P
PrintablesMontoro
Bolt Action WW2 German HMG
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
- Downloads
- 407
- Likes
- 30
- Rating
- 0
Search results: hmg
36 models
P
PrintablesMontoro
Bolt Action WW2 US HMG
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
- Downloads
- 288
- Likes
- 31
- Rating
- 0
P
PrintablesMontoro
Bolt Action WW2 US HMG Ammo Support
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
- Downloads
- 214
- Likes
- 22
- Rating
- 0
P
Printablescb-builders
Hero Me Gen7 (HMG7) E3D-Online Titan Side Mount
A quick remix of the current (11/30/22) Hero Me Gen7 Titan Extruder DD mount. Current mount has the stepper mounted on the rear, which is fine if you don't have any of the handful of ender clones and a thin/compact stepper. For us casuals…
- Downloads
- 93
- Likes
- 10
- Rating
- 5
P
Printablesk scale models
1/144 Leo HMG
This is a 1/144 heavy machine gun meant for high grade kits. The suit this was designed for was the 1/144 Leo, however it will work with most HG kits. This has all parts, pre supported files, instructions and fully assembled files in case…
- Downloads
- 89
- Likes
- 21
- Rating
- 0
P
PrintablesLappaz
HMG7 E3D V6-Revo Six-BMO Collar Mount V2 (Offset -0.15)
E3D V6 collar mount wasn't fitting even after messing with flow on cura. Made the hole bigger 0.15mm bigger, so it fits snugly on my E3D. Included .f3d file so you can adjust it yourself. I suggest to print the original, and then adjust…
- Downloads
- 82
- Likes
- 6
- Rating
- 5
P
PrintablesDurtymaxNova
BIQU Microprobe V2 HMG7 mount
Made a quick mount for BIQU microprobe v2. Was hard for me to find a good solid mount so I just made up my own real quick let me know what you think or if you have any ideas. This one is setup for m2 heatset inserts but I can upload…
- Downloads
- 80
- Likes
- 4
- Rating
- 5
P
PrintablesNemesis
*Updated* HMG7 Creality Single Gear Rear Mount (Remix V2)
the first time i printed this i had a hell of a time trying to put it together as i had to have the tension adjustment bolt in place and one of the motor screws as the tension adjustment bolt blocks it being put in or removed and when i…
- Downloads
- 66
- Likes
- 12
- Rating
- 0
P
PrintablesArchimedes
HMG7.4 CPAP remix with more robust connection
Connection on the previous remix was a bit flimsy and prone to cracking. I made it thicker and better connected.
- Downloads
- 51
- Likes
- 9
- Rating
- 5
P
Printables828RM
Biqu Microprobe Mount for HMG7
Basic mount for a Biqu Microprobe which stacks into the mount holes for the 10mm cable management tower.
- Downloads
- 50
- Likes
- 9
- Rating
- 0
P
PrintablesDan Greco
HMG7 Gantry Adapter for Creality Linear Rail Upgrade
This is compatible with the “ Official Creality Ender 3 X-axis MGN12C Linear Rail Guide Kit ” that can be found on online retailers.
- Downloads
- 35
- Likes
- 5
- Rating
- 5
P
PrintablesHitLuca
HMG7 BMG BMG-M Rear Mount with drag chain connector
Drag chain end-piece to be screwed to the BMG-M Rear Mount, allowing the use of a drag chain on your printer. I didn't create other variations since to me it is the one that makes the most sense to be used. No heatsets required, just two…
- Downloads
- 33
- Likes
- 13
- Rating
- 0
P
PrintablesChris
HMG7 Neptune 3 Remix with LGX Lite Direct Drive and adjusted 5015 long ducts.
All these files were remixed to still use the original leveling method of the Neptune 3, (strain gauge). LGX Lite Direct Drive didn't reach, so extended it out to match hole right over nozzle. With the original files of the Neptune 3 long…
- Downloads
- 33
- Likes
- 9
- Rating
- 5
P
Printableslswanson06
HMG7.3 Ender 3 Linear Rail Bottom Belt Bracket
As Creality changed the Ender 3 X-Carriage mid-production (again), the belt spacing has changed and the belt is too short to be used with pre-existing Hero Me Gen 7 universal linear rail belt mounts. As this problem is yet to be fixed in…
- Downloads
- 33
- Likes
- 9
- Rating
- 0
P
PrintablesERKARK
Hero Me 7 HMG7.4 Single 5015 6Deg-ADXL Dual Duct Fix
the mounting points on the back's cross section are too thin and when combine with the printing direction(layer lines), it's too thin for printing wih ASA easily broken off. I just make it thicker.
- Downloads
- 28
- Likes
- 2
- Rating
- 0
P
PrintablesRubberEyes
HMG7 Alternative Hotend Groove Mount
Due to my bad habit of damaging my nozzle and hotend, I often had to dissassemble the HMG7 toolhead and getting the original groove mount out of the heatsink proved nearly impossible without causing damage to something. So I designed…
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
PrintablesDangerDork
HMG7 - ABL Fan Duct Replacement Mount (Left)
A kitbashed ABL mount that uses the left fan mount location
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesMaKmanIFest
HMG6-single-5015 with Incorporated LED Light Bar
This is a remix of the 'HMG6-single-5015.stl" I've added an angled flat plate to allow the addition of some LED's to light up the nozzle. It's designed to use the common ws2812 LED strip that can be cut to length. I used 2 LED's off a…
- Downloads
- 24
- Likes
- 2
- Rating
- 0
P
PrintablesBischi
HMG7 Anycubic Mega Zero Gantry Adapter
Remixed the old HMG5/6 Gantry adapter to fit Gen7. This works on my Anycubic Mega Zero 2.0. Printed in PETG with 80% Infill, seems to hold up. Maybe ABS would be even better.
- Downloads
- 24
- Likes
- 4
- Rating
- 0
P
PrintablesAnnoying Vanilla
HMG7.4 CPAP remix with more robust connection 15mm
Print profile used: 0.4mm nozzle 0.4mm line width 0.25mm layer height 15% Cubic infill ASA or PCTG recommended to prevent degradation due to close proximity to heated bed. If your printer have proper part cooling than support is not…
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
PrintablesDavid Williams
HMG7 Phaetus Dragonfly BMS - Bowden Adapter
TLDR - HeroMe Gen 7 and Phaetus Dragonfly BMS are great until you need to get to the bowden tube and fight with that little clip. This bypasses that, constantly holds it in the release position, and secures the tube with a PC4M10 coupler.…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesCristian Brotto
BHMG keychain portachiavi
Used M600 gcode on layer 14. First layer 0.3 height, others 0.1. Print at 50mm/s
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesZilgerios
Neptune2 HMG6 V6 + V6 volcano mount
Modified from HMG6 to get a V6 hotend fit on my N2, since i was lacking heat inserts at the time it's modified to use M3 nuts. Printed with PETG, 4 perimeters and 15% infill, i used more perimeters to prevent any potential warping from…
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesJesus Blanco
HMG7 Anycubic Kobra Go Gantry Endstop Stock Fitment
Added too the 3mf file in case somebody wants to optimize it.
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesFreman
CR-10S V2 Pro Microswiss HMG6 XChange Mods
What Remixed parts for my CR-10S Pro V2 based on the following: Hero Me Gen 6 Base ABL plate I haven't opted to use the remix button as I can only credit one design. Why By the time you put the full Hero Me adapter/base plate and squeeze…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesChristian Böttger
strengthened version of HMG7 E3D V6-Revo Six-Dragonfly BMO Collar Skirt V2
see as well: https://www.thingiverse.com/thing:7099082 Print Settings Rafts: No Supports: No Resolution: 0.14 - 0.28 Infill: 45% Filament material: ABS (ASA should work as well, PLA might get too warm, it's quite near the heatblock…)…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesNIMIDO
HMG7 Anycubic Mega X gantry adapter
I cloudnt find any adapter for my mega x so i made one. It may be in wrong orientation but other than that ready to go. I used mostly m3x6 screws but m3x10 would be ok too. Will work with stock plate and adapter plate, it was neccesary…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesBischi
HMG7 ADXL345 Mount for Cablescrews
ADXL345 Mount for Hero Me Gen7 on the Cable-Screwholes. This fits an ADXL345 with 14.5mm spaced holes. I used this one: https://s.click.aliexpress.com/e/_DmJIhej You also need some m3x5mm heat inserts to mount the ADXL to the 3d printed…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesAyush Supe
stronger HMG7.3 Creality OEM-CR10S-Ender3-5 2-Screw Mount V2
I printed this with my old broken hotend mount which I put a screw through by drilling into it.
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
Printablessl0m0
HMG7 E3D Titan Rear Mount V.2
The filament hole and back-plate do not line up to the hot-end and Ender 3 back-plate when bolted to the universal base.
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesWarglock
HMG5 Creality OEM Silver Aluminum Extruder Adapter w/ cable tiedowns
The HeroMe Gen 5 OEM Extruder adapter for stock Creality Ender 3/Pro's only accommodates the plastic stock extruder and the red aluminum extruder. They both have a triangular socket for the bowden tube coupler but the newest Creality…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesPseudoNinja
HMG7 Creality Spite Extruder SE Rear Mount
Print Recommendations: Use PETG Filament This is a structural part so it needs to be stiff, use 40% or more infill
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesJulianFM
Anet AM8 BLV Gantry Adapter Hero Me Gen 7 Release 4 (HMG7.4)
Parts Print List: 1 × HMG7.4 Anet AM8 BLV MGN X Carriage Adapter.stl 2 × HMG7.4 Anet AM8 BLV MGN X Carriage Plates.stl 1 × HMG7.4 Anet AM8 BLV MGN X Carriage Brace.stl For recommended printing orientation see photos. Everything was…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printables
strengthened version of HMG7 E3D V6-Revo Six-Dragonfly BMO Collar Skirt V2
see as well: https://www.thingiverse.com/thing:7099082 Print Settings Rafts: No Supports: No Resolution: 0.14 - 0.28 Infill: 45% Filament material: ABS (ASA should work as well, PLA might get too warm, it's quite near the heatblock…)…
P
Printables
Bolt Action WW2 US HMG
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
P
Printables
Bolt Action WW2 US HMG Ammo Support
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.