Counting matching models…
I'd recommend printing the full set Print from ABS/ASA/PETG - I don't recommend PLA USE the thinnest LH possible for your printer After install, recalibrate your printer and redo input shaping.
If you encounter significant variations in bed level, especially in one of the corners, consider printing these shims and placing them under the bed supports. By doing so, your bed level will greatly improve and become easier to adjust.…
Now also Avaidable as Damascus Steel and Slaughter . Crimson Web version of the Butterfly from Counter-Strike. To assemble it, you have to glue the ornaments on the Handle, or print the multi material version. The separator and the pin…
UPDATE: Added 1.1 and 1.2mm shims UPDATE: New version with markings. It doesn't require to destroy the top level of bed to install, like some modifications i've seen before. It's designed, so you can put it from the side and rotate into…
I recently came across another Creality owner that had noticed his gantry was off axis, this will off course cause some serious layer shifting on bigger prints. Upon checking myself (I used the PEI sheet that comes along with the printer…
Recommended slicer settings: Layer height: 0.1 Initial Layer height: 0.1 Infill: 100% Print material: Preferably ABS+ or ASA, although I've printed it using PLA and it's holding up well. Tutorial: A good tutorial on how to use the shims…
Use a toothpick to attach the top crystal Make sure to add proper supports for the bow tie or use the included 3mf file Differences from the remixed model: Better looking top sim crystal, actually symmetric Fixed geometry in some places…
EDIT (04/11/2022) : Added an annex to detail how I attached the plumbob into the headband and the small cylinder .STL file. The original design, was intended to use 6 x 3 mm cilindrical neodymium magnets to keep the two parts together.…
The extended handle version can be used not only for the rear left bed level point but as a regular shim as it is more convenient to install
Step into a storybook with this enchanting Whimsical Fairy Cottage ! Perfectly detailed with curling vines, layered shingles, arched windows, and a heart-carved door, this model brings charm and fantasy wherever you place it. Whether…
Just "discolored" remix with added brim on selected areas
My “Simson” S51 for printing. I worked on the 3D data set for a long time, now it is finished and printable. You need some patience and sensitivity when breaking out the support geometry... Have fun printing.
Simson S51 Werkzeugkasten Der Werkzeugkasten setzt sich aus folgenden Bauteilen zusammen: der Kiste selbst dem Deckel einem Briefkastenschloss 4 kleinen Kabelbindern Das Schloss sollte einen Durchmesser von 16 mm haben und einer Länge von…
The dancing cat with headphones meme from The Sims videogame (with bouncy head) Recommended settings: - 10% infill and 2 walls is enough - Use a modifier on the contact area of the crystal and headphones to 100% infill - Supports are…
I was struggling with my bed gantry being not level, and the Anycubic wiki wanted me to adjust the belt and leadscrews, but that was too much work for the fine adjustment I wanted to make, so I made these little spacers to go between the…
I've quite a collection of Skyrim models and I have here uploaded a vew different files some from https://www.pepakura.eu/skyrim-full-daedric-armor-male/ and some taken from Garys mods. I'll upload the female version next so Hopefully…
Pictured is Overture neon green silk PLA with 0.2mm layer height. Just print all three pieces and glue together. The hollow shell design of the plumbob is lightweight but reinforced in the area that attaches to the clip. Perfect for Sims…
моделька с отдельной головой и местом под пружинку от шариковой ручки
Here are Skyrims daedric weapons. Print instructions Category: 3D Printing
Bring a touch of gaming nostalgia and feline charm to your desk! This adorable kitten figurine combines the iconic The Sims aesthetic with a modern gamer vibe. The best part? This model is monolithic , meaning the cat, the headset, the…
Print Settings Rim Materials: PLA - quick and easy, but could break from UV radiation PETG - should be a bit tougher and less prone to failure Print Settings: Walls: 3 Infill: does not matter (should be solid at all parts anyways)…
Been seeing videos of everybody putting rims on their garbage cans. So i made some for myself. These are my version of some Dodge wheels. This print is 3 parts so there is no need for supports or multi material system. This wheel snapps…
Rims for RC car. Made in Blender.
Dial your bed In. Parametric Shims work with your Stock Hard Spacers and Silicone spacers found on AliExpress or Amazon Premade Shims for Stock Factory Spacer and Silicone Spacer if you don't want or need to adjust the size. No worries…
Off road bogger and street bash style wheels, all in one tire/rim combo like Hotwheels 1$ car wheels. The outer diameter is standard hot wheels offroad tire sizes (13mm and 16mm) for .8mm axle (hot wheels dimension). The street bashers…
3D-модель легендарного котенка из The Sims, ставшего героем вирусного мема. Тот самый котик в больших белых наушниках и с розовым бантиком, который едет в транспорте под стильный трек. Статичная фигура!!!
A whole set of whimsical looking Halloween Pumpkins . They all have their own character and look, I made them with the help of AI and finished them off by digital sculpting some details and blemishes. Happy halloween and happy printing!
Straightens the belt path, increases accuracy, and reduces belt wear against X gantry. For Ender 3 V2 Neo , or similar carriages. This greatly increased the smoothness of the movement on my X axis. It's a must have mod in my opinion.…
So i made some more rims and tires. This time for Sakura D4, but should fit any 1:10 drift/road rc. Two types in the pack 5 ray and 5x2 ray rim, both for 12mm HEX. Wheels shown are printed in Verbatim PLA and Fiberflex 30D.
ENDER 3 V3 KE BED LEVELING SHIMS INCLUDED SPREADSHEET TO CALCULATE SHIMS OR SPACERS
Just a mount for a digital tacho. Its made for the koso db01rn. You screw it directly under the handlebar as seen on the photos. You need to enable supports to print it properly. I used ASA+.…
Good luck Ricky, hope this is what your after and please post some picks if and when you print it. Please Check the sizing suits your needs also, Cheers Jace
100% infill at rectilinear is what you want. Pick something with detail ≤ 0.10mm to get a smooth shim. Thicker side is on top of text.
Mehr Luft, mehr Leistung: Der 3D-Druck Ansaugstutzen Dein Motor lechzt nach mehr Luft? Dann ist der Ansaugstutzen genau die richtige Lösung für dich! Mit diesem Upgrade verpasst du deinem originalen Herzkasten ein kraftvolles Tuning, das…
After I didn't find anything suitable. I decided to design rims for my Speed Champions vehicles myself. I have therefore designed 8 different sets. In order not to put the same rims on everyone. There should be something for everyone. ;-)
Canopic jars were used by ancient Egyptians to store and protect the mummified organs of the dead. The four sons of Horus, depicted on the lids, are jackal-headed Duamutef who protects the stomach, baboon-headed Hapi who protects the…
This is a single piece, half sized version of the cathedral model. I thickened some walls to make sure all features can be sliced properly at this small size. This model also functions as The Hardest Stringing Test Ever. Print Settings…
I printed it with hatchbox transparent green pla and had to dry it out for 8 hours to get the moisture out. You can print it in any of color you want and it does not need to be transparent, as the walls are printed thin enough that it…
Just some rims to add style to your Luba. With a hiding spot for your AirTag.
Bring charm to your garden or shelf with this cute and chubby garden gnome figurine ! Designed with a minimalist, handcrafted look , this whimsical gnome features a long textured beard , a tall pointed hat that droops slightly at the top,…
I made these shims to help line up the motor with leadscrew. The exact process is documented in my video on removing Z banding. These shims are not a one-size-fits-all, you will likely have to make them thicker or thinner based on your…
This is a great alternative for a Tundra Tire or larger Bush Type wheels on your RC plane. Print the Tire with TPU with 2 wall thickness and 10% or less infill. The rim can be printed in PLA with 3 wall thickness or so with 30% infill or…
Ммм ага, на канал зайди ко мне Ммм ага, лайк ведет меня к мечте
zusätzlich benötigt wird Metall Stück des Schlüssels. Optik alte Version des Simson Logos.
Simson S51 Motor zum drucken. Der Motor kann auf die gewünschte Größe skaliert werden. Viel Spaß beim drucken :-)
Jeder Sims Spieler kennt ihn der grüne Diamant der über den Köpfen der Sims schwebt. Obwohl er auf der grünen Farbe nach einen Smaragd hindeutet wird er dennoch als Diamant bezeichnet oder als Plumbob. Hier stelle ich die Diamantform des…
____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
Eine nützliches Werkzeug und ein muss für jeden Simsonfahrer mit BFV Vergaser. Einfach den Vergaser ausbauen und den Schwimmer Freilegen. Dann den Aufsatz auf die Dichtfläche (nach entfernen dieser) stecken und den Schwimmer in sowohl ein…
This is a remix of Simson S50 S51 Kofferraum unter Sitzbank Handschuhfach by Clessi . I did remodel it in FreeCAD RealThunder's fork . It has 3mm wall thickness and you can lock it with a small lock also there is a logo on both ends small…
This is an alternative wheel design for the Landy Mini from 3D Sets ! I took the original model of the rim, and swapped the center section for a 5 spoke design. The reception of the axle and the tire are unchanged. If you like check out…
Meet the cheerful young female gnome explorer , full of curiosity and charm. Designed in a minimalist, handcrafted style , she wears a tall, bent-pointed hat that hides her eyes completely—only a round nose peeks out. She has no beard ,…
Keychain Simson Logo for real Simson fans!
EDIT 2 Here are the 0.85" wide rims and tire for the front of your 2WD if you want that dune buggy look. EDIT 1 I added rim design 011 through 014. I also slightly modified rim 008 by adding an 0.030" fillet on the top edges. ORIGINAL My…
Kitten cat Plumbob headphones sims meme on train
Designed for GMADE MT-1902, but will probably fit variety of other tires. Rim diameter is 49mm and width is 30mm (+4mm with beadlocks installed). Hardware: 1x SHCS M3x16-25 through the center 21x SHCS M2x6-10 for beadlock 3x SHCS M2x6 for…
A keychain, Recommended Printing Method (SLA)
Leveling shims for your Blackstone. The original version provides a single size, which gives you a ¼" rise with a wheel. Each one you stack, though, gives you ½" increase. I needed ½" total height increase, so I wanted to remix this.…
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
My friend owns stunning Mercedes Benzs SL500 R129 with 5l V8. This car definitely needs some beautiful wheels and these RH AB Topline are stunning with no doubt. But he found out that wheel caps are with no typical diameter and original…
LİSANSI GEREĞİ TİCARİ AMAÇLI KULLANIMA AÇIK DEĞİLDİR. ODTÜ içindeyseniz baskıları benden temin edebilirsiniz. (instagram.com/olbia.design) DevrimSu is a riot control vehicle, ready to protect you from the unjust actions of the corrupted…
Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch Playful ghost statue featuring a cheeky, humorous expression and whimsical pose. This friendly spirit sculpture offers a lighthearted take on…
The Lego model 10330 - McLaren MP4/4 Senna - comes with tyres that are much narrower than the real cars. This model is based on @tomvit work, and provides separate parts for tyres and rims to be printed individually. For best effect, I…
A model of one of my favourite pokemon, Whimsicott. Printed on my EPAX X1K, I added the supported model in case anyone would rather use it instead of adding their own supports. I would not recommend printing on an FDM machine, though…
Show-Kennzeichen für dein Moped. Achtung!!! !!Das Show-Kennzeichen ist nur ein Show-Kennzeichen!! Nicht im normalen Straßenverkehr benutzen. Nur für Show-Zwecke! (definitiv nicht STVO Konform) Wähle ein eigenes Design: -lade die Datei…
In this Thing I have separated the rim and tyres for my Willys Jeep, so they can be printed in different colors and materials. Original Thing: https://www.thingiverse.com/thing:4834434 Category: Vehicles
Druckteil für ein Simson Zündschlüssel. Zunge kann aus ein anderen entnommen werden.
Luftfilterpatrone für alle Simson Modelle
More spare parts available: Air conditioning trim pack https://cults3d.com/es/modelo-3d/variado/air-conditioner-trims-for-seat-ibiza-ii I also have several spare parts for Seat Ibiza II: Spare hinge for the trunk tray:…
EDIT 07/09 @ 1:58 PM: Due to the urgency of our situation, this collection was uploaded with files designed by Prusa Research without me realizing, I have removed said files but will link them so you can find them, the remaining designs…
Catching up on some of my Skyrim files, Cheers Jace
This 3D-printed Furniture Wedge Set includes five precise thicknesses (1 mm, 2 mm, 3 mm, 4 mm and 5 mm), designed for a wide range of household, workshop, and DIY uses. Each wedge provides an accurate, reusable solution for leveling…
Kofferraum für den S50/S51. Deckel und Körper sitzen sehr straff zusammen. Ich habe die Dateien vom Vorbesitzer übernommen. Die STL. Dateien sind falsch skaliert. Diese müssen auf 10% skaliert werden, damit diese passen. Die 3mf Dateien…
Remix of Low Profile Prusa Mini Anti-Vibration Feet by Alexander Þór . This is the most effective upgrade I have made for my printer. Absolutely brilliant model. The printer wobbled after installing these dampening feet, so I modeled…
We've all got that one table that just doesn't sit right, or perhaps you're at the coffee shop and the chair keeps rocking. Here's your all-in-one quick solution to stop the shimmy: shims! Slide the sizer into the gap to quickly determine…
I was looking for some entry and exit tiles to print for our Gloomhaven sessions but couldn't find any. Therefore, I created them according to the designs in Jaws of the Lion, Gloomhaven, and Frosthaven rule books. These tiles fit the…
Simson Schriftzug alt für den Tank oder Seitendeckel ;)
This is a model from the game Crimson Desert. A sealed artifact from The Abyss. Which I recreated with the same engravings. I made two variants, one with smooth edges on all the engravings, the other is sharp (in the pictures it's the…
The VOLK Racing TE37 is a legendary forged monoblock wheel by RAYS Engineering , known for its lightweight, strength, and iconic six-spoke design . Designed for motorsports and street performance , it enhances handling, acceleration, and…
Hi with help of AI, I made swanga's rims.
I started with an STL i downloaded of the karambit, and then i edited it into 3 parts so you can print the middle out of metal if you want, and the left and right halves of the handle out of something else like plastic if you want. I…
Simson Logo. For 2 color print set filament change at layer in your slicer.
printed whit 2mm the pegs aren't necessarily for joining the crystal to together but are to help aline the two halves if glueing. be careful when screwing the Crystal into the beam as it as snapped on me after it got stuck. I have…
A new body for the OpenRC You just replace the body parts from the OpenRC F1 with this body I have included hub caps as well to complete the look. This will work with 3D Printed Wheels and Rims or retail RC wheels as well. Support me on…
This is a licence plate holder for S51. The shape of the rear fender is adapted, the distance between the mounting holes is smaller then from the technical drawing (german licence plate) due to outward moving of the screws. I'd appreciate…
I modeled this simple plumbob from the Sims games as a prop for a graduation cap. The model consists of only one half of the plumbob. Just print two of them in vase mode and glue them together at the base. I also included a small stem…
Simson Tuning Lüfterrad für alle Modelle mit einem zwangsgekühlten Motor. Mit einer neuen VAPE Zündanlage. Wichtig! Das Modell passt nur auf das Polrad der VAPE Zündung, nicht auf die Originale Unterbrecher Schwungscheibe! Die Druckdatei…
Step into a fairytale with this enchanting Fantasy Treehouse ! Perched snugly between twisting, leafless branches, this magical little abode features a charming rounded door, curved balcony, and a conical shingled roof that screams…
1.9" scale beadlock rims - Willys style (12mm hex) For each rim you need 5 M2 screws including nuts and one screw for fixing the front- and back- cover. Have fun. Print Settings Resolution: 0.1-0.3 Infill: 15-25% Filament material: PLA,…
This is a simple shim for your toilet, it is ¼" at the highest point. I printed mine out of tpu so it is very durable I recommend printing at 0.2mm or higher so you get that staircase effect, that will help the shim stay in place. All…
The Crimson Firehawk appears prominently in Star Wars: Young Jedi Adventures . This model has versions for its appearances in Season 1 and 2. On the Season 2 version, the engines can rotate, the wings can fold up and down, and the nozzles…
14 incarnations of the Doctor from William Hartnell to Jodie Whittaker face off against 15 of the Doctor's most feared opponents, including two incarnations of the Master, in this whimsically designed chess set. The perfect chess set for…
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with treads for…
Give your LEGO® Porsche 911 (set 10295) the classic wheels it deserves! 🏁 Two iconic Porsche rim styles, made to fit the new 30.4×20 LEGO® tires: • ATS “cookie cutter” – factory standard on many classic Porsches • Fuchs – the legendary…
Some more awesome PDO's converted from Pepakura.com As always check the size suits your need and note this will need to be sliced up to suit your printer, Cheers Jace
The Sims Diamond aka. The "Plumbob" in bead-version for drawstrings or sim ilar applications. *COMING*Update: Added a new design - End caps for your zipper/slider/pull tab. Dimensions: Beads: X Y Z 3mm hole-version = 15x15x25mm. 4mm…
This is a licence plate holder for KR51. The shape of the hull is adapted, the distance between the mounting holes is smaller then from the technical drawing (german licence plate) due to outward moving of the screws. I'd appreciate some…
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with treads for…
This charming gardener gnome is a delightful new addition to the whimsical gnome collection. She features a tall, pointed hat that bends gently at the top and fully covers her eyes, with only her round nose peeking out. Like the rest of…
A charming garden gnome figurine designed in a whimsical, handcrafted style . This gnome features a long textured beard with a full mustache , and a tall pointed hat that bends slightly at the top, completely covering his eyes — only his…
Because the original rims of LEGO ® Porsche 911 RSR set do not look like Porsche (Pic.3), here is my version of RSR rims and tires. For the rims I used black filament. The tires I printed out of flexfilament from Extruder. The…
