Counting matching models…
The Ripper mask, an iconic piece of chaos from Borderlands 4 , is now available for 3D printing. We've designed it with handy attachment points for straps, making it easy to create and wear. AVAILABLE NOW! Get your copy of Borderlands 4…
I had a vision of a pop-art, digital, illustrative style drippy paint bucket and had to make it come to life! I designed this entirely in Fusion360 and printed on Prusa MK3S and MK3S+. All parts print and fit together well in PLA at .3mm…
This clip is actually a working zipper with rows of little fingers to cinch your bag shut. It does require some assembly. OK, the work required for this bag clip is way more than any bag clip should require, but once assembled, you'll…
Print with 0 infill, 0 top layers, and 3 walls.
Simple protective case for the Flipper Zero Wi-Fi Module v1 development board. Flipper Zero Wi-Fi Board Docs: https://docs.flipper.net/development/hardware/wifi-developer-board Models Available: Full Case Requires 4x M3 screws/nuts for…
Hi There. Some time ago I was looking for a model of a shipping container with a sliding cover, but couldn't find any I liked, so y made one myself. The print you can see is at 60% scale of de model. Anyway, I made the model in Fusion 360…
Please don't forget to hit the like button if you find this model useful. This is a 3D printable replacement slider for both standard and reverse bale zippers. A key feature is that it can be installed without needing to unsew the zipper…
We are thrilled to announce the release of our successor to KLAMMA, the culmination of countless hours of design work and dedication. This new version represents a significant milestone in our journey, building on the strong foundation…
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
Might be slightly over-engineered, but I always keep a few different sizes on my key-chain. That way I'm always ready, when a zipper pull on or around me breaks. Saved me and my friends a bunch of times already. Print recommendations:…
**9/26/22** Updated model that uses 4mm screws with larger hinges and a small insert for an SD card in the top shell. Enjoy! Might revise the hinges since they seem like a weak point. I needed to drill the holes out a bit but other than…
Please don't forget to like - I want my Prusameters! 😄 If you update from a previous 3.x beta, make sure to read the Release Notes, contained in the download. If you update from an 2.x release, please read the Setup Guide, contained in…
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
Use Calibration Bro to calibrate your printers X & Y E-steps, and Skew. Its a free alternative to the Califlower and/or Calilantern. Print Calibration Bro. Wait for it to cool down! Don't compromise the shape by removing it while hot &…
This is my approach for a mostly 3D-printed Wire Stripper — a functional and robust tool designed to strip wires cleanly and consistently. I wanted to create something that anyone can use, whether you’re a maker, hobbyist, or handling…
Simple vase mode flower vase. Openscad code included. I printed on a MK3S with a .8 Revo nozzle, using PrusaSlicer's .4mm quality preset plus vase mode. Larger nozzle helps to get fatter single-wall widths. Looks good in co-extrusion…
I modeled these after the clipper guards that came with my Surker hair clippers. Mine only came with sizes up to #4, and I wanted more options! This is an updated version from my previous. The “fins” are now much better supported and less…
This is a remix for ikea skadis. You can choose between the diffrent inlays to organice your pens or something else. I have an extensive skadis collection, you can find it here. All parts print and fit together well in PLA at 0.2 mm layer…
The gripper beaks can take the shape of the object they hold, like in this case an orange! Printing it is pretty self explanatory, or watch the short: https://youtube.com/shorts/1ziQGQiweF8?feature=share edit: Just to clarify this is not…
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 22nd Mar 2023 : The model has been updated to v4. A complete rework based on Tripp Trapp Trofast Clip (metal basket) . That model gave me the idea, that it's much better to…
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
I used PLA filament for the model! Print: Nozzle 0.40 mm Layer height 0.2 mm Set the maximum print speed to 80 mm/s in the Prusa Slicer. Ich habe für das Modell PLA Filament verwendet! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa…
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…
Remix from fivesixzero -Case for Flipper Zero Wi-Fi Module v1 minimal case, added the SD card reader cutout to the back of it and added an easy way to press the power and reset buttons since they were a bit hard to press. Link to the SD…
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
This model was printed at 30mm/s with a .2mm layer height in vase mode.
Blade Scraper Print the Blade Scraper without top and bottom infill for such a beautiful design (honeycomb infill). You need to print the white ring 2x and insert it from each side into the hole. Additionally, you will need a utility…
This nipper cutter holder is great for storing the nippers that came with your 3D printer! I added a closed tip onto Muh60's nipper cutter holder model to enclose the nipper blade for better safety. I used OpenSCAD to modify the original…
3D model of a cute hippo . Original file is 50x30x35mm. Can be scaled if needed. Print Settings Example is printed with 0.25mm nozzle - 0.1mm layer height Support is required. CREATE CUSTOM 3D PRINT MODELS ON LAYERMODELS.COM SELL YOUR…
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
This is an articulated dolphin - Clipper. It is flexible, requires no supports, and was designed to be printed in place. Recommended print settings layer height: 0.15 mm infill: 10% gyroid perimeters: 3 supports: no The fin should be…
Introducing the Finger Fidget Flipper : a revolutionary way to stay energized and focused throughout your day. This finger roller flips through your finger like a coin, providing an irresistible challenge that can help reduce stress and…
I remixed Damascus2A's MLOK Handstop V1 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Damascus_2a:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1mm Infill: 99% Walls: 10+…
A replacement zipper pull I made when the one on my backpack broke, and I couldn't find a satisfying replacement. I've used it daily for over a month now, and have no complaints. When slicing the base, please orient it hole-down for best…
This is a complete remodel of the Flipper Zero case. It uses another type of hinges, as the original ones tended to break off. Its also slightly smaller. It prints with no supports. I used M3x20 screws. It might help to drill the hinges…
Items you need: 2 x “4mm x 30cm” paracord. *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). *2 x “12mm” wiggly eyes. Super glue (for the eyes and magnets). *If you do not have…
Moo Deng captured our hearts with her ferocious attitude and insatiable cuteness. From literal snot bubbles while she snores, to biting her trainers knee - Moo has brought visibility to an otherwise ignored species. To honor her, We have…
Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…
New! Version 2 is up, with a more robust ladder kickstand :) As seen on HotMakes episode 148, it's a little firetruck with a hinged ladder and chunky wheels! Video link: https://www.youtube.com/live/jzZMH5YQIHc?feature=share Gratuitous…
enjoy just donwload and like share my design
The Grippy Broom Holder is an upgraded version of the original Broom Holder, designed to provide even more holding force. It features four TPU ribbed grip inserts that are glued to the inside of the holder, creating extra friction to keep…
This takes about an hour or so to print. It is a fidget toy made to look like a Zippo Lighter. I do not want this model to be copied but I do want people to remix this and modify it, but you have to credit my design. Like for example you…
Print with 0 infill, 0 top layers, and 3 walls.
I present to you the cover that I modeled directly around the official 3D model of Flipper Zero. The thickness of the bumper is 2mm It was made with a very soft TPU due to the wrapping surface of the case and the difficulty of inserting…
Tripp Trapp adapter for IKEA TROFAST Mesh storage box. I tested with the french product ( https://www.ikea.com/fr/fr/p/trofast-boite-de-rangement-en-filet-gris-fonce-60518453 ) but it should work with one from any country. The dimensions…
I remixed the Wushu grip from Maverick0197 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Maverick0197:1/WushuGrip:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1-0.2mm Infill:…
I prefer this model better than the original. Lightweight, fast, & easier to read. Print: 1 Bottom layer 0.2mm layer height 1 Perimeter 0 Top layer 0 Infill Set all speeds to 100mm/s, except the first layer speed. Use your default value.…
Ever wanted to play with a Zippo lighter, but without wasting the flint and fuel? Now you can! This is a magnetic fidget toy that resembles a Zippo lighter. It makes a similar sound as the spark wheel of a lighter. For it to work, you'll…
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
Object description: This wire stripper is as the title says, a tool which cuts in the outer insulation of a cable that you can easily peel it off. I made the experience that a lot of professional tools work with a spring mechanism and cut…
2x2 version of Zack's nipper holder with the angle of the holders tweaked so they fit inside a 2x2 square. If you have long tools they will still stick out of the 2x2 area but not nearly as much as in the original (which works better in…
Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8 Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Nipper Holder:…
After the initial version garnered significant popularity, I have now taken the opportunity to update and enhance the 100% printable clamp. What's new? Reinforced design Simplified thread for easier printing Reduced total length How to…
The only other TPU case for flipper zero did not cut it for me, so had to create my own. I would recommend printing this in softest TPU possible, as it might be a bit hard to put it on the flipper. history v1 initial release v2 wider…
This is a fully functional bistable compliant robot gripper for your keychain. In its initial position the gripper is closed, when you push the switch in the middle upwards it snaps into its new position. This opens the gripper. The…
A standalone download for the Klipper ringing tower so that one doesn't have to download the entire Klipper zip file.
Two versions of the Drippy Display Shelfs. The pattern fits together so that they can be hung next to each other to make a longer shelf. Or be mixed up as I have done. Before hanging, I highly recommend printing this model so that the…
Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics. Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and…
For the Multiboard Storage System. The cutters fit standard filament cutters (Creality) or pointy nose pliers. The wire strippers fit the ones in the picture. It may or may not fit a different brand.
Welcome to the Low Rider MMU. This Project has now been superseded by V2 ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as…
If you liked my Zippy Bag Clip , but don't want to clip bags, here is a remix that's just the zipper. I also made it a little shorter so it prints faster. Printing The Zipper piece consists of a base and two rows of pivoting teeth, which…
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
What should i say here? - I designed this clamp for multiple usecases like clamping your Fingers, Postcards, Nipples or Tongue. ************************************** Check out the new version here:…
CUTE KNITTED HIPPO - Print-in-place - Minimal supports required Join my Patreon to get full access!
A simple 20×12 cm wall shelf with additional braces for improved rigidity. You will need 3 M3 screws and nuts for the assembly. A solid ("one piece") version is available as well. For the best possible finish print as shown on the…
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…
Needed some guitar picks, printed them with some grip.
This latest design has major improvement on the hinges and the latch. Design features choose between 1mm or 2mm thickness hinges use printer filament as hinge pins hole for lanyard locking latch access to ports iButton LCD display…
The clip is being used to mount an IKEA TROFAST (42x30x10cm) metal basket to a Tripp Trapp. The clip will not work with the TROFAST plastic bins. I have the 4th Generation Tripp trapp at home. I think it should also fit on the 3rd…
A jig to hold a zipper slide while threading bulk zipper tape through the slide. There are two options, with and without a weighted base. Fusion 360 file included for your convenience. Note: the weight cavity and weight filling hole…
I printed this at 170% scale on an ender 3 with no infill and no top layers.
Hippo Decor . Feel free to scale it as desired. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 Happy printing! All my photos are real and show an actual 3D-printed figure…
Print-in-place toothpick crossbow with compliant mechanism. No assembly, fits 3 spare toothpicks, 15m+ range! Mini Toothpick Crossbow – Print-in-Place Compliant Mechanism (+15m Range!) This is a compact, incredibly fun, and functional…
Kermit Sipping Tea The cup is empty so you could turn it into a Kermit Sipping Tea Key Holder.
I decided to upload the Flipper Zero Case from Shutdown on Thingyverse with insert from RobbS since I couldn't find it here on printables. :) If I just did not see it, please comment with the link to the model and I will delete this…
Decorative Vase, designed to be printed in Vase mode. Like it? This Model is part of a batch of vases I released. Find the other vases here
A set of cat ears with lots of features to (hopefully) keep them in one piece. Bed Adhesion - should stick just fine but some printers might need “mouse ears” Layer height - 0.2mm (finer layer heights with make the top surfaces smoother)…
This is the shell of a flipper zero. Front and back plates so anyone can make their own custom version
Printing All parts are printable without supports. Assembly
Clippy is a climbing clip stick I designed to be affordable, reliable and adaptable. Most clip sticks on the market are ridiculously overpriced, so I made one that’s easy to print and built to last. The screw mechanism lets you attach it…
Robot servo motor gripper
40' HO scale shipping containers. Contains High-cube and normal height containers. Contains a version that has holes in the bottom to insert weights (3/8-16 hex nuts) for better operation on well cars. Use the weighted container as the…
Remix of Glass Slipper with a ribbon. Use super glue to attach ribbon to the slipper.
Case for Clipper Lighter. There is also the Autodesk Fusion 360 and step file for customizing.
Fits into the bottom and top of the “wall-honeycomb-part.stl”. I have mine held together using the tri-hollow inserts where the borders connect, and then a dual-hollow insert on the ends. I may end up modifying the pieces into a left and…
Flipper Hard Case V2 of.stl is a open face case for a Flipper Zero to access the screen, buttons, USB, IR transmitter and GPIO pins. Flipper Hard Case V2.stl is a full hard case This version does not require hardware as it uses folding…
UPDATE The camera mount was working but when there were fast short movements with many direction changes it started to wobble. I added a V2, it doesnt look as nice but it is more stable. If you are into timelapse videos then you…
Reloading primer flip/flipping trays. The flip tray comes in three sizes: 50, 100 and 125mm (2", 4" and 5"). For reloading with standard primers the 100 mm tray is great (common used size), but reloading with Federal, the larger 125mm…
This one is just a little bit smaller than the original one. It holds the nipper better. If it doesn't fit the nipper, you could first warm up the walls with a lighter. From my experience, it creates the best fit. Category: Tool Holders &…
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
You need foam from the shipping box and M3x30 screws. I know there is another ready-made model but it didn't suit me so I made my own.
These are two Wahl clipper guides in 2 inch (50mm) and 1.5 inch (37mm) sizes. Should work with most 1.87 inch (47.6mm) max. wide Wahl style clipper blades. They are intended to be used with the clipper horizontally, on the side parallel…
Rename all configs from .ini to .cfg ← Configs Rename Robin_nano.ini to Robin_nano.bin ← firmware Check the ReadMe.txt for more info Category: 3D Printers Comes from: https://github.com/nehilo/Klipper_KP3S
Listed below are some changes that were made. Switched to use M3x25mm screws, nuts, and optional washers. Moved the Flipper Zero to the bottom of the case and moved the devboard compartment to the top. Added Flipper Zero text & logo to…
