Counting matching models…
Very fun model of Orko from Masters of the Universe. Printed with the base, but didn't need it. Also printed with full organic supports. Came out quite nice. Now to paint…. Much thanks and all credit to ChelseaCreatesThings on Thangs.
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Honey Dipper* - A Wave Overhangs Test Print *Not actually intended to be dipped in honey. This is a test print I made to try the Wave Overhangs fork of Orca Slicer. When sliced correctly, the model should print without supports . Print…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
Generic PETG profile, 0.2LH, 0.6N and set bridge fan speed to 100% (good cooling for arcs recommended). Also note that the script, by default, prints them quite slowly. Run PRUSA SLICER Gcode through this script (not mine):…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
Endstopper für Wohwagen T-Schienen. Es wird noch ein Gewindeschneider M4 benötigt. In die Flügelmutter und die Klemme muss noch ein M4 Gewinde eingeschnitten werden. Danach kann mit einer handelsüblichen M4 Schraube M4x12 die Klemme…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
I had a hard time getting the selector for my MMU3 printed - Finally I did custom supports with a built-in draft shield. This is what finally worked for me.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
Can your printer handle this? Based on the Makers Muse Lattice Cubes, this design is a similar thing in the sense that it is a lattice cube on a base. The super lattice cube is two lattice cubes rotated in on each other, and it makes…
Edit (2023/10/01): There is now an updated version of this model available here: https://www.printables.com/model/600333-dragon-that-hangs-on-your-monitor Back by popular demand! Finally got around to finishing the model, so here it is. I…
Thx @ @neyth_makes_106416 Du hast mich inspiriert diesen Playstation 5 Konsole seitlicher Controller Halter etwas umzugestalten You inspired me to redesign this Playstation 5 console side controller holder a bit
Clicky karambit, but with no overhangs. I highly recommend using the 3mf with negative parts for the M3 nuts to recess into. I exported it from Orca Slicers, and it unfortunately might not work in Prusa Slicer.
As before, I've included files for printing in one piece or with the wings separated, as well as a wingless version. I've also included the original .blend file for those wanting to make their own modifications. The finished product has a…
A 3D-printer torture test. Highlights cooling, overhangs, stringing, bed adhesion and more. Please note that this is not an easy print, ensure proper bed adhesion before attempting this. I wanted a model to use while finding the optimal…
Very tiny test print I designed to test the level of detail I could get from my settings. See attached pictures for all measurement details. This print tests dimensional accuracy, curves and spheres, holes, bridging,…
Filled the gap causing overhangs at the base of the top and bottom parts. Slicer shows it as one piece. No supports needed at all for this print. I used a marble filament (215C nozzle, 60C bed) but my Cura5 settings need tweaking to fix…
This car cup holder is ideal for large Nalgene 32 oz water bottles. It should fit most “standard” cup holders in vehicles. I tried several designs, and many of them were too fragile and broke easily. This one really holds up! I remixed…
The original model from oxo3dprinting is very realistic, but it doesn't print well with a lot of support material. This version has been sculpted to improve the overhangs on Ein's belly, mouth, and ears. Yes, he looks a little bit fatter,…
vorhangschienen haken & kettenelemente
Print two halves, slide a 3mm rod in and presto - you have a hinge. Mix and match lengths to get the desired size. It's helpful to print in pairs, less confusing that way. Use double sided tape to attach to surface, VHB tape works well (I…
This XYZ calibration cube is designed to expose: 1.Ringing & Ghosting. The curved side changes, so you can see if the sharp corner introduces ringing or Ghosting on each face. If results are consistent all the way up the face then you are…
Read the disclaimer below about food safety ! Use this print only for disposals and be aware of bacterial growth in the cavities of the print! That said… Presenting Kitchen Waste Buddy ! Hangs conveniently in any of your kitchen drawers…
Roller blinds curtain attachment for normal curtain rail, adaptor bracket for curtain rail, curtain track holder for zebra blinds, kornise stor perde takma aparati, rollo vorhangschienen adapter …easy to print and fits perfectly
4 Test Models for optimizing and trying out different support structures and tricks. Check out my video about different support methods and tricks:
A simple little piece to help you tune your part cooling/overhangs settings Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.25 Infill: 20 Filament: NA PLA Category: 3D Printing Tests
The source marked this model as adult content.
Many thanks to the @yaras for the flame model for Lego Duplo. I enjoyed his model, but when preparing for printing, it seemed to me that the overhangs in the original model were too extreme, so I slightly removed the bulging parts from…
Two part bunny mold that can be used for casting candles, concrete, chocolates, soaps, or various other materials.
Calibration test-objects for 3D printers X, Y & Z written on the axis. ////////////////////////////////////////////////////////////////////////////////////////////// Note that I recommend calibrating the extruder before proceeding with…
Overhangs test for Conical Printing.
Remixed to not have overhangs.
Minimal tweaks to the STLs which fix un-printable overhangs in the original upload.
10mm x 10mm x 10mm Calibration Cube including bridges from 1mm to 8.4mm and overhangs from 10deg to 70deg. Designed in OnShape. Should also help you calibrate your flow settings as the walls are mostly 0.8mm and then 0.4mm at the top.…
Modular coat rack Allows to modify distance and number of hangers. Two models to join with 6 mm dowels. Loose hook to make the units you need.
The text on the original model had a lot of overhangs. I engraved the text on this remix to make printing more reliable.
I used the original model as a reference for dimensions. There are many differences from the original model. Thanks to the Bootycall Jones. I had trouble getting a good print of the original model. The overhangs and bridges were hard for…
It is a simple cube with holes cut out and rounded corners. You can treat it as an overhang test for your printer. Also looks cool on the desk :) Please like the model if you found it helpful! The dimensions: 50 mm width 50 mm length 50…
I added a 45 degree sloped wall to increase thickness and increased thickness overall for durability. I noticed that the filament holder broke where the filament clips after a few cycles of clipping in and out. I replaced the circular…
I saw this design in an amazon store and thought it would be great to 3D print or laser cut it. I have uploaded 2 STL versions of the file, in one the hooks are flat and once the print is finished they have to be shaped with the help of a…
When Printing this mod I printed it in ABS and it would warp quite a bit around the top overhangs due to ABS' natural tendency to warp without proper contact from the build surface. After taking a look at the .step file in Fusion360 I…
Support wird benötigt
Endanschlag / Stopper für meine Vorhangschiene einfach einschieben und fertig Maße sind auf den Bildern zu sehen gedruckt mit einem Artillery Sidewinder X3 Plus Layer 0.2 Infill 20% support no
Test to check dimensions, gap 0.2 mm (on my printer it took convincing to turn it), 4 overhangs (45, 35, 25, 15 ) in one thing.
3d printer torture test that takes a short amount of time This will test small overhangs witht eh letters large overhangs text detail top layer side accuracy 20mm top hight 20mm and the test on the top to see how much detail you can get…
The STL is for three channel GE model, but the FreeCAD original model is provided, so you can adapt the parameters to adapt to your particular model. STL is for the right piece, mirror before printing if you need the left one.
Two places were giving me trouble printing cleanly in PolyMax PC. The rounded overhangs near the heater screw holes. I suppose I could have just printed with supports, but I opted instead to extend the problematic overhangs down to the…
This is a remix of melinos eleaf istick pico holder. My remix is without overhangs and a little snap to hold the vape in place. It is easy to release but strong enouth to hold it in place when you are running. I have also enlarged the…
Vor der Montage unbedingt die Abmessung mit den Eckverbindungen vornehmen! Kein Support notwendig, die offene Seite sollte beim Drucken oben liegen. Eventuell eine verstärkte Füllung nehmen.
If your printer can do the steep overhangs at the fronts of the skis, without any noticeable sag , then you have one amazing printer. I'm including a couple of OrcaSlicer .3mf files. See below for more details. I did two prints in PLA:…
I really loved this model but there are a 90 degree overhangs which cause extrusion into mid air in both the body and the head. Although these overhangs are internal to the model they make a bit of a mess that needs cleaning up post…
A quick test to see if i can upload models to Printables
Simple remix to remove the overhang. In case anyone wants to do the remix better (or see just how roughly I made it), here's the OnShape workspace
Endstopfen für S0mbr4 Innenlaufstange. Habe meine Gardinenstange vor 10 Jahren bei B4uh4us gekauft. Die Endstopfen sind inzwischen weder online noch im Laden erhältlich. Design in OpenSCAD. -- ENGLISH: -- I bought those curtain rails…
Beschreibung Endstop für Gardinia-GE Vorhangschienen mit Loch zur Befestigung von Gardinia Rollringen. Fixiert den Vorhang am Ende der Schiene und hält diesen somit an der Wand. Benötigt 2mm Platz zwischen Wand und Schiene. Installation…
Da leider immer wieder die Halter über die Jahre an den Vorhangstangen kaputt gehen hab ich für Ersatz gesorgt. ;-) Die Maße sind auf den Bildern zu erkennen.
Ersatzgleiter für Duschvorhangschienen. Unten können die Vorhangringe eingehängt werden. Grundplatte ⌀ 6,7mm Höhe Aufhängung 5,2mm Gesamtmaße 9,4x7,35x18,1mm Print settings Material: ABS Layer Height: 0.15 Infill: 100% Support: Yes
Find out how steep an overhang and how long a bridge your printer can manage before you need supports, then use it to tune cooling, speed and fan settings. Six overhang walls leaning at 20, 30, 40, 50, 60 and 70 degrees from vertical and…
I made this for the phone stand and print-tables contest's. It's a simple phone stand that prints with zero overhangs. It's made to fit an iPhone 12, has a 90 mm tall back and can hold anything that is under 11 mm thick. Hope you enjoy…
This is an alternative version of the hanger for Snowstorms excellent trash can. It fits three Tesa 2kg Powerstrips or similar instead of using screws. It's perfect for bathroom tile or painted walls. Roughen up the hanger surfaces for…
I had some magnets laying around and i tought it would be great to make something useful with them. But instead of making a simple box with a magnetic lid, i tought it would be fun to test your printer at the same time. The hexabox is…
20mm x 20mm x 20mm Calibration Cube including bridges from 1mm to 16.8mm and overhangs from 10deg to 70deg. Designed in OnShape. Should also help you calibrate your flow settings as well with a 0.4mm thick section at the top of the x…
A rolling stone plaque hangs on a wall. Needs to be painted, unless you want it in one color I guess
I present a simple and extremely fast-to-print model that serves as the ideal tool for calibrating and optimizing support settings and bridging in your slicer. This small cuboid provides comprehensive feedback in just a few minutes,…
Eine Deckenbefestigung für eine Vorhangstange 28mm Durchmesser.
Remix of the ECAS04 by @3DCoded’s cutout model creates a flat surface on top. This reduces the overhang angle, and creates a flat top surface that bridging should print without any issues.
This is a simple foot for the ender 3. It would fit on any standard 4040 aluminium extrusion. No support needed. No overhangs needed. After printing, use double sided tape to stick on the stock rubber mounts of your printer (Ender 3 v2)…
I wanted to be able to print it without supports. This one should be able to be printed flat.
Mein 3D-gedruckter Vorhangstop ist die ideale Lösung, um Ihre Vorhänge an Ort und Stelle zu halten. Präzise aus hochwertigem, umweltfreundlichem PLA-Kunststoff gefertigt, bietet dieser Vorhangstop sowohl Funktionalität als auch…
Für eine Nische habe ich einen Montagewinkel für die Vorhangstange konstruiert und montiert.
How to Always Achieve the Optimal Bridging Angle In most slicers, you can only set a single bridging angle, which then applies to all overhangs. This isn’t ideal for circular overhangs or those with complex paths. Ideally, the bridging…
A filament Swatch that has overhangs, bridging and diffusion tests, as well as sharp edges to test adhesion, round edges to test flow andtext to check detail. (As much as possible in such a small size) This has a small form factor, so…
Ersatzteil Vorhangstopper für Gardinenleiste
A small snowman for 3d printer testing (spherical and round surfaces, arc overhangs/supports and 18 mm calibration cube). my printer is out of service right now (ender 3) but I'm getting a sovol SV08 soon :). make sure to print with…
Project for overhangs problem
This is a piece of the remix of the Spirit Island Insert for ALL expansions that allows to accomodate additional spirit panels. In this version, the overhangs and the art on the sides were restored.
An all-in-one 3D printer torture test for overhangs, bridges, holes, stringing and thin walls. Free, multicolour 3MF. PRINTING: 0.2 mm layers, 3 perimeters, 15 percent infill, PLA. SUPPORTS: this model needs supports. Use organic supports…
Halterung für einfach Vorhangschiene auf 20mm
Halterung für 15mm Vorhangstange (Holz, Kupferrohr o.ä.) mit 10mm Wandabstand zum anschrauben mit 3mm Schraube
Tired of tripping over a cord that runs along the edge of the bed? I made this to keep the cord for an electric blanket from sneaking out. It takes advantage of the wedge shape of the bed frame's wheel mount. The OpenSCAD file has a place…
TV Hanger that seems won't work. Not sure if scale is correct. I would not trust my TV to this. Based on https://business.walmart.com/ip/HangSmart-NO-STUD-TV-Mount-Holds-u
A unique 3D printable creation — this Suet Cake Cage Holder, Hangs From Branch, Woodpecker Feeder, Wire Frame Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
Basket, 3 walls, PETG/ASA, 5 layers top and bottom 0.2mm layer height, 15% infill is plenty, no supports required. Variable layer height will speed up print. Handle, 4 walls, PETG/ASA, 5 layers top and bottom 0.2mm layer height, 15%…
All images are renders. This design is digitally validated; it has not been physically printed or tested. A necklace tree organised by chain length . Four labelled tiers - 16, 18, 20 and 24 inch (40 / 45 / 50 / 60 cm) - spiral up a…
I ordered a flexible curtain track online. When mounted on the wall instead of the ceiling, the screws look quite ugly. So I made this cover, that snaps on it. If anyone has the same track, I’m happy to share my cover profile. If you need…
A portrait stand for 13.3-16 in USB-C portable monitors that have no portrait kickstand (folio or smart-cover models, which usually prop up in landscape only). The monitor stands upright beside your laptop, leaned back 13°, and rests only…
Apothecary Brush Drying Rack A rack that hangs makeup brushes bristles-down over a drip tray. 2 parts · 176 × 78 × 219 mm · 301 g · no supports, no hardware, no glue. Assembly is dropping one beam over two posts. The problem it is…
A one-piece collar that holds a plant's plastic nursery pot inside a decorative pot (cachepot). A ring holds the nursery pot by its rim, or by its tapered body just below the rim. Four petal-shaped arms rise at 55° and rest on the inner…
Two flat parts, about half an hour, one 3D Christmas tree. Slide them together and hang it from the star loop, or stand it on a shelf. What you get Two tree parts: one with the star and loop, one that slides down over it A tiny fit coupon…
10mm x 10mm x 10mm Calibration Cube including bridges from 1mm to 8.4mm and overhangs from 10deg to 70deg. Designed in OnShape. Should also help you calibrate your flow settings as the walls are mostly 0.8mm and then 0.4mm at the top.…
20mm x 20mm x 20mm Calibration Cube including bridges from 1mm to 16.8mm and overhangs from 10deg to 70deg. Designed in OnShape. Should also help you calibrate your flow settings as well with a 0.4mm thick section at the top of the x…
Halterung für 15mm Vorhangstange (Holz, Kupferrohr o.ä.) mit 10mm Wandabstand zum anschrauben mit 3mm Schraube
How to Always Achieve the Optimal Bridging Angle In most slicers, you can only set a single bridging angle, which then applies to all overhangs. This isn’t ideal for circular overhangs or those with complex paths. Ideally, the bridging…
Remix of the ECAS04 by @3DCoded’s cutout model creates a flat surface on top. This reduces the overhang angle, and creates a flat top surface that bridging should print without any issues.
This 50 ml measuring cup hangs on the container opening. The opening dimension is 40 mm. I used organic supports for the print. I suggest PETG so the handle has some flex without cracking.
Tip: cut horizontal bar 1 to fit your curtain rail. Horizontal bar 2 is so it does not fall. In the photos i cut it to fit my curtain rail. (Example of what you can hang: Chrismas lights)
I'm always in a hurry to get my finished print off the printer to see the result. The “Take Photo” sign has stopped me from removing the print before I take a picture. I like to have pictures of the raw print. Plus, I think a print bed…
I have a Radio Shack soldering station and I just bought a set of tips for it, and wanted a nice way to organize and display them. So, I made these holders that hang over the side, or between the two around the back of the station (inside…
![Calibration Objects [Collection] e-step, extrusion-width/-overlap, overhangs ...](https://media.printables.com/media/prints/216901/images/2029326_55f85fff-3e84-4ac1-ac05-391d25233a38/2022-06-07-18_12_19-xyz-calibration-cube-20mm-_-p.jpg)
