5 mm x 30 mm O-ring print in sla for best result i suggest 4 to 6 perimeters for extra strength
its my first better desing of somesing so thx for looking in my modell (if you want you can visit my profil or my yt = http://www.youtube.com/@sputnikturbo3 thx for looking in here have a great day
Busto da rilievo fotografico con Autodesk ReCap. In memoria dell'ultimo vero urbanista e progettista di Sanremo. Realizzato da [email protected]
replacement handle for lunch box. Print from heat-resistant material to be dishwasher safe inside holes support recommended
Gridfinity 2x4x4 bin for Knipex 16 95 01 SB right-handed ErgoStrip.
Support for Altaya Disney AudioBooks minis. To fit in a kalax shelf, print 5 of 1-3 + 5 of 2-3. if you use the kallax doors (https://www.printables.com/model/1264555-ikea-kallax-cabinet-doors) print 5* 1-3 and 5* 3-3. Models have to be…
Ich habe einen Legostein in Blender designt, und als STL Datei für Sie hier hinterlegt. Er ist kompatibel mit normalen Lego Steinen, allerdings hält er nicht ganz so fest wie die normalen. Ich hoffe aber Sie haben trotzdem freude an dem…
Print as strong as you can for obvious reasons. I used: 5 perimeters 5 top layers 40% infill filament rosa 3d PC-PBT+15GF
Se trata de un pequeño DIORAMA que representa una cocina preparada para cocer una langosta . Consta de la cazuela con su tapa, el cucharón, la tabla de cortar, el cuchillo y, como no, la langosta. Nota Importante: Todas las piezas se…
I don't have a mask that takes these threads, but I used the same method to create the threads as my NATO set. Please leave a comment if they worked or not for you. Threads based off third image in…
Used the Designer Files to Create this Big Version of the B1 Battle Droid
Since I didn’t want to use 40-year-old LF10 filters in my M10 gas mask, I decided to make an adapter so I could use newer filters with a valid warranty instead. I opted for the NATO standard—STANAG 4155. This model is optimized for the…
How It Works The Ergostring Pick is a high-performance, 1.5mm Extra-Heavy guitar pick optimized for the direct-to-consumer, 3D-print-at-home future. It features an oversized 35mm wide footprint with rounded top "ears" that maximize…
These are for the MangoStar soccer nets from Amazon, they don't sell the replacement pole holders. I had to print the model at 105% scale or the tolerances were too tight, 105% fit better for me even though it was designed to match the…
I need to create a custom attachment for a gas mask and had to model a thread to fit my need. (since i could't repurpose the ones i've found here) The thread turned out quite nice, so i decided to share it. Since its just a thread with…
Toto je tisknutelná skříňová nástavba pro model Praga V3S od Deagostini v měřítku 1:43 nebo pro tento model: https://www.printables.com/model/541730-praga-v3s-143 Soubor STL uvolňuji pod licencí neumožňující prodej. Vytiskněte si ho doma…
I have decided to make in two parts for an easy and faster print. Among Us Gost Printed in PLA, layer height 0.2mm. Colour: 2.4mm Black around: + 0.4mm height Among Us Glass, 3 different scales. I used 95% and fits ok. Printed in PLA,…
I just drew up a quick design in F360. Fit is quite good and the spring tension of the tool keeps it in the holder. I designed it for 3 mm countersunk screws; 2.5 mm should also work fine :)
This is a M36 threaded bolt. You can scale it to the size you need: 133,3% – M48 116,7% – M42 100% – M36 83,3% – M30 66,7% – M24 55,6% – M20 44,4% – M16
Use supports internally if you print it with the GOST threads on the build plate. Otherwise the valve might not work properly. The needle valve (unremixed) was printed with 100% infill.
A real coll and Agresif Demon Sculpt for the Gamefield Printed in PLA Army Prusament 35Min Suportless at 0,2layerhight painted with some Standard school paint Watercolor
Simple stands for Disney audiobook figures by DeAgostini. Print the body and add-on separately and glue them together. Names added in the slicer directly
This custom-designed 3D-printed model offers a practical solution for storing Allen keys or hex keys, specifically designed for the Wiha Ergostar MagicRing Hex Key Set (41979), perfectly fitting into the Ikea Skadis system. Printed with…
youll have to adjust the scaling since every printer is a bit Different Requires a 40 mm x 5 mm x 30 mm O-ring print in sla for best result i suggest 4 to 6 perimeters for extra strength
Hex polička na zeď, zámky mají vůli 0,5mm tisknul jsem to na Ender 3 pro
Support to install a 5" IPS display in place of the original display. First insert the threaded inserts, then screw the LCD with m2.5x6 screws. Remove the original LCD and install the adapter plate into the 4 original holes. Screw the…
A plate to install the Raspberry, a DC/DC converter and a MOSFET. This support installs under the motherboard and does not require any drilling to attach
Ich habe in Fusion360 eine Stabilisierungshilfe für die GoPro entworfen. Den Entwurf möchte ich euch natürlich nicht vorenthalten. Ursprünglich ist das Modell für eine GoPro Hero 4 Black entwickelt, funktioniert aber sicher auch mit…
A motorized bicycle idler wheel designed to fit on a GOST 80029 bearing. Might fit on international 609 bearings, but this is not tested.
This Mangosteen model was made by Revopoint POP—a high accuracy low-cost 3D scanner. If you want to get more models like it, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Print Settings Printer Brand: Creality Printer: Ender 3…
Gridfinity Knipex 7002140 side cutter Seitenschneider. 2x4 grids. Check my other Gridfinity tools https://www.printables.com/@MatthiasHart_2387670
