Counting matching models…
For Sale here: https://atlaslabs3d.com/ "Elite" version of this model with many fixes, upgrades and features is available here: https://cults3d.com/en/3d-model/game/ttg2-a-better-box-connection Loading mechanism was redesigned for more…
Welcome to project TicTac a 120mm3 3D printer V2.0 with upgraded Z Drive assembly and RatRig ToolHead V1.0 Beta Hotend. The new Z drive design features relocated pulleys and a shorter Z_Cap for improved stability. Assembly is similar to…
This is a version of the well known “TicTacToe” game. This game is easily transportable and can be played in a car, train or plane while traveling. The lid has been designed in such way that it is easily taken off to use as a tray to hold…
+-+-+-+-+ Check out Version 2.0 !!! Modified, so the turn-pieces won't turn by themselves. https://www.printables.com/de/model/745979-v20-travel-xo-travel-tictactoe ---------------------------------------------------------------- Since my…
This is a remix from the work of Phiphila https://www.thingiverse.com/thing:5974177 This remixed version allows you to connect a 1/2 to 3/4 (16mm to 20mm) electrical duct ICTA. IMPORTANT WARNING REGARDING THE USE OF THIS ICTA CONDUIT…
This is a simple one-handed operation TicTac dispenser, for use when driving or wherever. The discharge chute can be flipped to make it left or right handed. Note: Now V2 . The dispenser is no bigger externally, but the slider cavity has…
Form plate is supposed to be glued to the base plate. Print 5x cross and 5x the circle.
No support required
In order to have the bolts sit flush with the surface of the tictac gun, I added a negative volume for each. To do this yourself, right-click the gun part, add negative volume, select Load, and pick the m3-hexnut.step file. Center it…
The "Classic Game, Print-and-Play" Tic-Tac-Toe Set 🎯 Sometimes you just want the simple game, ready to go, without digging through a drawer for a pen and paper. I wanted a durable set that packs up small and plays anywhere. So I designed…
V2.0 now the turn pieces will not turn by themself. I designed a little locking pin, which prints support-free. the blank side is wobbling a bit more (more clearance is needed so it won't stick together while printing). X and O sides are…
Tictac Box only to demonstrate the function in the pictures!!! A small formicarium for transport with a cap and Tictac Box water station. This small formicarium can be placed in an outworld or terrarium and serves as a nest and watering…
This is a set of molds to play Tic Tac Toe with sand. Includes 5 degrees of draft to make removal easier. The sand set is all you need for molds, but you can print the complete set in order to play without sand as well.
This is a vindicta skin made by Keller Max. I just decided to transfer it to Blender and make a printable model.
Magnetic TicTacToe board and game pieces. In the File section you will find models that support 5x3mm, 6x3mm, 8x3mm, and 10x3mm magnets. Additionally, for each of these sizes, there are 2 types of models: “glue-in magnets” and “embedded…
Footrest for Asetek Invicta pedals
Here a junction part to join 2x sheath of 20mm. I know, you can buy it for 0,20 eur in bags of 50, but if you only need 1 and on a Sunday, it's useful :-) You just need 2x zip ties and print 2x times the stl. I printed it in PETG for…
About Tock The Ultimate 3D-Printable Board Game for Family Fun Are you searching for a unique, engaging, and genuinely useful 3D printing project? This is a complete, 3D-printable Tock board game that provides hours of fun for the whole…
Modèle 1 : Adaptateur Gaine TPC 40mm vers ICTA 20mm Modèle 2 : Adaptateur Gaine TPC 40mm vers ICTA 25mm Modèle 3 : Adaptateur Gaine TPC 40mm vers ICTA 32mm PETG recommandé si usage extérieur Couches 0.3mm Remplissage 40%
Magazine for the TTG. No more searching for the korrekt TicTac box. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 15 Filament: Prusament PETG carmine red Category: Toy & Game…
This is basically derived from HHN's Pathfinder and Nexus Pro grips, but with obvious changes to fit the Dictator. Hardware: 1 M5x40mm round-headed bolt/screw with a head diameter no larger than 9mm 1 M5 nut with 8mm wrench flats The hole…
Adding modules as desired and size 10% Infill Supports only for TZE File Using M3 Nut and screw
This is a modification to the magazines for the Dart Zone Max Dictator to turn the single flip magazine into two 30 round magazines. It uses a singe 12 round Dictator specific magazine and a Out Of Darts Tachi Magazine Spring, which they…
This mis-shaped sphere sometimes has a mind of its own. This is partly due to its unique shape… it started as a sphere, but selected points were stretched slightly out of kilter to help create random motion. The effect is a bit like…
Floating TicTacToe The perfect game to play in your pool. This game is oversized and can float which makes it ideal for use in the pool. Update: New Mini Size And Jumbo On-The-Go Print Files For Smaller Printers Mini version has just been…
Improved Trigger for the Dart Zone Dictator much less slack on the trigger pull. prints without supports snap-together (PETG recommended to allow flex-snap)
Perfect ICTA electric conduit holder with 1 or 2 screws (M3), for 20mm diameter. For NO support : use 0,10mm layer
Asetek Rumble motors, please see photo as how they fit, 4 bolts and nuts needed to secure to pedal. Pedal plates must be mounted one hole higher!!! No supports needed, print on flat face
This is a variant of the well known “TicTacToe” game. You can also find it under the name Gobblet, but then you have a 4 X 4 field. The 3 X 3 field is called Gobblet junior In this game each player has 3x3 pieces. The bigger piece can be…
Fun 3D printable board game: Tic Tac Toe 3D. There's three sizes of pawns that can be placed over each other. This gives TicTacToe a fun extra set of dimensions. Rules that you could use: Person who lost the last game can start The pawns…
here is the parfeait connector to insert wago and make a connection between electrical wires in an elegant way. You can screw the printed part directly into the wall, or add a protective cover.
Gancio rapido - zaino Invicta vintage - Backpack hook invicta.
Iconic Movie Moments - Pink Floyd The Wall - Pink Dictator Speech - 1982
A staggered holder for the TicTac style boxes. It was designed to make it easy to see and grab a box while working. Fits 25 individual boxes. Print settings: 0.4mm nozzle 0.2mm layer height no supports. 5-15% infill PLA print face down…
It is possible to modify using the original Lerdge iX frame, but some additional parts will be required to complete the assembly. Major components may include the X-axis attachment plate and the heated bed base plate.
Hello guys!! Im happy to introduce you Tic Tac 2, the model can be printed in place, just set tha face that will lay down on the table when you are playing (sorry but axes were mixed when designing), hit print and enjoy it! YOU WILL NEED:…
Project: https://simracing-pc.de/en/2022/06/20/diy-project-alternative-pedal-plates-for-the-asetek-invicta-pedals/ Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer: Anycubic Vyper Rafts: No **Supports:** No Resolution: 0.16…
Asetek Invicta spacer with logo and M6 screw for block
A while ago I did a model based off of Moonberry's rendition of Strahd Von Zarovich. Today I've made another one based on Moonberry's rendition of Rictavio / Van Richten. Both with Moonberry's permission of course. I've included some…
This uses the existing top and bottom holes of the pedal plate, if you use these to mount to the arm this will not work for you. Print upside down so that your pedal plate is nice and smooth M5/20mm countersunk hex bolts used and M5…
Replacement door glide including the roller for a Victa Treco Garden Shed. After I created this I found a similar item on here ( https://www.thingiverse.com/thing:2248433 ) and also the fact that you can buy them new from the…
Manchon pour gaine électrique ICTA en 25 cm Il suffit d'ajouter 2 cerflex pour fermer les 2 parties du machon. Etanchéité pôssible avec du solicone.
Cache extérieur permettant de faire renter une gaine ICTA comprise entre 30mm et 15mm. Pour modifier le diamètre de la gaine allez dans le menu MODIFIER et le sous menu MODIFIER LES PARAMETRES . Dans paramètres Utilisateur modifier la…
Just a quick parametric model of Naughts and crosses for printing
TicTac is a very cool candy, but you literally can't bring it anywhere because of its noise.. This model fixes that! Print from TPU - 95A should be fine, one wall and not a lot of infill. Support material is needed.
After making the smooth and wider throttle pedal plate I was asked to design the brake one too. I have make the plate a little thicker to compensate the extra braking pressure This like the other plate I made would take the M5 countersunk…
This is a somewhat print-optimized rifle grenade-style Mega XL launcher. I've tested this in the Max Dictator, but it should work in all Dart Zone Pro/Max and Adventure Force Pro blasters. The area that fits into the hole in the front of…
Tool for unscrewing the back cover of a wristwatch case. For replacing the battery. The exact dimensions are shown in th
This print turns a TicTac container into an ant trap with a sheltered entrance to keep your bait powder dry. I had a problem with ants in my storage room, but I also have cats and kids. I wanted to use a sugar/borax poison mix to get rid…
Remix of the Trivictus SCAR by Thanhtacles that can be friction fit onto the end of a Dart Zone dictator and roughly maintains the aesthetic of the original barrel lug. Looks good enough, prints and attaches without hassle, and makes your…
An extended magazine for the Dart Zone Dictator. You can load darts from either side, as many as you can fit. There are two versions: a single length version for printing on large format printers, and a two-half version with a binder…
Project: https://simracing-pc.de/en/2023/08/08/diy-project-tactile-feedback-abs-effect-for-simracing-pedals/ Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer Brand: Anycubic Printer: Vyper…
Again, no idea who wants this, but here's an alternate muzzle for the Dart Zone Dictator for use with longer barrels, with no need to cut the blaster. You can find the other collet pieces at: Spigot SCAR (Silly Scar) (Half Dart and…
Disclaimer: This model use @Xuis delightful Skådis T-Clip System , go check his page! What is this? This is a little TicTacToe to get distracted by instead of finishing this project you started 3 months ago. Assembly instruction…
Es lässt sich wie das normale spielen nur das man bei diesem mehrere gewinn Möglichkeiten hat. Solang die Zylinder kleiner sind als der nächst Große kann man sie einfach übereinander stecken und so denn platz wieder für sich beanspruchen.…
This is a variant of the well known “TicTacToe” game. To make it more interesting now you have to play in 3 dimensions. Beware, it is not easy to recognise a row in all 3 dimensions! In this game each player has 3x3 pieces. (The 3mf and…
Gniazdo z mini areną zamknięte w pudełku po dużych tictacach. Gniazdo z nawadnianiem automatycznym - wystarczy ok. 10 ml gipsu budowlanego, który zapewni stałą wilgotność w gnieździe. Wodę do nawadniania dostarczamy za pomocą probówki o…
A spring spacer for the dart zone max dictator. Has a loose fit so either scale it up by 1mm or wrap tape around the edges to get it to sit still in the spring guide. Scale vertically to get the amount of precompression you want. 15mm got…
2 color Tic Tac Toe designed for LM Show Christmas Print Drive At Layer 2.20 make a color change swap to allow for a different color for game. 0.2 layer height, 4 top, bottom, walls with 15% infill Turn on Ironing all top surfaces No…
Drop-in Safety Delete button for the Adventure Force (Dart Zone) Conquest Pro foam dart blaster. Also Fits the newer Max Dictator Print standing on end as provided. Category: Toy & Game Accessories
I know the Dictator was released in 2022, so I don't really know who needs this, but here's an extended pump grip for the Dart Zone Dictator, styled similar to the one sold on Foam Pro Shop. HARDWARE NEEDED: (2) toy screws (just use the…
Lotso Fais sur Nomad Sculpt TableTop édition FanArt Pre-Supporté 32mm Socle : https://www.printables.com/model/1701671-base-28mm-32mm Autres liens : Pinterest : https://pin.it/3WuBRdGWm Cults : https://cults3d.com/@RaphGrj Printable :…
A textured remix of the Ant Nest TicTac box by TheCraftingAnt ( https://www.thingiverse.com/thing:6543513 ) Added my cover for the nest to the files ( https://www.thingiverse.com/thing:6560208 ) Tube_feeder by TheCraftingAnt Print…
Dictator Drop in muzzle replacement and barrel extension collet. No support required.
Cordless tool battery adapter. Victa / Briggs & Stratton Battery to Milwaukee skin tools Extra hardware 6mm male spade connector x2 wire female fuse terminal x3 M3 x10mm bolt & Hex nut x2 470k resistor spring (0.5mm, 35mm, 5mm) a…
Project: https://simracing-pc.de/en/2022/06/13/diy-project-new-end-stop-for-the-asetek-invicta-pedals/ Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer: Anycubic Vyper Rafts: No **Resolution:** 0.16 Infill: 30 **Filament:**…
rintable target for public urinals featuring the world's least favorite dictator
This modification is easy to do. 1x voron V0 display 1x micro usb cable long enough to get from the pi zero2 or other pi to the screen (not sure at the pi that it will fit). Pi zero 2 fits because ive used that one. 1x 4 pin jst XH…
Project Homepage: https://lerndinge.at/wp/logobox/ Deutsch: https://www.youtube.com/watch?v=a2xXxlJcjbU Deutsch: Die Logobox wurde für den Einsatz in der Primarstufe entwickelt. Angepasst an den kognitiven Entwicklungsstand sollen mit…
Printed with our PLA: PLA Vanille PLA Lavendel PLA Grasgrün
Asetek Invicta Clutch pedal smooth pedal plate These make the pedals sock friendly or nicer for someone that wants a smooth pedal Uses 2 countersunk bolts (will need to be sourced) and nylock nuts to hold into place. Print upside down so…
We needed a solution for attaching felt glides to the Invicta Euphoria chair model. The original screws with plastic heads scratched the floor and there was too little contact surface to attach felt glides. The chair leg adapters are…
Asetek Rumble motors, please see photo as how they fit, 2 bolts and nuts needed to secure to pedal No supports needed, print on flat face Category: Other
THIS IS AN PROTOTYPE anyways this is an dictator pic rail pump grip since i cant find any files on the internet and a freind requested this takes m4 bolts and nuts 11/09/2024 added v1.1 since v.1 cant really flex to fit the dictator so we…
This is a remix of a lid for https://www.printables.com/cs/model/72243-tic-tac-cap-a-game-of-stacking-and-stealing . I did not want to bother with steep overhangs of the original model, so I did this remix. Used a modifier box to set…
A portable version of the classic TicTacToe game with a satisfying snap due to the power of magnets. Ideal for when traveling with kids. Versions for use with 4x2 or 6x3 magnets Optional mount to place it on an angle on a desk. Optional…
3D tic tac toe game with travel box. Best printed with: - layer height: 0.14 - speed 50 mm/s - support (tree, starting from 50%) provided files are: small, med & large markers (print 2 each for both players) playing field (print 4 times)…
Sortie de gaine électrique ICTA diamètre 20 mm avec ou sans trou de fixation.
Portable version for traveling: 3D printed game set takes the timeless tic-tac-toe and supercharges it with an array of exciting features. The game board boasts a stunning, intricate design, while the X and O pieces are transformed into…
Dictator Scar to bring it under 160FPS, has porting, shoots lasers
Game suitable for 6 players but can be adopted to more players. This game is a cross over between Jenga and TicTacToe or Pattern game. Jenga X TicTacToe This game is suitable for 2 players. You select one of the respective shapes and keep…
A quick cover for the Ant Nest TicTac box by TheCraftingAnt ( https://www.thingiverse.com/thing:6543513 ) Make sure you flip it in your slicer so the flat top of the cover is on the build plate. Print Settings Printer Brand: ELEGOO…
A basic 3D TicTacToe Game. Larger Figures can be placed over smaller ones to take over a specific Field.
This is a sleeve that will cover a 12" barrel of 17/32 brass for the dart zone dictator. It has a mount for the EX BCAR system. Print with supports, potentially flip upside down.
This TicTacToe is an extended version of the normal variant. How to play: The game starts with the cross in any place. Each player has 4 figures. Now each player can take turns performing an action: 1. place a pawn on a square of choice…
TicTacToe Genius, with more fun. You have to Scale the Figures in the Slicer. 100% 78% 58% (Big/Medium/Small Figures) I printed 3x large, 3x medium and 3x small Figures for each color. For the Figure-Stand i use 8x NeodymMagnets with 10mm…
A much more comfortable stock for the Dictator with a huge flare for easy reloads. Includes step file for easy remixing.
Die Rahmengröße ist 12cm x 12cm. Bildausschnitt 9cm x 9cm. Vorder- und Rückseite halten mit eingedruckten Magneten (Neodym 7x1) zusammen. In den G-Codes sind die Druckstopps zum Einlegen der Magnete und der Farbwechsel schon mit drin. Der…
I use the empty TicTac boxes for small parts storage so I made the “Rac” to hold them.
cover for the TicTacToe board you can find at https://www.printables.com/model/564388
First sketches were made already in 2023, at the end of 2024 I forced myself to create the first trial version, which surprisingly came out :). Print in place! Dimensions of the folded game 85x80x12mm. 9 pawns can be inside when closed.…
I keep different little parts in tic tac bottles. This keeps eighteen bottles at a handy slant for easy access.
Suppressor For Dart Zone max Dictator I used Pet-g pretty good If it doesn't work your nerf gun is making noise from spring oil and not good sealant so apply lube. gd luck twin
