Counting matching models…
A simple cover for the SAGROTAN soap dispenser. By the way, you can find a shelf for wall mounting in my 3D models . IMPORTANT: YOU ARE NOT ALLOWED TO USE MY DATA FOR COMMERCIAL PURPOSE (E.G. for your ETSY or EBAY) WITHOUT MY CONCENT.…
A new version with a different thread and some fixes. If the outer diameter of your outlet is 12.2mm (the part without the thread) this should work. Do not use much pressure on the bag, First gently squeeze the container to get some air…
Very simple and easy refill-adapter for Sagrotan/Dettol NoTouch soap. no drilling or adding parts to the container needed – the soap container stays unchanged. Simply install the Adapter to the refill bag. It fits the 12,3 mm thread of…
The amount of soap the donor gave me was too much. So I reduced the stroke of the built-in cylinder by bringing the crankshaft bolt closer to the center. In addition the adapter. There is no reason to disturb the electronics! History:…
Layer 0,13 - 0,15 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.15 Infill: 20% Filament: PLA Matt Weis Notes: Layer 0,13 - 0,15 Kategorie: Badezimmer
Einfach bei der Sagrotan-Flasche oben ein Loch reinsägen, Deckel aufkleben und mit dem Verschlussdeckel verschliessen. So spart man viel Geld :-) Verschluss benötigt Support.
This terrifying bust depicts a rotting cybernetic zombie, with decayed skin, exposed bone structure, and biomechanical implants fused into its skull. Designed with extreme detail, it captures the essence of sci-fi horror and grotesque…
Home made Grot Tanks for WH40K. My own designs. You can modular some designs.
Here it is! The shelf you've been looking for to secure your SAGROTAN no touch next to your washbasin. You have three options. What all options have in common is the dovetail wall bracket, which should be attached to the wall with either…
This replacement gear has a smaller rotation radius for the pin that moves the soap pump. I reduced the radius to 3.1 mm. After the modification the soap lasts for a very long time compared to the original gear. For easier printing the…
Zlin Agroturbo 1100 Version 1.0 (12.11.2023) Wingspan: ca. 1100 mm Body length: ca. 750 mm Take-off weight: ca. 550 - 650 g Motor: Brushless Motor 28mm Durchmesser (2200kV) ESC: 30A brushless-ESC Propeller: 7*5 ‘’ Battery: 3s Lipo 800 -…
Home made Grot Tanks for WH40K. My own designs. You can modular some designs.
Wollte einen Deckel den man nicht kleben muss. Einfach mittig ein Loch (Durchmesser 20mm) bohren und aufstecken. Drucktipps: PLA Perimeters: 3 20% infill keine Supports nötig!!
Drawn and printed my little one a soap dispenser holder for the Sagrotan. The dispenser base is inserted first and can thus no longer slip out. Then you can put the soap bottle on top. As adhesive tape I used the see link. The holder and…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I used Klexer's model , but I always had to remove the soap…
SAGROTAN Seifenspender Verschluss-Stoppel um selbst Seife nachfüllen zu können. Kann natürlich auch für andere Seifenspender verwendet werden. Es muss dazu nur ein Loch in den Seifenbehälter gebohrt werden. Stoppel rein. Fertig.
Im Bad hatte ich zwei Bohrungen im Abstand von 2,7cm, die mich irgendwie immer geärgert haben und einen Seifenspender der beim putzen immer im Weg steht. Also überlegte ich, wie ich beides zufriedenstellend beheben kann. Herausgekommen…
Home made Grot Tanks for WH40K. My own designs. You can modular some designs.
Hello Tribe, I made up a Grot Army artillery tank and if you would like the whole set please visit https://thangs.com/The-Free-Heathen-Workshop/FHW-Mining-Car-Tank-set-v1-multipieceobj-25746 Cheers Maker Millwright Category: Vehicles
Einfacher Wandhalter für einen Sagrotan no touch Seifenspender. Zum Kleben an die Wand habe ich das hier verwendet UHU 45450 Doppel-Strips Extrem, 4 kg, 26 mm x 31 mm, 16 Stück…
Easy to print! Just print it upside down with your favorite filament and enjoy the maritime look. I have adjusted the model so that it can be printed seamlessly in a single color while remaining a single file/body. However, it is still…
The idea is simple - just print the 2 parts. The first insert screws into a 20 mm hole that you drill into the top of the empty container. I would recommend to glue it in with some super glue or 5 minute epoxy to secure and seal the fit.…
This way you customize the last Dettol/Sagrotan refill unit you'd be buying, into a truly unlimited refill. Also, you reduce plastic waste in long term. You can then freely refill it with any of the liquid soaps that you would buy in bulk…
A holder for the Sagrotan No Touch soap dispenser. There is a stand and a wall mount. Both have the option of a small drip tray. The wall mount is hidden behind the holder which slides on the tapered dovetail. For the mount there is a…
est très jolis imprimer en noir.
Credit to the excellent Gumilar on Fiverr , who design the model for me off of the images from our design team. STL will need rotating in PrusaSlicer to sit upright. Print with supports.
“reduce, reuse, recycle” Verschlussstopfen für gebohrtes 10mm Loch. Macht den Seifenspender nachhaltig nachfüllbar. Schont die Umwelt, spart Plastik und Geld. Looks nice with Prusament Crystal PETG *Anwendung auf eigene Gefahr,…
The Sagrotan/Dettol soap dispensers are very simple contraptions inside. In effect, a single cog determines how much soap is pulled/pushed by the moving piston. Originally, the cog moving the piston has a pin that is offset by 6mm,…
Want to save money on your Sagrotan soap refill? Just drill a hole into the top of the original soap container to use cheaper refill soap. 3D print the provided plug in TPU to tightly seal the hole. I used a step drill to drill a 18mm…
Hello Tribe, This is a the simple print design of the Mining Car Tank, I hope you enjoy it. If you would like the EZ Print eversion please visit https://thangs.com/The-Free-Heathen-Workshop/FHW-Mining-Car-Tank-v12-ez-print-25089 Cheers…
Deckel für No-Touch Nachfüller. Einfach Loch in den Nachfüller und Deckel drauf.
A Holder for the Sagrotan / Dettol No Touch Soap Dispenser. There are two models for mounting or placing: One for mounting (glue) / placing with a soap tray and one without a soap tray. One for screwing with a soap tray and one without a…
Ich habe für den Seifenspender von Sagrotan eine simple Halterung designed. Es gibt zwei Varianten, eine zum Kleben und eine zum Schrauben. Druck ohne Supports mit ca 10% Infill hat bei mir prima geklappt I designed a holder for…
Wall mount for the Sagrotan No Touch soap dispenser. While the mounting plate that is permanently attached to the wall, the holder can be easily removed for cleaning and be re-attached.
Housing for Sagrotan No-Touch Dispensor. So that the case doesn't look too big, I designed it so that the No-Touch only fits in WITHOUT the battery cover. Printed without supports on Prusa mk4 and Prusa XL.
I made this model a few years ago with photogrammertry software, I can't remember what software it was though.
Der Sagrotan Verschluss besteht aus dem Stöpsel und dem Grundteil damit er auch verschraubt werden kann. Eine Schablone ist auch dabei (zuerst 16mm Loch bohren) danach Schablone drauf und damit die 5mm Bohrung machen. Den Deckel hab ich…
Recreation of the long out of production Rebel Grot Cutta model. First try at something like this, really happy with how it turned out. I drew the chassi in paint.net and then extruded them to make the basis of the chassi, cleaned that up…
🌱 Nachhaltiger Verschluss für Sagrotan "no touch" Flaschen 🌱 Mit diesem innovativen Verschluss für die Sagrotan "no touch" Flaschen ist es möglich, die vorhandene Flasche einfach und nachhaltig wiederzuverwenden. Der ökologische Aspekt 🌍…
Raouche rock in Beirut, Lebanon More accurate details and fixed lower layers to my original model
If you have ever been to Disneyland in California, then you most likely have seen these marble statues that were given to Walt as a gift in the 1960's. They have been on display ever since and are located in a small entrance to…
I've printed Grot on Prusa XL. Test print was from PETG but I prefer PLA. I can recommend following Prusaments Galaxy Black Azure Blue Prusa Orange Oh My Gold - Blend
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I recommend printing from some more weather-proof material then PLA, like PET-G. Printed with army green PET-G from Nebula with at least 3 walls, 3 top and 3 bottom layers, 40% infill. I did not use supports, but some slicers will suggest…
If you have ever been to Disneyland in California, then you most likely have seen these marble statues that were given to Walt as a gift in the 1960's. They have been on display ever since and are located in a small entrance to…
I designed a simple filler neck for filling soap for the Sagrotan soap dispenser. You only have to drill a 12mm hole and you can click in the socket with a little pressure. Print the parts with a 0.08mm layer height to ensure the…
Well, it's an ugly hack-job, but I think it'll work for a grot kannon krewman. I scaled the model down slightly and added a grot head. This loader would go great with Redstarkits's Ork Lobba: https://www.thingiverse.com/thing:3806829/…
I remixed the awesome model by joe712 by adding a version without screw holes if you want to glue the dispenser to the wall with e.g. mirror tape. You have to print at least one version of the mount and the drip cup. Best part is still…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Don't throw your money on expensive refill items and enable you to refill using unbranded soap instead by drilling one arbitrary sized hole and after refilling cover it with this lid.
🌱 Sustainable Closure for Sagrotan "no touch" Bottles 🌱 This innovative closure for Sagrotan "no touch" bottles allows for the simple and sustainable reuse of existing bottles. The ecological aspect 🌍 was at the forefront of product…
My take on the greatest galactic gobbo. I incorporated a Ghazzy banner from 2nd Edition, from back when I first started playing miniatures! You'll definitely want to print this guy in resin. I've included a pre-supported version.
Design Concept These gargoyle figures are inspired by the legendary creatures of Notre Dame, designed to add a unique touch to a Lego Notre Dame model (based on my child's request). Each figure carries intricate details to reflect the…
Flower Children of the Peach Spring Grotto Ceremony Bas Relief Plaque.
If you have ever been to Disneyland in California, then you most likely have seen these marble statues that were given to Walt as a gift in the 1960's. They have been on display ever since and are located in a small entrance to…
If you have ever been to Disneyland in California, then you most likely have seen these marble statues that were given to Walt as a gift in the 1960's. They have been on display ever since and are located in a small entrance to…
A small lifehack to be able to fill up your Sagrotan No-Touch soap. Drill a hole on the top of the bottle with a 10mm drill bit Insert the bottom part until you hear a click Insert the top part into the bottom part Now I only had a 10mm…
Small, cowardly, and perpetually greased up, these grots are the unsung, expendable heroes keeping this rolling catastrophe in motion. They’re the tool carriers, the test subjects for fatal inventions, and - most importantly - the living…
This is a table mat that fits the original sagrotan soap dispensers. I designed it in a way, that it fits perfectly to the corners of our sink in the kitchen. With it the dispenser stays in place, does not slip around or wobbles on the…
If you have ever been to Disneyland in California, then you most likely have seen these marble statues that were given to Walt as a gift in the 1960's. They have been on display ever since and are located in a small entrance to…
Sagrotan Samt Schaum Pumpkopf
Another grotto statue from the snow white grotto in Disneyland. This time it's Sleepy. If you have ever been to Disneyland in California, then you most likely have seen these marble statues that were given to Walt as a gift in the 1960s.…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
To save some space, I designed a small pedestal so that the Sagrotan No Touch soap dispenser can stand on the edge of the sink. The width of the sink edge is 36 mm, and the slight incline of the wall was taken into account in the design.…
remixed to have less 'sharp' edges Category: Bathroom
Scanned my Grotesque statue. The STL file is big and does not fit ordinary 3d printers The model is scaled to 40% in the 3mf-file. Automatic supports is used.
Printing Instructions: Supports Required: This model requires supports for optimal printing. I used tree supports in Cura Ultimaker. Printer Settings used: Printed on an Artillery Sidewinder X2 . Nozzle Size: 0.4 mm Layer Height: 0.12 mm…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
If you have ever been to Disneyland in California, then you most likely have seen these marble statues that were given to Walt as a gift in the 1960's. They have been on display ever since and are located in a small entrance to…
Oi! dese gits iz redikulous but dey got a propur revolushun started ta free da grotz frum ork oppreshun. A propur komuni....kommooni..koomuni... ...sharin' revolt haz ta haz a komitte: da Gretchin Revolushunary Komittee (GRC) to guide it.…
Alexander Grothendieck – Buste 🇫🇷 Description (Français) Ce buste rend hommage à Alexander Grothendieck , l’un des mathématiciens les plus influents du XXᵉ siècle, figure majeure de la géométrie algébrique moderne. Inspiré de la…
Spirála o průměru 59mm pro reaktor grotech UF-070. Zajistí správné víření vody pro neustálý pohyb peletek.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Easy to print, no support needed. I recommend printing a bit…
Grothe doorbell cover, so you can better match the doorbell with the color of the wall. Can be used in combination with 8V, 12V, and 24V versions of the Grothe LTW 1171 mechanical doorbell. De white version on the photo's is the original…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Gewoon een grote trechter om van de grote zak apennootjes een kleinere zak te vullen zonder te morsen. Simply use a large funnel to transfer the large bag of monkey nuts into a smaller bag without spilling. Simplemente use un embudo…
We have a Sagrotan No-Touch soap dispenser between the wash basins of our dual vanity. Since I was printing a lid anyway, I added a holder for the two basin plugs that had been lying around before. My wife liked it, Mission accomplished.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Easy to print, no support needed. Overhangs are 40°. I…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Oi! dese gits iz redikulous but dey got a propur revolushun started ta free da grotz frum ork oppreshun. A propur komuni....kommooni..koomuni... ...sharin' revolt haz ta haz a komitte: da Gretchin Revolushunary Komittee (GRC) to guide it.…
IoT button with the shape of the Grafana mascot Grot. Uses a esp32 c3 super mini and a cherry mx key. What to print? One of each file. The top part needs supports (for the grot visor). Make sure to position the housing with the flat face…
uchwyt na groty dostacji lutowniczej yihua 706+ z czterema magnesami z tyłu soldering tip holder with four magnets on the back
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Oi! dese gits iz redikulous but dey got a propur revolushun started ta free da grotz frum ork oppreshun. A propur komuni....kommooni..koomuni... ...sharin' revolt haz ta haz a komitte: da Gretchin Revolushunary Komittee (GRC) to guide it.…
Anbei mein Remix von Robert Nickel hinsichtlich einer Halterung für Ikea Tisken und den Sagrotan Seifenspender. Man muss diese in die vier Löcher “einklemmen” mit seinen Füßchen. Dann hält er recht gut. Druck ohne Support mit PLA.
Meet the Tipsy Brew Grot, the newest fan-made Brewmaster card—and possibly the least reliable member of the whole brewery crew. She’s usually harmless, frequently pickled, and somehow still claims the floor is “tactical cover.” With her…
I like Gillis’ Grotesque. I printed it a second time scaled as large as I could print on Prusa MK4 without splitting the model. In addition to slightly adjusting my prior color painting, I added fuzzy skin (painted on) to the model.…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is a larger Kitchen Safe base, around 104 mm space underneath the lid.
Scanned the model in the garden - Keeps evil prints away
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Best printed as oriented in the STL file. No support needed.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
