Counting matching models…
A durable tissue box cover that prints efficiently. Couldn't find any models of a tissue box cover that would fit our local (EU) size boxes. The ones I could rescale to fit, would result in a waste of printing time and material. Even…
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for PETGSource material: PET
Parameterized insert boxes for Sortimo T-BOXX G (63mm tall, 52mm square) organizing containers so that you can print sizes that Sortimo does not offer. These inserts are designed to stand on small 2.5mm feet in each corner and therefore…
Handy holder for a portable radio. Suitable for older cars where you are not afraid to screw.
This is used to install a new insert & olive if you shorten your hydraulic hose lines. It lets you grab the hose while you tap in a new insert without crushing the hose. How I Designed This Based on a pair that came with my rear hydraulic…
60% Gasket Keyboard Case (GH60) base on Cheap 60 Pro Parts : 8pcs M2 x 8mm screw insert 8pcs M2 x 12mm screw 4 x Bumpons 8mm diameter I upload the plate outline as well for you to custom your own keyboard layout.
Il s'agit de la pièce qui permet de relier la partie tubulaire à l'aspirateur. C'est une pièce qui est fragile d'origine et que j'ai simplifiée pour qu'elle puisse être imprimable. Je l'ai imprimée en PLA en 0,1 mm par couche.
printed in TPU, the softer the better, ninjaflex is a good choice, i did make the gormmets pretty “thick” its still not %100 but its pretty damn close
This is not a 1:1 reproduction as I modeled it from images with no references other than “feel”. However it is good enough and works well enough and has done for a good many months now with heavy use. Partly recorded the journey on the…
There are some other feet for Lenovo Legion notebooks on Printables, but they didn't fit my model, so I just designed my own. Only one model included - for the other side just mirror it in PrusaSlicer. I'm just sharing it here in case…
If you want to take advantage of an action that is prohibited by the license, contact us using the chat on this profile.
Here are replacement drive gears for Athearn and also for Walters Life-Like Proto 2000 HO scale locomotives. There are 2 files for the gears: The "Original" file is the same exact total length as the Athearn gears, part # ATH60024. The…
Pretty simple print. I printed at 10% infill, .3mm layers with 2 perimeters. It's not a perfect fit, but it holds it great, and it doesn't cover any of the light. Hopefully this doesn't violate any IP rules-- I measured the lightbar and…
Support for Samsung watch6 classic 47mm watch, for original charger. Two versions, one plain without letters and the other with letters. Printed in PLA, layer height 0.2mm. It needs supports.
If you want to take advantage of an action that is prohibited by the license, contact us using the chat on this profile.
Model of medallion from Fortnite (CH6S1-Night Rose)
The watch charger cradle is designed to make charging easier and more convenient for the Galaxy Watch6 models. Works well with the 43 and 47mm models and everything in between! Requires: 1x Galaxy Watch6 (all models) 1x Galaxy Watch…
Printed on an ender 3 v3 se with PLA. Layer height: 0.2mm Nozzle: 0.4mm supports: only for the Base Required PARTS* 4x standoffs (they should come preinstalled with the k2b board) 4x M3*6 countersunk screws (to hold the board in place) *…
This is a smal wastebin for the Singer 14SH654 sewing machine.
Adapter for Roborock H6 and H7 to 35mm suction attachments. Cut spring Ø12mm about 15mm long. Parts must be glued together. Adapter für Roborock H6 und H7 auf 35mm Saugaufsätze. Feder Ø12mm ungefähr 15mm lang zuschneiden. Teile müssen…
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
Model of medallion from Fortnite (Chapter6 S2)
This allows you to charge your Galaxy Watch6 44mm standing up. It is fairly small and has a channel for the cable to be discreatly routed out the bottom and back of the dock. I suggest using double-sided tape to adhere it to a surface so…
My in-law's Lay-Z-Spa A coupling broke through over-tightening (the one that connects the inflator part of the pump to the tub) so instead of paying the inflated(!) prices I'm seeing for spare parts at the moment due to the pandemic, I…
This is a modernized case for GH60 or 60% formfactor keyboard designed to be a bit bouncy when you type. The case is designed to mount the GH60 PCB via Soft TPU jackets instead of screws. Your 3D Printer needs to be able to handle minimum…
A parametrized H63 insert for Sortimo T-BOXX. Features Adjustable length, width and height via parameters Stackable if printed at less than 100% height Feet printed separately to remove the need for supports Source can be found here . You…
Der Objektivdeckel ist zweigeteilt. Der innere Teil sollte aus einem weicheren Material gedruckt werden, damit er besser in der Aufnahme hält. In dem vorliegenden Beispiel ist der äussere aus PA der innere aus PLA gedruckt worden.…
The model has been modified to fit the Lenovo IdeaPad 5 16ACH6. Printed on Ender 3-V2 Slicer settings Cura Ultimaker: Nozzle diameter: 0.4 mm Layer height: 0.2 mm Infill: 15% cubic Does not need supports
I bought the Kenwood and I needed a vertical disc holder. I designed this support that has the disks staggered to optimize space. The strange shape is to save time and material during printing, but in the end it also gives character to…
I really liked the compact design from overflow_7049. However, the newer version of the food processor has an adjustable cutting disc, which does not fit into the standard slots as the others. Furthermore, it is a bit “side” heavy due to…
Tutorial Updated 8/12/2021 Added a teensy mount as well as larger holes for the screws. Use the "updated" bot parts. Motivation Keyboard 3: Ok, I get it, there's already a ton of 60% keyboards on this site. A few weeks ago I got very…
A holder for the new remote of the M1 Matter Light strip from Govee. The bracket can be glued or attached with two screws. Eine Halterung für die neue Remote des M1 Matter Light strip von Govee. Die Halterung kann geklebt oder mit zwei…
Needs 2x countersunk Screw for Rigmount is designed for M8 2x M6x30 socket head screw & 2x M6 nut for mounting the light. the design allows for about 30degree of tilt in each direction
---- Description I created this stand because I found reaching over the keyboard to use my drawing tablet quite awkward. Having it towards me and above the keyboard allows me to easily reach the tablet. This is intended for a Huion H610X,…
I added a fillet to make it easier to grab the parts and increased the size of the top handle to create room for labels. You can download the foot.stp model file from the source model by Sorcerer. Thanks to @sorcerer_6727 for sharing the…
Model of medallion from Fortnite (CH6S3)
Model of modellion from Fortnite (CH6S3)
Apache 64 Cyclic Grip – Resin Optimized & Hardware Modified Version This is my modified version of the Apache 64 cyclic grip originally designed by @Cammando58. Huge thanks for sharing the design and the Blender file — that made this…
If you want to take advantage of an action that is prohibited by the license, contact us using the chat on this profile.
I bought a Govee H6076 floor lamp a while back and used to lie it flat on top of a desk to get some ambient light behind me when working/streaming. I decided since I was going to fill the wall with Honeycomb Storage Wall plates that I…
Better fit - Fit Perfectly
Fortnite Unstoppable medallion from chapter 6 season 2. Easily paintable for multicolor printing. The main circle is three inches in diameter and the model itself is eight millimeters thick.
I was looking for a space saving gridfinity cup for a 2 meter folding ruler but couldn't find one ;-) Base is a half pitch x 6h, no magnet or screw holes, thanks to Max @Ostat for the pattern! Size of the Ruler should be around…
I print the Luqa's model and play aroud it, I found my magnets stick together when I draw it from this case. so I design a new magnet organizer from sketch, the magnets cannot interfere with each other. I also make a hole in middle of the…
This is the wire retainer for Diatone Roma F5 FPV Quadcopter. This holds the 12Ga battery leads to the aluminum standoff. This may fit other Diatone FPV Quads. Leave a commit if anyone needs the 14Ga version.…
Remixed VicPucky's model to use magnets for easy removal of the Govee TV Immersion LED's. Magnets are from Harbor Freight and simply super glued in place. I did use 3M Extreme double sided tape to mount the blocks. Links to each below.…
Cuscinetti lineari con flangia ovale serie LMH misure da LMH6UU - LMH8UU - LMH10UU - LMH12UU - LMH16UU - LMH20UU - LMH25UU - LMH30UU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato…
This is a housing for a relay-board 2ph63083a. Category: DIY
If you buy Govee RGBIC H61451D1 (Bluetooth + Remote) LED strip then more space is needed to house all the electronics. This remix handles it and also has a slot to mount the IR remote receiver. The rest of the parts can be found here…
Clip for Rowenta cordless stick cleaner to hold the rotating brush in place. Print instructions I printed it with PETG. You may use other materials as long as you have a strong layer adhesion and a minimum of elasticity for the latch.…
This case will support the newest version of the Louder ESP32 music player from Sonocotta. The newest version of the player has connection headers for the W5500 Ethernet module as well as the OLED display. The lid has cutouts for both of…
Mount for Zebralight H600 headlamp to GoPro style fitting. Used for night skiing and biking. Uses a rubber band common with Garmin cycling accessories and other bike light mounts to secure headlamp into mount.
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This dual Zebralight holder snaps right into the HB3 headband! There's a ridge in the design that matches up with the headband grooves in the Zebralight…
One of my children installed Govee strip lights, a ribbon of RGB LEDs with “segmented color control” in their bedroom, and found that the glare from the LEDs where they were directly visible was distracting. They asked me to come up with…
I needed a slim solution to safely transport the Zoom Audio Recorder. This cover snaps into place at the front and back of the recorder, protecting the controls and display. It fits well but is not dustproof. I may change that at some…
Storage box for the H6 Essential detachable microphone array. Slightly oversized so you can put some foam in the bottom and lid (I used 4mm EVA foam) and potentially on the sides if you are going to be rough with it ;) I printed the lid…
This bracket allows the use of the Corsair H60 All-In-One watercooler for AMD RX Vega 56/64 (reference board and PowerColor Red Devil 64 tested). It requiers: 4X 20mm M2 Bolt 4X 4mm M2 Nut 4X M2 Washer You can reuse the X-bracket that…
Model of medallion from Fortnite (CH6S3) BETA version
This will ensure that you will not accidentally knock your gain while recording! this remix uses 4 M3-30 bolts to act as a barrier. In Cura, you need to use support on the bottom of the print but I opted to clear the supports from the…
Mini pc with modern CPU are still very expensive, and they also have the disadvantages of using soldered CPU or sodimm ram. I choose this board for the cheap price while still being compact, even if it's not an itx board…
I needed a plate so I made one to spare other people the pain of 3d modeling
Wall mount adapter for ZTE ZXHN H6745
You can purchase this item from me here! I also sell the Skilhunt HB3 headband here! This Zebralight H600/Emisar D2 holder snaps right into the HB3 headband! There are ridges in the design that match up with the headband grooves in the D2…
Add an independent rudder channel to your H650 RC plane with this custom motor mount. The mount is designed to hold two 5g servos that can be found here: https://amzn.to/42OCAVy (this is an Amazon affiliate link, which helps support my…
The holder is designed for mounting the Mercusys Halo H60X, H50G router without the use of screws or drilling. It utilizes the space between the electrical socket and the wall , where it is pressed in using a wedge , ensuring the…
SLICC GF H6 W1.0 – Gridfinity Compatible SLICC is an open, 3D-printed, modular storage standard for anyone who wants spill-proof, color-coded, easily labeled, and transport-safe organization for small parts. This model provides the Family…
I created this model usiing a plank template. On the second attempt i got into the holes under the audio.
The IO Panel which is delivered (at least on my board) is just a tottaly wrong one which is not fitting. Not even a little. So I made my own. Just place it flat on the build surface for printing. No support. Printed mine in ABS.
Xiaxiu Raptor / "Paptor" H650 removable mount for all-in-one analog FPV cameras. Made for the Wolfwhoop WT03 all-in-one camera, but may fit other camera models. You can buy one here:…
This is a basic, easy to print mount to modify your Jumbo Bulb with the Govee H6006. Enjoy I used ASA with 20% infill at .2 Invite me a coffee 😊 https://cash.app/$Galdooo
A simple mount for Govee H61A0 LED Neon Rope.
With this part you can repair your broken off handle of your Kenwood KAH647. Just unscrew the screw at the bottom and the two screws holding the handle. Screw it to the printed part and your good to go. I did print it with 0,16, 4 Layers,…
I use Brass insert M2 x D4.0 x L5.0 for case Recommend low speed for Switch guide
Simple stand for the grater discs for a Kenwood Food Processor Attachment (KAH65PL). This has extra space for the slicer disc, which takes up more space in this model of the attachment. I printed it on the Bambu Labs x1 Carbon in PETG at…
If you are like me, you may have found sticking the camera from the Govee H6199 TV backlight onto your TV was too distracting, and also provided a poor angle for accurate backlight color reproduction. This model is designed to allow you…
I recently bought some Sortimo T-Boxx model 320 sorting cases to store various small stuff. However the prices of the inset boxes are pretty high. So I went looking for 3D designs to print myself using cheap PETG filament. I found this…
This is a cover for the Pen device that comes with Huion H610 Pro Digitising tablet. I transport mine around in a laptop bag and the Pen comes with no cover, the nib looks very sensitive and prone to breakage so this simple cover was…
This is a model of the Curry Rice mascot from Forza horizon 6. I printed it with PLA and using a SnapMaker U1.
Printed with Prusament PETG. No Support needed. All in One and without Tools to attach.
(H610 Pro) Clip is attached by taking it out one of the rubber insets used to hide the screws. (H640P ) Clip is attached onto the cable Print Settings Printer: Ender 3 V2 Rafts: Doesn't Matter Supports: Yes Resolution: .12 Infill: 15%…
I've created a neodymium magnet holder that fits in Zebralight's Tailcap, if tilcap measures 24.20mm in diameter this will work fine! I did 2 versions, 1 to use with flex materials (the tailcap hole is narrower) 1 to use PLA etc, a little…
Stylus holder, designed to fit into RostaP's honeycomb storage wall.
Under shelf mount 70 degree angle. You will need to file down one of the screws used to attach bracket to mount so that you can pass through center mounting screw with screwdriver.
Door release button for the LG MH6042U microwave oven. Print best in PETG. Orient the part horizontally, as shown in the photo.
Since this motherboard usually comes from prebuilts and the IO shield isn't included, I decided to model one up. It can be a little finicky to get into some cases but I believe in you. Alignment depending on your case and its wonkiness…
The holder is designed for mounting the Mercusys Halo H60X, H50G router without the use of screws or drilling. It utilizes the space between the electrical socket and the wall , where it is pressed in using a wedge , ensuring the…
Made an adapter for the Panasonic GH6 to put it in my JTZ DP30-Cage. Tight fit and saving money and letting me test again some construction-abilities
This is the cover for safety. Designed for H6 and P6.
Intro Was running my voron trident printers with Dragon HF hotends and I don't be confortable with his poor performance and the heatcreep that happens sometimes. decided to replace the entire hotend with something similar but better, and…
You need a spring : diameter between 8 to 10mm approx 20mm long
DH670 Voltmeter Amperemeter Halter mit Winkel und Schraublöchern Positiv getestet mit PLA und 60% Infill. Dieser Halter dient zum befestigen eines DH-670 Volt oder Amperemeter mittelts Verschraubung als Winkel.
I made a storage box for the new discs of the KAH65.000 food processor Designed with Fusion360 Printed with ASA filament, no infill, no supports
The Sortimo T-BOXX 120 has a section that is 1.5 bin units wide, for which they ship a big divided 1.5x5 bin. I really wanted smaller bins for this section, so I could take parts out of the container one or two compartments at a time.…
I like the design of Hermann S for the Lenovo Tiny Mount. So I adapted the model for my Minisforum TH60 and the TH80. 2 Versions: -Normal: Front IO Visible (as in the Picture, No Power Button!!!) -Reverse: Rear IO Visible (with Power…
Adapter to use the Corsair H60i WaterCooler in a Socket 771/775 CPU
Wall mounts for the satellite speakers that come with the Vizio V51-H6 5.1 surround system . They angle the speakers off the wall by about 17 degrees (on the XY plane... so horizontally) so that you can plug in the cord while the speaker…
In the night thermoregulator tf-h6 have intensive light which can be disturbing. This cover make this issue disappear. Compatible also with wifi version. Print in black with 100% infill
Discover our 3D model of a Kogan QH6000 Remote Control Holder for efficient home/interior design purposes created by Khalm Down Hobbies. This simplistic yet effective model is designed to mount the remote up on the wall securely,…
The advantages are: - Stable attachment thanks to large adhesive surface. - Sensor is held in place by the clamp construction - Simple, unobtrusive design - Cheap production using PLA
適用 4英吋砂輪片，內容高度 6英吋
