100 models
This Fully Enclosed Open Source Cartridge Reader Shell (FEOS) is designed to be durable, well protected, and look stunning on your desk. The shell is a multi piece assembly, the shell base, the cover, battery and the faceplate. The “decoy…
I wanted the cool blue Lumon Industries key card from the show Severance, however nobody had a model of it, so I created this quick design in fusion from a picture of the key card they used, scaled to the size of an RFID card to get the…
Prints with minimal supports. Front panel is press-fit. No tools needed for assembly. For best finish use textured plate.
Fallout Vault-tec Industries light box based on my favourite game franchise. You can chose from two back plates with the hole for the hanging on the wall or without the hole. Stand is also included. I used cob LED trip with USB, 8mm wide.…
Model includes the grip itself and .3mf file With modifiers for adding fuzzy skin for grip already contained on the model. Highly ergonomic grip designed for easy 3D printing, uses the same grip angle as the Magpul MOE K2 grip along with…
Lumon Industries keycard from Severance on AppleTV. Print in blue for MDR, black for security clearance.
I got a set of Bob Smith Industries CA glue and needed to store it in an accessable place. I created a 1x4 Gridfinity bin that perfectly holds the 1 Oz bottles of glue and 2 Oz activator. Here is a link to the set I purchased:…
Wet Willy and Flame Boy - World Industries Figures
Simple and easy, the screw-less flared magwell gives you a much easier time reloading, while being very low profile and still removable. Print in PLA+ or stronger (Just make sure the material has some flex if you ever want to remove it)…
Tony Stark's famous company in Marvel's universe. https://en.wikipedia.org/wiki/Stark_Industries
I used the Gridfinity Generator Fusion360 Add-In (linked below) to create this model. https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac
As always I will promote and REWARD the first people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print at 100% scale. doesn't need to show it with…
This is a quick little balisong trainer that can be printed in around 4 hours. It's quite durable if you use real screws instead of the printed pins I included, but I'm still working on finding the screws locally. I've also included the…
“And all in Lumon’s care shall revel in the bounty of the incentives spur.”
Ergonomic grips for your Airsoft GBBRs for use with Airsoft GBBRs or GBBRs with RS spec selector springs in them. 125 = 12.5 degree Grip angle (Steeper) 165 - 16.5 degree grip angle (more angled) Pick whichever one is most comfortable for…
1 x 1 gridfinity block, holds Bob Smith Industries 2 oz Super Glue
This is a model of the Blight Industries factory from The Owl House. Dimensions Length Width Height 149mm 180mm 90mm The scale should be somewhere around 1:500 - 1:600. Print instructions Printed at 0.15mm layer height. Requires supports.…
Made to work with the Honeycomb Storage Wall system. Requires a single open hollow insert. Does not require supports.
"United in Severance"
Abstergo Industries - Assassin's Creed - Key chain - Portachiavi - Porte Clès - 钥匙链 https://assassinscreed.fandom.com/wiki/Abstergo_Industries Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx…
A lighter or heat may be needed to smooth some edges
I wanted a holder for my two bottles. I have a 2oz. bottle of the Insta-Cure+, and a 2oz. bottle for the Insta-Set. They are a good combination for bonding PLA parts. Because I have a crowded desk, they get moved around all the time. I…
This is a flywheel cage and wheel set for the FDL-GONK, designed to use the new 2207 “Plus” brushless motors from Kelly Industries. The wheels themselves are designed strictly to be printed in sls, as the design is closer to zero…
Shelf to hold two Bob Smith Industries 2 oz Super glue (CLA) bottles on a honeycomb storage wall. Blender file included in case you want to create your own, edit it, etc.
Battery-less variants available for purchase at my shop if you're interested: https://bonzosretro.shop/products/3d-print-sanni-open-source-cart-reader?variant=45933636976918
I got a new balisong trainer and it did not come with a bite handle marker, therefore I designed one myself. It is meant to distinguish between the handle that comes in contact with the blade from the handle that comes into contact with…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Description This Angled Foregrip was designed from scratch, heavily inspired by the ergonomics and aesthetics of the Strike Industries LINK Curved ForeGrip. It is ideal for improving control, retention, and handling of your airsoft…
Praise Kier! Now you can decorate your home or office with a nice Lumon Industries Logo. It is almost as fun as a music dance experience! I hope you enjoy!
I had a modified Dremel CNC and it had some issues so I ended up making a new one from scratch. It's not perfect but it's pretty rigid even if 3D printed. There is a Fusion 360 file because I used what I already had and you should be able…
I got tired of tipping my glue over so I made a larger base. For the common 1/2 oz and 1 oz sizes. Print Settings Printer Brand: Prusa Printer: Prusa Mk1 Supports: No Infill: 15 Category: Hobby
the BSI super glue caps get clogged ocassionally before the bottle is empty. I made a cap and cover to replace clogged and damaged caps to keep using the glue. Instructions: CAP Print cap in PLA, .1mm supports required Cover print the…
A minor remix of Jamie's Gridfinity openSCAD glue_stick holder, so they can hold 1 oz bottles of Bob Smith Industries CA glues. I'm new to openSCAD, and my changes were brute force and may break if you try parametric changes in the…
Israeli Military Industries logo
This design has been modelled and tested to work with the RLA502A720 remote control that accompanies Many Mitsubishi Heavy Industries Split-System Air Conditioner Units. Can be scaled if needed and should have plenty of tolerance for less…
llavero con hueco para meter un rfid dentro.
During installation of our air conditioning, one of the screw covers disappeared (of course…). The visible screw was really bugging me, so I decided to remodel it and try to 3D print it. The part came out quite nice! Of course, there is…
A mix between a Kenworth and Peterbilt semi truck that I have been working on and off on for around 7 months. I will be eventually posting the model for sell on other platforms but I just wanted to see the response I got. Truck will have…
The PSI finishing jaws I originally bought are too large to fit on my 8" PSI lathe, so I modeled these 6" jaws to replace them. Fitment is measured directly off the OEM finishing jaws. Additionally, the OEM rubber work holders are on M6…
This is a simple cover plate for a CW Industries 3-position slide switch. While it may work with other similar slide switches, I offer no guarantees that it will do so.
I liked my CA glue bottle holder https://www.thingiverse.com/thing:4604158 I decided to make one for my epoxy glue bottles. For me, this holds the 4.5 oz., two-part, quick-set epoxy from Bob Smith Industries, about 35.5mm diameter. (Other…
Mount for the Midwest Industries AR-15 Lower Receiver Block on Multiboard. Connects to multiboard with snap fit. All I did was take a lower receiver STL and cut it up, it's quick and dirty but works. Print using your standard settings.
I like the way it looks with both the long ones and the dot at the end, but if you just want to stop the ringing, you only need to use one (1) of the long ones. I don't own any other squid balis, so I don't know if it's compatible with…
I.T. DEPARTMENT - REYNHOLM INDUSTRIES, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Please show your appreciation to Ryujin Industries by advertising their sign on your car, fridge, toilet seat, or computer. *Failure to advertise may result in a corporate fine. No Brim No Supports .8 to .12
Secure PSU using Panhead M4 8mm Screws Note that, according to Meanwell, the maximum screw length in the PSU itself is 3mm Leaves PSU side holes free for mounting of other devices. This version has screw holes for three mounting options…
A Gridfinity holder for a Bob Smith Industries Insta-Set 2oz (or any 35mm) bottle. Prevents the bottle from falling over and potentially spilling onto your bench. Has holes for either 6mmx2mm magnets or M3x6mm countersunk head screws…
yt coaster printed with pla on 0,20mm layers for assembly you need bike 6-12 speed chain
Wire spool organizer for Remington Industires Spools. Use the same end caps and spacers from the 55x20 version from Greecher's Wire spool holders.
There were other models for other variants of the Bob Smith Industries glue, but not for the one I wanted. Now it exists! Store your 1oz BSI CA glue and 2oz insta-set in a 1x2 bin
This is a simple Keychain with a logo of Endfield Industries from Arknights:Endfield. The model was done with the extraced vector image from the game itself, and then modeled in blender. This project was done purely for personal use, as…
Uses one M3x8 countersunk/tapered screw per wing. Use blue loctite on the screws. Fits the Strike Industries Phantom Latchless Charging Handle. I printed it out of annealed Nylon 12 Carbon Fiber but eSun PLA+ should work fine for this…
This is a mast cap for the LD6 lil dude 6 portable mast made by HamRadioDude here is the intro video to that : This mast cap is press fit into the LD6 to retain all the segments of the LD6 for storage. Is also functions as the attachment…
A slight modification/remix to allow use with lil dude 6
After purchasing the design for the shop apron on AdamSavage.com I wanted to make it easier to cut out the leather components. These are stencils for the pockets and harness pieces.
I designed this Stark Industries Tea Coaster Hope you like it.
The host fittings in the model are for 5/8" ID. I was far along before I caught that fact… These are ½" fittings for 1" PVC. I will include the Undocumented SCAD files I hacked together incase you need to make a modification smaller or…
Stark Industries cookie Cutter
It has always bothered me that the cable of my Kärcher vacuum cleaner hung around the cleaner and I was not really able to wrap it around something without having it dropping down all the way. Also during transportation it was a mess. So…
BoM 2 pairs of 3.5mm bullet connector 4 M1.6 x 12mm you need to shorten the bullet connector to 10mm
VENTURE INDUSTRIES WING LOGO
My friend Eric "postalshark" made this nifty lid for repurposing the Pringles snack pack containers. Recently, Eric talked me in to watching a show I quit watching after two slow drawn out episodes that didn't interest me, "Severance".…
Following the success of the popular Jupiter Industries Martianball shoe, the O2 Max, Jupiter Industries has used that technology to design an updated and more technologically advanced door stop for the Printables door stop contest.…
Reynholm Industries - IT Crowd Sign Introduction I like cool logos and I really like the logo of “Reynholm Industries” from “IT Crowd” so I decided to design and print my own sign, so I can hang it onto my wall and just be happy.…
My own DIY approach to make a nice looking 18650 sleeve for the Kodai industries BT-20 power bank. BT-20 Power bank: Kodai-industries Needs a springless battery contact: 100 stücke Batteries chrapnell aa oder aaa Batterie feder 5 Nr.…
I did not print it yet takes a 130 motor. This is a Hess industries product (not in scale with the model 2)
Learn about this excellent game at https://www.newmillindustries.com/store/p/lepidoptery-preorder Lepidoptery uses a Connect 4 style board, but the problem with Connect 4 boards in reality is that they drop all the columns at once. This…
Prusament PETG; Druckdüse 0,4mm; Schichtdicke 0,15mm “Quality” Druck auf kleinerer schräger Fläche, so dass alle Winkel größer oder gleich 45° sind → keine Stützstruktur nötig.
use any motor with a 2mm shaft
print, buy a led strip and you have an original desk lamp
3mf files compatible with bambu studio for multi-colour print
Replacement cover for "LSP Industries" stamping fluid reservoir model: P312-C Cover part number per "LSP Industries" BoM: COV004
A Lumon Industries Lightboxes that I created. The files include versions with and without a wall hanger and a hole for a wire passthrough. Just choose which look you prefer, a blue or whited face. I hope you enjoy!
A minor remix of Jamie's Gridfinity openSCAD glue_stick holder so they can hold 4oz bottles of Bob Smith Industries ' Epoxy bottles and an eRocket's Glue 4oz glue bottle. I'm new to openSCAD, and my changes were brute force and may break…
Printed and built my own Severance-inspired Bluetooth Lumon Industries speaker designed by Adafruit. Wanted a fun way to make it more authentic, so I made a cable tag! Put this on anything to yourself feel like your innie. Add a filament…
While the work is indeed mysterious and important, Lumon hopes that this plaque will provide reflection for you on the equal importance of following the Lumon way. There is also a convienent stand so that you may display this in a…
More information about building this can be found here: https://github.com/OminousIndustries/SocialRobot Here are the printing instructions for all files: Printer Requirements Build volume : Minimum 256 mm × 256 mm × 256 mm. Material : No…
The Progressive Industries hard wired EMS units and surge protectors have the option for a remote display (pictured). If you want to have the remote display in a place where it is visible inside the camper, you will get the flashing red…
Print settings etc: Printer: Bambu Lab A1 Filament: 3D Fuel PCTG Filament Profile: 3D Fuel's PCTG Profile for A1 Infill: Increase wall loops until 100% ___________________________________________________________________________ I made…
Organization station made to hold 2 x 2oz and 2 x 1oz Bob Smith Industries (BSI) CA glue bottles, 1 2oz BSI Insta-Set spray bottle, 4 long hex bits, and a pen/tool cup. I designed this since I really needed a way to keep these glue…
This is a recreation of the aluminum head bed plate on the BI V2.5 with thermistor hole and side cutout in the correct positions, it would be trivial to modify if you wanted to have a thicker custom plate cutout to replace the current…
Morninglion Industries 3DLS Print Settings Printer: Mingda D-2 Rafts: No Supports: Yes Resolution: 200 Infill: 30 Filament: UnKnowen PLA Category: 3D Printer Parts
Show your support for Hudson Printing Industries with this stunning two-color plaque! No AMS/MMU required! For the inverse (background is taller) swap filament at layer 11 if using .02 mm layer height. I recommend using a lighter/brighter…
Make bigger or smaller if you want. I suggest making all the letters connected in a remix if you want it hung up or something. There are no supports, and it takes 2 hours for an easy and smooth print.
Our shop's logo, QR code, colors. Sorta kinda. Thanks for stopping by. We do cool stuff, and we're glad you do too. For more cool stuff, mosey over to dirtfarmerindustries.com. We'll see ya there.
I designed this coaster for your mugs with stark industries branding.
Knight Industries logs filament shield Based on the TV show Knight Rider Space for one 6x3 magnet for stability.
We put a Durham Bull's color theme on a DFI MakerChip. It's fun and so are we. Check it and us out. dirtfarmerindustries.com
Reckless Industries presents the RIHS (Reckless Industries Holster System) Developed over the last 10 years to fit my needs. Modular Design: parts can be replaced or updated for new items Articulation: 2 main belt mounted panels that can…
I suggest only using these temporarily, while you are able to get a new window sash ordered. Start by measuring your original window sash against the drawing given. If it doesn't match, this won't fit. FreeCAD files are included so you…
A 40mm fan mounting structure for PC104 expansion card slots. Two pieces are available as print files: the structure and the securing clips, which must be printed in batches of four.
Only AI was used was for the LOGO. I did all the modeling and tracing myself
This is a simple Keychain with a logo of Endfield Industries from Arknights:Endfield. The model was done with the extraced vector image from the game itself, and then modeled in blender. This project was done purely for personal use, as…
Following the success of the popular Jupiter Industries Martianball shoe, the O2 Max, Jupiter Industries has used that technology to design an updated and more technologically advanced door stop for the Printables door stop contest.…
Abstergo Industries - Assassin's Creed - Key chain - Portachiavi - Porte Clès - 钥匙链 https://assassinscreed.fandom.com/wiki/Abstergo_Industries Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx…
An AR MLOK Compatible Foregrip. 20 Degree angle, oval grip, jazzy pattern stipple. Great for high power airsoft. Suggested to print in fine detail, from an engineering grade plastic, with only supports on the bottom 10mm.
![Prism Arms - K-Industries "Strike" Pistol Grip [For VFC M4/AR GBBR]](https://media.printables.com/media/prints/42f3c46a-42cc-4d5a-a297-383f5528edea/images/10361191_bdee274f-2411-454e-aa6d-c79876cb6740_4e4cba5b-2a49-41be-950f-53fbb70cb871/20250731_102105.jpg)
![Prism Arms - K-Industries Snap On Flared Magwell [For VFC and Vipertech M4/AR GBBR]](https://media.printables.com/media/prints/f3a951ce-22db-42c8-9298-20822710f549/images/10442023_e399e830-748f-4f3d-8001-6d643039444a_15f9fc5a-6c64-42da-8155-6e5445ff795c/20250812_165710.jpg)
