Counting matching models…
After printing hundreds of originals, I decided to re-model it myself to make some small tweaks and changes. The original OpenSCAD code resulted in slightly misaligned tolerances, needing the tolerance to need to be set higher than…
This is technically a remix of the Hexes for LEGO mini figures (re-modeled) by @Nat_ Although I have redesigned this in Fusion 360 from the ground up I have marked it as a remix to credit them, please note this reworked version does not…
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
I was looking for some entry and exit tiles to print for our Gloomhaven sessions but couldn't find any. Therefore, I created them according to the designs in Jaws of the Lion, Gloomhaven, and Frosthaven rule books. These tiles fit the…
These water tiles are cut into hexagons and sized for Gloomhaven. Printing them on their edge provides the most detail to the surface, It is recommended to print with a brim but can possibly be fine without one. A 1 and a 2 hex tile can…
What year is it, 2008? We're still obsessed with Settlers of Catan, so much so we needed a custom game board. Unlike the more elaborate 3D sculptured pieces out there, this one requires no painting if you print in different color…
No more mess in your spices :-) the hex base breaks long extrusions, which should eliminate warping. It also reduces filament usage.
You can center mount this little segment of Hexwall for some hooks or small items like the sticky note holder.
StageTop Hexagonal (Hex) PlayTile for Battletech, Gloomhaven or other Game but with indented hexes. Remix from: https://www.printables.com/model/438818-stagetop-hexagonal-hex-playtile-for-battletech-glo
The Hexes Have It Collection of Hexes for use with board game Gloomhaven, Frosthaven, or a similar hex based game. The hexes measure 1.5 inches from corner to corner of a single hex and 2-2.5mm thick. Three flavors included: Ridge w/…
This insert requires minimum recourses while being very sturdy. Fits Catan base + seafarers tiles (total of 51 hex tiles). The top guard piece prevents the hexes from falling off if you store the Catan box vertically. Design is based on…
Two types of hexes for both Memoir 44 and Napoleonics. Basic hexes are meant as straight replacement for a lost hex or to design a new one by drawing/painting/etc. These have same dimensions for each respective game. Hill hexes are meant…
Love this amazing game, but it was a bit amazing how the hexes could move around vs each other. So I designed these trays for the hexes that attach to each other magnetically. It raises the board which is lovely for table presence, and as…
Big thanx to the original author
These are some things that I designed for the boardgame Expeditions. They are meant to support setup, playing and storing the game. Here's what you need to print: 5x Tiles - These are hex tiles to fill the empty spaces between the game…
An easy print overall with no supports. Feel free to scale in the Z direction (or X and Y together) if the dimensions are out of line with your expectations. Measures 103mm in diameter and 126mm tall.
I wanted something to adhere a Honeycomb Storage Walls to my walls using Command adhesive. I saw a non-parametric model that was kinda close to what I wanted , but it only did one axis, so I created something similar with OpenSCAD. I've…
These are a couple of models I created that follow the ArmyPainter hex cell style used in their color charts. The ArmyPainter133.stl provides a cell for every paint in the ArmyPainter complete paint set (134 colors). The color chart…
This is how I came up with the naming for the BT Hexes: Breakdown: A simple way to explain is by example. If you look at something like 1L12L23L3T(B) it looks like a lot but its pretty simple. The first triplet is 1L1 this means there is…
I'm currently creating 3D versions of the Oathsworn hex terrains. I didn't take the terrain pack, as I wanted to use it as a modeling exercise. If other people want to do the same, here's a good basis: every possible terrains hex in the…
Some over-sized, futuristic ground mines for a generic SciFi setting, at 6mm scale - adapted for hexagonal clip tiles. There are 10 variants (20 if you mirror them for printing). This was a quick remix and fix-up of other people's models.…
Some over-sized, futuristic ground mines for a generic SciFi setting, at 6mm scale. There are 10 variants (20 if you mirror them for printing). This was a quick remix and fix-up of other people's models. I've re-scaled them for approx…
These are some simple hexes that I made that are a bit longer than normal. They are about 7mm long in all. The fit is pretty tight so if you don't have that great of tolerances on your printer you may have to do some sanding but it isn't…
This model is remixed. Should be printed with hexagons on the bed. No support needed. Feel free to scale it to fit your plants.
As with my Wizarding World modified hexes , these hexes add Dune crests to the hexes appropriate for the Lego Ornithopter set . Includes a Bene Gesserit hex, depending on how you want to count Jessica, and a double-height hex for the…
I grabbed this geometry and remodeled it, extruding the walls deep enough to accommodate our sunglasses and eyeglasses.
I designed this for use with Forest tiles (www.thingiverse.com/thing:2931688) and Dome Cities (www.thingiverse.com/thing:2931652), but I scaled those tiles down so they'd fit on the board hexes easier. I timidly scaled those down by .5mm,…
I don't have multi color capabilities since I have a Mini. Also, I like having each swatch labelled with the filament type.
Remixed this index grip to better fit with my Lynx. It's been a while since I worked on it but I believe changes include: Shortening to better fit Lynx foregrip space Replacing the securing key with bolts (I believe approx M4x25mm) Adding…
Remix of these models: https://www.printables.com/model/1474221-snap-on-coreone-extruder-fan-grill-cover-remake-of https://www.printables.com/model/1389331-prusa-core-onemk4-honeycomb-fan-grill-cover-easy-i I merged the snap-on…
Inspired by the whirlpool portal scenario from Tabletop Monthly. Build a boat straight into the whirlpool and you'll come out the end of a different one. An effective way to cover large distances on large Catan boards. Fq97's desert tile…
After getting some of the Lego Hogwarts Banners for the holidays, my daughter (and her mother and I!) wanted a neater way for her to keep her minifigures. Nat_ 's Hexes are a nice way to do that and I decided to zhuzh them up some by…
All hexes require multi-color painting in the slicer. Hestia has parts (the inner flame), and Hades has modifiers for the wreath. You will need to split those files into parts. If you want to use them as coasters, I recommend PETG or…
Add more orange to your enclosure. These can be glued into the indents in the original part. Thanks DaHouzKat for the folding doors, they work amazing. https://www.printables.com/model/557666-original-prusa-enclosure-folding-door
This is a classical collection of mathematical pieces called Tetrahexes (meaning "4 hexagons"). There are 7 possible connected configurations of 4 hexagons. You can play several games and puzzles with them, such as SEVEN or the puzzles…
4. Fields (Grain Resource) Hexes. 4. Forest (Lumber Resource) Hexes. 4. Pasture (Wool Resource) Hexes. 3. Mountains (Ore Resource) Hexes. 3. Hills (Brick Resource) Hexes. 1. Desert (No Resource) Hex.
Very simple remix of Screweye's “Reaper Paint Hive Storage” The original model has been scaled up to fit the Turbo Dork paint bottles, which are wider than the traditional Reaper/Vallejo/Scale75/The Army Painter paint bottles. These…
Identify loose metric screws, bolts and nuts in seconds: push a bolt through the smallest hole it fits (M2 to M12), drop a nut over the hexagon that matches (M3 to M10), and measure the screw length on the 80 mm ruler, which has a stop at…
This is technically a remix of the Hexes for LEGO mini figures (re-modeled) by @Nat_ Although I have redesigned this in Fusion 360 from the ground up I have marked it as a remix to credit them, please note this reworked version does not…
4. Fields (Grain Resource) Hexes. 4. Forest (Lumber Resource) Hexes. 4. Pasture (Wool Resource) Hexes. 3. Mountains (Ore Resource) Hexes. 3. Hills (Brick Resource) Hexes. 1. Desert (No Resource) Hex.
![Tamiya TT01 wheel hexes [different widths]](https://media.printables.com/media/prints/425363/images/3518554_bf45835a-4fb6-46ab-9f83-35d3528e8070/20220117_114136.jpg)
