Counting matching models…
Remix of a remix :) The original part didn't last a week - the tab on the outer ring broke from fatigue. Here's a redesigned version with a stronger (and simpler) mount. Enjoy! Print instructions Use supports
This 3D model is a coffee cup holder that attaches to a stroller, making it a must-have for parents who enjoy a hot drink while on the go. The holder includes several parts that can be 3D printed and assembled with the help of some…
Remix of the Extruder Gyroscope Print in place with press fit magnets This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets It is made for the Purse Mini+ but should be compatible with the MK3 / MK4 If not, let me know…
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
Remix of a remix of a remix :) I draw the socket that fits the MK4 Motor and keeps the gyroscope steady.
Putting a gcode, but in case: 100% infill .15-.2 resolution Any material should be fine(PLA- 205-210celc) Lower print speeds(PLA- 40-50mm/s) Supports on plate only upside down If you enjoy my work, don't forget to like!
Update in files named NEW : Main plate a bit longer Extruder pattern in gyro now 0,75mm below top layer substract your text now 0,75 below your color switch will make bottom of text and extruder pattern of same color ( see new picture )…
Simple gyroscopic star ornament. Two options included. There's a dual color option that uses filament change or just use the single color option. Print settings: Designed with a 0.8mm tolerance, prints best at 0.2mm or better. Avoid using…
Print it with this setting: 0.2mm height without supports sepreate it into parts Print in Place
This Christmas ornament was built in Blender and has a small inset star that spins on an axle within a big star after removing supports. I would recommend printing it with 0.4 mm nozzle. Add supports under the axle and under the inset…
Printer: Prusa MK4 Material: PETG Infill: Doesn't matter, the inner sphere is hollow. I used 15% Supports: None needed
An optical illusion for the Prusa MK3S x-axis with mount for gyroscope.
This is a fidget gyroscope. It spins and doesn't have any pins so you can rotate it in any orientation Notes: The proportions change as the number of rings increases. The smaller the number of rings, the smaller (in height) I made the…
This simple gyroscope fidget prints in about 45min and spins remarkably freely. I usually carry several of these to give away as gifts, and they are some of my most popular prints
Tired of your drink tipping over while you're zooming down the sidewalk, weaving through traffic, or just trying to enjoy a cold one on your ride? Meet the Gyroscopic Can Holder. Designed for 22mm handlebars (bikes, scooters, strollers,…
I designed this hook to hang bags on our Mountain Buggy Duet stroller. This is a version with gyroscopic cupholder. To assemble it you need 4 M2.5 screws with nuts and to secure them I use Loctite glue. Hook_with_holder should be printed…
MEMS Gyroscope 100:1 scale model of a MEMS Gyroscope. https://en.wikipedia.org/wiki/Vibrating_structure_gyroscope For demonstration purposes only, but doubles as a nice fidget too :) Printing: Printed in PLA. Print without scaling for a…
This is my fourth iteration of the fiendishly clever walking toy invented by my friend John Jameson back in 1981. It mechanically gears a spinning gyroscope (made of 104 pennies!) to a cam which pushes a pair of feet up and down. When one…
Keep your drinks stable and spill-free with this innovative gyroscopic can holder! Designed to attach securely to your belt or pocket, this holder uses gyroscopic principles to maintain your 33cl can in a level position regardless of your…
These are a couple of gyroscope fidget toys I designed and after playing with/testing them I think they are ready to share! Both the disk and cog at 100% are about 80mm in diameter and 24mm tall. 0.4 or 0.6 nozzle, No supports, 3…
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
A simple but fun Gyroscope Fidget. It is Print in Place and should work after breaking the rings free. Rinse it slightly with water for smoother movement.
A simple but fun Gyroscope Fidget. It is Print in Place and should work after breaking the rings free. Rinse it slightly with water for smoother movement.
A gyroscope fidget toy. It was printed at 0.2 layer height an 10% infill. It should be able to spin right of the build plate.
Have you ever thought of combining a bearing, a gyroscope and a gear fidget toy? Probably not, but here it is, and it is a true adventure for both your fingers and your drifting mind. It is easy to print and assemble, and it needs no…
A fun little fidget toy gyroscope with each layer showing whole notes, half notes, quarter notes, and eighth notes. I had hoped to use more authentic looking music note graphics, but they involved too many overhangs that would have…
Gyroscope Fidget toy (keychain) Keychain with ring or without. Printable at the size you prefer. If anyone has any questions please contact me, THop3D
A small gyroscope fidget toy Print flat, on its side, recommended to use either no adhesion or raft , do NOT use brim! Mines was printed with 0.15 layer heights, 3 walls thick Should take around 30 minutes to print
When you take it off it might not be spinning so easily. So just keep playing with it and it’ll spin.I have also made a 5 ring gyroscope https://www.printables.com/model/605104-5-ring-gyroscope-smooth-spinning
A simple multi-piece print-in-place heart that rotates within itself. Two versions included, one with an embossed name, and a blank file too. Print instructions Highly recommended to print this with a raft as any elephants foot on the…
Summary: This is a gaming themed modular drink and snack holder. It is perfect for keeping your drink from spilling while on an uneven/level surface, such as a couch, chair, or bed. It includes a storage compartment perfect for holding…
An elegant and original spiral fidget spinner 3D printed for stress relief! This innovative toy features a spiral structure that spins smoothly around its axis. Perfect for relaxation, focus, and keeping your hands busy, it’s ideal for…
This is a simple little gyroscopic keychain I designed in Fusion 360 following the Product Design Online tutorial as a guide. I took it a step further and set it up as a multi-color MMU print.
Nice little print in place (PIP) keychain fidget toy for all VOLKSWAGEN fans. There are different versions available with different gap widths between the rings. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%
I scaled the original model and created a stand for it. All axis points are smooth and able to rotate freely.
It uses 18mm M4 screws and 7mm M4 nuts. I recommend to use nyloc nuts for the outer ring. There are different attachment options, see the original for more details. I added a custom rod which lets me insert the holder into my bicycle…
Gyroscopic cup holder designed to clamp to boats or offroad vehicles and prevent beverages from spilling. The beverage holder is designed to accommodate an average sized can. The hardware used to assemble the initial prototype were 1/4-20…
I've always loved these kinds of spinners, but they can be a nightmare to print. Ball-based bearings are the best for spinning, but printing spheres is an ongoing challenge. So I thought I'd have a go to design something that is easier to…
New to the 3D printing world and design. I was inspired by others who designed similar fidgets. So i took on the task to design one and test myself. This is what i ended up with. This print is very large and measures 105mm X 46mm and will…
A awesome stressing toy and smooth spinning rings.
For a small Christmas tree Ornament
Spin, push, and transform! This geometric spinner changes shape with a simple one-handed push, letting you explore different positions and patterns. After printing: Remove the model from the build plate, then gently stretch it outward…
I made this gyroscope looking puzzle to enter the Brain Teaser Puzzles contest. You can play with the dimensions (parametric table) but be careful with the width on small diameters because the “key” can be blocked and the puzzle unable to…
Gyroscopic Christmas ornament. You can print each circle in a different color or just like me, change colors on layers :)
Nice little print in place (PIP) keychain fidget toy for all BATMAN fans. There are different versions available with different gap widths between the rings. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%
Ornament= 0.4mm space Ornament2= 0.2mm space Ornament2 no logo= without star 0.2mm space original from https://www.thingiverse.com/thing:207632
This is a fidget that you can put on your key chain to add some personality, or keep as a standalone toy. It can be easily customized through your choice of the different provided STLs, or even further by using the provided blend file.…
Remixed the remix of another remix ;) I liked the original model a lot, but it got loose and boiled randomly. So I decided to make my own version including a rail to pass a zip tie arround it. Now it doesn't move at all and it's really…
This remix includes both the gyroscope and the optical illusion You can print and use them separately or mix and match them to use together The connectors are made for the MINI but i added an adaptor for the MK3 No magnets required Print…
I recommend using PLA for this print and use a 0,2 layerheight. This print doesn't need any supports. Happy printing
Gioco progettato per il concorso di design Fidget Toys Stampa sul posto Piedistalli con doppia funzione, per appoggiarlo sulla scrivania e per tenerlo fermo mentre si gioca Cornice esterna con piedistalli, tre cerchi e una sfera centrale.…
Fidget to reduce your boredom. Prints with NO SUPPORTS ! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 25% Raft: NO Material / Brand : PLA Filament Designation : Blue More designs Nerf Dart Clip bed test Mega S Legs…
Made for my Mini+. I found that magnets want to stick to the edges of the opening instead of the spinning part in the middle. I noticed the top of my Z axis rod had a small 2mm hole in the center of it so I modified this to press into…
This remix includes both the gyroscope and the optical illusion. You can print and use them separately or mix and match them to use together The x-axis connectors are made for the Prusa Mini+ but should be compatible with the Prusa MK3.…
This toy demonstrates gyroscopic effect. The inside wheel should be heavyweight enough
Q: What do you get if you cross a snowflake with a gimbal? A: A gyroscopic snowflake! It actually works! Can there be any better Christmas decoration? There are three variants: -small , (Gimbal snowflake star small.STL) -medium (Gimbal…
large gyroscope coaster 3mm height Update 08-12-2023: added 5mm version that is more stable and doesn't fall apart as easily
Gyro rings, print test + 1 key ring Can also help you de-stress :) Allows you to test the distances between adjacent prints (print splice test) Spacing between rings: 0.05, 0.1, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.50, 0.60 and 0.70 mm.…
Human Gyroscope Extruder Indicator (2x sizes) A fun way to see if your extruder is feeding filament through to the printing model. The largest extruder indicator model I know of. To make the gyroscope run freely as possible you need the…
Print in PETG rather than PLA. When throwing this around and banging into things, the softness from PETG is less likely to break. Or print the file without wave in TPU. Print at any layer height. Set infill to 100%. Set seem location to…
Nice little print in place (PIP) keychain fidget toy for all CAPTAIN AMERICA fans. There are different versions available with different gap widths between the rings. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%
A great way to stabilize your drink while you ride! A lot of other models I found only seemed to work for lighter drinks and riding, half empty cups, or bikes with a lot of handlebar real-estate. I needed something that could hold an XL…
Gyroscopic cup holder. The rings are modified from the original for better fit with screws, and nuts. Requires 2 12mm, 2 16mm M2.5 screws, and 4 M2.5 nuts. Use Loctite to secure screws in nuts. Print without supports. STEP files are…
I like the original design. However, the bracket broke as I was tightening it. Therefore, I decided to buy a double clamp from Amazon, and modified the outer ring to fit it better. Additionally, I carry soda cans sometimes. Initially, I…
Decorate your Christmas Tree with this beautiful ornament! It prints with standard print settings and you do need to enable supports. Please feel free to post your makes! Happy Printing!
i made a remix of Stroller hook with gyroscopic cupholder by Oleksii Zelivianskyi to hold cans and added a handle. Now you can dance and don't spill any beer! enjoy!
Remix of gianfranco's great gyroscopic keyring. I printed one and didn't like the way the inner ring spun. So, I shrunk the inner orbital by 5%, merged the handle and dropped the polys by a bit. Category: Keychains
What makes it special On my finger, this ring spins. Take it off, and it works a lot like a gyro. That second use is what makes it a 2 in 1 fidget, and it prints in place, so it works right off the print bed. It is small and fast, too.…
un modèle à imprimer avec un filament a contact alimentaire . s’imprime en print-in-place et sans support 0,2 de hauteur de couches sans contrainte majeurs. attention si vous augmenté ou diminuer le modèle les jeux de fonctionnement…
I love the original MEMS gyro, but it wasn't the right size of a wallet. Plus I found that the 0.5mm thin wall joints of vertical joints to be hard to print without gaps. So I used the 1mm joints throughout. Additionally I scaled it down…
It is perfect for some stressed moments.
Print two each of the included .STL files in the original orientation. Insert into wall at appropriate distance.
This has been conveniently split into 2 for easy printing, so you just print both halves and glue them together, if youve got no glue then you can try and use 5mm pieces of 1.75mm filament in the holes which I put in there to hold it…
This project demostrates the basic functionality of gyroscope. A gyroscope is a spinning wheel or disc in which the axis of rotation is free to assume any orientation by itself. When rotating, the orientation of the axis is unaffected by…
Description i made a remix of Stroller hook with gyroscopic cupholder by Oleksii Zelivianskyi . Thanks @OleksiiZelivianskyi for the STEP-File! This coffee cup holder fitting cups of the Klix coffee vending machines was developed to get…
Saw this a while ago in Poland, and created a replica, but accidentally lost it. Decided to now load it up here on Printables.com. Maby I will print it soon again so i can upload a picture of it while it is action…
Print in place fidget toy with free movement. Stress relief keychains, really fun to play with!
3D Printed Can Holder. Perfect for keeping your drinks safe and handy anywhere. Thanks to its gyroscopic design, your can will never fall over again!🍻✨ Ideal for the beach, the mountains, or the pool. Enjoy the summer without worries!🌴☀…
I took out the ball because some printers had a hard time printing the ball. NO SUPPORTS!!! Check out the original model here .
Remix of https://www.prusaprinters.org/prints/2561 I wanted to add a little touch of Davinci
Remix of the original donkey clamp to fit in the 17mm arm of Thule bicycles arms. Added little more space to snap easly. Secured with zip ties. I suggest to print with PETG. No need to use supports. Onshape link if you want to remix it by…
PLEASE read entire discription before printing This is a gyroscope that I designed myself. This is super fun to play with, while also demonstrating some cool physics principles. PRINTING AND ASSEMBLE: Printing is pretty straightforward.…
Nice little print in place (PIP) keychain fidget toy for all CAPTAIN FUTURE fans. There are different versions available with different gap widths between the rings. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%
Here is a remix of "MK3S Spinning Gyroscope" created by Franklin Samuels. This one is an addapatation to be used on a standard extruder motor on an ender 3. I couldn't find one so i quickly made one. It's a tight fit, maybe try to scale…
I am not sure if this is worth a remix, but since I can not upload a .stl file to a comment, I made one. I just used the Woodstock figure from https://www.thingiverse.com/thing:2463449/files - thanks to the creator, Misterdid. I copied…
Made this to transport coffees from the vending machine at work without spillage. To my surprise, it works very well and I can now run down the stairs with four cups without spilling a drop. It was more of a project to put into practice…
The fidget in the stl file consists of 7 concentric rings that can move in any direction. The idea of the design, implemented in FreeCad, originated from https://www.instructables.com/Gyroscopic-Fidget-Rings/ . The FreeCad design is fully…
This let me print this model with a 0.4 nozzle and rotate the center gyroid. If you are still having trouble, try increasing the Z offset, and/or printing with “Slicing Tolerance” set to “Exclusive.” Model edited in Blender. Sliced in…
Note: This model is designed to print completely in place with zero supports needed! Make sure your first layer is properly calibrated so the concentric rings don't fuse together. Print Settings & Recommendations Layer Height: 0.2mm or…
Modeled holders compatible with RostaP's Honeycomb Storage Wall (HSW) System and utilizes their “Insert M4.stl” File, please go to his page and download his file here . These two models were designed to have a tight fit around the tool…
This is my take on the venerable Dyna Bee gyroscopic exercise ball that came out in the late 1970's. It uses 48 pennies (US) as the flywheel mass. As a twist, I've added a geared zip starter to get the rotor spinning up to speed. From…
Classic gyroscope toy. Cannot be printed in PLA or it will be impossible to assemble due to rigidity of PLA. PETG preferred. Designed in F360 Source: http://a360.co/2oJmZRo Non printed parts: Uses CAD or USD pennies for mass. The cavities…
The design is intended to hold a cup or mug and prevent spilling. Good for those with deteriorating motor skills or kids
its a hexagonal gyroscope and it go speeeen printing note: -you can disassemble it if you squeeze the sides but be gentle please begging sounds -on smaller scales the pegs might flatten -why wont italics go away *sadness *
Giroscópio com base de suporte 100% funcional
This is fidget gyroscope. Fidget gyroscope is anti-stress toy. It is easy to print. I print this in multi color print. Take photo of your fidget gyroscope on Instagram with hashtag: #fidget gyroscope Print Settings Printer Brand: Prusa…
This Volkswagen Logo Keychain is a stylish and innovative accessory for any fan of the iconic car brand. The 3D printable keychain features a unique gyroscope-inspired design, with the logo enclosed within a spherical structure. The two…
