Counting matching models…
A simple but beautiful wall mount for LEGO set Ferrari 488 GTE: https://www.lego.com/en-dk/product/ferrari-488-gte-af-corse-51-42125 Printed in PETG with 0.6 Nozzle 2 perimeters 20% infill gyroid. Hole though is 6mm while the counterbore…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
This is a mount for a Logitech camera utilizing the empty 3mm screw hole on the X-Axis motor. Once complete you'll need a 3mm x 35mm screw to mount the camera (C170 shown in pictures) and a 3mm x 8mm screw or 3mm x 10mm to mount to the…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Original onShape project: https://cad.onshape.com/documents/0c3b8288c7b92d178ec1f3ff/w/b7a05d6d8787b131fd44b065/e/38e3f2fc0970434ac8e5aed7?renderMode=0&uiState=68fe239e2195008bbebe03d0
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Iconic engine head gasket keychain -Toyota 2JZ-GTE Print settings: Layer height 0.2mm, 100% infill, nozzle 0.4, ironing on Dimensions: 80mm length, 3mm thickness
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Ferrari 488 GTE LMGTE Team AF Corse #51
This is another remix based on the great work by MrBigTong, and then by Bruce (thanks for sharing). The tray has been scaled-up to fit the 87 x 87mm boxes used by Magtech, and holds 17. The Integral Slatwall mount was made for the…
Print approx. €8.89–€10.86 excl. taxPreliminary estimate for one variant
Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing This digital download is built as a sim racing design. After purchase you will be able to download the…
Please click if you appreciate my work :) Experience the speed and elegance of Italian automotive design with this detailed Ferrari 488 replica, crafted specifically for 3D printing! This high-quality model combines realistic exterior…
F1-inspired steering wheel Easy installation just unscrew the old steering wheel by unscrewing the 6 central screws then screw on the printed attachment . The attachments are screwed together using m4x25 screws and nuts Inspired by…
Sized ammo box to fit a Magtech Insert The 9 MM letters for front insert has now been added. It is best if reduced to 98-99%, 100% can be a little tough if machine isnt calibrated well
A topic that comes up regularly is table space for board games. Sometimes you can help yourself by adding a small table next to your gaming group - or storing needed pieces in a sub-optimal situation. Or only a little bit more room per…
Español: Modelo STL para verificar nivelación de cama de impresión de varios tamaños. Inglés: Multiple size STL model to check print bed leveling.
MagTetra is a magnetic tetrapod puzzle toy made of four separate legs. Each connection surface contains magnets, and the polarity of the magnets determines whether the parts attract or repel each other. To assemble the tetrapod shape, you…
A simple holder to keep the fuel filter fastened to the model. Just use a small ziptie to hold in place. Mine are printed in PLA and hold up well
Drillingtemplate for Hettich 26mm concealed hinge --- Bohrschablone für Hettich 26mm Topfscharnier --- Ref. 9261839
printed without supports in PETG, but PLA will probly be fine
I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.
Volkswagen GTE keychain with a electric lightning holding the letters together ; Notes: If you like to pause and change color like I did, the height you should do it is around 2.3mm The blue is the Glitz Sapphire. Black is add:north Glitz…
This base mount allows you to use TeachingTech's ball-joint camera mount system on your Flsun v400 (and possibly SR) rail. Specifically made to be short enough to work with enclosures. Currently designed to use phnxdrgn536's hardware…
Wall mount for the Gtech MK (K9) Tools. Holds the extras for the car kit at the bottom. Print instructions Category: Organization Print Settings Printer: Qidi X One2 Rafts: No Supports: No Resolution: 1.6 Infill: 30% Filament: Any PLA Any
Ohne Worte… Viel Spass;-)
Schild "Unbefugter Zutritt verboten". Gedruckt in PLA Weiß, Rot und Schwarz von ELEGOO.
Bigger knob for original project.
Here is a simple case that you can put a 10Gtek media converter into and mount on the wall. Included is a lid if want (Should Fit Most Converters)
This is specifically for the Bissell AirRam 19841 (shown in pictures 5 and 6). As far as I know, this is the exact same vacuum as the Gtech AirRAM 2, so it should also work. But I do not have that vacuum, so I cannot guarantee it will…
My model is a 10Gtek GT-G0101. Print both the body and the retaining clip and throw it in your rack!
A lady brought a Gtech hedge cutter into Chorley Repair Cafe because it wasn't working. We traced the fault to a damaged helical gear in the head. Gtech do not sell spares so we created one and printed it. We printed in PLA (having had…
Print in PETG or ASA since there will be water contact all the time. Use the scaling function in your slicer for other sizes or use my other model.
Gtech AirRam Hanging bracket IMPORTANT I found these work well BUT leave marks on the Gtech These are to hang a GTech AirRam Mk2 from a wall. 3D Print long side left to right as shown in the Cura Pictures above. Video GTech AirRam Wall…
Hi! This is my second arcade controller case. If you love retrogaming this one will make you happy. I scaled by 3 the measurements of the classic SNES controller and the result is a huge and nice arcade controller. Side buttons (L & R)…
Angled wall mount for Lego 42125 Ferrari 488 GTE “AF Corse #51” Printed in PLA with 0.2mm layers, 4 walls (alternate extra wall) and 25% infill, 29 degree treshold for supports. The .stl file is in the correct orientation, altering it may…
About this clip If you own a Gtech Pro vaccuum cleaner then at some point you will need some of these clips because the original items break easily and do not seem to be available as spares. Design details Several iterations were made to…
17mm table thickness 70mm undertable depth
i made it for skoda octavia gtec MK3
a fast print for testing your 3d printer for supports
Ich habe ein ähnliches Schild irgendwo im Netz gesehen und es mir dann selbst gebaut. Hier gibt es den Spruch auch bereits auf Schildern in anderem Design. Ich wollte es jedoch wieder nach DIN 4066 Art haben und mit Magneten. Im Rahmen…
Calmed inflow with integrated reduction from DN200 pipe connection to a diameter of 125mm. DE: beruhigter Zulauf für Regenwasserzisterne, DN200 mit integriertem Reduktionsstück auf 125 mm. ATTENTION! Doesn't make sense to reduce a 200 mm…
Schälchen für AIRAJ Werkzeugteile-Box https://de.aliexpress.com/item/1005006338849477.html?spm=a2g0o.order_list.order_list_main.53.7f7b5c5flCTCbg&gatewayAdapt=glo2deu
Cover for the DIN radio-slot of our Opel Kadett C Coupé GTE with the embossed GT/E lettering.
Maßgefertigter Bilderrahmen für Malen-nach-Zahlen-Bilder (80 x 40 cm) Ich habe einen speziellen Bilderrahmen für Malen-nach-Zahlen-Bilder mit den Maßen 80 x 40 cm entworfen. Der Rahmen besteht aus: 4 linken Winkeln 4 rechten Winkeln 8…
I made almost original back cover for the Gteng watch but I put there a little bit more space to fit all the mods (adding minim osd micro and a voltage regulator) and nicely close it together without a problem. I'm not using original…
this might be small you can resize it in your splicer
Basic mix of an old favorite kitten model and a cute pig. Updated after noticing a hole in the neck.
Print in PETG or ASA since there will be water contact all the time. For other sizes just scale it in your slicer or use my other model.
Fits heatsink mounts of v3.0
plné funkcni náhradní dil na přední nápravou. je to kopie originálního dílu.
Now your printer can be as cool as you are! Featuring the iconic HangTen feet on an inverted cone with a flattened bottom and a 6mm hole for the potentiometer shaft. This is an LCD Knob replacement for the Printables contest. I printed…
Schälchen für AIRAJ Werkzeugteile-Box https://de.aliexpress.com/item/1005006338849477.html?spm=a2g0o.order_list.order_list_main.53.7f7b5c5flCTCbg&gatewayAdapt=glo2deu
Filter holder for Kingtech filter står vinklet så luft op står i filter
Lygter Holder til: @Trustfire TR-J18 8000 lumen. Opsætning med både skruer og strips. @Laghøjde: 0,25 @@Perimeter:: 4 @@Infill: 25% @64gr. 5 Timer 50 minutter
I haven't found a better mounting system for my needs, I just needed a slight change to suit my needs. You'll need one m5x10 socket cap screw (or similar depending on your camera)
just the base model, still cool. ultra is just massive. (the models are actually the same size you can just make them bigger when splicing them that's on me)
I made the tower slightly larger as some mildly larger dice would occasionally get stuck in the tower. Note: this is not perfect but if you are having the same issues I was it will solve your issue. Dice also tend to come out of it a bit…
Schild in Fusion 360 erstellt. Farben können nach Belieben angepasst werden.
Wall mountable storage for the the tools & accessories that come with a Gtech Multi handheld vacuum cleaner. Mounts with 4.5mm countersunk screws. Holds: Power Head Dusting Brush Extension Tube Spare Filter With enough space for: Hair…
Medium extension tube for the Gtech Multi handheld vacuum cleaner. The end is the same shape as the regular end of the cleaner, so that the Dusting Brush attachment can be used if desired.
If you want to go COP conversion on your 2.gen 3S-GTE, and want to use stock sensors, this replaces the stock distributor lid.
10GTek X520-DA1 bracket for Lenovo M720Q / M920Q (pcie riser needed), 3,5mm notch added for usb cable of 4010 blower fan if needed.
Im Langteilehalter von Bott im vario3 System sind kurze Teile die darin verstaut werden schnell nach vorne gerutscht. Unmöglich diese mit der Hand wieder heraus zu bekommen. Diese Ausziehhilfe wird mit einer Schnur am original Deckel…
Filament straigtener. Glue over the bowden insert on your Dual Drive Extruder(Bondtech or clone) the holes are for pressing the bowden insert to swap the tube.
just the smaller version of the base phone that's all it is
The all new Gtech gPhone Series 4 X is here! this is the Ultra model, but that name has been scrapped after the series 3 lineup, and changed to the X model. The entire lineup is still under development as of 4/16/25, but it should be…
4S looks a little different than the base 4, and it lacks the camera quality, and base amount of storage.
Hier stelle ich euch eine Auftragsarbeit vor, die ich für meinen Nachbarn erstellt und gedruckt habe, er möchte seine Zeltstangen damit Knickfrei auf dem Träger befestigen. Der Keil ist in Fahrtrichtung hoch 140mm Lang 60mm Breit und 5mm…
teachingtech flexible octoprint webcam mount for 3030 extrusion
Showcase your LEGO Technic 42125 Ferrari 488 GTE like a true collector with this sleek and sturdy wall holder. Designed specifically to fit the dimensions of the Ferrari 488 GTE model, this mount allows you to safely display your build…
After one of the legs of m Pygtech tripod snapped off I used 3D scanner to create a model of a replacement leg. At the bottom of the leg I created holes for magnets (see the picture), since the original leg has it and it helps legs snap…
Here is the all new Gtech gPhone Series 3 Ultra (or gPhone3 Ultra for short). one of Gtechs first phone models that is actually good. what are you waiting for…? print it!!1111 the color in the picture is titanium white. the side part…
Introducing the all new product from Gtech, the gWatch A1. It features an incredibly powerful ECG Sensor, to track your heart rate, and more. Bands are coming soon. An outstanding 3000 nit screen, allowing the brightness to automatically…
this spatula bed scraper has storage with a cap next to it.
I have this little clock on a shelf in my office but it was facing the ceiling which made it harder to read when I sat down. With this wedge like stand it's facing more towards me.
A simple drilling template for four holes for the Ivar shelf based on the "Strong IKEA SHelf Mount" from motarr
Rafts: NO Supports: NO Resolution: 0,20 Infill: 15% Filament: PLA
🇩🇪 Deutsch Diese 3D-gedruckten Sitzhülsen wurden als passender Ersatz für die originalen Führungsbuchsen Nr 11. des Sitzes eines Fendt GT 231 konstruiert. Die Hülsen wurden im Rahmen der Restauration eines Fendt GT 231 gezeichnet, nachdem…
Reworked slider to fit Ferrari 488 GTE “AF Corse #51”. Fits the wall mount from the linked remix.
Iconic engine head gasket keychain -Toyota 2JZ-GTE Print settings: Layer height 0.2mm, 100% infill, nozzle 0.4, ironing on Dimensions: 80mm length, 3mm thickness
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.
Wall mountable storage for the the tools & accessories that come with a Gtech Multi handheld vacuum cleaner. Mounts with 4.5mm countersunk screws. Holds: Power Head Dusting Brush Extension Tube Spare Filter With enough space for: Hair…
Medium extension tube for the Gtech Multi handheld vacuum cleaner. The end is the same shape as the regular end of the cleaner, so that the Dusting Brush attachment can be used if desired.
After one of the legs of m Pygtech tripod snapped off I used 3D scanner to create a model of a replacement leg. At the bottom of the leg I created holes for magnets (see the picture), since the original leg has it and it helps legs snap…
Drillingtemplate for Hettich 26mm concealed hinge --- Bohrschablone für Hettich 26mm Topfscharnier --- Ref. 9261839
T6.1 tiefergelegte Handbremsabdeckung Linkslenker.
