Counting matching models…
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
Different sized shelves / trays for your Ikea Skadis wall. 1 Extra Long or 2 Extra small shelves will fully span a 36cm wide panel. (The Extra Long may be beyond most printer beds). To get the 2 Extra Smalls to span the distance, you'll…
This is a stackable shelf system designed to be easily printable, robust, and filament efficient. Stack your shelves vertically or horizontally and free up space on your desk! The design prints without support and is easily assembled with…
Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf? It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of…
Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…
These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…
A simple shelf bracket with a honeycomb pattern! Here you can find two more designs I made from this shelf bracket. 240 by 200mm. Take the long or short side up. You can also simply scale the shelf bracket. The holes have a diameter of…
Model includes 0.25" diameter holes for screwing into the wall. It also has a recessed back area sized for 3m command strips, I used the 16 lb package with just 2 so it supports 8 lbs. I printed with a 0.4mm nozzle and 0.2 mm layer height…
Definitely my favorite addition to the Stackable Shelf Organizer so far! This is a drawer organizer in various sizes that is fully compatible with the parent design and simply drops into one of the shelves. You can use the organizer with…
Shelf for Ikea Skadis board that can be assembled into continuous row and uses relatively small amount of filament. Printing Print without supports, take care not to place the bracket on the print-bed with the hooks overhanging. Assembly…
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
3D printable Filament Shelf Brackets make storing your filament a breeze! No supports needed. I recommend mounting a bracket to each wall stud. ¾" ID PVC Pipe (1" OD) will snap into place between brackets for easy assembly. EDIT 5/6/24:…
Modulares Regal für Toniebox-Figuren. Die einzelnen Waben wurden vollständig neu aufgebaut und bieten jetzt einige Vorteile: Dünnere Wände, damit deutlich besseres Gesamtbild Unsichtbare Verbindung, an der Front sind nur die Kanten der…
It is able to be printed on a standard ender 3 bed. If you decide to remix it, even on other platforms, please give credit. From my experience, this model prints very well in PLA and Bambu Lab PETG HF but has some difficulties with the…
I wanted some fridge magnets of these shelf mushrooms. I remixed the original file with circles on the back to accept 10mm magnets.
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every…
This is a shelf and shelf support and for the Honeycomb Storage Wall (HSW). The shelf is a the standard wall-honeycomb-part.stl with side walls added. Please note that some of the honeycombs that may look complete on the shelf supports…
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
This is a fully customizable modular cube that is wall mounted, you can print any number of module and interconnect each other to create anything you want. With it's many differents modules you can change plates to suit your needs, from…
Large metric 16cm version of the Mushroom Shelves. Scale to your liking. The newly designed bracket is printed in place (upside-down) and will scale with the individual shelf model. Design #5 and #6 have been added in this remix Update!…
Introducing the Voronoi Shower Shelf – a perfect blend of style and structural efficiency. Crafted with meticulous attention to detail, this 3D-printed marvel maximizes strength while minimizing filament usage. The elegant Voronoi pattern…
New, NEW Screw Wall! Check it out, its much stronger than the Honeycomb wall. https://www.printables.com/model/544779-screw-wall Works great, use it for tools or a shelf. No support is needed. Check out all my other Honeycomb Wall designs…
This cute chameleon is perfect to give some color to your shelves or just as a decorative piece for any room. We suggest to cut this model in three separate parts and then glue them. This allow you to scale the tail to fit perfectly to…
This ominous raven sculpture perches silently, casting its watchful gaze over any shelf, desk, or display space. Designed with stylized layered feathers, exaggerated features, and a brooding stance, The Shadow Raven is perfect for…
Some small shelves for the IKEA Skadis board, to display some small prints or other small things. I remixed the design from the shelves of CSD_Salzburg 's IKEA SKADIS Container-/ Shelfset .
Shelf holder for repair wardrobe shelfs.
Streamline your display setup with the 3-in-1 Display Shelf! Easy to print and assemble, just stick the pieces together! Designed for filament conscious printing, this stand features three interchangeable shelf configurations, making it…
a basic shelf for the honeycomb wall in various variants. 13,5 x 7 cm 8 x 7 cm 8 x 6 cm 8 x 5 cm Just look for my other useful stuff for the Honeycomb Storage Wall.
This is the foldable Version of https://www.prusaprinters.org/de/prints/59978-wall-mounted-modular-hexagon-shelf Its designed to be printable in one piece and needs no support Mounting Video : https://youtu.be/-b9joHg71K8 Parts: 1)…
A 10-inch rack mountable shelf for rack! It comes in two variants. One with a slots pattern, and another with a hex pattern. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have…
The wall-mounted toilet paper holder with a shelf for a mobile phone. Timelapse video: Print instructions 2 x 6mm Wall Plug 2 x 3mm Screw
I needed a way to display some of my prints, and I wanted it easily portable. So, I designed a two tiered display shelf that can easily be broken down and reassembled without the need for tools or hardware. To make one unit, you'll need…
This is a quick and easy bracket to print for filament wall shelves! This is a simple wall shelf for filament spools designed to save storage space. The advantages of this design over running a single rod through all spools allow the user…
There are several different versions. 3 or 5 Pegs With or without front lip With or without print supports needed You can even install these upside down so the on the underside.
Some simple shelf brackets. Use flat head screws so you don't split the layers Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: who cares PLA/PETG Black Notes: print…
I couldn't find a shelf for Skadis that could be printed in one part and that fit on the Prusa Mini build plate. Inspired heavily by Ikea Skadis Shelf by xyren , I made one. The shelf uses 4 peg holes and more can be mounted next to each…
The hexagon tree wall art with planter pots and shelf. The pots size is 80x80x80 with drip tray. The shelf for pots can be mounted with screws, but I used strong double-sided tape and it holds very strongly.
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 I'll show you how to build a very smart looking shelving system that includes a hidden giant clock in the edges of the shelves, and…
This shelf bracket was designed by me, I am an architecture student and I love creating models of elements related to architecture. You can check out my profile to find more models like this. You can print them very easily, not many…
Multiboard screwdriver holder/shelf, robust design scaled for maximum volume of ender 3. Shelf is prepared for multiboar system: www.multiboard.io I also added support for more rigidity. V2: 7mm storter for better fit on Ender build…
We designed these desk shelf legs generatively in Fusion 360 and produced them with SLS using the Sintratec S3 printer and robust PA12 nylon material. After printing and cleaning, we simply screwed the legs onto a wooden board and voilà:…
Heavy duty wall bracket for shelves. When properly attached and shelf no longer than 35cm, the bracket can hold up to 100kg. (I carefully hung onto one of it with my body weight and it held without any problems. The holder can certainly…
Intended to be used with this or this box
Shelf bracket. 2 holes for 4.5mm screws.
I recently fell in love with the Honeycomb Storage Wall (HSW) but couldn't find a good generic bucket to keep items in. The shelves weren't deep enough and the cups were too deep. The HSW bucket-shelf was exactly what I wanted but…
A slightly remix of "Harry Potter Kinder Joy Shelf" by @PavelNytra_273350 Base box 4x3 and logo are merged to one file that can fit on ~245x180mm print area. Also additional wand (credits to Duffy_544591) for pencil holder etc
Small 180mm X 110mm Shelf that clamp to a desk up to 40mm thickness. Printed with 3 wall use around 220gram of filament including tree support The tread where a little tight on my print I use PTFE lube on the tread.
Two versions of the Drippy Display Shelfs. The pattern fits together so that they can be hung next to each other to make a longer shelf. Or be mixed up as I have done. Before hanging, I highly recommend printing this model so that the…
So, I had purchased some of those decorative “floating” shelves from the local bigbox hardware store. Then when I went to install the shelf, I realized how cheap this stuff is and how bad the design of the hidden bracket is. I felt as…
Modular Corner Shelf System Turn unused corners into serious storage. Stop wasting corner space. This modular corner shelf system lets you build clean, strong, and fully customizable storage exactly the way you need it. Print one level —…
Wife wanted to get the toothbrush off the counter top to declutter. Proposed a shelf over the outlet. I saw others replace the entire outlet cover with the 3D print but she didn't want to have a bunch of covers stored away and lose them.…
Simple shelf brackets with access holes for screws. Surprisingly, I did not find a bracket on Thingiverse (where this was originally posted) that I was quite satisfied with, so I designed my own. The access holes are enlarged to allow for…
A shelf to hold 5M printer essentials. Sized to fit the glue bottle that comes with the printer as well as other items. For the center mounting bolt be sure to use an M4 jam nut for clearance to print head. It gets very close to the frame.
Looking for additional storage space and ways to extend the use of the Ikea Skadis organizer? This shelf mounts on top of the Ikea Skadis board and adds 190x 80mm of storage space without loosing the use of the upper holes. 4 shelfs will…
Simple to print. Two different tolerance available for mounting brackets. If brackets are tight to insert heat Voronoi shelf using hair dryer/heat gun and insert the mounts, this gives a tight and rigid connection. Refer images for best…
Inspired by Vincent Groenhuis Auto Rewind Spool https://www.thingiverse.com/thing:3200204 I decided I needed to make under the shelf / Hanging Spool Holders for these. This uses the metal rods and 608 bearings from the Prusa MMU spool…
This is a remix from orginal shelf-3.stl file from RostaP. I raised the front lip of the shelf to avoid round tiny things to fall, the original one is too low. Printed: PLA // 215C // 65C // 15% Grid Infill // 4 perimeters
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
A shelf which can be attached to your faucet. For storing a sponge for example. Two variants for the shelf one with slotted holes and one with hexagon pattern. If one shelf is not enough and you need more space see my double shelf model.…
16cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects. A small bump is added in the middle for extra security. The panels can be placed side by side.…
A simple 20×12 cm wall shelf with additional braces for improved rigidity. You will need 3 M3 screws and nuts for the assembly. A solid ("one piece") version is available as well. For the best possible finish print as shown on the…
Remix of this design ( https://www.thingiverse.com/thing:4276960 ). I recreated it to make it fit my needs and be printable in one solid piece on my Ender 3 V2. Both of the legs can be printed at the same time on my 230 x 230 mm bed. It's…
Storage shelves with walls to allow for more stacking.
I created a shelfing system using a large hexagon with connection features. The shelves are large and will need a build volume of at least 350mm x 350mm x 350mm. I printed near the largest I could on the Prusa XL. Printing: I printed the…
Update: I added two more models that are printable without supports. I shifted the pin, so that it is flush with the surface and an all flat bottom model that surely will stick to your print bed. Shelf support for any type of shelfs. Want…
Bin for IKEA SKADIS. The model has attachable hooks so they can be easily reprinted if they ever break. Sizes Small Size: L: 90mm / W: 90mm / H: 40mm Medium Size: L: 170mm / W: 90mm / H: 40mm Large Size: L: 245mm / W: 90mm / H: 40mm…
Three different templates for footprints, bootprints and elf shoeprints for the Christmas elf (elf on the shelf). The stencils are set higher on the tracks so that they can be placed over the tracks already created without smudging them.…
Update: Now featuring multiple metric sizes, with imperial versions linked below. This is a replacement 5mm shelf support pin featuring an L-shaped bracket design. Unlike standard cylindrical pegs, the flat bracket distributes the…
Mounting Video: Update: On request, here ist the foldable Version: https://www.prusaprinters.org/de/prints/61814-wall-mounted-foldable-modular-hexagon-shelf-print- There are 3 parts: 1) Template.stl => use this to align the screws, screw…
Another 3D printed shelf but with a secret! 🤫 Ok, maybe not that big of a deal… But it's super handy! After mounting with 3 countersunk screws, the top half snaps on very satisfyingly and slides out with a hard stop to avoid falling off.…
This is an OpenSCAD model that is designed to be used with OpenSCAD's customizer facility. Width, depth, height, thickness and corner radius are all fully customisable using OpenSCAD's customizer facility. See: openscad.org for more…
The shelf support brackets even when printed with PLA can hold over 100 lbs (tested) and have built-in mounting holes to attach to the wall. I printed mine on the sides with support material to hold up the hexagon webbing at 50% infill…
CAD model, 9.75" wide, 8" tall, 1" thick along the main section. The corner screw hole boss is offset so you can attach a screw to the wall/shelf. The upper wall screw is angled so that if you have the lower hole lined up with a stud, you…
You can see a great example of this HEX Panels on Engineericly 's YouTube Channel. I printed mine with 100% size (you see it on the pictures), but next time I would rather use 120% or more, because it makes threading the LEDs easier and…
These are shelf supports (2 different sizes available) which are compatible with all Honeycomb Storage Wall accessories, both inside and out. I also fixed the chamfers inside of the model I borrowed from. For the larger ones (or smaller,…
very simple design i made with Tinkercad (i'm quite new to 3D printing, and this is my first design with Voronoi schemes). Since my girlfriend moved in, i've seen the amount of bottles in the shower multiply greatly, and I was in need of…
Love the hidden shelf design from the past, but wanted a modern version to fit in with the floating shelves I have. Dimensions based on a medium version of these from Target
Hexagon shelf for large Funko Pop! Connections on every side that slip perfectly together. Design originally uploaded to Thinkgiverse by https://www.thingiverse.com/izikdal/designs , just linking here for ease
2024-01-23 update nová verze poličky - dno s motivem Voronoi + výška dna zvýšena __________________________________ Bylo nutné nahradit původní poličky a ve zdi zůstali hmoždinky, využilo se původního umístění šroubů (nejsou symetrické)…
4 Different Shelves The 4 shelves fit together easily. They are all hinged or dehiscented, so you can choose how you want to position them. They can also be used as decorative pieces on a table or piece of furniture if you don't want to…
Small shelf that can be screwed to a wall. You know, to hold stuff. Originally designed to hold a Sennheiser EPOS base. Category: Organization
The kids and I had this silly idea about having a toilet for our elf on the shelf. One week later and it now exists. For the benefit or the detriment of all mankind. You decide. And Happy Holidays. Build video here:…
🔧 Version 2.0: Reinforced & Print-Friendly The original design is unchanged. The structure has been reworked so the bracket is stronger, easier to print and easier to mount . Thicker body: now 15 mm instead of 10 mm for noticeably higher…
I created this snowman suit to stuff the Elf on the Shelf into. Enjoy.
This is the clip that works as an insert to fix wire shelves onto a tube. It is designed to fit 1in thick tubing from commercially available wire shelving (Home depot/lowes). I'm told it's called a shelf split sleeve. **Added a more…
A customizable and modular mini shelf system for square and hex shelves. Also includes the possibility of "engraving" the shape of the base of a Benchy into a wall for a perfect display of your benchy collection. :-) Both the width and…
A stylish shelf bracket for mounting a shelf onto a wall. I recommend printing with PETG to prevent sagging. I printed it using Prusament White PETG with: 5 perimeters (0.4 mm nozzle) 10% gyroid infill. No supports are needed. The shelf…
Do you have leaning towers of filament in your workspace? Put it on the wall ! Here's everything you need! Check that your wall studs are 16" apart and mark them Print a full set of brackets (4 pieces) or as many as you like (1) end cap…
A cool looking shelf ! will hold figures statues and more! There is holes for wall mounting ! good to showcase miniature Print on flat surfaces of shelf!!! Commercial Membership – all my models with a commercial license:…
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
English : It's a rack shelf mount 19" size 1U to place a modem.The object is printable in three parts and must be assembled with screws M3*10 and washers on each side. The slotted holes allow a shelf adaptability to small differences in…
KEY BENEFITS: strong compact no print supports (optional) can be reinforced with M6 washer (optional) 3 marks (5mm) for offset from the wall
Use this hook (just glue it in the recesses in the model) to hang this organizer on a Skadis board: https://www.printables.com/model/304196-gps-skadis-hook-ng-step
The wavy decorate shelf is 71cm wide (28in) and can hold up to 5Kg securely. Installation notes: 1. All 6 pieces has their part name engraved in the back 2. Start with the ‘left bottom’ part 3. Connect ‘left middle’ and ‘left right’ parts…
Folding Shoe Rack or Shelf - Print-in-Place When the whole family comes to visit again, just unfold your foldable shoe rack and the mess will disappear. It could also serve as a temporary shelf, e.g. for DIY projects. Printing Print the…
Gridfinity Shelf for the Honeycomb Storage Wall . I designed this to hold firm on your Honeycomb Storage Wall. Compatible with all your Gridfinity storage containers. Get your Prusameters… Post your Makes! If you like this project, please…
Super strong shelf bracket, perfect to store your tools 3 sizes, let me know if you want an other size !!!
