6,463 models
So I love how many of us love the original benchy. The only thing I've always found a little pity it can't swim. Since I have drawn a few ships so far, I just wanted to try to draw a small, floating benchmark boat. Of course, it's not…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
Some sample G-Codes to benchmark the extrusion system of selected printers. Find the full tool and a sample evaluation here: https://github.com/CNCKitchen/ExtrusionSystemBenchmark
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
The must have tool for your workbench !!! Only 3,52 gram's !!!
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
Stay Puff Marshmallow Man.
Print approx. €16.51–€20.18 excl. taxPreliminary estimate for one variant
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant
Butterfly bodies in which a folded banknote can be put as fanned wings. The butterflies can be stuck into a flower with a wooden skewer (shish kebab or similar). The wooden skewer used in this case is about 3mm thick. Suitable for all…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Zusätzliches Material: für die Messstab-Halterungen werden 2x Sechskantschrauben M6x20mm benötigt nach Bedarf ein O-Ring für den Staubsauger-Adapter Hinweise: Alle Teile können ohne Stützmaterial gedruckt werden Die Gewindestutzen auf der…
Print approx. €9.82–€12.00 excl. taxPreliminary estimate for PETGSource material: PET
Festool Mobile drilling attachment MB 40 - Accessories Do you already know our Mobile drilling attachment? The MB 40 mobile drilling attachment is your companion when precision is required. Print your own Festool Accessories for the MB 40…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
The Messerchmitt Bf 109 (also known as Me 109) was one of the most iconic aircrafts of the Second World War, and is across its variants the most produced fighter in history. It entered service in 1937 and was at the time seen as very…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
These are two paint mixing drill attachments that will use the power of your drill to mix spray can paints/primers, as well as model paints. They are inspired by one of Adam Savage's favorite tools: The spray-can mixer model can accept…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
Description: Enhance your drilling operations with this attachment that ensures a dust-free working environment. Its sturdy construction and integrated grid effectively prevent the spread of drilling waste. It’s the perfect addition for…
Print approx. €3.89–€4.75 excl. taxPreliminary estimate for one variant
This uses 4" dryer ducting hose to connect a fan to a nozzle for blowing air under the covers. I tried this with a box fan, and also a squirrel cage blower fan. The box fan in this design works poorly. The pressure in front of the fan…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
I printed in ASA to be able to withstand the heat in my car. Edit 6/18/24: I added 2 files one for 162mm length phone w/ case and a Step file to be able to adjust the model to your liking. Just make sure the pegs that go into the vents…
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Küken…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This is another model from my Vapor's World collection . Protection for Geekvape Zeus Subohm Tank. If the mod accidentally tips over, there is a high risk that the glass tank will break. This protection prevents that. No support required.…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
I designed this spoon, since the detergent I bought did not come with a scoop. It is pretty accurate to have a volume of 30ml when filled to the brim. The design is stable and strong and can be printed lying on the top side without…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Messerschmitt Bf 109 This is another plane for your collection : the Messerschmitt Bf…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
Introduction A simple pair of magnetic holders for attaching flat bellows to a metal lathe as ways covering. I used this 5/8" tall flat bellows available from McMaster Carr: https://www.mcmaster.com/1320K111/ These bellows are made for…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
Overview I designed a telescoping rod that receives various attachments. The attachments included today are: A back scratcher A pivoting axis that takes a 32mm neodymium magnet. I am also planning a few more: A pivoting axis that accepts…
Print approx. €14.88–€18.19 excl. taxPreliminary estimate for one variant
Flying Dutchman / SpongeBob
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
PETG recommended for strength and flexibility at 20% infill with 4 perimeters. (Some petals snapped with less infill.) No supports needed. Mounts horizontal or vertical, including the underside of a shelf or on the ceiling, depending on…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET
Das Problem Der Pumpenfilter deiner Hisense Waschmaschine sammelt regelmäßig Flusen, Münzen und Verschmutzungen. Beim Ablassen des Filters läuft das Wasser häufig unkontrolliert über den Boden – eine lästige und zeitaufwändige…
Print approx. €6.52–€7.97 excl. taxPreliminary estimate for one variant
I have both Yaesu and Icom radios in the shack and wanted a common mount fo the microphones. This adapter modifies the Icom microphone “clip” to the “button” style found on CB and Yaesu microphones. It fits in the mic ok, a small drop of…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Aus 2 bestehenden Modellen habe ich mir ein passendes Teil "gebastelt". Passt auf eine Dose mit ca. 57mm Durchmesser. I “made” a suitable part from 2 existing models. Fits a can with approx. 57mm diameter.
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
OUTDATED : see https://www.printables.com/model/1038392-weihnachtsschmuck-glocke-2024-viele-sprachen-chris Not much to tell - it's selfdeclaring. I printed with a 0.4 mm nozzle and 0.15 mm height. No supports needed Created with OnShape →…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
This watering can attachment makes it possible to water with pinpoint accuracy even with large watering cans (10 L).
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
ReMixed Andrew Burkhart's KitchenAid Mixer Attachment Holder which was a remix of tacoh's Shelf Bracket. Resized for 1 inch wire spacing on the wire rack, made the bases a bit thicker and added a backstop to the top piece. Printed in PLA…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
Print approx. €6.54–€7.99 excl. taxPreliminary estimate for PETGSource material: PET
4 Farbdruck beim Layer change rot weiß schwarz Das blaue Band habe ich angemalt.
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
My Dyson DC07 hose has an arch on it and did not allow me to suck the air out of my vacuum bags. This attachment will snap into your Dyson hose and allow you to get all the air out. Printed with PLA but PETG will work as well.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
This vacuum attachment is meant for vacuuming in tight spaces. Specifically, it angles “down" along the long edge for concentrated suction.
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for PETGSource material: PET
Copied the 3D Printy's base and spring. Made a simple two-finger welcome for placement on the car's dash, refrigerator door, etc. The 6 x 3 mm magnets are inserted into the base to secure the assembly to a metal surface. Let me know if…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
When the cheap and flimsy hook that came with my Aiper Scuba SE broke, I realized it would be super easy to design and print one that is much sturdier. I designed it in two parts so the pool orientation is vertical and the hook is printed…
Print approx. €6.03–€7.37 excl. taxPreliminary estimate for PETGSource material: PET
ein Behältnis für Abschminkpads und Wattestäbchen
Print approx. €3.16–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
Because I use them to wipe the print surface. Uses 2x M3 nuts, and 4mm, 6mm M3 bolts.
Print approx. €3.70–€4.53 excl. taxPreliminary estimate for one variant
Ein Rahmen für ein 7 Zoll Waveshare Display
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Vakuum cleaner attachment for drilling holes. It holds itself on the Wall. Printed with 0.2 layer height in PETG. Print took about 3h 7min. Use support on the inner ring.
Print approx. €2.48–€3.04 excl. taxPreliminary estimate for PETGSource material: PET
We were updating our church to in ear monitors , but didn't have a digital board to have an aux for each person, and I came up with this idea. Use the Behringer MA400 as a partial personal mix for instruments. Then the Mackie HM-4 for the…
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for one variant
This is a monitor webcam mount to use a GoPro as webcam. It's designed for a Dell UltraSharp 2312 monitor. It should also fit other Dell UltraSharp monitors with the same kind of edge. For the screw, you will need a M5x30 screw with a hex…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Dieser Weihnachtsstern besteht aus 3 Teilen, welche nach dem Druck noch verklebt werden müssen. Eine schöne Weihnachtszeit und viel Spaß beim Duck, über eine Rückmeldung würde ich mich freuen.
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for PETGSource material: PET
The model is print-in-place, no supports needed. Works best with headsets having a headband-depth of ~30-35mm. When the thumbscrew is in place, you can tighten the hook by turning it. Be careful not to screw it too tight. I used black PLA…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Mon Mothma Brooch : Andor This is not an exact replica. I noticed that the 9th sister stature was very evocotive towards Venus Figurines and decided to put a bit of that emphasis into the brooch. So Lets just say its part of a Chandrilian…
Print approx. €2.51–€3.06 excl. taxPreliminary estimate for one variant
Unfortunately, the otherwise rather nice budget guitar HBO-850 from Harley Benton comes with a simple pickup preamp without tuner. The preamp fitted is really long and slim, so it is difficult to fit other preamps into the same hole. I…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix from zoltanf and Chrismettal - Binary-6 works, but I also took inspiration from w00h , misterT , Sonic_2_1 , & Lichtjaeger. Thank you to all !!! Modifications v12 Small changes in diameter to make installation of the spool…
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for one variant
Turn any benchy into your new chopstick rest with this cute little attachment. It fits right into the storage compartment of your favorite 3dbenchy. There is plenty of tolerance given, so your machine doesnt have to be calibrated…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This is a Lamp mount for the Bugasalt V3 It clips on the on the mounting porint on top of the gun the lamp is also just slided in. the Diamater for the lamp is 23,5mm. so it should fit all lamps that are slightly bigger then the diameter.…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Tischmülleimer/tonne -Stützen ggf. Füllen (falls Schwierigkeiten auftreten sollten) -Stützen vom Deckel (unten) entfernen. -Unterseite entgraten
Print approx. €9.18–€11.22 excl. taxPreliminary estimate for one variant
Slide on Laserpointer attachment for the Bugasalt V3 the attachment is slightly angled so that the laser is accurate at the optimal shooting distance at about 45cm - 1m this attachment is made for a cheap rechargeable cat toy laserpointer…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Print the male2male long flat side down Print the female 2 female like a teardrop The long one can also be printed with flex or tpu to give that real wonky feel The grooves in each allow you to stick in a toy like a ribbon or a…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Waschmittellöffel zum Dosieren. Just print it.
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
This holder has been created for 10" or 12" industry displays attached by a little consoles with screws into distribudion box. It's really helpful for testing HMI application in office or long term use in laboratory.
Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €7.21–€8.81 excl. taxPreliminary estimate for one variant
Hier handelt es sich um einen zweiteiligen Schmuckständer für Ohrringe und Ohrstecker. Die Höhe beträgt ca. 20 cm.
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
(English text below) Ist in einem E-Bike ein Bosch Powertube 500 / 600 / 750 verbaut, ist es nicht immer einfach, einen Zweit Akku mit passender Blende zu bekommen. Für mein e-Bike BH Xenion konnte mir mein Händler keine Blende anbieten.…
Print approx. €13.75–€16.80 excl. taxPreliminary estimate for one variant
Cílem projektu bylo získat jednotlivé šablony písmen abecedy pro žáky základní školy speciální. Ti se díky těchto šablon mohou fyzicky dotekem seznámit s tvarem každého písmene. Dále bude docházek k procvičení jemné motoriky s možností…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
(German below) English: Because I didn't like to screw or glue our new room ceilig, I wanted to attach our smoke alarm onto our nice Paulmann URail lightsystem Trails. For an easy attachment I used the genius but simple hookpart from…
Print approx. €2.39–€2.93 excl. taxPreliminary estimate for PETGSource material: PET
Update 05/23/2024: Now that Frantisek23 has further perfected his design , I definitely recommend his new solution and basically declare my remix obsolete. Since the EndRib_V1b Mini.stl model is no longer available from him in the course…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
Schmetterling Gelbsticker für Pflanzen
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
This attachment snaps into a Dyson DC07 Hose. Printed with PLA but PETG works as well.
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
This is a tough case for your Apple AirTag that keeps it secure and provides flexible mounting options. Design features Holds the AirTag tightly and completely protects the battery compartment, preventing it from being unscrewed…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
I made this small collection of cubes with some features to visualize the impact of layer height on the print quality.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…
Print approx. €6.53–€7.98 excl. taxPreliminary estimate for one variant
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
This is an old, generic percussive (thumping) back massager that came with a couple heads, a rounded one and a bumpy one, and my spouse requested a pointier version of the rounded head to target muscles better. I measured the threads on…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Optimal mit einer externen Führungsschiene
Print approx. €4.55–€5.57 excl. taxPreliminary estimate for PETGSource material: PET
Im Zusammenhang mit dem Bau eines Druckergehäuses ( PrintClosure-Projekt ) habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Die Abmessungen des Ausschnitts betragen 46,5 x…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET
The little black piece that attaches the pump to the flower, in the this Catit Flower Cat Water Fountain We lots one of ours (I think I accidentally threw it out?), so I used my caliper and fusion 360 to model a new one. Works great.…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Dust collection with 58mm attachment for vacuum. Replaces Dust Nozzle 416497-7 and has attachment for existing vs direct attachment of 58mm vacuum. Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: Yes Notes: I printed using…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €3.62–€4.43 excl. taxPreliminary estimate for one variant
This 3D printable ring fits securely around a Hydro Flask wide mouth bottle and provides a built-in loop for attaching a paracord handle. It's a simple, rugged solution for carrying your bottle on hikes, at the gym, or just around town —…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €4.28–€5.23 excl. taxPreliminary estimate for one variant
Comfortable handle with attachments designed for easier sanding. Easy to add a custom sanding block to the threaded arm. I printed this in Clear Polymaker Petg on Mk3 without any issues and the parts fit perfectly.
Print approx. €14.00–€17.11 excl. taxPreliminary estimate for PETGSource material: PET
AFL Richmond logo
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
I have uploaded two Gcodes for the left and right side. For each side you will need: 1 x M6x16mm ((=== Button Head screw 1 x M6x16mm []=== Round Socket Head screw 1 x M6x30mm ((=== Button Head screw 1 x M6 Nyloc Nut If you would like to…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Immer mehrere Werkstücke gleichzeitig drucken sonst Verzug-Genauigkeits-Spannkrafteinbußen! Stirnseite oben ist “gebügelt”, geeignet als Axialgleitlager, gute =geringe Reibwerte bei verwendung High Glossity Polymoph Filament und…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
This is a remake of As-seen-on-TV item, called Dust Daddy. In principle, it's just some straws and adapter. Straws should be purchased separately from the store. This version uses 9 of them, and they just friction-fit into the holes.
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
This is a horizontal mount for a Bachmann STEP power strip. The clamshell distance that's aligned with the openGrid has been optimized for a single 5 outlet power strip. I'm not sure how this will align with e.g. 2× STEP 5s with regard to…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
Es handelt sich hier um eine Aufnahme um mehrere Original Prusa Enclosure übereinander zu stapeln. Druck hat einen halt um Sechskantmuttern M3 einzulegen.
Print approx. €5.19–€6.35 excl. taxPreliminary estimate for one variant
This model uses the recess on either end of the cooler to attach wheels. This model is split into two pieces to allow printing on a MK4. The wheel attachment is held on with a ratchet strap that is threaded though the slots on either end…
Print approx. €58.98–€72.08 excl. taxPreliminary estimate for one variant
You have to have the gripper attachment.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This innovative model is specifically crafted to enhance the Xiaomi Round Button by adding a functional and aesthetic glow-in-the-dark attachment. Perfect for those who need to locate their device in low-light conditions, the attachment…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Dyson Outsize Absolute+ Vacuum Seal Bag Attachment I created this using the template from @M3D3. You can use it from most newer Dyson stick vacuums.
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
Hello, I made a tube attachment for a billy shelf to hang my kitchen items on. the diameter of the pipe I use is 2 cm and the screws used are 2.5x15mm. Of course, the qualification can also be used for many other things, there are no…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €3.12–€3.82 excl. taxPreliminary estimate for one variant
Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…
Print approx. €3.58–€4.38 excl. taxPreliminary estimate for one variant
I needed something to protect my solar filter… so I designed a rudimentary one in Prusa Slicer. It’s not great but it works for me. The slicer wouldn't export a .stl file for the bottom piece, so I only have the bgcode file for that for…
Print approx. €7.65–€9.35 excl. taxPreliminary estimate for PETGSource material: PET
🌟 Introducing LumiClip The ingenious glow-in-the-dark attachment 🌙 that brings a combination of safety, style, and versatility to everyday items. LumiClip shines brightly in the dark, ensuring you stay visible and your items are easy to…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
A wall mounted attachment holder for Eureka RapidClean Pro Cordless Vacuum. Made specifically for the two attachments which come with model NEC280TL, which the manufacturer neglected to provide a suitable storage solution. The arms…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 2 hours. Slicer settings: 0.3mm layer height, 4 perimeters, 40% infill (or more), print in mirrored pair Post processing instructions: Clean…
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for PETGSource material: PET
If you want to use the pedicure attachments from your Beurer FB 50 foot spa independent of the foot spa this adapter allows you to drive them with an electric screwdriver or drill. You can insert the adapter into the screwdriver/drill…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
The model features a tight fit for the AirTag to hold it securely in place. The outer circumference has a precise fit. I recommend wrapping it with 1 layer of tape to reduce slippage. The model has been tested and holds securely in place.
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for PETGSource material: PET
Für unsere Bonsais brauchten wir ein Regal auf dem Balkon. Die Regale sind oval, innen ca. 25 mm tief und haben die Innenmaße 170x130 mm bzw. 190x150 mm. Die Befestigung erfolgt über eine Klemmvorrichtung am Balkongeländer. Das Rohr hat…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
Tisk asi nejlepší na ležato s podpěrami. Možno i jemnější tisk, ale 0,2 funguje.
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
I found the pedicure attachments shipped with the Beurer FB 50 foot spa too soft, therefore designed a stronger one. If you don't have a Beurer foot spa you may try printing the model https://www.printables.com/model/973562 to attach this…
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
