38 models
Two versions of the cooling shroud for my MI100 GPU in my server. Supports recommended but not needed for the power connector tunnel. Recommended printing with 40mm holes facing the buildplate.
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for PETGSource material: PET
Here is a mobile phone holder for the Xiaomi Mi10T Lite 5G with the original protective Cover that came with it. The Photo shows an early attempt. Now it´s slightly improved. Now the lettering is only punched. Created with Tinkercad.
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for one variant
Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…
80mm fan adapter for most AMD MIXXX series GPUs. There is an optional fan bracket that can used if desired, or the fan can be mounted directly to the plenum. The bracket is designed to be used with m3 heat set inserts for mounting the…
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Messerteller ist 220mm groß mit Messerklingen 254mm Schnittbreite mehr geht nicht. Messerschutz wurde auch erneuert und für den größeren Messerteller vergrößert. Mähgeräusche etwas lauter. Mähtest laufen noch. Was benötigt wird…
A custom-designed adapter ring. This modification allows you to mount 6 blades instead of the standard 3. Materials Needed: 3 x M4 x 8mm screws 6 x M4 x 6mm x 6mm inserts Printing Specifications: Material: PETG Infill: 100% Layer Height:…
Moin, original sind nur 3 Klingen an der Messerscheibe, war mir zu wenig für ein gleichmäßiges Schnittbild. Da es fast nur platte Scheiben ohne Design und mit Einpressgewinde online gibt, habe ich mir ein eigenes Modell erstellt. Warum 7…
Printed in a single part on a big printer, or in two parts to fit the build area on a Prusa MK3. Attach the spikes with screws into the orignal wheels to improve the climbing performance on grass with the mower. You need to do some…
This is an accessory for the storage compartment of the center console of the Hyundai i10 (AC3 series). The default slot depth is 15mm. If your phone is significantly thinner or thicker, you can modify the depth of that slot in the “vars”…
I wrote a guide on how to make it more usable here: https://github.com/Szalacinski/amdv620-to-w6800-flashing-guide If you are in China, you can buy the complete kit from GS Origin here: https://item.taobao.com/item.htm?id=1052125661134…
I recently purchased an MI100 for my lab now that they are pretty easy to find on sites like ebay. There are a few different models on the internet for the MI25/50 but the shroud is a slightly different shape on the MI100 and tons of air…
The Segway Navimow has impressive navigation capabilities and even offers manual control via the mobile app over a Bluetooth connection. However, like most robotic mowers, it tends to leave a fairly wide strip of uncut grass along the…
I went back and redesigned my first design for the MI100 shroud to open up the internals in an effort to provide better airflow. The V2 model seems to have less blow back around the fans when compared to V1. When running at full clocks,…
This housing provides a bit more weatherprotection and ruggedness for the Fanvil intercom i10S/i10SV/i10SD SIP mini intercom. Due to the fact that there are two holes in the front for the camera and the push button it is not entirely…
The cap on the coolant reservoir tank of the secondary Hyundai i10 went AWOL. Luckily we had access to another one on the primary i10, so modelling a suitable replacement was straightforward. No attempt was made to replicate the external…
I was tired of fumbling around trying to find and connect my Oneplus 7T Pro to charge/AndroidAuto in my 2020 Hyundai i10, so I designed this holder/charger to fit in the cup holder of the car. Printed in 2 parts - main body is in PLA+…
I created a cover for Pentax D-Li109 batteries. There are grooves on the sides so that the cover fits better. Since the battery is symmetrical, it is possible to signal whether the battery is charged or discharged by simply turning it…
I wanted to add a seamless wireless charger for my Hyundai I10 - so I designed one to replace the center console tray. To install remove the center console by gently prying at the perimeter of the console to release the clips, and then do…
Reduction of the ventilation pipe in the kitchen. Printed with ASA Nozzle stroke 0.25mm 100% filling
This is a phone holder for Xiaomi Redmi Note 9S (and also Note 5) in a 2011 Hyundai i10. You can also use it as a drawer. You will also need 4x M3 bolts (optional: 4x M3 nuts, if you don't want to screw the bolts directly in the plastic).…
Modified lid to hold Kokkia Bluetooth adapter.
A Pentax D-Li106 battery for a Pentax X90 camera and others. ready to hack for a battery grip! Category: Camera
Simple adapter ring to be able to mount JBL 622 in the door of a Hyundai i10 2010 model. It may fit other models as well, but it's not tested. Prints without supports if oriented the right way. I used 4xM3 knurled nuts to mount the…
Needed EarRack to install my MEI1000g2 in a 9.5" rack. This version side the emitor. For a centered version see : https://www.printables.com/fr/model/538817
I wanted to take some shots from my phone using diffraction gratings to compare the light spectrums of different luminaires, after purchasing 3 gratings of 100, 300 and 600 lines, I needed something that would allow me to arrange the…
I have a smaller printer so I cut it into 4 pieces.
This is a fence mounting clip for the GPS RTK Antenna for the Navimow i-Series. You'll additionally need 2 M3 Screws, Nuts and (optionally) Washers, or 2 Zip-ties. The model should print fine without supports if you print it as-is with…
Needed EarRack to install my MEI1000g2 in a 9.5" rack. This version center the emitor. For a sided version see : https://www.printables.com/fr/model/538816
This is a wall frame for an old phone I do not use anymore, an Xiaomi Mi10T. The ‘cable addon’ part uses two 4mm CNC-Kitchen's threaded inserts to mount on the bottom part. Printed in ASA (the phone is quite worm while permanently…
a holder for the Ninja CI105 to save place inside the kitchen cabinet
Needed a gimbal saver for the i10, and didn't see one on Thingiverse yet. I printed it in TPU but presumably other materials would work Category: R/C Vehicles
Battery Compartment Cover for LD Systems MEI100G2BPR This is a 3D-printable replacement battery compartment cover for the LD Systems MEI100G2BPR UHF PLL Wireless Stereo Receiver . The model was created from scratch as a practical repair…
Remixed model for WI-FI camera XTEND HOME BI-100.
