Counting matching models…
1. Inibisce le alghe verdi e promuove la crescita delle piante -Inibisce la crescita e la riproduzione iniziali del fitoplancton. -Attiva i oligoelementi per promuovere la crescita delle piante La promozione della crescita delle piante…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
The cheap insect screens are mounted with only a Velcro strip. It is helpful to use such a tool, with which the net can be pressed into the nubs of the Velcro strip. CAD Design…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Wing mount for popular RC aircraft Volantex TrainStar for two MPX connectors. two wings center clamp two MPX connectors mounting for flaps/ailerons/lights bottom part with adjustable connecting length. Best fit! Installing the wing in one…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Do pobrania Listwy Elektroinstalacyjne, do maskowania przewodów i kabli, listwy dodaję o długości 250mm i w następujących rozmiarach wewnętrznych: 1 . Wysokość 10mm i szerokości ( 15mm, 20mm, 25mm, 30mm, 40mm i 50mm) 2 . Wysokość 15mm i…
I wanted a top spool mount for printing TPU, but so many I found were big, bulky and looked like permanent installations. I designed this to be easily slid on and off the top chasis of the K1 and K1C. There is enough clearance from the…
Flooring Spacer for Installation of Laminate/Vinyl/Wood. For 1/4” & 1/2” Gap. Designed to stay in place
Keep your photos organized and protected. Has 5 separate compartments so the photos will stay upright. Will fit 5 x 17 photos. Print with flat sides on the print bed. Printed at 0.2mm layer height.
A quick and dirty flash cover/diffuser for the Instax Mini 12, which sit more flush against the camera body than the Instax 11. This cover sits flush against the flash, and does not ‘snap’ on securely. I prefer using a removeable adhesive…
This is an easy-to-install version of Tesla Model Y's 2nd row seatbelt guide. You just need to snap it onto the head rest rods without the need to take them out (which isn't straightforward if you don't know how). I also found the…
So i made these cases to fit an insta360 x3 camera with the lens guards, it has a tpu insert that holds the camera in place and should be soft enough to not damage the lens. it also should fit the camera without the guards and without the…
Do you love Gridfinity? Do you love magnets? Do you hate installing magnets into your Gridfinity bins? Well, you aren't alone. I've always found it to be a particularly fiddly process to make sure you have the right polarity and to keep…
Not the cleanest scan since it's all either black or reflective. But should be good enough for designing mounts or adapters.
Entzückende Flexi-Katze mit Herz! Dies ist eine süße, voll bewegliche „Flexi-Katze“, die in einem Stück gedruckt werden kann. Keine Stützen nötig! Sie verfügt über ein niedliches Herzdetail und ist somit das perfekte Geschenk zum…
One of my Unifi Protect G3 Instant camera is standing on a high cabine but needed a bit of a down angle (25 degrees) to get a better picture of the whole room. Unfortunately, the default camera can only stand straight up, or needs to be…
Description After Hurricane Helene, Western North Carolina will be without power and water for a long time. Personal hygiene is a widespread issue. Standard plastic bottles are easy to obtain and can be distributed or filled with water…
Raspberry Pi Zero 10" Rack Mount Bracket Panel - Staffa installazione Pi Zero rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col Update: 06/02/2025 added resized model…
I needed a way to mount a wooden dowel through the face of a panel. This design uses a compression collet to grip the shaft and hold it in place. Printed with .2mm layer heights & 30% infill. Category: Household
Printing : Print 1x main body and left/right side. Print 2x side clip for each additional layer. Print 4x strap per layer (works for me) No supports. .2mm layer height Quality defaults How to use Determine how many levels you will need by…
Raspberry Pi3- Pi4- Pi5 10" Rack Mount Bracket Panel 2U - Staffa installazione Raspberry PI 3-4-5 rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col Update: Added versions…
To complete the model following parts are needed: 4x led white 3528 2x Led red 0805 4x SMD Resistor 1K5 1206 1x esu 51968 or LaisDcc 860042 2x M2x4
a 3d model for mesuring or making custom mounts.
Piranha Plant Piggy Bank - a Instant Tea Container Conversion This Project escalated quickly. Why? Because i only wanted to create a Lid for my Instant Tea Container! Prolog: I use an old Instant Tea Container as a Piggy Bank to collect…
I wanted to make a bed knob that didn't need to use a soldering iron to install and get rid of the last red parts on my printer. Below are the steps you take to install and also I've posted some pictures for reference. 1. Print the knobs…
Summary: This model is an addon for a Cartographer installation, e.g. like my model version 2 of the mount and shroud that can be found here. https://www.printables.com/model/1277242-k2-plus-cartographer-mount-and-shroud-custom-pcb-p I…
See https://www.printables.com/model/507270-harvestright-camera-mount for @dgardner_169337 excellent solution. I need a new bracket to fit the camera that I had. It needs 4 x M3 x 12mm bolts. Printed in PLA+ with 15% infill, can use other…
Arduino UNO 10" Rack Mount Bracket Panel 2U - Staffa installazione Arduino UNO rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025 Update: added resized models…
English below De planken onder deuren van het IRM model van Lima onderbreken en voor het rivarossi model zijn dit kwetsbare onderdelen. Dit is een model voor dit planken. Printen is eenvoudig, de onderkant is plat, en verder de meest…
Little thing for better safety :) printed on sla with tough resin. I am not sure if the fdm printer can handle this fine
Bullet time realizzato completamente da zero. Stampato in PETG. Quello che serve è: 3 cuscinetti che si trovano su amazon 626ZZ 6x19x6 4 viti a brugola M4 (per chiudere il coperchio) lunghezza 10, 16, 20 vanno bene tutte, i fori sono…
I had issues with installing remote topcap on my Fox Later i found manual how to do it (https://tech.ridefox.com/bike/service-procedures/851/2018-fit4-remote-topcap-interface-part-installation), and Fox recommended to use special tool…
A 3d model of a jet bridge for 3d printing at small size. Can be installed into cardboard or other material. Compatible with most narrow-body and wide-body aircraft.
LINKS: MICRO USB NODE MCU ESP8266 MAX7219 FIRMWARE: Google Disk Yandex Disk Help and assembly: on video
This holds a Tentacle Sync E inside the stich line making it invisible when shooting 360. I was tired of using velcro, and Habr had made a very nice case , so I moved the shoe where it needed to be and added small bump stops to make it…
Either modify an existing printed part, or print this model with standard RatRig printed part settings and recommended materials. It's really easy to modify an existing part and likely has negligible structural impact. Modifying an…
tg73 have a very good instruction https://www.printables.com/model/943447-v-core-4-toolhead-easyfit-mod-removeinstall-the-to
English: Prusa MMU3 Straight PTFE Tube Adapter with PC4-M6 Push Fittings 📹 Video link: https://www.facebook.com/100000655244863/videos/pcb.5323751667850647/1730651454805405 Description After many hours of printing with the Prusa MMU3, I…
I use this cool shelf bracket to hold my shelf up. It is quite strong and make sure the infill is sufficient.
;) Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 10% Filament: any PLA transparent Category: Camera
Im Baumarkt hab' ich kein solches gefunden, deshalb hab ich selbst eins entworfen, vielleicht hat ja noch jemand Verwendung dafür. Manchmal reicht ein Element um sein Schalttechnisches Ziel zu erreichen. Einfach ein Stück Hutschiene (max…
6-1-2020 Updated to version 3.0. Previous design was generated from the original mesh and had a few issues that made it not workable for updates. This version is a complete redraw as a solid model but retaining all the same features. Per…
These will fit most hoodie draw strings or shoe laces. Enjoy!
Print with transparent petg filament. Temperature max 220 degrees. Slow feed. Led WS2812B COB - 160Leds, 5mm PCB…
This is a fully 3d printed mechanical lens swapper for the CMF phone 2 pro. Quickly swap between your normal camera and your lens with the spin of a gear! As a bonus, it only adds 1mm of extra thickness vs the normal backplate.…
Both of my center brackets on 2 separate Mainstays brand clothing brackets failed and broke for a total of 4 brackets. so I created in Tinkercad a bracket and a sleeve for the part that broke to begin with the part fr the horizontal bar…
Insta360 Go mount for Five33 switchback. Print in TPU example footage in FlowState mode: https://youtu.be/TU-s9ToI6Ho Category: R/C Vehicles
Ich habe das Modell auf dem Bild mit meinem Cobra 3 V2 gedruckt, mit einer 0,4er Düse und der Einstellung 0,2mm (Das erste Modell das ich gedruckt habe mit der Einstellung 0,16 ist allerdings deutlich besser geworden). Verbunden Werden…
Simple coinstand for 52mm coincases. Mine is for a John Wick 1oz silver coin. No supports needed.
Features of my interpretation of a portable electroinstallation level: Horizontal and vertical level 6 mm center rod for drill guiding 6 mm reinforced drill guides with distance marking 71 mm and 142 mm distance from center rod for 2 x…
Excuse the color variations in the plastic
According to the Micron R1 CAD, the distance from the front of the bed to the back of the extrusion should be 23 mm. Photo courtesy of @xx_maverick_xx on Discord
Quick and dirty phone stand a friend wanted. See the BB lazy Susan at https://www.thingiverse.com/thing:1953369 for assembly instruction. 11/8/2021: added SpinStand for "Fat Phones". 11/10/2021: added "SuperFat (14mm) and base only stl…
My Insta360 selfie stick broke. Therefore I created a fix for it. It consists of two parts: Body1 and Body2 You can just print both parts standing without supports. I used 3 perimeters. For assembly 4 M3x8 and 4 M3 hex nuts are needed.
Hold your split loom installation tools in one convenient holder! Screw holes on the bottom and back allow for fastening to a vertical or horizontal surface. Designed around the Electriduct split loom installation tools, but others may fit.
BMW in their infinite wisdom doesn't include any kind of template for installing badges on their cars, just some written instructions and measurements on the TIS that are a nightmare to layout accurately on the car. I wasn't going to do…
This product uses gridfinity system. So you can easily stack it or organize layout. The two attached files work together as a single product. The bottom part goes to the bottom as a stand and the top part goes to the top, holding the…
Metti alla prova la tua coordinazione e i tuoi nervi d'acciaio con il gioco dell'equilibrio instabile! L’esilarante gioco dell’equilibrio stampabile in 3D! Ispirato ai classici intramontabili, questo gioco offre ore di divertimento per…
A lightweight circular wire rack to lift ferments (like tempeh moulds) from the bottom of the instant pot. The metal one left rust spots and didn't lift it enough from the water bath, so I made my own. Print in something heat resistant,…
Vertical stand for the Ubiqiti G4 Instant. It uses the included adheasive and wall mount to secure it to the stand. onshape: https://cad.onshape.com/documents/f70a2de22527961ceee11555/w/60c64aa6690a55d3a0949aab/e/feb026e59b50d9787c273824
70mm-diameter-hook for isolated heating-installation-tubes to hang up stuff to dry 70mm-Durchmesser-Haken für isolierte Heizungsrohre im Heizungsraum zum aufhängen von Dingen
Parameters: Printer used: Prusa MK3s Filament: PLA+ I have printed these parts with a single extruder. Imade stops to change the filament in the first 3 layers (0,2mm each). If you need a help to print in 2 color: here you have a…
simple mount. please understand layer line weakness before printing. small frame may show on sides if full 360
UPDATE: A working print head mount is now posted. My original was too high and would not home successfully. And Valerie Moore did a nice cleanup job on that if you are a perfectionist and want the nicest looking hidden surfaces! I have…
Tool to install front seal to Mopar TorqueFlite 727 transmission while transmission is not disassembled. Printed in PLA
Chainstay protector that perfectly fits the contours of the Trek Remedy. Might fit other frames like the older Slash too but i haven't tested. I had problems with the chain damaging the frame on the inside of the chainstays. This solves…
Simple coinstand for 52mm coincases. Mine is for a John Wick 1oz silver coin. No supports needed.
Elektroinstalační krabice do zateplení Pro kompletní sestavu je potřeba vytisknout tubus + libovolný nástavec podle druhu montáže. Tubus má délku 180mm a nástavec 20mm takže sestava je pro zateplení tl. 200mm. Pokud potřebujete menší…
Arduino UNO 10" Rack Mount Bracket Panel 2U - Staffa installazione Arduino UNO rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025 Update: added resized models…
Upgrade my ender 3 to base Boron and Klipper and the screen in the botton was not helpful when put the enclosure
Raspberry Pi Zero DIN RAIL Mount Bracket - Staffa installazione Pi Zero su barra DIN 7.5mm Suitable for: DIN RAIL 7.5mm IEC/EN 60715 TH 35 - 7,5 https://www.printables.com/model/885933-desktop-din-rail-stand-7590-degrees-supporto-barra…
edited parts: BL - Outside Door Block V4 - tested on my enclosure with mk4s BL - Long Outside Door Block V4 - not tested yet Printed with PETG. 0.4 nozzle, 0.25mm Layer For better seal of the plexiglass to the enclosure, i did put m3…
Englisch: A practical tool designed for effortlessly installing percussion caps. I use it specifically for my 1081 caps. Unfortunately, the ones I found didn’t fit, so I created my own. Deutsch: Ein praktisches Werkzeug zum mühelosen…
Width: 120 mm Height: 120 mm Depth: 200 mm Electrical Installation Box for Insulation This electrical installation box is designed for mounting in insulated building facades. It ensures the safe housing of electrical components such as…
a modefyed mount with the 24,5mm appar side to side and 34,5mm front to back also i addet a front brace to keep the cam extra secure and addet a cutout for the lens of the go3s
Easily mount your UniFi G3 / G4 / G6 magnetically into the corner of your Core One, just like the Buddy3D camera. Requires 6x 10x5x2mm neodymium magnets, and uses the ¼" bolt from the “foot” that comes in the box with the camera, so no…
This is a project I've been working on for some time now; It contains a Pi Zero, a thermal printer that can print stickers, a pi camera, a 1200mah 2s lithium-ion battery, and some power circuits. A short press on the green button takes a…
Door Frame and Bolts with more clearance for easier installation. In door frame i cut the slides a little bit and alt the bolts I made the space in the slides bigger.
The intent of this model is to better capture POV footage so that it is more inline with what your eyes are actually seeing. The stock hat mount that comes with these cameras is OK for this, but it situates itself so far forward on the…
This is a tripod for e.g. the Insta360 invisible selfie stick or any other camera mount with a standard ¼ inch screw mount. It's a remix of @OurAngryBadger very good remix. Required Parts 3× M3x16mm screws 3× M3 nut 1× ¼ inch screw,…
Models from the YouTube video, "8 color printing on the Neptune 4 Max (part 1)", for installing CoPrint's KCM Set on the Neptune 4 series of printers. https://youtu.be/HRHlSdWBTfk CX-I extruder mount versions: Version A: All M4 hardware…
Ever want to use a retro camera but put off by the lack of modern technology in these cameras? Now you can have the best of both worlds! Turn your Ace Pro 2 into a mini retro camera with 3D printed housings. Come with 2 interchangeable…
I printed them with 100% infill using PLA. I froze the bearings/seal and warmed the jet pump housing in my kitchen oven at 200F. Then I used a dead blow plastic mallet to pound them in. Tools are still in great shape and show no…
I just changed the base to allow the screw/bolt to be screwed into place. I also made a recess in the base to hide the screw/bolt head. Use the original feet from the original model.
Snaps into the small recess behind the lens and can stay on the AcePro. On the other side it press-fits the FSTOP-LABS filters. The press-fit is not as secure as the original magnetic mount, so I wouldn't rely on it for action sports.…
Mount for the Insta360 Go Ultra Camera Pod. Attributes: Securely holds camera pod to be mounted to GoPro style mounts Side opening allows for Large USB-C cable to be inserted Side opening allows for camera release button to be pushed Side…
The Magnet Guide Stick is a practical tool for safely and accurately installing magnets without mixing up polarities. It works by using an internal magnet on a slider mechanism, controlled with your thumb. Pressing the thumb knob moves…
selfie stick ski pole mount (insta360) with 5 mm nuts and compatibility with ski poles with triangular section. Print with PETG, ABS or similar materials. V2 reinforced. Included stl: clamp body Collet and cover must be downloaded from…
EN: These are two 3D laser scans of a Panasonic ES-LV67 shaver using the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. The scan on the left (green) is from the Sermoon S1 and the one on the right (orange) is from the…
This compact tool makes installing and removing RC car ball joints fast, easy, and damage-free. Designed for 1/10 scale vehicles, it allows you to press ball ends in or out smoothly without stressing suspension arms or links. The tool…
Shelly BLU Motion Wall Mount Bracket - Supporto installazione a muro Hardware: 2 pcs Screw and wall plug as per assembly requirements Suitable for: ShellyBLU Motion smart Bluetooth motion detection sensor…
Protective holder for a spare Alpinstars Tech-Air 5 Cartridge. Share your Make :)
A) NOTICES (herunterscrollen für deutsche Version / scroll down for German language version) Non-commercial provision of construction files in . stl-format for a chainstay frame plug for my Specialized Tarmac SL8 Pro road bike by the…
I designed this container so that I can always carry the spare batteries for an Insta360 One X with me in a compact form. It is best to print it with PETG without support and infill 100%.
This NFC Tag and Stand is ideal for businesses, retail, and office environments. Easily scan NFC cards, tags, or devices for contactless payments, check-ins, or information sharing. Durable and compact, it keeps your workspace organized…
Showcase your memories with a little love this Valentine’s Day! This Polaroid stand is the perfect quick print to display your favourite moments with some Love. Printing Instructions: Frame & Base: Designed to print without supports and…
To convert the Mamiya C33 camera into an Instax version, the required 3D printed components are needed
Love Inside – Das Herz, das erst beim Brechen schenkt! (DE) Dieses Herz ist mehr als nur Deko: Es wird komplett in einem Stück gedruckt und besitzt eine integrierte Sollbruchstelle in der Mitte. Während des Drucks kann/sollte der Prozess…
I created this photo frame to display my Instax square photos. Easy to swap out photos. Assembly: Place the photo in the front frame. Slide in the back piece from the bottom until it clicks into place. Place it into the stand. Notes: To…
Eine kleine Pralinenschachtel um jemandem eine kleine Freude zu machen.
🇩🇪 Beschreibung Ich hatte immer Probleme die Bremsklötze von Magura Felgenbremsen in allen Dimensionen korrekt auszurichten (vermutlich eine Frage der Übung …) Mit dieser Lehre ist die Montage ziemlich einfach: Die beiden Schablonen…
Dieser Serviettenständer ist sehr stabil und durch das zweigeteilte Design sehr einfach zu drucken und auch frei gestaltbar, Sie können die Motive (Herz und Rose) kombinieren und auch verschiedene Farben zusammenstecken. Die beiden…
