1,923 models
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
A bicycle chain gets longer, when it is worn. This tool helps detecting when is stretched by 0.5% and 1% respectively. Those are two key points to detect when a chain needs changing. 0% is the stretch of a new chain obviously Below 0.5% a…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Self Watering Plant Pot With Water Indicator The original outer pot is 150 mm in diameter for the inside pot to fit. I use silver silk filament from Ziro bought on Amazon for 259 swedish krona. If you wish other dimension you can message…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Für den Mk3s gemacht, andere haben evtl einen anderen Führungsstangen-Abstand. Ein einfacher Halter, um eine Messuhr an die X-Achsen Führung zu klipsen. Die Messuhr ist auf gleicher Position wie die Nozzle und kann händisch in x Richtung…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
Extrusion indicator in the shape of the Open Hardware symbol. Requires two 8x3mm magnets and some superglue. Print instructions No supports. One color change. After it's printed, please scrape the recess so that the magnets will sit flat.…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I wanted to create a cool X-axis visualizer for the Prusa Mini. I designed this based on a similar concept that I saw for the MK3S. This visualizer requires (1) 8x3mm magnet and super glue to attach the magnet to the X-Axis. The two…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
i3MK3S+ ,or similar, Extruder Indicator in the shape of a clock key. Glue a 8x3mm rare earth magnet on to the bottom. Print upright/vertically with supports everywhere.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Bracket to adapt the Sunshine PIP dial indicator to the Ender 3 Neo V2 and alike head style.
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
What better way to indicate a busy printer than the spinning beach ball. Since the blades are modular and snaps together, you can mix and match colors to create your own custom spinner. You don't even have to use all six blades, use two…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
This is ECI mag block for a Ruger 10/22 or Ruger Precision Rifle. Keeps the bolt from closing.
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Self Watering Plant Pot With Water Indicator The original outer pot is 150 mm in diameter for the inside pot to fit. If you wish other dimension you can message me. This pot is really good and it plenty of room for the plant and water and…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
A filament indicator for Prusament NFC spools . Update 2026-01-27: Removed 'feet' versions, added TPU. Update 2026-01-14: Uploaded V2. On V1 the second and third number of grams were swapped. It fits on 2 places on each sides of the…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
There are a lot of miniature base's and health/hit trackers out there but nothing that had everything I was looking for, so I set out to make my own from ground up to check all the boxes that were must haves for me. I made these mainly…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I was looking for a smaller type of extruder indicator, did not find one small enough for my needs, so made this one. This will fit within the dimensions of the extruder motor backside and is intended for use with a 7x3 mm magnet glued in…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Es un practico pastillero semanal. Caben tres pastillas por compartimento bastante bien. La unión entre la tapa y el pastillero la he realizado con un tornillo auto roscante con arandela de M3x10mm pavonado negro. Lo he hecho por…
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
Josef Prusa's tattoo as an indicator of the Z axis for the Original Prusa Mini Print instructions The print is black on both sides, so start with black when printing the Gcode printed. I used Prusament black / orange. Print settings Layer…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Inspirado por algunos indicadores de estados publicados que están en ingles, yo he hecho mi propia versión de los estados en idioma español. Se puede imprimir con cambio de color. Adjunto el fichero de fusion360 por si quieres hacer…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
This is an indicator holder for use on a lathe with and AXA toolpost. As the title indicates, this is one of several versions so pick the one you like - or make your own improved version! Similar holders have been made by others before,…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
I wanted LED indicators for my Christmas light controller. It will hold 20 channels and can easily be glued to where you want it. My LED's are 4.8mm in diameter so I provided a 5mm and a 4.8mm mount. You can buy this here!…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
The is a replacement back for a standard dial indicator.
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
This is a "lock" which means you can tell at a glance (just poke your head in the room) if the cage doors are completely closed. It's for piece of mind since otherwise to know the cage is fully closed you must physically tug on each door,…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Since the CORE One does not have a handle to slide the vent open and closed, I decided to create one. After I created an initial handle, I wanted to see if it was open/closed at a glance. I printed in PETG, though should work fine in any…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
This part takes the place of a humidity sensor in filament boxes. The idea is that sometimes we are not interested in the % R.H. reading, we only want to see (at a glance) whether it's time to change the desiccant inside the filament box.…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Hey team, I've put together a simple lug / wheel nut dust cover to suit 21mm nuts. This model could be scaled up or down to suit your needs. The reason for this design is twofold; To keep dirt and water away from your wheel nuts and wheel…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
I was gearing up for installing @Hedo3D's Filament Indicator mod when I learned about the No Chimney mod . While the MMU3 chimney has been working flawlessly, the chimney is a bit in the way when unscrewing the QSM-M5 fitting (which you…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
I added headlights to my Troybilt snowblower and thought lights shining down where I'm walking would be helpful. I created this 90 degree bracket to hold "Ricoy 3/4" Round LED Underbody Rock Front Rear Side Marker Indicators Light…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
The Ninebot max G2 is a great kick scooter and already has good indicator lights built into the steering bar ends. The downside is that those indicators are hardly visible from behind because the driver blocks them from view. Since the…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Just a collection of simple extruder position indicators. It's not derived from other models, but it's definitely been inspired by them. This uses a little 6mm x 2mm neodymium disc magnet. Friction fit seems to be sufficient.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
G-code contains a pause to insert 4 magnets 8 x 2 mm and a colour change.
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Extrusion Indicator with Josef Prusa's face over an open-hardware symbol. 3 (M600) color changes utilizing 4 colors. Use two 8x3mm magnets glued together, then glued onto the back of the indicator. Print instructions There are 3 automatic…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Hi, I designed this to verify the accuracy level of the bed, this bracket is designed for an EVA hotend but if you have a 40x40 fan you should use this to level the bed. Printing: I printed it in this orientation: -infill 40% - walls 3 I…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
I could not find a battery cover, so I created one myself. I don’t want unprotected batteries in my bag! So here it is: the DJI Flip Intelligent Battery cover. Fits nicely into place, locked using the battery-locks. As a bonus you can use…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
Any Metroid fans around? Here is my take on Samus' emblem that you can use as an extruder indicator. Print in PETG or PLA with 100% infill and glue 2x 8x3mm magnets to the back of the print. For multiple colors use print stops where…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
CZ Adaptér pro montáž univerzálních směrových LED světel https://www.aliexpress.com/item/32880546232.html?spm=a2g0s.12269583.0.0.633e42a744FoPJ ). Montážní adaptéry se dají také koupit, ale na DL1000 2014 > neapasují (i když prodejci…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
This is a remix of @Extrutim's excellent extruder indicator/visualizer that stays centered and uses press-fit magnets.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Voici des indicateur de taille de buse pour votre imprimante Prusa XL, La nouvelle version se clips sans à avoir a détaché le tube guide fils.
Print approx. €6.22–€7.61 excl. taxPreliminary estimate for PETGSource material: PET
A simple level indicator for nearly every vessel. You only need a transparent hose with an outer diameter of 10mm, two zip ties and some screws. Happy printing :)
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET
Another extruder indicator, but with some Chinese element ;) Typical stuff, black and white filament for the traditional look, but you can also do other color! two 8MM magnets are needed. You need to glue the first magnet into the base.…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Fundicator Silly Walk (X-Axis Cover PRUSA I3 MK3S+, Visualizer, Indicator) Thank you Lecter for your Inspiration 1x M3x6 from Spare Bag 1x Body 1x Leg 1x X-Axis Cover (flat or embedded) (remixed from…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Jet another rotation indicator. But ist`s parametric! Need for a 8mmx2mm magnet and some super glue. To use parameter one needs a OpenSCAD Editor. Print instructions Update: New more Easy OpenSCAD File! 2022-05-01 Just use standard…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Originally created for Frosthaven's Blinkblade character to signify Green “Fast” or Red “Slow” turns, this can also be used for your own Brazilian Barbeque. Print two times -- the pieces interlock. I added a little glue to seal the deal,…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
This is a pair of clamps for front turn signal indicator holders of Honda XBR 500. The original part is a hard rubber that worn out after 30 years making the indicators hang sadly. With this sturdy clamp they are happily straight again.…
Print approx. €28.61–€34.96 excl. taxPreliminary estimate for one variant
The joseph joseph cutting board set does not have an indicator for each cutting board. I then printed this simple indicator to associate each cutting board with a different type of food fruit-meat-vegetable-fish. Support required. Il set…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Dial Indicator Quick Release Mount for a Starret 3025-4821 dial indicator to fit a 250-000 quick release toolpost. Made to fit a 7" Mini Lathe and enables centering of stock up to ~ 80mm. I printed in PETG with 5 outer layers and added a…
Print approx. €4.96–€6.07 excl. taxPreliminary estimate for PETGSource material: PET
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Default as modeled Glue a magnet to the back after printing.
Print approx. €0.36–€0.45 excl. taxPreliminary estimate for one variant
Mount a dial indicator on your V1 Engineering LowRider CNC 3 or 4 using design8studio's kinematic mount . You'll need: Dial Indicator 1/4" or M6 nut (1/4" is a tighter fit) 1/4" or M6 bolt - 1" or 25mm minimum. I'm using a $15 Wen with…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
I wanted to upgrade my quad's headlights and indicators from the originals to these: HIGHSIDER pro Headlight Dual-Stream Next LED https://www.highsider.de/produkt/highsider-dual-stream-next-led-scheinwerfer/ Kellermann Rhombus S Dark LED…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
These Dial Indicator Mounts are specifically designed for the Clockwise Dial Indicator and rebranded variants of it. May work with others untested. Here is Amazon link to purchase Clockwise Dail Indicator Clockwise Dail Indicator with…
Hello everyone! Keep your batteries organised in style with this unique mini beer crate battery holder ! Designed as a remix from the original model on Printables, this version comes with practical enhancements like battery indicators…
I still had some black showing on my printer so I made this Extruder Indicator for the Ender 3 V3 SE. I love watching it spin around when printing. https://www.facebook.com/KD9WNR/videos/734574294767306?idorvanity=347538964267031
I noticed there's nothing like this on Printables so I upload my remix of spricvector's design (https://www.thingiverse.com/thing:2213031), which is also a remix of FactoryStandard's original model…
Universal Door Sliding Sign A simple frame with sliding pane to select between two large 5x5cm signs. The signage is just a simple sheet of paper and can be exchanged from above. The template (to be printed and cut-out) is also included…
A poop/purge basket designed for Bambu Lab A1 Mini. It was designed to be light weight and friction mounted to the purge wiper. This Mini version is 40mm tall. This remix changes : Included BambuLab logo added fill-indicator holes
This is my take on a dirty/clean dishwasher indicator. There are some amazing versions of this print out there, but this was how I wanted mine. Print Instructions PETG seems to work well at 0.2mm layer height. Try out some more materials…
An extuder motor indicator made from a 3D Printable Jet Engine's fan by CATIAV5FTW - scaled down to 25%, with a cone or without. Link to this awesome printable jet engine here: Thingiverse There are three versions: With an integrated cone…
Simracing LED Flag Indicator based on an Arduino Nano and an 8x8 WS2812 LED matrix. You can indicate flags, gear, pit limiter, or whatever you like. If you like, you can put the diffusor cover on top. Frotn part with integrated diffusor…
After learning about the rotation indicators for the extruder motor, I loved the idea, but I didn't really like any of the designs I was seeing. I wanted a gear/cog but couldn't find any I liked. So I made my own, I just wanted one but…
Ever forget to close up your gas cylinders and then donate your bottle gas to the atmosphere? This project fits onto a 5-lobe Sherwood cylinder gas valve and provides an instant visual indicator if the valve is opened or closed: The…
A while ago I saw an extruder indicator consisting of a hamsterwheel and a silhouette of an hamster in it ( https://www.thingiverse.com/thing:3139180 ). I re-designed the wheel from scratch, took a pikachu model from Thingiverse (…
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
A very easy-to-build Airspeed Indicator for flight simulation. It comes in two different versions: either articulation by an SG-90 micro servo or with a 28BYJ-48 stepper motor (recommended). UPDATE 2024-12-21: Fusion 360 Source added…
This is a slightly modified version of the original Attitude Indicator by ZockZock . It provides a new designed bezel (as pdf) and a profiled indicator for two color print (white on black). Design and color scheme resembles the original…
A simple extruder indicator. Two rotating arrows as you know them from loading screens. Required magnet: 8x3mm or 6x3mm If you like check out my other designs too!
Compact keychains Only 10-15min printing per keychain! 6mm keyring hole 2mm tall body (i printed it in PLA and is strong enought) 1mm tall text Print Settings: 0.2mm Layer Height Material : PLA or PETG To achieve multicolour prints with a…
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
This is a simple water level indicator for the hydroponic tower. I adapted a lid for this and fitted it with a hole and a guide for the swim body. The swim body have to be printed with three outer walls and hollow.
===============Update 30Aug=============== a lot of people don't know where to view the bed mesh, you just need to go to your browser. Go to http://192.168.50.229/#/home change the ip to your machine ip, enter the page, then change the…
My Flight Simulation Sixpack Family keeps growing: A fully 3D printed Gyro Compass. Articulation by two standard stepper motors similar to the Altimeter and an encoder for the Heading Bug adjustment. UPDATE 2024-12-21: Fusion 360 source…
This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…
Umpire's 4-dial and 3-dial Indicators These indicators have the dials in the traditional order of strikes, balls, outs, inning. If you prefer a “count order” you can find them here. There are two options of indicator: a four dial…
I really like to see the automatic Z correction doing it's job during prints. To see the tiny movements of the Z correction (Is it working? Is my bed level?), you can just clip this print to an unused part of the leadscrew. No tools or…
(Copied from the original listing on Maker World) DF54 true zero indicator that uses the original screw. Tight fit so it might work without the screw as well. Do not mind the reflections in the picture. Printed with High Quality BBL A1…
Just another design for an extruder rotation indicator/visualizer. Print, glue a 8x3mm Neodymium magnet to it and snap it onto your extruder motor. I have used CorrugatorSupercilii's OpenSCAD Turbine Propeller Generator to generate the…
This was designed to be used with a cylindrical magnet (8mm diameter by 10mm long) This is a press fit, no glue is required... Print instructions 200 microns works fine !
Edit: I added a mirrored STL for anyone that has the indicator on the right side and not the left as I have. To install this addon just print the original planter glue the floater to the indicator and press this addon behind the indicator…
Keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 34mm x 23mm 6mm Keyring hole
Super simple visualizer that stays out of the way. And it prints in like 5 minutes. Just use a small magnet to mount like all the others.
This is ECI mag block for a Ruger 10/22. Keeps the bolt from closing.
New Models added, Hexagon, Ring and Rectangular. Need to give credit to ticktock for the original idea. The indicator uses a green 1206 SMD LED and 22k-ohm SMD resistor. Wanted low current draw and low brightness from LED. Obviously the…
A sailing friend of mine needed a vertical 'Little Hawk' style wind indicator that can be mounted at the front of their monohull dinghy i.e. where the painter is tied. I found Kieran's design. But when printed, I found the balance was…
Always been a fan of the radioactivity sign, so now that i finally have my own 3D printer i couldn't resist to make my own extruder indicator! Compliment it with: 40x40 Fan Cover Radioactive/honeycomb…
A poop/purge basket designed for Bambu Lab A1 Mini. It was designed to be light weight and friction mounted to the purge wiper. This Mini version is 40mm tall. This remix changes : Included BambuLab logo added fill-indicator holes…
Ender 3 Sprite Extruder Rotation Indicators Sprocket and Hexagon
This new hex key holder design has numeric indicators on the front to show the size of the hex keys. I've uploaded two versions of this new design: One with only the numeric hex key sizes (hex_key_holder_without_indicators) One with a…
An indicator to the timemore sculptor 078(s), to help with setting the grind size.
I loved the look of Ardjan's non-flat hamster extruder indicator, but when I read they downgraded a Pikachu model to create the hamster I felt that an incredible opportunity was missed. Thus, I went back to the original Pikachu…
Build Video Here Config Video Here 🛒Buy it as a Kit or Assembled: https://captainbobsim.com/product/heading-indicator-kit-or-assembled/ Bill 'o Materials: x2 BYJ48 Stepper Motors (and Drivers) http://ebay.us/aS1yyZ or…
Wind indicator, without additional bearings. Printed from PLA. After printing the bearings gently hold and move them, then add some oil. The blades for the windmill should be printed with supports. Bearings should be printed at a height…
Today we'll be building an Airspeed indicator for the Cessna 172! This Thingiverse will soon become outdated. For the most up to date models, check out the GitHub: https://github.com/CaptainBobSim/The-Cessna-172-Project-V3 (check section…
My CR-touch may be working, but for whatever reason, my prints are not using the stored bed mesh. (Yes I added M420 S1 blah blah blah) Creality support is dismal and I needed to get back to printing! I designed this indicator mount to be…
It is not really an impact, it's more an indicator. Easy to print and easy to handle. Print it with PETG! Scale calculation: D(wish) /4,5*100% UPDATE: 22.12.23: I made the model a little bit stronger, because it is broken during drilling…
Never forget to put the right bin out again! This wheelie bin model is part of a project which tells you which coloured recycle bin is due to be collected. The code checks your local council for up to date information and this device…
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 30mm x 27mm 6mm Keyring hole
The Printables version will not be updated. The best place to get it is here ! Find the MobiFlight code under Section 2/Instrument Bill 'o Materials: 3D Printed Parts Arduino Mega 2560 (can be shared with other components) x2 BYJ48…
This will give an indication of whether the tension on both belts are equal
This adapter allows to attach a indicator dial to the print head of Bambu Lab Printers (P1P, P1S, X1, X1C) to measure bed flatness. I am using a STEINLE 3105 (EAN 4251285620469) to do the actual measurements. If the adapter does not fit…
The Printables version will not be updated. The best place to get it is GitHub ! Find the code under Section 2/Instruments/VSI To navigate all of the files on your journey towards homecockpitness, * Source Files is where you'll find all…
