802 models
**Update 12/29 - Didn't realize the disc was missing. It was originally in the 3mf file, but the bambu ones don't open in Prusa Slicer so in the confusion of removing the non-compatible 3mf file the disc was left out. It's been added back…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Uhltimate's Disc Shooter is an exceedingly cool bit of engineering. It uses a springy fork to launch a disk forward. The disc starts out in the center of the curved fork prongs, and when you pull the trigger, the fork is pulled back…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Semi automatic disc shooter - fully 3D printed - no extra parts or glue required. Done as an engineering challenge and to show what can be done with 100% printed things, its also a lot of fun. Last part of a series of shooting things.…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023
Print approx. €13.31–€16.27 excl. taxPreliminary estimate for one variant
this baby yoda vomit toothpaste cap is a remix frrom https://cults3d.com/es/modelo-3d/artilugios/baby-yoda-pasta-dientes-thootpaste#_=_ but painted and laminated in prusaslicer and MMU2 Ready. The Gcode and the 3mf are uploaded.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
ceci est un lanceur de disque
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Use tree supports on build plate only for base + balls. A tabletop shooting game where the goal is to knock down as many ducks as possible using a spring-powered launcher. The player fires small balls across the playfield towards a…
Print approx. €13.48–€16.48 excl. taxPreliminary estimate for one variant
This is my custom webshooter design that is designed to be fired with a spring from a pen ,print at 137.23mm
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I had a flash of inspiration last night! As I'm still learning to design and work my printer, I thought it'd be kinda funny to make tokens based on failed calibration tests, prints, and hardware. Since Monopoly has 8 tokens I decided to…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
This was put together for someone I know who is a fan of The Owl House animated show. It is basically “full size” but could likely be scaled down. Edited 9-20-2021 to add an “all parts” STL file for use with MMU printing. Assembly : I…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
The famous disc shooter has three issues that this remix improves upon: The last disc in the magazine has poor shooting performance because it is deflected by the lever. This is resolved by adding a disc-shaped lid to the end of the…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Shoot Discs up to 20ft (all 3D printed) See in action: Shooting Cards: https://youtu.be/O8kFknbVQlQ Slow Motion: https://youtu.be/aOcUoisxkeE Full YouTube Video: https://youtu.be/7CvUl2iC0c4 Note: This is a toy, but please use responsibly…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Hello guys, small soldier sculpture. Enjoy the print!
Print approx. €6.60–€8.07 excl. taxPreliminary estimate for one variant
Updated to improve Hammer Spring DS_Plate3_SupportEverywhereBrim_40.stl updated and Hammer Spring stl file included separately. Full Model is grouped in 4 prints DS_Plate1, DS_Plate2, DS_Plate3 and DS_Plate4, the other included stl files…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
This is a shooting target device with three targets intended for use with the print-and-play “Elastic Eagle MKI”. This target stand features a reset lever, so you can easily reset your targets with a gentle push! And just like the…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
I created that shooting patch dispenser to replace the standard paper patch dispenser while they get wet and don't work very well after a while. In case the lid is not holding as expected, a small tesafilm strap can be used to secure body…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
This print is for a replacement disc for the disc shooters on some Fisher Price Imaginext toys. Compatible with the batbot. The discs are easily lost leading to upset children and frustrated parents. Its a fairly quick and easy print in…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Dart shells, compatible with all Buzz Bee toy blasters. These allow for compatibility with solid-core darts. They have better performance characteristics, and you should see an obvious performance increase over the stock shells. You can…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Hello This is my second iteration of Multifunctional hand watch bracelet. After many hours of testing and tinkering I made it smaller but more capacious. This time the containers are attachable as well as other attachments like…
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for PETGSource material: PET
Hello, toy soldier shooting sculpture. Thanks for your download, enjoy the print!
Print approx. €3.67–€4.49 excl. taxPreliminary estimate for one variant
Model of Porta-Hooty from The Owl House. Hooty has an articulated neck. The length of Hooty depends on the number of segments you print. There is also a version with a fixed Hooty. Dimensions Length Width Height House 46mm 74mm 85mm Hooty…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Please click ❤LIKE❤ if you appreciate my work 😊 A compact and functional miniature shooting target model for hobby use, training setups, or diorama decoration. Whether you're into tabletop gaming, airsoft practice, or just want a cool…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Hello, Today I have a Happy New Year 2026 for you, a magical Hulk for a photo shoot. Suitable for a photo corner. Great for photo shoots and various pranks :-))) Good for celebrating the New Year 2026!!! Good luck with the printing! I…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
With this piece you can use any headset with a button and use it as a photo trigger for timelapse. Adapted for Ender3 V2
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Spring Gun V2 - Shoots fake bullets with magazine Spring gun v2 can fire multiple bullets one at a time thanks to the new magazine system. Reading the comments and advice from users, I designed version 2 of the spring gun. The new version…
Print in PLA No supports needed Just glue Face and Tray together Hold at the printer by 10x2 magnets Detect thin walls should be enabled if printed with a linewidth greater than 0.4mm
Spring Gun - Shoots fake bullets and poop Single-piece printed spring gun that shoots fake bullets and poop, fast, easy to print and a lot of fun to use. I had to make several attempts to find the right ratio of spring length to spring…
For Sale here: https://atlaslabs3d.com/ "Elite" version of this model with many fixes, upgrades and features is available here: https://cults3d.com/en/3d-model/game/ttg2-a-better-box-connection Loading mechanism was redesigned for more…
Iron Man preparing to shoot. I didn't make this 3D model but i can't remember who did it or the web site i got it from. I did repair the mesh with Netfabb to be able to print it without problems. Print instructions Category: People Print…
print in 0.1 to 0.3 layer height, prob best with petg or pctg but used bambulab pla+ basic print in place recommended: print with brim and supports works the best
My 8-shot re-mix of Uhltimate's Disc Shooter, was fun, but why shoot 8 discs when you can shoot 40. Really fast. This double-barrel version of the shooter is crank driven, able to fire up to 8 discs per second. It uses the same basic…
Updates 2026/06/16 : @RandSchlemiel created a Hooter Holder Hub for mounting the owls. 2026/06/02 I've created a remix for mounting the wind chime using an empty Prusament spool @ElFlecko created 30° a perch-mount for the hooting owl…
i made this to see if i can make a fully 3d printed gun, this is a small part of it and more of this will be coming soon, from what ive tested so far it can hold 3 bullets but im gonna continue working on this for later, you should weld…
Updated with a bit more power. Mini Shooter for Nerf Dart or printed bullet shooter (Nerf Darts work the best). Single piece, print in place. Possibly the worlds smallest fully printed Nerf Gun :-) Check out the video for more info.…
This is a basic height-adjustable shooting rest using a screw-and-locknut adjustment. It is designed such that no brims, supports, or rafts are needed to print. There are four components, but you will print a total of five parts. The…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I designed these hands for my DUMMY 13 Spider-Man costume: https://www.printables.com/model/653710
Mini Nerf Dart shooter. Fully 3D printed, just one part. No Supports, no brims, works right off the build plate. With optional guard. See YouTube: https://www.youtube.com/watch?v=vTA9rtCSa3o 0.2mm, 3 walls, 30%infill. Use PLA or PLA+
This scope attachment allows you to shoot and record scope view simultaneously. It uses a semi-transparent mirror to send part of the light to the camera and the rest to the shooter's eye. The attachment is a modular design consisting of…
This is my third 3d model (second made in Blender), and its kind of rough, but I'm hoping to improve with my skill. This is a simple original design of the classic Spider-Man Web-Shooter. Also these are scaled to fit my own wrists which…
Overview This Crossbow is a remix of the awesome model of Arkoudaki Crossbow that can be found on Thangs A lot of modifications went into this for easier building and printing. Took me around 30h of work. Replaced plastic pins with seven…
— Handle With Care --- Introduction: Discover the thrill of launching matches with precision using my innovative 3D printed matchstick shooter. Crafted for safety and excitement, this print-in-place model guarantees endless fun for…
It's time for another Plants vs Zombies character! This time I'm doing the Peashooter! Check out the video here for a closer look: https://youtu.be/QpMqgUU2H5Y I created this model in Fusion 360 using forms to create most of the body…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Plants vs Zombies inspired, Peashooter, Tabletop DnD miniature 25 mm medium base which can be used for DnD and…
Rapid fire fun with this Gatling-style disc shooter. Shoot up to 5 discs per second, with a magazine capacity of 32 discs. Shoots up to 8 meters (or more?). Easy to print and assemble. Requires a rubber band to drive the firing pin. (Size…
i didn't like any of the other poop shoots for the ad5x, so i made this one after some trail and error. it's nice and wide and doesn't have any catches, also leaves room for the FF enclosure pieces, keeps the vents clear and uses one of…
No glue and no hardware needed. Features two types of “gun rest” parts: one with a TPU inlay and one without. Includes two types of bolts for the main part: flat-ended or spiked. Thread tolerances have been increased for better…
Modelo de Desdentao de como entrenar a tu dragon, Completamente imprimible Recomendado nozzle 0,4 o 0,2 soportes si :)
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
A lot of the purge buckets I found where too large or none magnetic so I created my own and added the bambulab logo. One is 90x90x50mm, one is 100x90x50mm and one is 150x100x70mm. I made it to take 10mm magnets that are at least 3mm thick.
Christmas Cookie Biscuit Gingerbread Cutter (approx 55 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
These are the STL files for my web shooters that I shared on TikTok on my page Karan Productions, after many requests. Thank you to everyone who supports my account. I used servo mounting screws that come with sg90 servos, they sell bags…
Parametric target shooting cards template Create your own target shooting cards with this template if you run out of cards! The OpenSCAD file allows you to create one or five targets, all with a single parametric CAD file. Or, just print…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Plants vs Zombies inspired, Snow Pea Peashooter, Tabletop DnD miniature 25 mm medium base which can be used for DnD…
A 6-Shot Disc Shooter that launches discs over 8 meters! 6-Shot Magazine: Experience continuous fun with swift and hassle-free reloading. Has a thumb lever so that it is much easier for one hand to hold open the disc holder while the…
poop guide with clearance for 3 plate holder by @CarlosGuerre_3229860 3 plate holder can be found: https://www.printables.com/model/1480752-ad5x-3-plate-holder
To assemble this little web shooter you can use a 4mm diameter spring or even a pen spring, and for the tip of the projectile you can use 5mm diameter neodymium magnets. When assembling it, the cartridge will be attached to the body of…
Model Quick and easy Magazine Extension for the great Disc Shooter from uhltimate . With the extension the Shooter could shot 12 rounds in a row. The magazine Extension is a snap-fit part. Simply slide over the original shooter, it holds…
The screw is now reverse thread, so counter clockwise screws it in. you will need to glue the clip to the body, i use epoxy. I added an extended clip, this pushes the dispenser out away from you, - i found that my clothing was getting in…
V2 added which is 10mm winder, larger opening at top exposing the printers exit shoot allowing larger poop to slide through and 3 degree more slope giving it about 14mm downwards angle With version 2 being lower you’ll either have to…
This is designed for PRL type shooting or any type of target shooting where you need to make notes as you go. It's designed to hold a standard credit card sized plastic card which are about £10 for 100 on amazon 0.76mm thick (30mil)x- 86…
Flashforge AD5X poop shoot colletion box Adventurer 5X Print with 3 walls.
I have redesigned the model by adding 1 extra space for square magnets measuring 10x10x3mm and removing the bamboo logo with letters. The magnets fit perfectly, the only thing you would need to do is use hot glue to secure them. Layer…
Foldable Spring Gun Shoots fake bullets and is foldable for easy transportation. Instructions after printing: take the gun from the sides and break the mini supports inside the joint so it can be released.
Pea Shooter from Plants Vs Zombies Print instructions Head and Pot need supports, stem is small so I would suggest increasing the infill on it to 35% of greater as it hold a lot of weight. Also the stem is supposed to screw in but…
A simple shooting target patch dot sticker spool holder for 11mm and 16mm, 20mm or 40mm dot stickers. These will fit a spool of 1000 stickers. A stacked version has two mirrored sides that should be glued together to form a single item to…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Plants vs Zombies inspired, Peashooter Threepeater, Tabletop DnD miniature 25 mm medium base which can be used for…
Remix of the fantastic web shooter of Carlos 3D I had to build for my nephew: changed the base to: use MX springs instead of rubberband added channel to thread the nylon wire changed the cover to: print better the back part which was…
Fully adjustable shooting rest that fits most firearms and airsoft rifles. Adjustments allow you to correct for wobble on uneven surfaces as well as for perfect height with almost 12" of vertical adjustment potential. This design features…
Fun size (mini) disc golf for the whole family. This low space table top piece would need supports on the basket, some on the top hooks and on the chains if you prefer. needed for one complete set top x1 base x1 basket x1 pipe 1 x2 pipe 2…
the model by Enrico Pulvirenti but without the Bambo logo
Model of JSB 10m target shooting pellet. One with JSB logo, one without logo. Model without logo - print upside down.
Updates 2026-09-10 Check out this awesome remix by @onus which adds a mold at the bottom to add some weight to the owl. The remix also contains printable eyes! Place this decorative owl in your garden and listen to it hooting when the…
This is a remix of Alex Crazy's Fidget Rifle Keychain , turning it into a peashooter for 6mm plastic BB pellets. He did say it was for fun, so I edited it in Tinkercad to increase the fun. Only the Barrel and Bullet parts are required to…
Well I bought the wrong cards, and loads of them. Turned out I needed 170mm for my steel target. So I made my own 140mm box. Indestructible by 6mm plastic BB's. I've been using it with 4,5mm steel BB's (at 3 joules) and it shows, although…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Plants vs Zombies inspired, Peashooter Repeater, Tabletop DnD miniature 25 mm medium base which can be used for DnD…
If you like what I do and want to support my work check out my Patreon!
it shoots rubberbands i use short ones. it slides into my watch strap i used supports and %20 infill
*** ~90dB Loud, measured with a phone app, use at your own discretion The perfect party toy to make some noise and welcome the new year 2024 with a bang! 🎉🔊🎆 -60% Scaled version is less loud and prints faster.
The Photopistol is my attempt at recreating the old Photosniper lens kit from the Soviet Union. It turns any lightweight camera that supports a wired shutter release into a literal point-and-shoot-camera. Build guide and required…
Have some fun shooting your own targets They are 139x139mm just to be sure they fit As we say in Sweden (Sorry, dosen't translate well to english): Skjut inte upp till morgondagen det du kan skjuta ner idag!
If you like what I do and want to support my work check out my Patreon!
Small bottle opener and cap shooter. Pull back the slider, open the beer and press the trigger to shoot :) See it in action: https://streamable.com/c4uv7q Update 1.1: Increased the overall height a little so that the M2x20mm don't need to…
For my retro gaming PC based on Batocera , I use the RS3 Reaper Retro Shooter Lightguns . These require 4 IR sensors (actually IR emitters) placed at the corners of the TV screen. To avoid having these sensors permanently visible, I…
This is my design of a shooting patch dispenser, BOM: Printed Parts Plastic sheet(optional for windows) 3x M3 Flat Head Screw (25-27mm or ~1 Inch) - For the Single Dispenser Version OR 3x M3 Flat Head Screw (~50mm) - For the Double…
This has 2 pieces. Inside which is the shoot, requires 4 heat sync inserts. The outside piece which is the back mount. It holds the shoot firmly to the back wall and has 4 optional heat inserts for connecting a slide. I have created a…
Just a little beefed up spring for the disc shooter. I only made the part where the arms are attached to the base slightly wider. Gives some extra meters. Long time testing still under progress ;-) Safety disclaimer: Don't aim at people…
BUILD GUIDE: DEMO: Non-3D Printed Parts 4 - 19mm 1/8in rods for hammer/rocker/magazine/trigger 1 - M3 nut for grip 1 - M3X16 cap screw for grip 3 - M3X12mm cap screws for frame 3 - M3X4~6mm cap screws for handle 3 - Size 16 rubber band to…
Silly Shell Launcher Attachment fits the Silly SCAR thread and you can also shoot darts through it! Airtight launcher for Silly Shells for 16mm aluminium barrels. Fits all Silly Scar threaded nuts and uses also an o-ring seal to the…
This is a Very simple Web shooter/Wrist shooter. Assembly guide Other things needed: .8mmx0.8mmx45mm spring for bullet .8mmx2.7mm magnet for bullet .Two 5mmx3mm magnets for cartridge and base .small elastic band to keep the release lever…
Fun game to play with friends! Simply pull down the compression spring and release to shoot the ping pong ball. The distance varies of course on how far down you pull the spring, but I would guess it can reach up to something like 15…
I printed on .2mm with 5% gyroid infill with 10 total layers. You could possibly do 7-8 but I recommend 10 for stability.
Designed for 3" Clay Shooting Targets. Fits snug so it won't blow off in the wind. I've also included a laser cut file as well. Printed in PETG, 100% infill, took around 20 mins. Laser cut was 1/4in wood and about 30 seconds. haha. I…
UPDATE Sept 2023: Improved the size of the SX-70 version (others to follow soon) to allow for the newer Polaroid batteries. These are now .3mf models exported from fusion360, and may not be in the proper orientation. ---------- This is…
This compliant launcher was inspired by the Toothpick Gun and it uses a similar mechanism, however I have made a more ergonomic handle and a much better shot, due to its smaller bullet size and stronger springs it can shoot a bullet over…
The Parts that i used to make this are from Thiniverse and will be in the "Remix" Collection. The Remix is not the correct one it is one of my one remixes.
![Dope Data card holder for [ air ] rifle precision rifle shooting scope or RIS Picatinny mount](https://media.printables.com/media/prints/393250/images/3284899_a0527a9d-c0ac-4387-8d0b-873f44b445ea/img_4010.jpg)
