Counting matching models…
UPDATES: 12/2021 "A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:2718242 Edit: Added split versions, use the one-piece model if you…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:3486066 Hmu if anyone needs a split version, or if someone splits it…
A note about my 3D printable figurines Over the years I experimented with creating 3D printable figurines, including a workflow that involved posing and adapting stripped game assets. It was an interesting phase of my portfolio, but the…
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
Model of a ghast from Minecraft that can hang or stand. The whole thing prints without supports. I suggest using lightning infill to make it light (works great for me) There are two versions of the head and tentacles. Ghast_Head_Hangable…
If you like my stuff please consider buying me a coffee https://ko-fi.com/philm 3D printable replacement chassis plate for the popular 4WD Arduino robot/smart car Includes a split version for printing on standard 200 X 200mm beds To join,…
18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…
My son loves Paw Patrol so I have these figurines. They can be scaled up as I have tested that but I have not tested it
Brauchst du eine schnelle Übrraschung zu Ostern? - Dann bist du hier richtig. Ich habe insgesamt zwei Varianten als Druckprofil erstellt: mit Knickohr mit geraden Ohren Montage: Evtl. musst du die Aluminiumfolie ringsherum etwas glatt…
Best Print this with custom supports Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0.2 Infill: 5% Filament: Prusament PLA Grey Category: Art
3D Printed race track RC car 1/10 scale 3D printed body available HERE Step files of all the 3d printed parts are now available Stay tuned for exciting new projects on our Facebook group The 3 main guide listed above contain all the…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
For the most up-to-date parts, visit the GitHub project page . Video: https://www.youtube.com/watch?v=_t0HLC2bZMU This is a 1/28 scale RC chassis designed to be compatible with Kyosho MINI-Z body shells. Current version fits 90mm (M)…
Here are the modified files I used to print out the awesome Star Trek Discovery phaser that was beautifully designed by ajethridge . This has been sized to a nice fit--not too big but not too small. It is 22 cm from back to front. The…
***NEW v3 updated model with better shape available here: https://www.printables.com/model/1490289-star-trek-tng-cobrahead-phaser-v3 Here is my improved version of the cobrahead phaser published on thingiverse. I wasn't happy with my…
A ghastling - or Happy Ghast baby - is a new mob introduced in the latest Minecraft update called “Chase the Skies”. This update has been much anticipated, since the Happy Ghast introduced a new way of transportation where players can fly…
Inosuke Hashibira from Demon Slayer.
https://hazbinhotel.fandom.com/wiki/Alastor Alastor is the infamous entity known as "The Radio Demon" and is one of the many powerful Overlords of Hell. He has offered to assist Charlie in her endeavours, albeit, for his own amusement. He…
Dies ist das Komplettset, im Druckprofil findest du eine Variante mit schmalen und breiten Konturen. Such dir einfach aus, was die besser gefällt. Nicht vergessen: einzigartiges Design keine KI keine nachbearbeiteten Fotos, nur…
Here is a remixed version of the awesome 'Boomerang' phaser designed by Thingiverse user Hydrate_or_Diedrate. They did an excellent job on the model, and I went a little further and tweaked it more. The body is the only part that requires…
A chassis designed for a custom LFR.
Happy to introduce my version of the SNW phaser. There are versions that let you choose between a static non-moving prop and one that has moving trigger, removable power cell magazine, and pop-up display. The magazine and display are…
G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. The chassis has ~150 printed parts. Join our : Discord The body for this Chassis can be…
Easter decoration in Voronoi style: Easter bunnies in different sizes I would be happy to get a like if you like it Osterdekoration in Voronoi Stil: Osterhase in verschiedenen Gößen Es würde mich freuen ein Like zu bekommen wenn es euch…
Osteranhänger für den Osterstrauß weitere Modelle: Osterei mit Schneeglöckchen Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen…
The design was inspired by a picture I once saw on the internet but I could not find it again. So I recreated it from scratch. When doing so, I had my CNC in mind and wanted to create it from wood (see last picture). But after some minor…
I am always amazed by the incredible free software you can use nowadays. This cookie cutter was designed for my daughter with Inkscape and OpenSCAD following this tutorial:…
3D Printed OFFROAD RC chassis 1/10 scale RC BODY available HERE Stay tuned for exciting new projects on our Facebook group For any technical support please contact the following email : [email protected] The 3 main guide listed…
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Osterei…
The source marked this model as adult content.
Ich habe nur das Podest entfernt. ------ ENGLISH ------ I have only removed the pedestal. Print Settings: Printer : Bambu Lab X1C Print time : 0 h 59 min. Filament : PLA Filament Brend : Geeetech White Resolution: 0.16 mm Infill: 10% Brim…
Une maquette de bureau de l'avion de chasse Dassault Rafale Le modèle est conçu pour rester proche d'un angle de surplomb de 45% afin de minimiser le besoin de support. Cependant, vous devez vous assurer que vous ou votre trancheur…
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Osterei…
1:10 RC chassis with adjustable wheelbase, and flexible suspension. How to build it See pictures and fusion 360 assembly drawing. There is color code bolts. Green - 8 mm bolts Yellow - 12 mm bolts Black - M3 nut Filament Prusament PLA -…
Another cool model found over at FacePunch.com. Cheers Jace
No MMU needed. Designed at 100% to match the existing Giant Lego Wreath, printed at 170% with 0,2mm layer height. Easter Bunny No support needed. There are 2 different Bunnies available. Version 2 has an optional tail. You can also use…
Print your own clone army! By request of another Printables user, here's a Clone Trooper (Phase 1) skin for Soozafone's fantastic Mini 13 armature. The helmet is partially based on and remodeled from a model by Marr Velz on Sketchfab.…
Assault Phaser from Star Trek VI: The Undiscovered Country Highly detailed model of an Assault Phaser from Star Trek VI: The Undiscovered Country. 11 joints are needed to attach the pieces and 4 rivets for the slide. I reprinted the…
This is still an untested WIP, but I am uploading in case people like the idea enough to modify to fit other printers. I intend for the handles to be useable. A ½" square profile steel pipe is to be tapped and inserted into the top…
Here is my version of the famous type-I 'cricket' phaser used on Star Trek: The Next Generation. No supports needed for any parts but if you have issues with the cutouts on the body then use them. **For best results using Prusaslicer,…
This is for the NON NIVOMAT suspension! For further details, please refer to my work in progress, collaborative, P2 XC70 Lift Guide Here! (A PDF Version is also available under the files tab in case the link is broken) This should lift…
This mount fastens to the top M3 screw hole for the wiring harness anchor on the right rear of the ECC. There is a hole for refastening the anchor point for the harness in the model. However, it is not required since the design of this…
UPDATE: 7/3/2025 I have added fusion360 and step files for the backend, if someone want to run wild with it and make modifications. If you do make changes, please upload as a remix. These files are not intended for commercial use. It…
This is an open RC car chassis project. Step files are attached. Remix, update, redesign as you like. You need to print the gears with 0,2 mm nozzle and %100 infill. Rest can be printed with 0,4mm nozzle and %80 infill. I printed all…
This is bolt action pen inspired by Chassepot 1866 needle rifle. designed for 107mm refill no glue required supports included 0.2mm layer / 0.4mm nozzle / 20% infill EDIT 3.3.2022 :New improved bolt. If you like this, buy me a beer ;)…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
This is a remix of Christian's Phase 1 Clone Trooper. I have broken this down into 8 pieces so that it can fit on smaller build volumes such as the ender 3 (200x200) Edit: There was an issue with the back right piece during upload, have…
Hasselback potato cutter (Slicer) - Version 2 Included is Step File. I'm using with New Prusa Slicer that Does NOT need STL files to print This is version 2 because version one wasn't working that good. I made a little more stronger with…
-Check out my new design here - This is a work in progress scx24 chassis. It has a slight angled skid and fully customizable skid plate angle to allow better break over angle. There is a version for all wheelbases ( I have not tested the…
This 3D-printable model draws heavy inspiration from other 1:12 and 1:16 scale models. Every component was designed from the ground up specifically for 3D printing. Not much into RC's? Check out this flexible rolling chassis instead!…
🧘♂ Missing one Buddha to complete the famous trio? No worries — I’ve got you covered 😉 Since I didn’t have the “hear no evil” Buddha, I decided to make it myself: ✨ First, I asked ChatGPT to generate a 3D-style image that matched the look…
Chasis de un carro de Arduino más sus adaptadores
If you use the sliced helmet you will need to mirror it to get the other half.
This is a chassis for 1/43 scale bodies like Carrera Go, SCX Compact or other bodies. With this chassis you can convert almost every 1/43 scale car to a RC car. The only things you need are two servo (steering and motor), some screws,…
The meat of the Roman Imperial Army. The hastati are present in every legion, every starship and every battlefield. They are the sons and daughters of farmers, bakers and lawyers who yearned for adventure amongst the stars and to fight…
This is V2 of my Tremor chassis for the SCX24 that I designed. It is a low CG-style chassis / Comp chassis. *If you are interested in selling 3D prints of this model please contact me* There are 2 versions to this chassis. A flat skid…
Yo la commu' Voici le modèle de clips de garniture reproduit sur mesure de l'original, mais rayonné aux endroits sensibles. Pour Peugeot partner et clones 😎👌 Pour l'impression : Couches adaptatives préférable. Impression fine conseillée.…
This model is compatible with the lego system.
This car chassis allows you to replace a broken acrylic chassis or have fun upgrading your current kit to a fun buggy-style model. This model has been designed to print with minimal support (only the front face which holds the ultrasonic…
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! This model was designed by Dany Sánchez . After living in Casablanca for 2 years, Dany said farewell with this grand model of the Mosque Hassan II, landmark of Casablanca and one of the largest…
Welcome to the Universal Chassis! This chassis was created to fit the needs of LCVT, a club dedicated to making custom lightsabers from scratch. All the more recently built sabers found on their website use this exact chassis. The main…
Saraswati is the hindu goddess of knowledge, wisdom, learning, music and fine arts. She is seen carrying a “Veena” which is a musical instrument. This is a symbolic meaning which means to tune oneself into their own world of self…
This is a model of the Advent House from Chevy Chase’s movie Christmas Vacation. It was only used in a couple of scenes, where opening the windows was used to mark the passage of time in the movie. The body of the main house can be 3D…
Card box for the phase10 card game, to be printed with 2 colors. Can be assembled with 6 M3x30mm screws or with the printable Pins from xander (added in 3mf file) as shown in pictures.
Multipurpose Robotic car chassis, compatible with 9v Geared BO motors. Designed for 12v 1.3ah lead-acid battery pack. You can easily mount the battery without any screws or glue. If you found this useful, please donate what you think it…
This phaser rifle type 3 was used in Star Trek The Next Generation and also in Voyager and Deep Space Nine (ds9). Some details have been added in the series from time to time. This version is the first one. I was not able to print it till…
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
Made with Hatchbox granite 1 PLA
Car chassis for common yellow geared motors You will need 8 M3 bolts for mounting the motors to the body Category: Robotics
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
I designed this Phaser-Rifle that is inspired by the famous Star Trek Next Generation movies (Phaser Type 3). It was created in ONSHAPE in single parts that can easily be printed on an PRUSA i3 MK3s. All you need additionaly to the…
A Phase Spider based on the 2024 Monster Manual for DnD and other TTRPGs! Since it is a large creature it's base is 50mm as it is made for use on a 25mm/1 inch grid. It is FDM friendly. I printed it with an Ender V3 KE. The mushrooms in…
Slot Car Chassis that fits a DC Motor 3-6VDC 25MM
The meat of the Roman Imperial Army. The hastati are present in every legion, every starship and every battlefield. They are the sons and daughters of farmers, bakers and lawyers who yearned for adventure amongst the stars and to fight…
eng: Wedge under the door that firefighters and rescuers can use. The wedge is modeled directly for use by firemen in traffic accident fires and other activities. The product is used at your own risk (everyone with an ID card knows what…
Here's my version of the classic TOS phaser. It has a removable P1 hand phaser and custom magazine that holds with either 5x5 or 6x2 mm magnets. The trigger is a little crunchy but works. Updates: The magazines now have an added option of…
Scale is 1:10 This chassis was designed to fit for any body in size length and width. The motor is located in the middle. Only the rear shafts are driven. There is a differential with a bewel gear with a 2,5 ratio. You could use bought…
I've included the gerber file for ordering your own LED PCB. This is modeled to hold a 1000mah battery and a D1 mini ESP32. I haven't really documented making everything fit but use small cables. There isn't enough room for a speaker, so…
Hi all lovers Easters time I maked cute Bunny /Rabbit with Flower, Butterfly with Stand. New model coming soon :-) Happy printing Do you want this model sell? Write me :-)
Introducing the CapClip – your ultimate companion for outdoor adventures! Designed for hikers, campers, and all explorers alike, the CapClip revolutionizes how you carry your favorite hats on the go. Help me create more FREE models! If…
Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…
Universal platform for robotics or RC vehicle just for fun! ---------------------------------------------------------- This project was created as "proof of concept" of rocker-bogie chassis. It was used for testing software and mechanical…
Hightower: A 3D-Printable Vertical Mini-ITX PC Chassis This is a Mini-ITX case in the style of the Xbox Series One, the Phanteks Evolv Shift, or the NZXT H1: it has a small footprint, but plenty of space inside. This is designed to be…
Very simple 3D printing. Good luck with printing and lots of fun with Line Follower. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Filament: any any any Category: Model Robots
Structure et crosse pour un pistolet Artemis CP2 / Diana chaser
![eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]](https://media.printables.com/media/prints/429812/images/3562411_ec2f4b23-3b18-464a-bc88-986318650ad4/screenshot-2023-03-21-182821.jpg)
