1,631 models
Prusa Steel Sheet Holder for 2, 3 or 4 steel sheets. Print instructions Print in PETG or PLA with 0.3 layer hight and 5% cubic infill. Added a new, wider steel sheet holder for 2 sheets.
"Slightly" overengineered flexible steel sheet holder for MK and MINI printers to be screwed to a shelf. It's also extendable to as many as you want. Variants for other steel sheets: Prusa XL Bambu Lab A1 Support my work For non-Prusa…
Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…
Since i got powder coated sheets, i had to put multiple sheets somewhere So i made this sheet holder! Nothing special just a simple shape but at the bottom, there are hexagonal holes to let the air go through tho I removed my logo areas…
Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…
The remake of Puse RC1 and RC2 face shield. RC3 is mix of RC1 and RC2, it has extra space for glasses/goggles and better side protection. If you are printing it for someone else, please wash hands very well and carry mask/shield when…
JERRARI3D.com Modular solutions for storing steel sheets for the PRUSA i3 (MK2.5 and MK3) and Bambu Labs (X1 and P1P) Unlike my original steel sheet holder the GEN2 Steel Sheet Holder V2 does not require a backer mounted on the underside…
I used Prusament PLA Prusa Galaxy Black for printing. It would be nice to use a different color for each part of the ashtray. width: 100mm height: 120mm
Prusa Mini Steel Sheet Holder for 3 steel sheets based on iFreyz's Model you can also add Extended Stability Feet to join 2 holders
This is an addition to the 'Prusa Steel Sheet Holder 2er, 3er and 4er' to improve stability. Problem: the surface area of the 2 slot version of the sheet holder is small and the sheets are tall, this causes the holder to fall on the side…
A two-piece corner clamp designed to help keep your fitted sheet from slipping off the mattress. The base sits against the mattress corner, underneath the fitted sheet. Pull the sheet over the base, then fit the outer clip to hold the…
Keep your Prusa i3 steel sheets organized and dust-free with this sturdy, under-table storage solution. Designed for all recent Prusa i3 models with a standard bed size, this holder will not fit the Prusa Mini due to its smaller bed…
Printable Sheet Holder for your Origginal Prusa Enclosure for 2 or 3 Sheets with one Tool Holder (allen key). Update 01.12.2022: Added a slot to insert a square nut. Square nuts come from spare parts. STL files with the _nut extension.…
hit the like button if you downloaded it, so i can get the prusa meter , thanks Update 2024.10.12 (V2) Wall thickness 2 mm, strong enough for a case and faster to print Dummy Case depth 25 mm Toolbox depth option, Short 25mm, Medium 30mm,…
Updates: V1.1 - 1/14/2024 - Google depreciated their QR code generator. I have converted to using quickchart.io for QR code generation. Some changes in the setup instructions, some changes on the backend though. Changes noted here: ●…
What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…
This is a wall mount holder for the Prusa MK3 and MK3s steel sheets. It´s easy to take the sheets out, because it is arranged in stages. I designed two versions: SheetHolder3x and SheetHolder5x
The included files let your turn the bed model in PrusaSlicer / SuperSlcer into a textured PEI style build plate with grid markings. The specific shape of this bed is modeled after the included Ender 31 Pro PEI sheet. Note: I've included…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
A holder for three Flashforge Adventurer 5M build plates.
Experiment with 3D printed mesh sheet. Requirement: Print at 0.2mm layer height Optional: Do filament swap/color change on second layer in your slicer to get funky colors.
Back Left Mount v2: includes 2 different options for mounting. (updated 11/29/2023) One with larger holes for M3 heated inserts. One with smaller holes for a through bolt to add a locknut. Can be used with or without a strain relief. Back…
This is to be applied to a 3rd party sheets. The printer will scan this code just like it does on the official sheets. I could not find anything that worked for me. So I designed my own from scratch. - Download and print the pdf file to…
I remixed the original designs of blacktip and elumspe and made Brother P-Touch Label - and now also DYMO Label - Templates for 9mm Labels. Included are the qr-code, the materials, the written plate variant and the hatching lines like in…
A simple but effective steel sheet holder for up to 4 sheets. I added a step file in case you want to modify it. Print instructions Place the model on the flat bottom side. Rotate it by 45°. This way it should fit within your build surface.
This is an easy-to-use 3-plane skew calibration tower. The 60mm diagonals are labeled for easy meaurement, and a spreadsheet is provided to calculate the I (XY), J (XZ), and K (YZ) parameters for Marlin and Klipper. Turn off skew…
This is an easy-loading reel for developing up to 6 sheets of 4x5 film with a standard Paterson system. Sheets are slid in via the entry slots and are kept in place with keeper tabs on the top and bottom. This design was inspired by the…
Here's a good looking and reduced filament option for a steel sheet / bed holder for the Bambu Lab printers (X1C, X1, P1P). It has room for up to 4 sheets or 3 sheets and a slot for bed stickers. It also has a spot for the BL scraper and…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Prusa CORE One Print Sheet holder Simple magnetic print sheet holder for your Prusa CORE One. This model uses 6x3mm magnets commonly found in Voron projects. This model fits 3 Prusa print sheets. Check out the remixes for different magnet…
Lockable ashtray for heated cigarettes.
PLA is ok, I would recommend ABS because it has some flex. 0,2 mm Resolution 40 % Infill Tree-Support
A remix of MTibke's steel sheet holder, without the extra Prusa Mini slots. This remix can hold up to two PEI or textured sheets! The gcode for PLA is included. Print instructions My setup for a successful print: Printer Brand : Prusa…
Fitted sheets folds over the corners of a mattress, held in place by elastic. But sometimes they slip up, releasing from under the mattress. Additional elastic is required to keep the corners put. I tried…
Print the insert with PETG, glue magnets to it and follow instructions in the article about printing on T-shirts. Article: https://blog.prusaprinters.org/ how-to-print-on-t-shirts_55588 / Video:
Baking sheet stacker with long ledge and heavy duty base clip
Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)
The idea behind this set is to hold the sheets in the corners under the mattress to prevent them from slipping off. It should be especially useful for people who move around a lot in their sleep. The clips can be used in conjunction with…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 🐆💛✨ I’m so excited to share this adorable Flexi Baby Cheetah with you…
Introductions I couldn't let the prime estate under the printer go to waste, so here is a print sheet holder that mounts at the bottom and holds four print sheets. The model utilizes M3 holes in the bottom plate and uses four screws for…
JERRARI3D.com Modular solution for storing steel sheets under your enclosure or table top. This version is FULLY ADJUSTABLE in width and depth Supported Printer Sheet Sizes Ex. Prusa Mini, Creality Ender 3 Minimum sheet size: 175mm wide x…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the rack, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray opening, so…
Welcome my first ghost into the world. The included gcode is a hollow ghost with 1.2 mill wall thickness. It may not be the best eay to print the model so feel free to play with the slicer, or reach out to me for any tips / issues :) I…
People have suggested to me to make a fully enclosed flat mount version for mounting on aluminium extrusions … so here it is! This is great for mounting on rooftop, RV ETC. Disclaimer: The Starlink Mini is rated for operation up to 50°C.…
Hi all! I was able to manage getting my MK3S to print decently sized lenticular film. The basic premise is to get as flat a vase mode as you can with clear PLA. You may have to play with it to get it to play nice, as flat vase mode tends…
Made for 310mm sheets. My original sheet is 311mm wide, 1mm thick, so I made the slots 313mm and 2mm, so it fits nice but is also simple to take out! If anything, let me know. Now in two versions - full and one with hexagon “prusa style”…
This model provides ArUco calibration tags for BambuLab printers matching both the Bambu High Temprature PEI plate for use with any smooth PEI sheet and the Bambu Dual-Sided Textured PEI plate for use with any textured PEI sheet. Since…
This is a remix of Brad's https://www.printables.com/@FixThisBuildThat remix of a plate holder for Bambu printers. This print will hold the K1 Max lid, a glass bed (or magnetic base), and 2 metal sheets. Instead of adding custom tools, I…
--Update 05-12-2024-- Added .stl versions with MK4S and CoreOne text Updated the description I remixed the wall mounted steel sheet holder by Tronnic, to fit with the Ikea Skadis pegoard. It is compatible with sheets for all MK4, MK3…
Made this for my car to store my used heets. It fints in the cup holder.
0.2mm thick square sheet for test and adjust z-offset value. 60x60 and 80x80 is the optimal size to adjust the z-offset. The other size may be useful in some case, use it on your own choice. you can adjust the z-offset value while…
Made for 235mm sheets. With added tolerances slots are 239x2mm each.
It troubled me a lot when the bed sheet was in position. Now you could place the holder under the mattress. Then cover the holder and mattress with bed sheet. Remember to place the bed sheet under the holder and mattress. Finally, insert…
If you read this, please leave a ❤! Even if you don't have the enclosure, consider printing my other version instead :) It makes the plates much easier to access Slide your extra steel sheets into the rack. Sits nice and cozy under the…
Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet. Print the design with higher temperature materials like PETG… ABS, ASA Recommended to print the design laying on the side. Cut 14x17 mm rectangle from 2mm silicon sheet. Insert the…
This stand will hold 3 build plates for the K1 and K1 Max. It is sized so that it will fit in the build area of the K1 but is still large enough to easily hold the Max sized build plates. You can print this out of whatever material you…
This is a remix of the already nice steel sheet and nozzle stand from TmnSN. Original design: https://www.printables.com/model/385658-steel-sheet-and-nozzle-stand-for-bambu-lab-x1-and- I rearranged the nozzle holders so now it has a place…
This is a “mildly” overengineered remix of Whity's excellent “slightly” overengineered Expandable Steel Sheet Holder for the MK3/S print sheets. The goal of the remix is to completely remove all connector pins from the eject button…
This upgraded version of the case keeps your bullets safe and covered. Fits better in your pocket thanks to its more oval shape. The clip that holds the lid in place is stronger. Tolerances in the model are increased.
The Flexi Cheetah is a charming and interactive model perfect for those new to 3D printing. Its design enables the cheetah to mimic a stretching or prowling posture, giving it a lifelike presence on your desk or shelf. If you're looking…
More information on this weave can be found here https://www.mailleartisans.org/weaves/weavedisplay.php?key=11 it has a very strong directional element that makes it look like scales. this is just a small section but larger parts will be…
Good day, Welcome to my profile, full of models and miniatures :-) I'm an Ainon3Dprint model maker and printer I have here for you RIS, RAS sheet, collimator rail, laser, flashlight for Glock 17/18/19 weapons and other variants... Tested…
If you read this, please leave a ❤😁 Update 9/10/2025 - Added a 5 sheet version --------------------------------------------------------------------------------------------------------------- My latest version of the integrated sheet…
A whole airbrush/spray paint booth for $3?! Yep! (well, mostly 😉) (somewhat of a WIP, will update with more images once my own build is complete!) I wanted a spray booth for working on tabletop gaming miniatures, but didn't want to spend…
This is my new holder for the metal sheets of the Prusa MK3 and Prusa Mini. It can hold up to two sheets each (2xMK3, 2xMini) and fits for the PEI and textured sheets (1.5mm thickness max). Step file is included. Print instructions…
I know it's been done before and shout out to all the other amazing models out there! This is just here if you need to/want to print a smaller sheet of this chainmail and have it be the same size rings as the other models. :) Once again,…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Looking for MORE upgrades for your enclosure? Consider doing this one!…
Holder for three Steelsheets , Mountpoints down on the long side off the Enclosure (left, middle, right). Druckplattenhalter für drei Druckplatten, anbau position unten(lange seite)links,rechts und mitte.
QUICK ALIGNMENT STOP TO LOCATE THE MAGNETIC BUILD PLATE FOR THE ELEGOO NEPTUNE 3 PRO. REPLACES BACK RIGHT BED SPACER. MUST RUN AUTO BED LEVELING AFTER INSTAL NO SUPPORTS NEEDED. PRINTS FAST MAY HAVE TO SCALE =/- DEPENDING ON YOUR ADHD/OCD…
An easy to print tool to keep the bed sheets in place. 100% infill recommended Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Any PLA Any Category: Organization
Used Poly.cam to scan a sculpture of a Cheetah Sitting Down. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here:…
Jan. 23, 2023 Update: Added sheet holder for Voron 0. The slots are 1.5 mm wide and 128 mm in length Added the 350 mm size holder without logo as STP for customization.…
A holder for 4 Creality K1 build plates.
If you haven't lost a tent peg or tripped over a peg slightly above the surface of the ground, or the edge of a ground sheet, you have no use for this model! If you have, read on. EASE OF USE Simply hammer in the pegs as you usually…
After using "IQOS TEREA/HEETS 1x10 clip case 2019" we knew 10 bullets it's not enough. So here is a 2x10 catalog. Perimeters: 5
This is a remix of the excellent, well thought out print sheet holder designed by Waldmops. This version removed the middle portion of the hex pattern and rounded the two outside corners. Overall, the changes reduced my print time by ~2…
Template to make it easy to cut shields for the Prusa protective face shield Print instructions Just any filament will do
Simple 3 and 5 build plate holder for Ikea Platsa Cabinet. Pre-drilled holes. Needed 20mm screws. Added two differents sizes, for 3 and 5 plates. And modified with holes design. Updated using internal pre-drilled holes on platsa. Printed…
Holds up to 8 4x5 film sheets.
I've updated this model to mount steel sheets on the prusa enclosure. It fits perfectly in the back corner of the prusa enclosure and can hold up to 4 sheets. There is a slight offset between each sheet to quickly pick the right sheet.…
Pretty much a direct copy of this product on amazon . I decided to try out the printing technique as explained in this post: https://blog.prusaprinters.org/model-with-prusaslicer-modifier-meshes-tutorial_30438/ I printed it with 0 top and…
Remixed a very nice model, but reduced the number of sheets to 2 (I have 3 in standard rotation: smooth, satin, and tex. Mount directly with 6mm M3 bolts. For mounting point suggestion check the original model explanatory pictures
Meet Charlie, a charming 3D model of a playful cheetah cub that captures the essence of wild adventure and youthful curiosity. With his spotted coat, expressive eyes, and relaxed pose, Charlie is a nostalgic piece for collectors and an…
My wife was looking for a way to stack Multiple sheet pans in the Refrigerator for bagels. These stackers started out from a set from Heckler off Thingiverse but had to modify it to fit larger pans, they were made to fit Nordic wear, or…
A cute sitting cheetah model, enjoy :) Easy to print, only one support under cheek needed. I use it as a decoration figure.
The sheets have a thickness of 1,2 mm, when using a 0.6mm nozzle you can use vase mode. Using a brim is recommended.
Update 5-Jul-2021: Added a mid section to the 45 version as sometimes under heavy agitation the film edges will poke out the sides. ---------- Not blocking commercial on this one, and included the Fusion and Step files for you to improve…
Remixed model to fit the print sheet of the Bambu Lab X1 / P1P Remix? Please remember to select the same license as from this model when remixing. Commercial use: Even if the license forbids this I agree if you show this model to your…
Sheet Pan Organizer, printed in PETG
Chester the Cheetah Mascot for Cheetos
JERRARI3D.com Modular solution for storing large steel sheets under your enclosure or table top. This version is FULLY ADJUSTABLE in width and depth Supported Printer Sheet Sizes Ex. Prusa XL, Voron, etc. Minimum sheet size: Any width x…
Extended Stability Feet to connect 2 Prusa Steel Sheet Holder and / or Prusa MINI Steel Sheet Holder based on Angelo's model
UPDATE 05/04/21: Files added for Prusa Mini build plates. ------------------------------------------------------------- The Expandable Steel Sheet Holder by @Whity is a great design and I was looking for a way to incorporate it into my…
None of the sheet holders I found on this site fit my needs. So I decided to design my own. I noticed the protruding rail of the original spool holder that comes with the MINI+. When adjusted to a Prusament spool, the rails stick out…
This is a bed corner piece that acts as a stopper to slide your spring steel sheets against. When assembling my V-Core 3 I instantly noticed that it would be almost impossible to properly place the steel sheet on the magnet as there is…
Prusa Mini sheet holder - 3 fits Print instructions Printer Brand: Prusa Printer: Prusa Mini Rafts: No Supports: No Resolution: 0.20 mm (Speed) Infill: 10% - (Good for me) Time: 5h 1m Filament: PETG Note: -printing on Prusa Mini, is need…
Organize Your Workspace with Our Free 3D-Printable Build Plate Wall Holder! Are you tired of cluttered workspaces and looking for a smart storage solution for your 3D printer build plates? Introducing easy-to-print Build Plate Wall…
A new redesigned version GEN2 Steel Sheet holder is available now: GEN2 Steel Sheet Holder V2 for Lack Enclosures _____________________________________________________________ The Gen2 Steel Sheet Holder for Prusa MK2.5 and MK3 is part of…
This is a life hack for those who are daily writing their music! Print and enjoy the music!
Model for holding up to two Prusa XL steel sheet. Two additional feet for better balance and stability. Print instructions Steel Sheet holder can only be printed with the Prusa XL Feet can be printed with a smaller printer Steel Sheet…
