Counting matching models…
Update due to a review posted - Please be aware you are adding 50ish mm to the top of the printer with this vented riser, the existing spool holder will not work with this model and it wasn't designed to be used with the stock spool…
$100 for velocity stacks. No thanks. These will fit all Challenger models from the SXT to the Demon as long as they don't have the light tubes installed. On some models, you'll need to reach in behind the headlight and push in the 3 clips…
How To Edit Create an OnShape account if you don't already have one. This will be required to edit parameters. Log in to OnShape Open this project:…
On my converted Ender 3 Switchwire I was having lots of vibrational noises coming from the controller fan on my printer; especially in comparisons to fans on my Voron Trident. Plus I wanted to add a fan cover also. So I modified the grill…
Middle Fan Support with mesh The mesh parts are made to snap in, but i added a tiny drop of CA-glue on the backside in some spots to make sure they stay in place. Print the mesh with 0 bottom/top layers, 2 perimeters & 20% honeycomb…
The Air Handler System - Fans and Grills - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have…
Main Page: Kibo K1 Since the draft Stage of the K1 case, i wanted customizable features integrated into the design. Aside from custom Sidepanels , the Grills and Feet are next to be modified. The following designs are split into two…
Introducing a 3D printed hook specifically designed for the new IKEA GRILLSKÄR back panel, taking your outdoor kitchen organization to the next level. While the panel comes with a two hooks, the need for additional hooks might be needed…
I didn't want the included mesh top panel to restrict exhaust airflow so much, so I made this Cooler Master NR200/p top panel hardware to allow external fan grills to be installed to the top of the case when the mesh is removed. This can…
Added second body to the grill models in order to follow eddietheengineer's method for configuring an accent mesh in the slicer. Here is the reference video. FYI There seems to be an issue with the original models where Prusa Slicer will…
I wanted to have 2x 6020 fans for the underside so I created these remixes from the Ender Switchwire github.
these are replacement covers for the front speakers. These are known to break and are NLA from Mazda. The covers ARE different between the drivers and passengers side. also remember to print these in a high temp plastic like ABS, PETG, or…
After numerous attempts to print these fan housings without the second layer stringing off the print due to the edge profile I gave up and removed the edge. I don't really see any need for such a small contour and now I can print it…
Halter für Napoleon Grillspieß. Mehr gibt es eigentlich nicht zu sagen :-) ---------------------------------------------------------------------------------------------- Holder for Napoleon barbecue skewer. There is really nothing more to…
Here's a fan shroud for the electronics panel of your Ender 3 NG v1.2 that is built to support fan grills! To build this model, you'll need these 60 mm fan grills . Add eight M3 heat set inserts (from the Ender 3 NG v1.2 BOM), slip the…
This should be a set of grills for the entire Coolermaster range featuring the Coolermaster logo. Variations in angled and small versions. For Atmos II 240 and 360 and for 80mm, 120mm and 140mm standard designs. Parameteric Fusion 360…
All Front_Body_Diffuser STLs are printable in dual‑tone with a filament swap (M600).
1/35 replacement for original plastic engine grills. Tested only on Academy 35015 and worked fine
Dishwashers Cutlery grills measurements 229x118x150 without Grip(130 without top) (90,5mm Grip Height) Category: Kitchen & Dining
replacement vents for the smaller defroster vents on the dashboard.
A growing collection of fan grills I make for fun. Designed in FreeCAD.
This is a magnetic fan grill with a dust filter to prevent buildup of dust in the electronics compartment of Voron printers (or anything else). The magnets make these very maintenance friendly; when too much dust has accumulated on the…
This is a collection of fan grills I used in multiple projects. They print well with support and are bulged outward, or convex, to make them more sturdy. The disadvantage of this is that you have to remove support structures before using…
replacement large defrost grills that mount in the dash board.
It's just my idea to cover my new active speakers which many many DJ's are using all around the world. 4mm holes need to be drilled on the speakers, so the grills to be placed and glued. Or maybe you can make your own style to place them.…
Grills: Loneliness 120 cm, 140 cm, 200 cm
This spacer is designed specifically for Modhouse Tungsten headphones. By default, the Tungsten’s grills are concave by approximately 1.8 mm, with the outer grill border protruding from the headphone body. This spacer installs between the…
Update 04/06/20 - Used this for the first time last night making some steaks and got the grill up to 450. Handled worked fine and didn't seem to be a problem on the first use. I've had my Vision Grills Kamado grill for a number of years…
Edit: I needed to reprint this in PETG as the bottom of the PLA+ started to warp from the heat of the build plate. I strongly recommend using PETG or better. This is a Remix of both Schnabulation's and SLcoolK's remix. I needed slightly…
Der Aussendurchmesser beträgt 42mm, die Höhe 11mm (Möbelfuss-Kunststoffteil ist 8mm hoch). Der Möbelfuss kann hineingedrückt werden. Bei mir ist kein Kleben notwendig, der Möbelfuss lässt sich mit dem Adapter gut drehen und damit in der…
This is a mount for the Ikea Grillskar backing board mount for the NoClogger tool. Features a tip with a ridge to prevent the tool from slipping off the mount. See more on the NoClogger below: NoClogger - Amazon.com The Must-Have 3D…
Bought a new Aqua One Regency 220 tank from a local pet shop and soon realised that my small swordtails could easily find there way into the overflow, so I needed something to stop them. These grills did the job quite nicely. They simply…
Bei meinem Grillspieß der Firma Enders war die Laufbuchse am Motor defekt. Habe die Laufbuchse nachgezeichnet und aus PLA gedruckt. Sie hat eine Stunde grillen überlebt aber ich würde zur Sicherheit ein Hitzebeständigeres Material…
I designed this fan grill to complement my Reaper toolhead build. It is designed for 50mm fans such as the 5015 but can be scaled for other sizes.
The compatibility list on the FireBoard site makes it clear that the OKJ pellet smokers are not the best fit for the Pellet Drive even though many use the same standard main components as brands FireBoard does support. The main issue is…
Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…
Hifiman HE400SE hexagonal grills, heavily inspired by the Custom Cans Super Grills . Modeled from scratch with a less dense hex pattern, purely based on personal preference. I would recommend printing them face down, they should easily…
Scaled down adaptation of Noctuas High-efficiency fan grills for Voron V2/Trident skirt fans
its a stock voron Stealthburner in terms of functionality the only modifications I have made are the fan grills and the pattern on the front face to make it look unique
Use walls and infill to your advantage for customization. Don't forget to remove bottom/top layers!
Trick or treat! Got a 120mm fan (PC case fan?) that needs decorating for Halloween? OF COURSE YOU DO. Who doesn't? So download and print these lovely fan grills and spook up your fans! I remixed a model by @pfmike so that I'd have a good…
IF YOU DON'T HAVE A PRINTER You can purchase printed grills via Portals (international shipping availible). Let me know if you'd like to see different mesh design for sale at portals. I don't sell anywhere else. Voronoy Design, No logo -…
A simple design to keep the door shut for the Ikea Grillskar unit. PETG recommended for outdoor use.
This is a snap-fit mount to place the Ikea Grillskär door magnets at the top frame instead of the middle shelf. Printing tips Print it laying on its side 0.2mm layer height 2 perimeters PETG recommended Other parts needed Original Ikea…
Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…
HARDWARE Q.ty FHC M3 [probably longer than stock] flat head screws for the axial fan. Using these to fit clearances. 4x Standard screws for 5015 fan. 2x M3 Nylon Lock Nut if using one-screw mount for the 5015 fan. 4x Print Instructions…
Unfortunately, all I have retained is the GCode for an Ender3Pro. If you are savvy to recode it for yours please do. If not, I will print for you!
I have been converting my Ender 6 into a Trident, during this I have modified the Trident skirts to allow fitment to the Ender 6 frame, this requires the corner pieces from the original trident skirt files and also the side fan mountings…
Fan grill for Prusa MK4 hot end to protec fan. Printed with PLA 0.2mm resolution, infill 20%, support on printbed but only with 30 degree overhang angle. Two stiles available - simple grill version and prusa hex.
I recommend you print this in a strong/flexible material like petg. It does benefit from a tiny amount of support for the round bit but it's not a necessity
Two different styles of 120mm fan grills made with 3D printed frame parts and 1/16" diameter brass rod/wire. There are outer fan frames that mount to the hole pattern for mounting a 140mm fan. The round inserts have holes for the 1/16"…
I don't think there is much need for a description here. I like the use of a holographic PEY plate for these, just to fancy them up a bit.
grill or wall art fancover 140 mm fancover 120 mm
It is important to let the print cool down properly so that it is not damaged during removal.
