Counting matching models…
A general purpose hook for Harmony greenhouse (and others) for insertion into aluminum rail. Attach a string to the hook, attach the other end and let it help your plants You may use a plier to turn the hook into position.…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
EN: The plant hanger (spare part no. #700650) for slots in the alluminium construction of the Israeli PALRAM Multiline 6x8 greenhouse. I also prepare 90° rotated version. Printed from PETG with supports. CZ: Háček (číslo dílu #700650) do…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
I made some Parts like hose holders and T-Fittings / T-Reductions for 16mm (1/2'') to 4-5mm hose. Was fun to construct in Freecad and helps me a lot with my greenthumb hobby. Print instructions no supports needed If it does not get…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
In addition to this print, you'll need to eat a couple of boxes of Ferrero Roche. Print supports are required for the Tray! For the Pot Inserts, I printed mine in Spiral/Vase mode using a 0.4mm nozzle with the extrusion width set to 1.0mm…
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant
1 central 4 left 4 right sticks folie
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
EN: The plug for rain gutters of the Israeli PALRAM Multiline 6x8 greenhouse. Printed from PETG "flat" with supports. Greenhouse has rain gutters along the longer sides with outlet on all 4 corners. I joined 2 corner outlets together with…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
These parts are hard to find on the internet and I needed a few. Hope this helps you out, if you have one of these greenhouses.
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
Greenhouse jar Turn your empty jar into a small greenhouse for your growing plant. This model is suitable for pot with a 8.5cm diameter and 7cm height. The model is designed to allow you to easily take off the jar for watering. Cute…
Print approx. €8.17–€9.98 excl. taxPreliminary estimate for PETGSource material: PET
Needed something to keep my grapevine off the aluminium rails in the top of my greenhouse. Simple, but effective. Designed for Juliana Greenhouses, but should work in other greenhouses that uses the same structure (ie. Halls etc). Printed…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Uses an Ikea bell cloche (Morgontidig), to stack on a Chiafrön flower pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have been…
Print approx. €3.26–€3.98 excl. taxPreliminary estimate for one variant
Uses an Ikea bell cloche (Morgontidig), to stack on a Drakfrukt or 4 ¾ Forenlig plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have…
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
Uses an Ikea bell cloche (Morgontidig), to stack on a Gradvis plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have been discontinued.…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
About: The modular construction allows you to adjust the greenhouse to your needs (instructions with dimensions at the end of the text for the greenhouse shown). The combination of wood and 3D printed parts makes this possible. The length…
Introduction This is a concept for greenhouse based upon a geodesic dome using 3D printed articulated joints, PVC pipes, and greenhouse plastic. Unfortunately I don't have the funds at the moment to realize the full concept but the 3D…
Model prints flat requires 2 ea. of ends walls and roof. Assembly glue one end to base then the two walls then the second end. finally the two roof pannels. The benches are not to be glued in so they can be decorated. Video link…
This is our first winter with our small green house. At night, the temperature will go down to the outside temperature (We haven't added heat yet). But during a sunny day, it can be 120F inside! Even when it is only 10F outside. As we are…
Collect rain water from your greenhouse gutters using this hose connector and blind plug! Both parts are provided as left and right variants, so they fit both sides of the greenhouse. Requirements The gutter must be 38 mm wide and 21 mm…
Das “mini Geodesic Dome Gewächshaus” wurde während eines Twitch Streams entworfen, modelliert und aufgebaut. Die Segmente werden mit Hilfe von Rahmen mit PE-Folie bespannt. Danach werden die einzelnen Segmente zusammengesetzt und mit…
Multiple Angles 40mm PVC (and others) Pipe Connectors. I designed them to make a Balls Pool for my sons but you can use them for several projects (Greenhouse, dog's house, etc.). You can easily adjust them to support different diameter…
Tomato hooks for greenhouses. A simple climbing aid for plants in the greenhouse. Much cheaper and more convenient than the planting sticks. Printed in PETG.
A dome that can be used to make a small green house, which can be placed on top of flower pots to help plants sprout. After printing, simply cover the dome in kitchen wrap/plastic foil, and hold it in place with a rubber band placed in…
I was lucky enough to be given a greenhouse from a neighbor who was no longer using it. The T-rail screws that came with the greenhouse, which you use to attach things like strings, had seen better days though. I wasn't very happy with…
Enclosed version of my Gardena Gutter Adapter Water Collector with direct connection to a watering hose. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the…
Greenhouse with special Carrots Mini greenhouse: A special money gift idea. The base is 150 mm long with a width of 120 mm, the total height to the roof is 130 mm. I built this little greenhouse for my girlfriend's birthday because she…
Social Media: https://linktr.ee/storknestprojects Components: about 100 threaded rods - M10 about 300 nuts - M10 about 10 wooden panel boards a roll of 30m x 1,5m greenhouse foil 7 rolls of greenhouse tape (8cm x 15m) Updates: 06.04.2023…
Changelog: ## 2024-04-23 Some adjustments have been made to the assembly instructions I've added some parts that can be used to enlarge the house or add a hatch in the roof New Parts: double_t_part_v1 knob_v1 hinge_v1 t_part_v1 l_part_v1…
The Expandable Greenhouse protects your seedlings. Printed in as a series of panels, this greenhouse can be as tall or short as you need. Assembly required. Use super glue to join the panels. The panels are covered in insulating window…
I've printed it with PETG 4 Shells 15% infill
Update: New enclosed remix with added lid and less supports The print i did in PLA held up well since some month. Going to print a PETG one next year. It might friction stick in between the ends of the aluminum gutter of pictured…
Plant holder / Attachment eye . Insert the plant holder into the aluminum frame of your greenhouse and twist it 90°. Attach any string or wire for plat support. No supports needed when printing and prints well in PETG.
Working on this for my greenhouse. Still a work in progress. If you print it, give me feedback, its my first custom file
the parkside mini greenhouse comes with one time use seed starter tray, these elements can be reused. no supports needed
Received a new greenhouse via gumtree, my old design for a downpipe on that greenhouse was way to big for my new one. So created a new one and here it is. Included files are a 'plate' to print two endstops and a downpipe, then single…
Greenhouse film/tarp clip retainer for 36.8mm diameter pipe. I made this to put greenhouse film over my “shelterlogic” type portable garage shed. It works for 36.8mm diameter pipe. If you need one for different diameter, ask me so that I…
Original Reddit Post IMPORTANT NOTES If you have a large enough print bed to scale all the models up to 115%, I'd highly recommend doing so, since the pillar details don't print at the scale at 100%. Everything is designed to fit on the…
Enclosed version of my Gardena Gutter Adapter Water Collector. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the adapter off when moved. Print slowly…
Different size storage boxes that mount to the aluminium rails in the greenhouse. No screws required. PETG or Nylon should work fine, I chose Nylon for mine. Use tree support. The bigger box has an additional notch so it can sit center in…
Set of connector hubs for creation 2 frequency geodesic dome yurt. I designed it as a shelter for my daughter, (yeah I could use couple of chairs and blanket but I wanted to try something new :) ) Dome is usable also as a small foil…
OD: 3.75" The Hex Guard Window Exhaust Adapter is a highly versatile and practical accessory designed to address your specific ventilation needs. This innovative adapter empowers you to seamlessly connect your ducting to a window,…
This design is part of my Mushroom Grow Tent (Martha Project). https://www.printables.com/de/model/968799-300-grow-tent-for-mushrooms-overview ------------------------- ◾ 2023-12-23: Update your Martha with an even further optimized air…
UPDATE (05/10/2020): Added new files for the dome roof to be able to customize the width of the greenhouse: Small: DomeRoof_Arc_50mm_Left DomeRoof_Arc_50mm_Right Minimum Width: 50mm (just one half of roof dome) or 100mm using the two…
Designed to fit 1.5mm-1.7mm acrylic (I had a bunch lying around). Simply apply superglue in the slots and insert your acrylic. Recommend doing a dry fit first to complete your final design before gluing. Best to print with PETG for UV…
A small Geodesic Dome with 18cm diameter as a greenhouse for a micro garden or other cover. There is additionally also a variant from the frame without walls. The closed variant has a "print in place" flap on the roof. The models are…
This is a 3D design of a greenhouse gutter water outlet.
OD: 5.75" The Hex Guard Window Exhaust Adapter is a highly versatile and practical accessory designed to address your specific ventilation needs. This innovative adapter empowers you to seamlessly connect your ducting to a window,…
This kit includes 3 pieces for 16 mm PVC pipes: 90 degree corner Plastic clamp for attaching plastic film Plastic clamp with a small handle for easy release None of the part need support when printing. Originally designed to enclose my…
Greenhouse jar mk3 Turn your empty jar into a small greenhouse for your growing plant. This model is suitable for pot with a 8.5cm diameter and 7cm height. The model is designed to allow you to easily take off the jar for watering. This…
A GreenHouse for seedlings. A box with room for nine pots. If you water a pot too much the water will spread to its neighbouring pots. Print instructions Printable for the Prusa Mini, maximum 180x180mm Printed with PETG. It can get quite…
Greenhouse Outdoor Pole Clip Ø 10/12/13mm - Molletta fermateli serra da esterni Greenhouse Film Clear Polythene Plastic Sheeting Garden DIY Material Cover Greenhouse Roof Resize to adjust dimension If you download/enjoyed this file,…
This contains various parts I've created while maintaining my own greenhouse which I have on an allotment. All of these have been designed to my specific greenhouse, but there are many variations in greenhouse out there, so you may need…
For attaching things to your greenhouse rail
A set of parts for creating a mini greenhouse. The original size of the parts is intended for tubes with a diameter of 16 mm. In the title picture, the length of all the tubes is 500 mm, while the width of the greenhouse is approximately…
Hello, Here is my entry for the PET bottle recycling contest. The idea came to me because we are in the spring and the planting begins. this object allows easy opening for watering and an adjustable ventilation. I adapted the model…
Introducing a set of 4 reusable elements that can be used to construct mini greenhouses of any size for your plants. These parts can be 3D-printed and assembled into desired shapes. To create a humid environment for your plants, wrap the…
Pipe connector for garden hoops. Base is overflow pipe 21.5mm Hoop is using 20mm MDPE pipe.
Easy to print plant holder. Insert the plant holder into the aluminum profile of your greenhouse and attach any string or wire. Printing Instructions No supports needed.
Over the years, I've built several versions of temporary, cold-weather greenhouses out of PVC pipe and plastic sheeting. This year was no exception, but I did make some improvements this time around. With a piece of PVC pipe and two of…
update 2025.0516 added OpenSCAD file update 2025.0513 added 23.3-corner3_roof_45.3mf This part is needed to build 45° angles roofs DIY broomstick greenhouse For indoor / outdoor usage This is an ongoing build process. The 12 connectors…
Work in progress. You may need a lot of time to file/trim to make everything fit. This is more of an inspiration for you instead of a print-and-play model. Good luck. I used Vevor 2x4 feet 8mm thick panels. Two panels is enough for entire…
Cute handles for the Rudsta wide cabinet from Ikea. I used a small piece of cardstock as support instead of using supports for the handle opening. *Handles are even, my cabinet doors are not. :D Set a pause to lay down card stock as…
Printable greenhouse gutter adapter to capture water via a standard hosepipe. There is a complete STL and two split STL's for both the down pipe and end plug parts. Hopefully this will be of use to some one. Just remember you need to…
Either you have broken original part or realised how rubbish original slider, this should be ultimate fix. In case your greenhouse is different please post your remix, I've included Sketchup file. Printed in Filamentive recycled rPLA and…
Simple pots for seed starting. I also added a frame so you can stretch the film and create a greenhouse.
Over time the gutter endstop and downpipe fittings for my older B&Q aluminium greenhouse had expired with a combination of age and the effects of sunlight. I wasn't able to find a suitable alternative that fitted the gutters, and original…
3D printed mini greenhouse Needs: Kitgen foil 3mm Skewers (Google translate ¯_(ツ)_/¯)
My greenhouse door was knocked out last year by a storm. The replacement plastic part was too expensive for 4 grams of plastic, so I remade one from scratch that is better than original. Some parts are reinforced in comparison to the…
This is simple clip to tie down your plants in greenhouse without any knots. It also allows you to easily adjust tension as well without using knots. The line where this is intended to be used is 3.4 mm in diameter and plants are tied…
I bought a cheap plastic greenhouse and needed to ventilate it so I designed this 2 piece vent. It should work well on most materials upto about 8mm thick such as plywood, corflute, card, plastic, etc. The holes are 4mm and I used brass…
My Kids have a small greenhouse made for Galileo Nature (ProSieben) by Clementoni, which was in need for additional plant pots. So, I designed two different pots for additional places in the greenhouse. In German: Das von Galileo Nature…
I designed this model to replace the trim that holds corrugated plastic panels in the frame of our greenhouse. We were given an old greenhouse, and I was unable to find the correct parts. Now I can create them! Recommended print settings:…
three part air vent for greenhouse use. Print all pieces on 0.2 mm fast preset on prusaslicer. Parts click together and is then glued to the 50 mm hole in the (plexi)glass of the greenhouse.
This greenhouse is a factice lantern. It is designed for mini flour, mini succulent, ... All parts are assembled with glue; there is no screw or nut. The door is just clipped to stay closed. Each side (Back, Left, Right and Door) has a…
Attach a garden hose to it to direct rain water into a water butt. includes screen to proven debris blocking hose. includes end cap to block off opposite end of gutter. Note: this is an old design that i no longer have any photos of it in…
I maked these hooks to support hanging plants, like tomatoes, in our greenhouse. There are 3 different lengths: 136 mm, 188 mm, 240 mm I got the inspiration from a design I saw on facebook, but the original design did not work for me, so…
I used the metal frame from a “Harbor Freight portable garage” 10' x 17' to build a greenhouse. I used about 100 of these clamps to hold the 6 mil greenhouse plastic onto that frame. They are spaced about 1' apart. One or two zip ties…
Gutter end for a plastic/polycarbonate 8x6 greenhouse. The greenhouse never came with the fittings for diverting the water into a waterbutt so used Fusion 360 to design ones that fitted perfectly. Ive included the fusion files in case you…
Calling all Gardeners and there, fellow rainwater wranglers! Are you ready to dive headfirst into the grand adventure of DIY rainwater collection? Imagine yourself in your lush greenhouse, surrounded by a symphony of raindrops and the…
(This is a work in progress please see instructions here:) https://www.printables.com/model/62627-diy-greenhouse-by-kms (EU-Sizes) I will focus on publishing the parts for the size US 4x2 for now. groundspike added 7/4/2023 Roofpart…
Looking for a small parts tray/bin. This simply hooks into the greenhouse rail support. Not overlarge but large enough to store your bits and bobs within the greenhouse. Add more storage today. Print Settings Printer: Da Vinci Jr 1.0…
Vitavia Target 2500/3800/5000 greenhouse panes holders. Item No. 1301, 1302, 1303. The original broke after 5 years.
Greenhouse jar mk2 Turn your empty jar into a small greenhouse for your growing plant. This model is suitable for pot with a 8.5cm diameter and 7cm height. The model is designed to allow you to easily take off the jar for watering. This…
Grow some things! This is the 3D model of the tiny greenhouse I use to grow my chilies and other stuff that needs to germinate warm. It fits 9 of the small coconut fiber growing pads and is very compact. It also fits on top of most mini…
Mini Greenhouse Lid – Transparent Plexi Cover (Remix) I found a great seed-starting tray model with small pots and decided to turn it into a fully enclosed mini greenhouse. I designed a matching top frame that holds transparent plexiglass…
These are clips for attaching Bubble Wrap to the inside of a greenhouse for insulation purposes. The stud fits into the channelling (a Halls brand in my case) then press the bubble wrap over it and fasten in place with a clip. The long…
Just another box that can be held up by the alu frame.
Rainwater is the best water for your plants. It's lime-free, chlorine-free and free to boot! To collect and drain it where it is needed, simply attach this adapter. To collect and drain rainwater from the greenhouse was never easier, all…
If you like what I do here, come visit my Facebook group. 3D printed Grow Tools & Accesories - free .stl MX_creations proudly presents : “The Frame” - the most powerful replacement for broken corner pieces "The Lift" - offers the option…
This combination of a hammerheadscrew and nut let's you fix hooks into the extrusion profiles of your greenhouse. That way you can tie lines to support e.g. tomato plants which like to “climb”.
As the original clips for fixing the side panels of the greenhouse broke on install really easy, I tried to make a simple replacement. It is a tight fit, but it works so hope it's useful to others as well. I printed it in PETG lying down…
Conectors for mini Greenhouse using the plastic cover from natcare. Realistcly this will be a reap off of what they do but I believe this will not be as structural weak and plus I think I like the aestethic better.
This greenhouse was designed as a way to keep my cat out of my ClickandGrow tomato plants. It is very affective at doing so, but is also a great décor item and functional greenhouse as well. This greenhouse should work for most indoor…
Corners for assembling a small greenhouse for growing vegetables. For the construction were used wooden laths from Hornbach 13x15x200 mm. The outside corners are also used to prevent the foil from being damaged.
Works with Halls greenhouse aluminium frame.
Simple shelf for my greenhouse, I used the following greenhouse clips to attach it: https://www.amazon.de/dp/B071P72L1K/ Due to the heat in the greenhouse, you should use a temperature-resistant material. I am currently testing PETG.…
20/09/2026 Update: Splited screw for horizontal print, following NooB_LEader 's experience. Hello, I bought a greenhouse but it had no adjustment for ventilation, so I made this adaptable system. If it's useful to you too, that's cool.…
Look at the pictures to see if its fits for your greenhouse or scale it to your needs. Print with a more infill to make it rigid. Dies ist ein Clip, um Gewächshaustüren zusammen zu halten. Die Türen sind somit fest, winddichter und leiser.
Cute handles for the Rudsta wide cabinet from Ikea. I used a small piece of cardstock as support instead of using supports for the handle opening. *Handles are even, my cabinet doors are not. :D Set a pause to lay down card stock as…
Gutter size 38mm-22mm pipe diameter - 14.5mm
