Counting matching models…
Got some flashes for studio photography, wanted to attach them to tripods I already had on hand that have ARCA quick-clamp heads. Here's a 3D printable adapter. I think it's important to print this as shown so that the cold shoe retaining…
is for mMy designakers to share their love of making by wearing this shoe charm. The simple message "I AM A MAKER!" is available to print, wear, and express yourself with. Feel free to modify and remix to make it your own. Print Settings…
is for mMy designakers to share their love of making by wearing this shoe charm. The simple message "I AM A MAKER!" is available to print, wear, and express yourself with. Feel free to modify and remix to make it your own. Print Settings…
description I was tired that my shoes fell sideways when i took the pair next to them. This model will keep each pair in their place. No screw, no glue; no damage to the furniture. how to print As supplied; pins are indeed printed…
You can use the models as a spare part for the pivot point of the IKEA HEMNES shoe cabinet. They tend to break after some years of use. The three countersunk bore holes can be used for reinforcement issues (optional, use M2,5x10).…
I attached a color guide if needed. Print with supports. Powered by PrintMon from MakerWorld (https://makerworld.com/makerlab/printMonMaker)
The lock has two holes through which the shoelaces are threaded. This type of lace lock is commonly used in athletic shoes, casual shoes, and outdoor gear to ensure a secure fit while being easy to adjust. Dimension: 18.4mm (width) x…
Lazy shoe lace lock for D4mm laces. Remix of dode513's design with a magnetic lace loop clip. I used D5x3mm magnets for the clip. The magnets are fully enclosed, add a break at layer z=3.6mm to add the magnets. For assembly instructions…
Adds a cold shoe to CR Ferret so that a light can be added for better scans
Transform your space with this versatile hexagonal organizer! Designed for dual functionality, it can be assembled as a stylish shoe rack or an efficient spool holder. Each net is reinforced using broomsticks (2.4 mm diameter), and by…
Holder for ikea OMTÄNKSAM shoehorn with space for magnets . Can be used without magnets.
4 Beinverlängerungen / Erhöhungen für die IKEA Lote Kommode. Erhöhung um 10cm damit ein Saugroboter darunter fahren kann. Haftungsausschluss und Hinweis: Die angegebenen Namen sind ggf. rechtlich geschützt und werden hier nur zur…
A Grip Extension for a Samsung NX 200 for the Accessory Shoe. I printed it in petg. The model can be found on…
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
Roblox Blox Fruit - Phoenix Fruit - or Pheonix if spelt wrong ;) Pretty tricky model to create and I thought the skinny tail would cause printing issues, but it printed first time and my blox fruits mad son thinks it's good. Supports -…
I always wonder why they make narrow shoes. Are there people who don't have big toes on their feet? I've bought a shoe-stretcher to widen space for the big toes, but it also has non-anatomic shape (the left and the right foot is the…
It's a 3d model of the creator of good mass produced hobbyist 3d printer company. I created this using tinkercad (because onshape can't edit stls very well and web sketchup is very laggy on stls). Might need some manual support. I hope…
It's an Adaptor for this A-Pillar-Mount: https://www.twizy-forum.de/3d-druck/82990-3d-druck-universal-halter-fuer-die-a-saeule?start=150#168884 I use it, to mount the display of the dashcam in my Twizy. TinkerCAD-Link:…
Soft grip for 50 mm thick body hand coffee grinder (no particular brand), printed from flexible material, such as TPU. It does: improves grip when grinding, allows to knock out stuck coffee grounds from the container by bumping it into…
This shoerack was designed for a narrow space I have at home, where I needed to store some footware. There are two ways this can work. Pictured is V1, where the printed shelves are screwed into a wooden board with 4 wood screws (3,5x16),…
Basic Key-Chain That You Can Hang On Your Walls, In The Halls, Or On Your Bal- (Based Off Of The PhoenixDoesStuff YT Channel.)
Dimensions 212mm x Pipe length x 300mm BOM 3d printed 2 x leg1L 2 x leg2L 2 x leg1R 2 x leg2R 2 x pin Not 3d printed 5 x 20mm aluminum pipe
Key Benefits: Attach LEGO figures to quickly grab kids' attention during photo shoots. Easily differentiate your equipment during group projects or events. Printing Details: Recommended Layer Height: 0.10 mm Printing Time: Approximately 8…
Super simple to print, 100% print in place no brim or support required. Super cute & extremely flexible, with 100% articulated wings and dual tail - the wings also rotate 360 degrees. Extremely easy to customise your colors, designed to…
Print out a few of these for a cleaner look and less hassle with untied laces. You can adjust the size in Fusion, but be sure to change the writing on the back as well, since this is not automated.
Adapter to attach a shoe mount accessory to the Speed Graphic's viewfinder mount. Mount a flash, trigger, light meter or any other cold shoe accessory to the Graflex body. Flash sync with the focal plane shutter will require an expensive…
--- Bambu Studio / Orca Slicer settings: Global, Taka_1, Taka_3: - layer height: 0.2mm - line width sparse infill: 0.6mm - line width walls: 0.5mm - wall loops: 0 - top shell layers: 0 - bottom shell layers: 0 - infill density: 62% -…
I printed mine using PLA with a .4mm nozzle at a layer height of .2mm. Also a good test of your retraction settings since the pegs essentially print like retraction towers, so make sure you have those dialed in for clean prints! I am not…
It's an adapter that converts the popular ball socket/mount that is used on goosenecks to a cold shoe mount (¼" 20 screw). I use it to mount Aqara A1 Camera to a Ugreen Gooseneck. Given the screw is plastic, it's not heavy duty. However,…
Build Instructions: https://www.instructables.com/Horseshoe-Puzzle-3D-Print/ Video: https://youtu.be/8rQlgXvvi2A The horseshoe puzzle is a classic disentanglement puzzle made from two horseshoes joined together by short ropes or chains,…
I love my Owalla 40oz water bottle but the cupholders in my Chevy Tahoe definitely won't fit it, so I made an adapter that will fit into the existing cup holder. Should work with a 2024 and 2025 Chevy Tahoe (Mine is a 2024). I included…
These are servo mounts designed to fit the Vanquish Phoenix crawler when using an AGFRC B26CLM servo. Printing: - Back mount requires supports (included in .3mf; please see the screenshot for reference). - Use 4+ walls and 100% infill for…
Sony in all it's infinite wisdom made it so you can't clip a Rode (or other) recording device to the hot shoe unless you remove the eyepiece cover. Really a genius move. This means that not only can you now lose your hot shoe cover… you…
Witness rebirth in 3D form with the Crystal Phoenix Rising Statue. This printable design features a majestic phoenix bursting upward from a base of jagged crystals, wings spread wide, feathers detailed for clean filament layering. The…
I made these to fit into the Mechanical M3 Bolt/Screw sorting device (but my remixed tray is required for it to work without cutting).
Replacement Horseshoe Clip for Clothes Hangers A simple replacement clip for standard plastic clothes hangers. This horseshoe-style clip slides onto the hanger's bottom bar and securely holds straps, skirts, or pants. Features: Tapered…
I got tired of cleaning my desk, I also don't own a workshop vacuum so I've created this simple mod for the Dremel workstation. It clips tightly on the nut in the botttom, and can be additionnally secured with a zip tie on the top part.…
I printed with one edge on the plate and a brim around it. layers parallel to that edge and not straight down the shoehorn. I thought it might be a problem and was considering printing on a raft, but I no longer think that is necessary.
This horseshoe shaped tag snaps over the stem of a wine glass. It is sized for a stem with a diameter of 11mm, but can be scaled as required. It is tiny, so good for those end of spool prints too.
better to print in 0.25 noozle, PLA….MUST BE RED!
Introduction These shoes are tested on one of these 32-cm dolls from the Las Amigas series. The doll originally came barefoot, so this work is completely freehand, no originals to go by. Added benefit: the shoes help the doll stand…
Simple connector to stack IKEA TJUSIG shoe racks (301.526.38) on top of each other. The part fits into the frame and keeps the racks aligned when stacked vertically. Designed for basic space-saving setups. No screws or permanent…
This is a simple clip-on holder designed for the IKEA TJUSIG shoe rack (301.526.38) . It is pushed onto the top frame of the rack and stays in place by friction, without screws or modifications. The integrated clip is shaped to hold a…
Mount your Kodak Charmera on a hotshoe. Access the USB-C port on both versions while the Case only version also has SD slot access. Supports optional, but recommended for the best finish around the button access.
Update 30/03/2026: M8 board middle part for second level (notch for locking on the the previous level) misc fixes Wanted to utilize multi-material printing so made a dual color version of the rack side panel. For this I decided that best…
I like the internal spool holder idea, but the designs were a bit strange. You need a way to release the spool when swapping, so I came up with the Idea of using magnets as a sping. That was a waste of time. The second prototype used some…
The horseshoe has always been a symbol of happiness! That is exactly what we are giving you at the beginning of this year! This is a color model for AMS, using 4 colors! This model is a universal gift. Printing is easy. Any type of…
EN Want to leave your mark in the snow? This shoe insert stamp lets you imprint your message, logo, or design while walking in winter. Features: Base plate size: 70 x 70 mm , thickness 1 mm , with 4 mm corner radii . Designed to be…
This is a remix with the Letter Z that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter Y that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter X that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter W that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter Z that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter U that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter T that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter S that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter R that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter Q that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter P that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter O that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter N that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter M that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter L that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter K that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter J that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter I that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter H that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter G that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter F that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter E that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter D that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter C that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter B that fits on Canon Cameras. If you Print it please post a make. Thank You!
This is a remix with the Letter A that fits on Canon Cameras. If you Print it please post a make. Thank You!
compact barely noticeable shoe holder that slides in between your shoes. ideally for size 10 mens or larger but can fit an 8 (barely).
Hot shoe mount. Attaches with cable ties. Can be used on any handlebar. Bicycle, scooter, or motorcycle. Bending safety clip. Use cable ties with a maximum width of 4 mm and a thickness of 1.5 mm. Two pieces. For better stability, apply…
This custom-designed bracket mounts directly to the upper trim panel above the rear window, providing a clean and secure mounting solution for most traffic advisor light bars. It offers a low-profile, factory-style appearance while…
I was really disappointed by the Sena SRL2 Speakers that fits in my Shoei GT-AIR 2 helmet. The only way to hear anything through them was with Audio Boost on which in turn made the audio distort. so I took some 50mm speakers of my old…
Inserts for Ashes: Rise of the Phoenixborn (2015 - first edition) These can help organize sleeved cards for all extensions published in french (The Frostdale Giants, The Children of Blackcloud, The Song of Soaksend, The Roaring Rose, The…
The soles on some old shoes had worn down to the point of literally falling off, but we wanted to get more mileage out of them (and 3D-printed replacements sounded like a fun project). I took a picture of the bottom of the shoe, imported…
TN Shoes Nike Pop Art This pop art piece captures the raw energy of street culture and transforms it into a contemporary wall sculpture. The sneaker silhouette, an iconic symbol of urban style, is reinterpreted through layered colors with…
I don't bring along a rug or carpet when going to my local range, and I needed something to replace the spikes to use the rest on a concrete shooting table. The "feet" replace the spikes entirely. The "shoes" screw onto the end of the…
Crude and efficient anti-skid shoe pads. Working example printed from 40D TPU, 4 walls, 1.2mm top and bottom shell, 20% infill, at 0.6mm nozzle. Printed part should be fitted with 25mm or 20mm wood screws and zip ties/anything else that…
This shoebill bird figure features an oversized beak and chunky proportions, giving it a charming cartoon look. Designed to look like a real FDM 3D print with visible layer lines and a matte filament finish. Powered by…
A chibi phoenix with simplified flames and rounded wings, printed in a single filament color. Visible print layers across the surface show FDM construction. The figure rests on a tabletop with workshop clutter in the background, warm…
copy of the "Fermator" elevator shoe dimensions: 29.3 x 8.4 x 16.1 mm I recommend printing with stronger plastics than PETG
IKEA Skådis Adapter for Magnetic Shoehorn I designed this to mount a wooden magnetic shoehorn holder onto a Skådis board. It’s much sturdier than the adhesive strips these holders usually come with, and it keeps everything looking clean.…
These are shoes for a flat footed barbie. Kind of a clog style shoe. Does not fit the standard high heeled version. Print in flexible material such as 95a TPU. Also check out my Boots for flat footed Barbie
Replaces broken or damaged ikea Ställ retaining shoe cabinet bracket pin peg. Printed at 45 angle with 5 layer walls
