Counting matching models…
Overview Traveler, beware the crossroad - for HECATE draws near! The Hecate mod converts the Nerf Bigshock into a four-shot inline clip blaster that loads from the rear! This uses half-length short darts, and can achieve a performance of…
does not fit the DW-5600 and similar as the buttons on the module are much closer together.
My remix of https://www.thingiverse.com/thing:4713483 . Hardware you will need. Listing McMaster-Carr parts #s will need one of these for the breech - Oil-Resistant Buna-N O-Ring 1/16 Fractional Width, Dash Number 012 9452K21 and 6 of…
Replacement foot for the Beyblade Slingshock stadium, including clip. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: Yes Resolution: 0.1 Infill: 100% Filament: iPrint3D PLA Notes: Print the main part…
This mod converts your Nerf Mega Bigshock into a 4 short-dart capacity Halo Magnum pistol that you load from the rear. There is some shellcutting required but keep the original screws as you can use them to screw the two halfes together.…
Replacement Straps for the Casio GW-9400. Models for 3DP optimized straps as well as close to original straps included. I recommend printing the 3d printing optimized straps. The bumps in the original whatchstraps result in a rough…
An adaptater for bigshock to use normal nerf darts. EDIT 03/07/2019 Add long model and improvement Added a long version of the adaptater who have more stable shots. Improvements: Canon diameter is larger. Easier to disassemble. Canon as…
A quick-on, quick-off tapered friction fit adapter for shooting the smaller Elite darts in the Mega Bigshock. Probably works with other "Mega" barrels as well. MUST have AR mod or this WILL NOT WORK. Part of making this easily removable…
Another (Mega)Jolt reskin. Remixed to be a simple single-shot muzzle loader. Drop-in reskin/rebarrel for Mega BigShock. File set includes a spring spacer, barrel, and remixed shell. Works without removing the air restrictor(AR) and is…
a bunch of muzzles for https://www.thingiverse.com/thing:4713483 or my rear load remix. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Other
Wanted to do an improved version of gibbles_fx " NERF BigShock Removable Barrel (Elite Dart and Rival HIR)" I added knurling to the barrel end and also made the tolerances fit better in the blaster. Two files attached. One is default and…
This is a 4 shot inline mag for the Nerf Mega Bigshock. It allows you to put 3 short (3.5mm) darts in the mag and one in the barrel. To reload, tip the barrel down while priming and then fire away. Materials: This print One 40mm length of…
Another pass, this time with different muzzle types that you can swap. This is a 4 shot inline mag for the Nerf Mega Bigshock. It allows you to put 3 short (3.5mm) darts in the mag and one in the barrel. To reload, tip the barrel down…
modded the hecate to use whatever hardware i had on hand all the model files here
A barrel insert for the Nerf Mega Bigshock, converts the blaster to shoot 6 shots with half darts along with a 6 round dart storage. Originally made due to me not liking how permanent Mighty Shrub's Hecate conversion kit was. Hardware :…
Today, I stumbled upon a poor Bigshock with a snapped plunger. The little one could be saved, and so I did. The Posibilities for a compact shotgun pistol were something I had in mind with it. I remembered the design of thepaperskeleton…
A shorter version of https://www.thingiverse.com/thing:3178982 . Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Other
The Fold-N-Go is an amazing powered wheelchair. The current, “Magshock,” model is capable of propelling up to 350 pounds of person at your typical powered wheelchair speeds for up to 17 miles range. Certified for FAA use on skybridges to…
A barrel insert for the Nerf Mega Bigshock, converts the blaster to shoot 6 shots with half darts along with a 6 round dart storage. Originally made due to me not liking how permanent Mighty Shrub's Hecate conversion kit was. Hardware :…
Today, I stumbled upon a poor Bigshock with a snapped plunger. The little one could be saved, and so I did. The Posibilities for a compact shotgun pistol were something I had in mind with it. I remembered the design of thepaperskeleton…
Wanted to do an improved version of gibbles_fx " NERF BigShock Removable Barrel (Elite Dart and Rival HIR)" I added knurling to the barrel end and also made the tolerances fit better in the blaster. Two files attached. One is default and…
Just a quick remix to fit a 150mm height printer and reduce the need for supports (still may need them). Category: Other
Same as before but this time with an A2 style flash hider. Used this as a starting point for the flash hider https://www.thingiverse.com/thing:741776 Haven't printed one yet but it should work just as good as the original model. May need…
This wall mount was designed to be used with the Mega Bigshock Frame mod for the Nerf Mega Bigshock blaster that was designed by TimETraveller8 and the Nerf Mega Bigshock Trigger Guard Cover designed by xylite . After printing I used a…
After ripping out the primary air restriction device, I was left with an unsealed hole in the back of my Mega Bigshock. So I quickly threw together this plug. Figured I should share it. It's a tight fit when printed in ABS, easily sealed…
