Counting matching models…
Easy-thread, quick-screw (I had to say it sorry) fiesta! A plethora of containers with easy-thread screw-tops. I was not satisfied with my previous creation due to a lack of deboss resulting in unsightly seamlines. Also the walls were…
A replacement arm for Koss KPH30i, I adjusted some parameters compared to the original part in order to make the printable part strong enough. Use .3mf file for recommended supoorts. Update 04/06/2023 - better tolarences, Added custom…
The headband of my Koss KPH30i broke so I created my own replacement part. Why use tape or glue when you have a 3D printer. :) This also gets rid of the rather strong clamping force of the stock headband. Other mods: Yaxi Pads MMCX…
The headband of my Koss headphones snapped, so I made this replacement. It clamps a bit less with my filament and ditches the size adjustment. The .stl fits MY head, that is very big - nearly maximum of the original size adjustment.…
holder for wall mounting
Hello, my father asked me to make a flip stand for his Parkside planer PEH30D4, i made and i tested it. Everything has been printed in PLA, except the file gomma.stl that is TPU. Pay attention that i tested it only such Parkside specific…
Adapter from standard microphone holder to microphone Sennheiser MZH3040+ME36
The clip that holds the drivers to the headband on my Koss headphones snapped, so I modeled a new one. Split to print without supports
9x Distanz - Rugel/Puffer - Ø25 H30mm - H10MM - 8x Step 2.5mm => H30mm - H10mm - Dimension: Ø25 x H30 - H10 - Bohrung 8mm - 2 Versionen => Flach oder mit Radius - Infill 25% unter den Schrauben 50% zip.Datei => original CAD-Paramater…
I needed a can holder without the supports or edges, to fix it directly to the wall or furniture. I have remixed the model from Olo Deepdelver, removing the back edges, moving the screw hole and adding a small extrusion at the back just…
A simple replacement for the business end of the Siku 1717 Linde H30 forklift. The square box slides into place and the little thread is wound around it. Then the forks are clicked into place. A drop of superglue might prevent the little…
Prints flat, requires bending. Material : PETG Supports : Yes Post processing: 1) Use hot water to bend, PETG bends at around 80C, using heat gun for me is difficult to control. 2) Use broken arm as mold to get correct shape, use clothes…
Cuscinetti lineari con flangia ovale serie LMH misure da LMH6UU - LMH8UU - LMH10UU - LMH12UU - LMH16UU - LMH20UU - LMH25UU - LMH30UU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato…
Do you have a large head like me and the stock pads for the Koss KPH30 Wireless clamp on your ears way too hard, making it extremely uncomfortable? Yeah, me too. This is an adapter for Geekria pads for the Koss KPH30 Wireless, allowing it…
You'll need two M4x6x6 patch plates (bonks), two M4 screws and two washers. Main box printed with supports. Pla/petg. Estimated printing time is about of 4 hours. The probes holder can be attached on either the left or right side. The…
I was missing some kind of box for my spot welder, so here is the result. The model was exported from Fusion 360 - Parametric Rugged Box by Darkextratoas_243028.
Print with TPU, will likely not work with a stiff/non elastic filament! Use 0.45mm outer perimeter 3mm Countersunk screws The model named Tighter has a lesser radius of 0.1mm
This is a modification I created to get that great Koss sound in a truly wireless convenient package, whilst also on a budget. These driver housings should clip onto the original already existing interface of the JLab rewind headphone…
Nice and good quality DC power supply for your shop. Good CZ review here: My supply is SPS-H305 (30V / 5A), but it should also fit for SPS-H3010 (30V / 10A) version. Screw distance is 179 mm (for a bracket) by 164 mm (between brackets) if…
This cover fits the Foredom Rotary handpiece H30. it protects it from debris and rust.
Having a magnetic tailcap on your flashlight can be very useful which is why I designed this cap to fit on my ThruNite TH30 or any other light with a 24mm diameter. The cap fits 4 10x3mm round magnets and is very strong. The fit on my…
This wall mount is for the SmartQ H302S USB 3.0 Hub. Amazon.com: SmartQ H302S USB 3.0 Hub for Laptop with 2ft Long Cable, Multi Port Expander, Fast Data Transfer USB Splitter Compatible with Windows PC, Mac, Printer, Mobile HDD :…
Recommend using this 3d printed clip to ensure it snaps into place, after installation the actual headphone is a bit looser
I created this small bracket to mount this YH800-3A mini DRO to my lathe. It twists the DRO slightly to habe a more perpendicular view on it when working on the mini lathe. At the same time it is ridged enough when pushing the buttons.
A simple replacement latch for the Hurom H200 and H300 juicers’ pulp outlet cover — designed to be functional and close in shape to the original, though not an exact replica. For best results: Print with 100% infill to ensure maximum…
Sensor mount for gap detection.
printed with ASA at .20mm layer height with .40mm nozzle. 6 perimeters and infill around 50% gyroid. Brim, model oriented with the two arms facing up. The two arms have a hook on each end that fits into the small grooves and the main ring…
I made this model to use some broken kph30i's I had. The kph30i original band likes to snap often as well as the swivel being fairly stiff causing discomfort over longer usage, it was natural for me to change that. Also, when I first…
I designed this holder to store the mini hot plate MPH30 of Miniware, which can be purchased from Digikey under FIT0888. Category: Organization
I designed this Mark Roberts Motion Control SFH30 Bumper to replace a lost one on a SFH30 rail. It goes with M3 screw in the middle to screw it in place, best to print in TPU or PEBA but I think PETG would work if you don't have anything…
I needed to mount it to the glass with double-sided tape. However, the tape couldn't support the weight, so I scratched
box suitable for drawer taken from https://www.printables.com/model/7643-various-size-stackable-resistor-storage-box/files
box suitable for drawer taken from https://www.printables.com/model/7643-various-size-stackable-resistor-storage-box/files
The Defy DCH 300 series fume hoods/extractor come with little aluminium tabs that are exactly 0.5mm thick, as a result they break off when you look at them funny. I designed little tabs that can be press-fit and printed in place for the…
Replacement strap for the KPH30i headphones, fitted and tested on my own KPH30i Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.12 Infill: 100% Filament: Ninjaflex TPU Grey Category: Music
. Print Settings Printer: Don't matter Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 90 Filament: Any ABS Any Notes: Maybe need small resize x and y for shrinkage's compensation. Крышка должна накручиваться без усилий, но не…
I needed to mount it to the glass with double-sided tape. However, the tape couldn't support the weight, so I scratched
This is an attachment for mounting the motorized brush of the Eufy HomeVac H30 Infinity onto the included stand.
