Counting matching models…
Dimensions (LxWxH) 164,5 x 65,75 x 42,7 mm (100% scale) Basic information Print in place articulated Hammerhead shark. The model was inspired by the Great hammerhead shark, the largest species of all hammerhead sharks. It can grow up to…
A range of circular, oval and rounded rectangle bases sized equal to those produced by Games Workshop.
Update 2025-02-17 Added Breech - Lifter Nut v2.stl , Breech - Lifter Bolt v2.stl , and Breech - Lifter Pin [x2].stl These replace the old Breech lifter parts, should fix issues with the nubs shearing. Insert the pins into the lifter parts…
PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…
[Update] ---2023/05/10--- Version 2 with stronger joints has been added. ---2023/05/26--- New Type released!! https://www.thingiverse.com/thing:6046050 ---2023/09/25--- Fixed a defect in version 3 where the joints of the tail and tail fin…
It is now possible to print the handle without support material. The handle also consists of only 2 parts and is put together after printing. The main part of the handle has a height of 290mm together with the bottom part resulting in a…
All credits to @ Dlpoling onThingiverse | https://www.thingiverse.com/thing:5170258 Easy Print in Place Flex Hammerhead Shark.
Whoever holds this Hammer, be they worthy, shall posses the powers of Thor! This is an ambitious build. I set out to model Mjolnir in my own way with an ode to some of the things I really like about the MCU version. My main caveat was…
Dimensions (LxWxH) 150 x 74,86 x 51,67 mm (100% scale) Basic information The original Articulated Hammerhead Shark gets an update! Thanks to its more stylized and exaggerated appearance, it's even cuter and more eye catching than the…
This is a multiboard compatible hammer hook I designed to use the standard multiboard pegboard click. This should hold any standard hammer. I printed at a 45 degree angle to give all sides a consistent texture with tree supports.
Mjölnir - Thor Hammer keychain
Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.
Updated 28th August 2024, current list of bases: 25mm round 25mm slotted round 25mm hex-hole round (Skaventide box) 32mm round 32mm hex-hole round (Skaventide box) 40mm round 50mm round 60mm round 60x35mm oval 75x42mm oval 105x70mm oval…
I had a need for a soft hammer when making some parts fit tight together, and then I made this little hammer/mallet with a hammer head made of TPU, where the one end is soft (40% infill), and the other end is a bit harder (80% infill) I…
It's that time again. This cute little buddy is available for personal use for a limited time. Find this little sea critter and more of its sea friends in my Thangs , Patreon , or MMF Tribes memberships, happy printing! Follow me on…
A support-free simple yet cool looking miniature riser for DnD, warhammer, flying creatures or just for displaying minis Features Printable without supports Beautiful chain texture Sizes for different common miniature base diameters (let…
Just slice and print, one-piece print-in-place. Might need to play with it a bit in order to free the joints. Don't print smaller than 50% of the original size, joints won't work properly.
No supports needed. I included a PDF drawing to see exact dimensions. For strength I suggest using at least 3 perimeters. 5/17/25: Version 3 Rotated model for correct print orientation. Added updated drawings. 5/17/25: Version 3 Added…
A simple hammerhead shark model that also comes with different hole sizes for magnets. It comes in different versions: Circular holes cut in the bottom side with diameters of 10-18.5mm and a depth of 3mm or 5mm and a clean version with a…
Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: .20 Infill: 50 Filament: Overture PETG White
Hi! Here comes my Hammond type boxes, sizes 125B, 1590A, 1590B, and 1590BB. Perfect for DIY effect pedals. The files are available in STL and STEP formats. Personally I use wood screws diameter 3 to close the boxes. I print in PLA, with…
Hammer holder for Honeycomb Storage Wall. Fits hammers head up to 23mm wide. It comes with 4 different version - with either inserts or hexagon plugs; and in either standard position or rotated (in case you have mounted your wall in a…
Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…
These miniature bases are compatible with Warhammer 40k, Age of Sigmar, Battle Tech and many other table top games. Available WITH and WITHOUT hexagonal holes for the miniature pins. We recommend to print upside down on a textured plate…
Just general hammer. Great for some basic assembly in the office or removing prints from heatbed or SL1 platform together with spatula. Print instructions Use 70% - 90% infill
print it upside down. .2mm layers. textured PEI looks best imo
Updated 10-Oct-23: This model has had issues for a while. A bunch of people have noted in the comments that they needed to do a bunch of modifications to get the parts to fit together. I finally got back to this to make some needed…
Remix of thing:3030916 “Thors hammer 2.0! Mjolnir” and the stand is from thing:2222197. Thanks to all the designers to make these awesome files! I printed this with very dense infill. 40-50% on all pieces. The handle was a little too long…
I re-created this model for Hamm, from Toy Story. It was made from scratch following some online images as references. This V2 model has the eyes and eyebrows separated so that you can print them in a different colour! To print I…
Warhammer 40,000 11th Edition Terrain Area Footprints This collection contains printable terrain area footprints specifically designed for use with Warhammer 40,000 11th Edition. The set follows the official terrain footprint sizes used…
This is a hammer and sickle, the symbol of communism. I created it by getting this SVG: https://commons.wikimedia.org/wiki/File:Hammer_Sickle_Star_red.svg , using Inkscape to remove the star, importing it into FreeCAD, converting to a…
Roland PA-48 N Key-Hammer for White Keys These hammers always break at the same spot. The official spare parts are difficult to get and too expensive. To make your own spare part you need the weight from a hammer. This is easy to break…
BUILD GUIDE INTRO Remember your promise in a most rootin' tootin' fashion 🤠 Presenting Sidetrack, a break-action hammer-prime revolver! Heavily remixed from the Hammerhead by Leedle Dynamics, the Sidetrack achieves higher performance and…
A 3D-printable replica prop of Thor's Stormbreaker.
This is a multi-part version of Mjolnir based on the design used in the Marvel Cinematic Universe. It was designed in Fusion 360. This is the parts list: Hammer: 1x HammerBot.stl 1x HammerTop.stl 2x HammerEnd.stl 1x HammerCap.stl 4x Core…
I made this for a nephew, who lost the handle of a hammer. I modelled the entire hammer and only printed the handle. I recommend printing the hammerhead in TPU and to do a filament swap on the handle.
This is a mini cute version of Thor Hammer (Mjolnir). It fit in 4.5 x 3 x 9 cm. No support needed. If the scale fit your needs, use the gcode file, I selected lightning pattern to get a faster print. It can be upscaled easily to life size…
I've been looking for some nice looking stand for my minis and I've found one designed for ThomPerry63. It was designed for resin printing, and since I'm using mainly PLA I've tuned it to use it. Changes: filled the bottom, so you dont…
A life-sized 3D printable version of Thor's trusty hammer, Mjölnir!
This is a remix of a rubber mallet holder because I like the elegant design and it prints well. I wanted to use the same design for many holders of various sizes. In the attached photos, the white holder for the small rubber hammer has a…
I know I said I wanted to make models of less known species but one of my best friends said they would love to see a hammerhead shark, so here you go. The last joint is a bit rigid, but it's actually not that bad since the segments before…
This is intended to be used with the honeycomb storage wall https://www.printables.com/model/152592-honeycomb-storage-wall Included is a model used for attaching with an M4 insert as well as a model with an honeycomb wall insert already…
This is a replica of the Sledge hammer in real size. The original replica of the hammer (Scale 1:2 - 50cm) from Ubisoft can be found here:…
This set includes a 1:18 scale hammer and one hammer that is compatible with Playmobil or Sylvanian families. The 1:18 scaled hammer comes in two versions where "hammer2" is easier to print. Visit my blog at Enely's 3D
This is a remix from @doc 's design: https://www.thingiverse.com/thing:2815022 I trimmed the back plate little slimmer, and made screw holes to fit Biltema perboard. I printed this with 4 walls and 4 bottom and top layers.Infill 10% is…
Ikea Skadis (pegboard) mount for a hammer. Remixed from the original to use with Ikea Skadis pegboard system.
These miniature bases are compatible with Warhammer 40k, Age of Sigmar, Battle Tech and many other table top games. Available WITH and WITHOUT hexagonal holes for the miniature pins. We recommend to print upside down on a textured plate…
Remix of the modal to fit the multiboard plates properly. PS: The hooks are designed to be fit tad bit loose
I made Thor's Hammer for Lucky 13. I included the STL file, a 3mf file, and a gcode files for the MK3 and Mini. Share a picture if you print one!
Mjölnir God of War - Thor's Hammer from the God of War Game Inland Filament Used: Hammer Head: Gray PLA Pommel: Wood PLA Snap Connectors: Black PLA Printer Settings: Nozzle Temp: 215 Bed Temp: 60 Layer Height: 0.2mm Infill: 15% - Gyroid…
This is a single-part version of Mjolnir based on the design used in the Marvel Cinematic Universe. It was designed in Fusion 360. Print instructions I printed with the handle up and supports on. I would recommend not to "detect bridging…
Introducing the " Thor Stop Hammer " – a door stop that ingeniously combines functionality with a playful nod to the mighty Mjölnir, Thor's iconic hammer. This door stop isn't just a practical household accessory; it's a conversation…
Incredible range - incredibly dumb. “So cool!” - Nobody
I made this printed hammer for a leatherman skeletool. Uses 2x m2 bolts or small screws to attach. Edit: Added F3D and Step file if you want to make modficatons. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No…
thor hammer bookend made with tinkercad hope you enjoy it
3 part model of Mjolnir as depicted in the MCU Thor/Avengers films
Update! I made a new version with even more compatible extrusion types: https://www.printables.com/model/493621-aluminium-extrusion-nuts-and-t-nuts A set of easy to print and use nuts for 2020 and 3030 extrusions. There are 3 types:…
Do you have anoying commie friends? Print them hammer and sickle opener! Do you want to terrify your grandpa, who was under arrest in comunnist regime? Print them hammer and sickle opener! I recommend infill around 60% or 70%. Can be used…
Simple Hammer Hook. Which in my case I use to Hang a Zoom H1 Recorder. I only found one for the Multiboard that uses the Peg Board Pins which made it very hard to print. This model is secured to the Multiboard with a Big Thread Bold. NEW:…
Hammer needs supports to print
with hole for M4 screw
Camping! A time to rest and enjoy the outdoors, not a time to be hammering steel pegs into hard ground like a cave person. Introducing the Hammerless Tent Peg! The Hammerless Tent Peg uses a 10mm coach screw for gripping hard soil or…
Plastic hammer holder Ø 27 mm Holder for Ikea Skadis
32mm scale miniature for tabletop gaming. Support on Patreon: https://www.patreon.com/printedencounter
This is a bullpup kit for the PLR-16 gbbr by WE-Tech. I ended up with a PLR-16 in my possession a few years ago, and it didn't see much use because of how bizarre and unwieldy it is. I decided to make this kit to turn it into a much more…
D&D Knight with 2 handed Warhammer
Um geplante Werkzeughalter am Prusa Mini+ zu befestigen, brauche ich Hammermuttern, natürlich selbst gemacht. Genutzt habe ich PETG, aber PLA sollte auch gut gehen. 15.06.2024: Modell zum Selberschneiden des M5-Gewindes hinzugefügt.…
This set allows you to make two types of flexi sharks: common shark and hammerhead shark. Print in Place with no supports. Easy to assemble by simply fitting the nut and bolt parts. Please take pictures of your Flexi and share them with…
A rugged, no-nonsense Bic lighter sleeve designed to look like it’s been forged, hammered, and built to last. The bold, faceted texture gives it the feel of hand-worked metal, adding grit and character to an everyday essential. Print it…
No lab's complete without a hammer within easy reach. Having a handy wall-mount goes a long way. Print-off one of these and you shall emit a sense of organization, while being that much more ready to quickly quell any robot uprisings. The…
A bold and unique FlexiMania sea creature inspired by the iconic hammerhead shark. This articulated print-in-place model features a wide head profile, smooth body flow and satisfying flexible movement straight off the build plate. Perfect…
find on makerworld for all info https://makerworld.com/en/models/434128#profileId-340078
print in petg or pla - of course consider petg or asa in case of outdoor usage
If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you. https://www.patreon.com/oddinventor
easy to print, easy to hang up print with or without support also check the V2 https://www.printables.com/model/445979-hammer-holder-v2
⚠ Version 2 is out, click here ⚠ I created this model for Hamm, from Toy Story. It was made from scratch following some online images as references. To print I recommend removing all of the inside supports of Hamm Let me know how you…
Remixed model of Hammerhead for AAP01 to fit tracer Unit Changes: - Slightly bigger - Space for tracer unit (Acetech Brighter C or any below 28mm diameter) - 14 CCW inside for tracer - Removed bottom rail (added version with this rail) -…
Modified the holder a bit that support is only for skadis-hooks necessary.
Dummy13 Titan Camera man Hammer Dummy 13 Cameraman skibidi toilet
Thors Hammer as a fun fidget spinner. .stl & .3mf files available. The fidgets in the photos were printed at a layer height of 0.16mm. Post printing: clean off any seams from the running surfaces for a smooth spinning action. Check out my…
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Fuel Compact…
[V3 available now on MakerWorld: https://makerworld.com/en/models/1521236-phone-holder-for-hammocks-tents-rope-lines It's now even smaller and all tolerance issues are fixed] Hammock Phone Holder V2 - Now even lighter! New updated…
This is a set of square and rectangular bases, with and without slots, compatible with Warhammer Fantasy miniatures from the 1980s to early 2000s. The bases are solid, so the thickness of the top and sides of the base should be set in the…
Safeekeep your troops!
This is a simple hammer holder that I remixed from the original design from NasBoc. I just eliminated the holes and added an hexagonal attachment for the Honeycomb Wall. I printed it in PLA and it comes out very sturdy. Support are…
Upgrade your Nerf Hammershot's power to the right amount for you with these different-sized spring spacers. This model includes 4 different sizes of spring spacers: normal, half-size, ¾ size, and EXTRA STRENGTH!! (I don't know if this one…
Shapes adapted from GW's released Terrain Area Footprints PDF, which although they don't precisely match the dimensions they have specified should match any paper print and likely their own released templates. Infilled with hexagons to…
Hammer hook to be mounted on Ikea Skadis board. It comes in two parts, one flat, one angled. It uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . M2 T-Nut , M2 nuts and M2 x 12mm screws are needed for mounting. For more ikea…
Mjolnir, Thor Hammer / Mjolnir, El martillo de Thor
The hammer hooks I found weren't all that secure, so I just put one together using the push-fits as a basis for the model. There are 2 variations here: 3 connectors and offset 2-connector variants. The gap between the pegs is 36.5 mm
Printed each part at. 2 mm what is three perimeters. I added infill modifiers on the threaded ends of the hammerhead to the chamfer at 100% infill. Add a brim around the inner and outer of the handle. Everything else can be printed…
Warhammer 40,000 11th Edition – Matched Play Terrain Set Dear Wargamers, Thank you for downloading this terrain set, designed specifically for Warhammer 40,000 11th Edition – Matched Play . This project was created as our contribution to…
Measurements and shape taken from the screen-used prop. Completed cane with an amber topper is approximately 840mm/33" long--the appropriate height for someone the same height as Richard Attenborough--so scale the Z dimension of the spine…
Thor's hammer from the movie in 2 part with a base.
I made this print because I couldn't find a sand rammer that perfectly matched my needs. This one is designed to fit on a Prusa printer, and be easily castable in sand. All sides have a slight slope, even the bottom, to make casting as…
Let your phone or stuff relax :) Printing Printed in PETG / 0.3 layer height PLA should work too (mat part needs proper bed adhesion) Print parts in given orientation Don't use supports or brim Assembly Also check out the corresponding…
Leonardo DaVinci cam power hammer This time I went back a bit to history, I like mechanical models and I was interested in this one. It can serve as an illustration of an invention from the past created by one of the greatest inventors -…
I have 8x3mm magnets instead of 6x3mm magnets which the original thing was designed for so I just enlarged the magnet hole in tinkercad. I used a hole diameter of 8.2mm in the design, and my 8x3mm magnet press fits in perfectly and holds…
![Hammock Phone Holder V2 [Old version, check description for new one]](https://media.printables.com/media/prints/582669/images/4663470_91478c1f-81a2-4074-8058-87f119204b7e/lighterhanger-v21.jpg)
