Counting matching models…
Vague for the next week im leaving for the outback in a few hrs. Requires a 65mm length .3mm thick brass strip 12mm wide and a way to drill a 3mm hole in it. Build Guide WIP sorry, but at least its here this time! Im back the 25th at the…
Safety eye installer printed in ABS 0.6mm nozzle with 4 walls and 20% gyroid infill.
Simple tool for installing the Star Fangled Nut on a bicycle fork. Guides the installation straight and sets it at a precise depth of 15 mm. Print will have a one layer skin across the bolt hole - this is to make it print well. just push…
2JZ Cam, Crank and Rear Main Seal Installers
Hi, This design is based off the Pure Grip Green Attachment used to install golf grips: https://www.puregrips.com/products/pure-green-attachment The cost for the item is not expensive if you live in the US. However, the shipping cost to…
This tool is designed to assist in installing the Teflon seal on a fuel injector for a Ford EcoBoost engine. Before using this tool, depending on your printer, you may need to sand the guide part smooth. Simple instructions for this model…
This tool is used to remove and install the spark plug tube seals on a ford 3.5l engine. The ford part number is 303-1247. I guessed the dimensions by measuring my engine and looking at pictures of the real part. Print with a lot of…
Used to properly install a rear main seal on Subaru FA20 engines (BRZ / FRS / 86 / WRX) ensures the seal is installed at the proper depth. I used this on my 2013 BRZ.
It can be a bit tricky to get the tool lined up, but once you do you should feel it ‘snap’ onto the seal. Gently rock the tool back and forth as you pull and the seal will eventually release. Installation works the same, just in reverse.…
When changing a CV axle in a 2010 ford focus I damaged my axle seal. I thought this would be an easy swap, but little did I know Ford used the worst seal design I've ever seen. After trying 2 times and ruining 2 seals, I looked online for…
Useful links first Download PDF User Manual (Build guide) Github repository with the software installer Latest script release page Support thread on Prusa Forum Introduction This is a small modification of Prusa Enclosure which offers an…
Multiple versions of the tool are provided so you can choose the thread size that is most convenient for you. Both imperial and metric are included (see the Files tab for details).
This tool is used to install the drive pinion oil seal for the rear diff on a ford flex (and other ford models). The actual ford tool has part number 205-208. I guessed the dimensions by measuring my diff and looking at pictures of the…
The tool to guide the star nut inside the bicycle fork
Zum Verlegen des Mähroboterkabels mit dem Winkelschleifer den Rasen aufschneiden und mit dem Verlegerrad den Draht reindrücken. Material: Für den Zusammenbau benötigt man ein 10x10mm Alu Profilrohr oder Holzstab und eine M4 Schraube mit…
If you want to help support the development of my designs: https://ko-fi.com/rwills
For the Buell fanatic in all of us (and I know you're out there), there are some essential tools for the DIY mechanic. This is one of 'em... but this simple gizmo costs quite a fortune:…
This is a work in progress Printed it with ABS 60% infill to make sure it was solid enough to handle getting hit with a hammer. If printing on the seal side, which I did, I used organic supports.
This oil seal installer helps to evenly drive oil seals into place. This one has a 60mm depth to help clear the shaft. You can also run a bolt and a washer through the center to help apply even pressure to the seal. This exactly fits:…
Went ahead and redesigned this to be more installer friendly by adding an indentation for your finger. Category: Parts
This is a DIY Brake Caliper Dust Boot Installer Tool designed for Volvo P2-platform vehicles, including the S60, S80, V70, XC70, and XC90. The tool is fully 3D-printable. An integrated M8 hex-nut bump in the center allows the tool to be…
Designed this simple diff output seal installation tool for my E92 325i (3.0L). It makes installing the seal easier and accurate. I would recommend printing it with a high infill density to give it strength, especially if using PLA, and…
Very simple version of a Makera Bit Collar Installer using any kind of clamp.
This model is a 3D-printable version of Land Rover special service tool LRT-54-003 . The tool is used during rear axle hub service to install / assemble the hub seal by keeping it aligned and helping it seat squarely in the hub/bore. If…
This is a simple socket for installing (and removing) the Rock Shox rear shock bearing kit. It designed to accept a 3/8" socket driver. I recommend printing it solid (100% infill). It's only a 10g part. It should be fine, even in PLA, to…
This reduction sleeve is designed to assist with the installation of an axle shaft seal, based on OEM part 806732210 . It ensures proper alignment and even pressure during insertion, helping to prevent damage or deformation of the seal.…
Output shaft seal installer tool. Seal must NOT be pressed fully in, because there is oil hole behind (as you can see on photo). Works even with the ring installed. Internal grooves prevent the shaft from rotating during tightening.…
tool to install rings that hold topcaps on front DT Swiss 350 hub process shown on video
Designed for Presto 12-cup percolator. You may have some stringing between the tall prongs. The tips of the prongs are to prevent installation of the percolator top by accident. Insert the wrap-around filter most of the way down by hand…
A simple Gridfinity holder for the Lisle 22800 wheel stud installer. Shaft Specs: 30mm height, 13mm diameter 6x2mm magnet holes Infill 15/20%, 2 or 3 walls, 0.2mm PLA+/PETG Would recommend a decent infill as the installer has some heft,…
This little tool came out of the frustration of installing response pads completely flush with the interface without needing to keep pressing in with my finger. Print with the ring facing up and brim for stability.
This is not a great design; please improve it! It fits on the end of a broom handle. If it's a loose fit wrap a few layers of tape to the handle until it fits tightly. Slide the thumbtack on top so the string attached to the flypaper fits…
This is so simple it's kind of dumb, but it was useful for me, so maybe it'll be useful for you. Use it to hammer in the input seal on a TKO front bearing retainer. The center hole is ½-13 thread, so you can put it on a bolt to make it…
I printed them with 100% infill using PLA. I froze the bearings/seal and warmed the jet pump housing in my kitchen oven at 200F. Then I used a dead blow plastic mallet to pound them in. Tools are still in great shape and show no…
This model was made for people who do not want to spend another 60$ for seal installer while overhaulin your NAG1 (722.6) transmission for your Chrysler, Dodge, Mercedes and many other cars and brands. The photo of the installer is just…
This tool is used to install the rear brake boot seal on E39s. This has been tested on a facelift E39 540i with the Better Brake Parts rebuild kit (41491K). Printed in PLA with 60% infill. You can definitely do less infill for faster…
Front crankshaft seal installer for the 3.5L ecoboost engine. May fit other engines. I am using the Blupoint master harmonic balancer installer kit to aid in installation. A rubber mallet could also be used lightly. The seal goes in…
Colocador en tubos / Tube installer
This tool helps to install a captive nut in a cavity during a build. A captive nut is set in a cavity during a print, and the print continues around it, leaving it trapped inside. This is a great way to include a threaded joint in a 3D…
Just a small Gridfinity bin for the Makera Z1 Collar installer. Get the FreeCAD model: https://codeberg.org/uwearzt/freecad/src/branch/main/lab/gridfinity/makera_collar_installer.fcstd
Milwaukee M12 installer plate and chuck holder built for the GOEWS wall system. Included parts: the installer plate (about 48 x 103 x 46 mm) and the chuck holder (about 212 x 63 x 30 mm). STL and STEP files are included, plus a Bambu…
A simple installer for the front crank seal on 2014 Ford Focus ST. My son was doing his timing chains and wanted to see if I could make him a seal installer. I designed 2 different ones, on for a 3/8 and 1/2 inch extension, depending on…
I printed them with 100% infill using PLA. I froze the bearings/seal and warmed the jet pump housing in my kitchen oven at 200F. Then I used a dead blow plastic mallet to pound them in. Tools are still in great shape and show no…
This oil seal installer helps to evenly drive oil seals into place. There are three lengths here to help clear the shaft. You can also run a bolt through the center to help apply even pressure to the seal. This exactly fits: Toyota Type T…
This is a holder for Milwaukee M12 Installation tool driver chuck holder.
Printed in ASA, on a Core ONE using the 0.2mm STRUCTURAL PROFILE added a 5mm brim satin sheet
Used this to rebuild my 371 blower, not recommended for daily use but to build one or two blowers it will be fine and much cheaper than buying the actual tool. (Includes correct depth setting for seal as per service manual) Category: Hand…
This is a fairly simple Het-Set thread insert tool. it's simple to build and can be put together for $20-30 if you have a soldering iron that fits (soldering iron is fairly cheap if not). Other things needed: 20- m3x8mm bolts 20-m3 t nuts…
I printed it in PLA+ with 40% adaptive cubic infill. The side A recess handles covers/lids from 2.638" (67,0 mm) to 2.815" (71,5 mm) in diameter while the side B recess handles covers/lids from 2.815" (71,5mm) to 2.935" (74,5 mm).
This kit is made to function either with 8mm rod, nuts and washers or with a small vice. Currently the 6808 variant is untested so it's not shared yet. Use installer bit to insert a bearing you have removed with the remover bit. Printed…
